Obtenção e caracterização físico-química de blendas poliméricas, baseadas em POE e PMMA, dopadas com dióxido de titânio

The study of polymer blends has been an alternative method in the search field of new materials for obtaining materials with improved properties. In this work blends of poly(methyl methacrylate) (PMMA) and poly(ethylene oxide) (PEO) doped with titanium dioxide (TiO2) were studied. The PEO is a polymer semicrystalline structure varying between, 70 and 84% crystallinity, while the PMMA exhibits behavior amorphous in their structure. The use of TiO2 is related to corrosion-resistant of titanium as well as good heat transfer and other characteristics. The study of these polymer blends doped TiO2 gives the properties junction organic (polymer) and inorganic (oxide) which leads to modification of the properties of the resultant material. The blends were doped TiO2 (POE/PMMA/TiO2) in different proportions of the PMMA with the PEO and TiO2 fixed. The ratios were: 90/10/0,1; 85/15/0, 1; 80/20/0,1, 75/25/0,1 and 70/30/0,1. The resulting material was obtained in powder form and being characterized by Fourier Transformed Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and Electrochemical Impedance Spectroscopy (EIS). The infrared spectra (IR) for the blends in different ratios showed a band at 1744 cm-1, characteristic of the C=O stretching, which increases in intensity with increasing PMMA composition, while in the spectrum of pure PEO this band is absent. This may suggest that the interaction is occurring between the polymers. In the micrographs of the blends also observed change in their surfaces with variation of the composition of PMMA, contributing to the change of the electrical properties of the material. The EIS data showed that the material exhibited conductivity of the order of 10-6 S.cm-1. The blend in the ratio B2(85/15/0, 1) showed better conductivity, σ = 1.56 x 10-6 S.cm-1. It was observed that the diffusion coefficient for the blends, B5(70/30/0, 1) was the largest, 1.07 x 10-6 m2.s-1. The XRD data showing that, with the variation in the composition of the PMMA blend crystallinity of the material is decreased reaching a minimum B3(80/20/0,1), and then increases again. Thermal analysis suggests that blends made from the material obtained can be applied at room temperature

Estudo do desempenho de resinas poliméricas para remoção de H2S do gás natural

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Estudo do desempenho de resinas poliméricas para remoção de H2S do gás natural

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Entendendo as propriedades do arenito Botucatu e sua utilização como meio poroso para estudos envolvendo o deslocamento de fluidos poliméricos

The development of products whose purpose is to promote blockages in high permeability zones as well as to control the hydrate or scale formation also needs some tests in porous media before using the product in the field, where attempts and unavoidable operational errors costs would able to derail any projects. The aim of this study was to analyze and compare the Botucatu and Berea sandstones properties, involving problems related to loss permeability. It was observed that even cores of Berea, without expansible clays in their composition had their permeability reduced, as soon as the salinity of brine reached a lower limit. As expected, the same happened with the Botucatu sandstone samples, however, in this case, the sensitivity to low salinity was more pronounced. In a second phase, the research was focused on the Botucatu Sandstone behavior front of dilute polymer solutions injection, checking the main relationships between the Rock / Fluid interactions, considering the Mobility Reduction, Resistance and Residual Resistance Factors, as well as adsorption/desorption processes of these polymers, and the polymer molecules average size and porous sandstone average size ratio. The results for both phases showed a real feasibility of using the Botucatu sandstone in laboratory tests whose objective is the displacement of fluids through porous media

Cinética de dissolução da superfície de aço SAE-AISI 1005 em meio ácido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A tradução química de experimentos alquímicos envolvendo água régia em Robert Boyle

Recentemente, alguns acadêmicos têm demonstrado que a tradução química pode auxiliar o trabalho histórico. O objetivo deste trabalho é traduzir alguns experimentos alquímicos de Robert Boyle para a química contemporânea, particularmente, aqueles que envolvem a água régia. A maior parte desses experimentos tem relação com o mecanicismo boyleano, com receitas de produção de compostos e com a padronização de procedimentos químicos. Muitos deles envolvem descrições precisas de propriedades, tais como o ponto de fusão, a mudança de gosto, a liberação de som e bolhas, a corrosão etc., que podem ser usadas como ferramentas de rastreamento para uma tradução à notação química atual.

