Root instrumentation with an erbium : yttrium-aluminum-garnet laser: Effect on the morphology of fibroblasts

Objective: the purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet laser instrumentation of root surfaces on the morphology of fibroblasts from continuous lineage. Method and materials: Dentinal slices with 4 mm(2) of surface area were obtained from teeth extracted for severe periodontal involvement. Specimens were assigned to one of three treatment groups: group 1, application of the laser with an energy level of 250 mJ at 103 pulses per second; group 2, application of the laser with an energy level of 80 mJ at 166 pulses per second; and group 3, similar to group 2, but with concomitant water irrigation of the device. The specimens were incubated in multiwell plates containing cell culture media. After 24 hours, the specimens were submitted to routine preparation for scanning electron microscopy. Three independent and blind examiners used photomicrographs to evaluate the morphology of the fibroblasts: 0 = without cells; 1 = flat cells; 2 = round cells; and 3 = combination of round and flat cells. Results: Statistical analysis indicated that there were significant differences among treatment groups and that group 3 was significantly different from groups 1 and 2. Conclusion: There was no difference between groups 1 and 2 in the morphology of fibroblasts. Laser instrumentation with concomitant irrigation impaired the adhesion of fibroblasts to dentinal surfaces.

Cryopreservation of Agaricus blazei in liquid nitrogen using dmso as cryoprotectant

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the Effects of Endodontic Materials on Fibroblast Viability and Cytokine Production

Introduction: Recently, a new sealer composed of Portland cement named Endo-CPM-Sealer was developed. The aim of this study was to investigate the effects of Endo-CPM-Sealer (EGEO SRL, Buenos Aires, Argentina), Sealapex (Sybron Endo, Glendora, CA), and Angelus MTA (Angelus, Londrina, Brazil) on cell viability and cytokine (interleukin [IL]-1 beta and IL-6) production by mouse fibroblasts. Methods: Millipore culture plate inserts with polyethylene tubes filled with materials were placed into 24-well cell culture plates with mouse fibroblasts. Cells cultured with only empty polyethylene tubes were used as the control. After 24 hours, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay was used to evaluate the cell viability. For cytokine assay, mouse fibroblasts were incubated in 24-well flat-bottom plates with set material disks at the bottom. Cells cultured without the material disks served as the negative control. After 24 hours of incubation, culture media were collected for cytokine evaluation by using an enzyme-linked immunosorbent assay. The data were statistically analyzed by analysis of variance and Bonferroni correction. Results: Endo-CPM-Sealer, Sealapex, and Angelus MTA did not inhibit the cell viability. All materials induced IL-6 releasing, but the amount was not statistically significant compared with the control group. Angelus MTA induced IL-1 beta releasing significantly more than the control. Conclusions: All materials were not considered cytotoxic in fibroblast culture. (J Endod 2009;35:1577-1579)

The effect of gene tubC on the vegetative growth of benomyl-resistant strains of Aspergillus nidulans

Two benomyl-resistant mutants, benD3 tubC41 and benD4 tubC42, of Aspergillus nidulans were isolated after UV treatment. The tubC mutations permitted good conidiation of these strains in culture media containing benomyl and were responsible for increasing their benomyl resistance levels. This implies that β3-tubulin, a product of the tubC gene, in addition to being involved in fungal conidiation, participates in the vegetative growth of the fungus. The tubC gene was located in linkage group I.

Hyaluronidase and chondroitin sulphatase production by different species of Candida

The production of hyaluronidase and chondroitin sulphatase by Candida albicans, Candida tropicalis, Candida parapsilosis, Candida guilliermondii and Candida krusei was investigated using a complex culture medium (Sabouraud glucose agar) and a chemically defined medium. Among the 63 C. albicans isolates tested, 61 (97.8%) were found to be hyaluronidase and chondroitin sulphatase producers; one isolate produced only chondroitin sulphatase and one other was unable to produce either enzyme. The second major hyaluronidase and chondroitin sulphatase producing species was C. tropicalis followed by C. guilliermondii, C. parapsilosis and C. krusei. Among the C. albicans isolates tested no relation between the source of isolation and the amount of hyaluronidase and chondroitin sulphatase produced was found.

The effect of serum on in vitro maturation, in vitro fertilization and steroidogenesis of bovine oocytes co-cultured with granulosa cells.