Avaliação da resistência ao desgaste de aços inoxidáveis endurecíveis por precipitação nitretados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Irrigação do testículo em eqüino da raça Puro-Sangue Inglês

Estudamos o comportamento da artéria testicular e seus ramos, bem como o número e distribuição dos vasos penetrantes, em 30 pares de testículos de eqüinos da raça Puro-Sangue Inglês, adultos, mediante análise de esquemas de modelos obtidos pela corrosão após injeção de acetato de vinil. Verificamos que a artéria testicular apresenta 5 diferentes tipos de arranjos vasculares, isto é: a artéria testicular emite número variável de ramos, de 2 a 10 ramos mediais e de 3 a 11 ramos laterais (35 vezes - 58,4%); ou cede de 3 a 8 ramos adicionais e ao nível da metade de seu percurso, na borda livre do órgão, divide-se em um ramo medial e outro lateral (12 vezes - 20,0%); ou divide a irrigação do órgão com ramos denominados de complementares, 1 ramo (6 vezes - 10,0%) e 3 ramos (1 vez - 1,6%); ou ainda fornece os ramos medial e lateral, com predominância do lateral (3 vezes - 5,0%) ou do medial (3 vezes - 5,0%). Quanto à distribuição dos vasos penetrantes nos diferentes quadrantes, observamos que em mediana, por ordem, os testículos direitos apresentam o maior número de vasos penetrantes no quadrante craniomedial (13,0), seguido pelos quadrantes craniolateral (10,5), caudolateral (7,0) e caudomedial (6,5). Nos testículos esquerdos, também o quadrante craniomedial mostra o maior número de vasos penetrantes (12,5), seguido pelos quadrantes craniolateral (10,0), e com equivalência os quadrantes caudomedial e caudolateral (7,0). Anastomoses (8 vezes - 13,3%) foram localizadas todas na face ventral do órgão. Comparando o número de vasos penetrantes dos testículos direitos e esquerdos, verificamos que não existem diferenças estatisticamente significativas nos eqüinos da raça Puro-Sangue Inglês.

Anatomia topográfica e comportamento arterial do pâncreas em cágados Trachemys scripta elegans (wied, 1838)

The turtle Trachemys scripta elegans popularly known as American tiger water are native regions winged Florida and Mississippi, in the United States. We used twenty (20) turtles (Trachemys scripta elegans), adult males and females, which were euthanized under Resolution 714 of June 20, 2002 the Federal Council of Veterinary Medicine (CFMV). After euthanasia were identified aortas right and left to the injection of Neoprene latex 450, stained with specific pigment. To obtain the vinyl mold aorta was injected through the right and left vinyl acetate, followed by corrosion in sulfuric acid. It was observed that the pancreas is closely related to the liver, gizzard, gall bladder, and duodenum. His face cranial this distal region of the pylorus, while its caudal along the cranial region of the duodenum. Anatomically, the pancreas is an elongated body structure featuring a lightly lobed. As to the pancreas arterial vasculature is flushed in its transverse plane of two arteries arising from the celiac artery, and each antimere two pancreaticoduodenal artery in the cranial region, close to the pylorus by the pancreaticoduodenal artery flow in the caudal portion along the duodenum.

Medição de malha de terra em subestações energizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das propriedades de barreira de filmes depositados a plasma sobre a liga de alumínio 2024

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do oxigênio nas propriedades anelásticas da liga Ti-10Mo para aplicação biomédica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da dopagem com oxigênio nas propriedades anelásticas e biocompatibilidade de ligas Ti-5%pNb e Ti-10%pNb

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alteração das propriedades superficiais do alumínio via eletrólise e plasma

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Uma contribuição para o estudo do efeito causado pela névoa salina em isoladores cerâmicos de chaves fusíveis

Pós-graduação em Ciência e Tecnologia de Materiais - FC