The influence of fetal calf serum alone (FCS) or associated with proestrous (FCS+PCS), estrous (FCS+ECS) or metaestrous (FCS+MCS) cow serum added to the culture medium and of the steroids produced by co-cultured granulosa cells were evaluated in terms of the in vitro maturation (IVM) and fertilization (IVF) of bovine oocytes. Supplementation of the medium with FCS+ECS and FCS+MCS resulted in higher proportions of oocytes that reached metaphase II (96.0% and 93.3%, respectively) and in higher proportions of embryos that reached the four- and eight-cell/morula stages (51.9% and 65.6%, respectively), whereas the supplementation with FCS and FCS+PCS resulted in only 79.2% and 67.5%, respectively, of matured oocytes and 26.7% and 34.3%, respectively, of cleaved embryos. These findings show that the best IVM and IVF were obtained at lower concentrations of estradiol produced by co-cultured granulosa cells (supplementation with FCS+ECS: 10.3 ng/ml and FCS+MCS: 2.1 ng/ml), whereas the worst results in IVM and IVF occurred at higher concentrations of estradiol that were obtained with FCS (33.1 ng/ml) and FCS+PCS (19.9 ng/ml) supplementation. These data suggest an inhibitory effect of estradiol on resumption of oocyte meiosis in vitro.

Paracoccidioides brasiliensis antigen batches from the same isolate show immunological and biochemical differences

We investigated the occurrence of antigenic and biochemical variability among Paracoccidioides brasiliensis antigen batches prepared according to the same protocol. Initially (experiment 1), we analyzed two antigen lots of two human isolates (Bt1 and Bt2), cultured in two media (PYG: bactopeptone, yeast extract, glucose; MMM: McVeigh and Morton medium) in SDS-PAGE and in two immunological tests (immunodiffusion-ID and footpad swelling test-FPT). Afterwards (experiment 2), we compared the antigenic profile of three antigen hatches from three human isolates (Bt1, Bt2 and Bt3) by two-dimensional immunoelectrophoresis (2 D-IEP) against a reference system for P. brasiliensis antigens. In experiment 1, there were important intra- and inter-strain antigenic differences between batches of the fungal isolates cultured on both media. The block titration of the antigen batches for the immunological tests revealed correlation between protein concentration and biological activity in ID and no correlation in FPT. In experiment 2, the reference system for P brasiliensis showed 26 antigen peaks. There were important differences between batches prepared from the same isolate and between batches from different isolates. Our data suggested the occurrence of instability in the synthesis of antigenic components by a same P. brasiliensis isolate, under controlled incubation conditions.

Survey of the Microbiological Quality of Nonalcoholic Carbonated Beverages

The number and the main groups of microorganisms present in samples of different nonalcoholic carbonated beverages (lemon, orange and guaraná soft drinks) obtained from a small factory were analyzed. The samples were obtained at the end of the processing line. They were then divided into two lots: one was sent to immediate analysis, the other was stored at environmental temperature for 90 d thereafter it was submitted to the same analysis. Aliquots of 1 mL were drawn from the various samples and the corresponding decimal dilutions were prepared. They were then grown in culture media and counts of mesophilic aerobic bacteria, molds and yeasts, acid-producing bacteria, total and fecal coliforms were taken. It was observed that, of all the analyzed samples, at time 0 or after storage sample C (orange) was the best, since it conformed to the microbiological standards established by legislation. The guaraná type could also be consumed on day zero; the lemon type was inadequate for consumption of all the analyzed samples, the orange type was the only one that could be consumed within 3 months of storage.

Bacillus thuringiensis development from 1971 to 1996: Cases of a research group in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A bacteriological study of hospital beds before and after disinfection with phenolic disinfectant

In hospitals, one of the ways to control microbial contamination is by disinfecting the furniture used by patients. This study's main objective was to evaluate the microbiological condition of hospital mattresses before and after such disinfection, in order to identify bacteria that are epidemiologically important in nosocomial infection, such as Staphylococcus aureus and Pseudomonas aeruginosa. RODAC plates with two different culture media were used to collect specimens. Patient beds were selected according to previously established criteria, and surface areas on the mattresses were chosen at random. From the total of 1 040 plate cultures from 52 mattresses, positive results were obtained from 500 of them (48.1%), 263 before disinfection and 237 after disinfection. Considering the selectivity of the culture media, the positivity rate was high. There were high prevalences of S. aureus both before and after mattress disinfection. The study results suggest that the usual disinfection procedures, instead of diminishing the number of microbes, merely displace them from one part of the mattress to another, and the number of microorganisms remains the same.

Copper complexation by Cyanophyta and Chlorophyta exudates

Several freshwater phytoplanktonic species (eukaryotic and prokaryotic) were grown in batch cultures up to stationary phase and quantified by chlorophyll a analysis. The complexation properties (conditional stability constant and total ligand concentration) of their exudates were investigated by complexometric titrations of the culture media using either copper or lead ion-selective electrodes. For most algae, Scatchard plot analysis of the titration data revealed two classes of copper-complexing ligands, one weaker and the other stronger. Strong copper-complexing agents were produced by Cyanophyta mainly in stationary growth phase. During exponential phase, ligand concentrations and the affinity for copper were similar for both Chlorophyta and Cyanophyta. Complexation parameters for Chlorophyta exudates were similar for both growth phases: exponential and stationary. In contrast, ligand concentrations were similar for Cyanophyta, but the conditional stability constants (the strength of association between ligand and metal) were different. Weak lead-complexing ligands were produced exclusively by two Chlorophyta.

Production, characterization and properties of polysaccharide depolymerizing enzymes from a strain of Curvularia inaequalis

Xylanase, β-glucosidase, β-xylosidase, endoglucanase and polygalacturonase production from Curvularia inaequalis was carried out by means of solid-state and submerged fermentation using different carbon sources. β-Glucosidase, β-xylosidase, polygalacturonase and xylanase produced by the microorganisms were characterized. β-Glucosidase presented optimum activity at pH 5.5 whereas xylanase, polygalacturonase and β-xylosidase activities were optimal at pH 5.0. Maximal activity of β-glucosidase was determined at 60°C, β-xylosidase at 70°C, and polygalacturonase and xylanase at 55°C. These enzymes were stable at acidic to neutral pH and at 40-45°C. The crude enzyme solution was studied for the hydrolysis of agricultural residues.

Control of amylase production and growth characteristics of Aspergillus ochraceus

The growth and the extracellular amylase production by Aspergillus ochraceus were studied in a stationary culture medium. Maximum growth rate of this fungus was found after 5 days of incubation at 30° C, but maximum amylase production was obtained after 2 days. The highest amylase production were attained with lactose, maltose, xylose and starch as carbon sources. The extracellular amylase production and mycelial growth were influenced by the concentration of starch. Other carbohydrates supported growth but did not induce amylase synthesis and glucose repressed it, indicating catabolite repression in this microorganism. The presence of both mechanisms of induction and repression suggests that at least these multiple forms of regulation are present in A. ochraceus. Of the nitrogen sources tested, casaminoacids, ammonium nitrate and sodium nitrate stimulated the highest yield of amylase. Optimal amylase production was obtained at pH 5.0, but enzyme activity was found only in the 4.0-6.0 pH range. These results were probably due to the inhibitory effect of NH 4 +-N in the culture medium.

Root instrumentation with an erbium:yttrium-aluminum-garnet laser: Effect on the morphology of fibroblasts

Objective: The purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet laser instrumentation of root surfaces on the morphology of fibroblasts from continuous lineage. Method and materials: Dentinal slices with 4 mm2 of surface area were obtained from teeth extracted for severe periodontal involvement. Specimens were assigned to one of three treatment groups: group 1, application of the laser with an energy level of 250 mJ at 103 pulses per second; group 2, application of the laser with an energy level of 80 mJ at 166 pulses per second; and group 3, similar to group 2, but with concomitant water irrigation of the device. The specimens were incubated in multiwell plates containing cell culture media. After 24 hours, the specimens were submitted to routine preparation for scanning electron microscopy. Three independent and blind examiners used photomicrographs to evaluate the morphology of the fibroblasts: 0 = without cells; 1 = flat cells; 2 = round cells; and 3 = combination of round and flat cells. Results: Statistical analysis indicated that there were significant differences among treatment groups and that group 3 was significantly different from groups 1 and 2. Conclusion: There was no difference between groups 1 and 2 in the morphology of fibroblasts. Laser instrumentation with concomitant irrigation impaired the adhesion of fibroblasts to dentinal surfaces.

Occurrence of killer yeasts in leaf-cutting ant nests

Killer activity was screened in 99 yeast strains isolated from the nests of the leaf-cutting ant Atta sexdens against 6 standard sensitive strains, as well as against each other. Among this yeast community killer activity was widespread since 77 strains (78 %) were able to kill or inhibit the growth of at least one standard strain or nest strain. Toxin production was observed in representatives of all the studied genera including Aureobasidium, Rhodotorula, Tremella and Trichosporon, whose killer activity has not yet been described.