Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

Análise do efeito de inseticidas neonicotinóides sobre a orientação e coleta de alimento de operárias de Apis mellifera L., 1758 (Hymenoptera: Apidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Métodos de coleta de deposição para ensaios de deriva em aplicações aéreas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A pesquisa em psicologia: ensaio sobre a Psicologia enquanto ciência, a pesquisa qualitativa e o uso da entrevista como principal instrumento de coleta de dados

For constituting itself a science, Psychology has coursed along way. From the time he was considered a Philosophy’s discipline until to be recognized as a legitimate science, Psychology had to devoteto the definition of its object of study, the development and refinement of theoretical-methodological frameworks and, in particular, to consolidation process of their research strategies and knowledge construction. Therefore, in order to regard the demands of the classical scientific paradigm, which is very influenced by Positivism, Psychology made use, initially, of quantitative methodology and laboratory research. This article presents some of the process of identity construction of Psychology as a science, focusing on its transition path between the quantitativist paradigm of scientific knowledge production to the qualitativist paradigm, until that is more commonly practiced nowadays: the collaborative use of these methodological strategies. For presenting the qualitative researching Psychology, we discussed, beyond its proposal and differentiation elements in relation to quantitative research, the different methods used for this mode and, in particular, the interview - which is considered the main way of data collection in surveys conducted by psychologists and, therefore, it is an important element the process of knowledge building that science, in addition to being the most qualified space for dialogue between there searcher and the research subject.

Coleta de informações para projeto de incinerador regional de resíduos sólidos urbanos (RSU)

The incineration of municipal solid waste has become a very interesting, in order that incineration reduces the amount of solid waste, which would be accumulated in dumps and / or landfill. Furthermore, it is possible to generate electrical energy by use of clean well known technology. To verify the feasibility of installing a plant for the incineration of solid waste with energy recovery, we must consider some basic requirements. For this reason, will be presented in this paper some factors that influence the project to install a plant of incineration with energy recovery.

Estudo hidrodinâmico quali-quantitativo de uma unidade de flotação por ar dissolvido (FAD): o efeito do dispositivo de coleta de água flotada

The main article aim was to investigate the collecting system of a dissolved air flotation (DAF) unit in pilot scale. Referring to the collecting system position, two options were analyzed: (i) top manifold and (ii) bottom manifold, pipes or plates. Qualitative and quantitative essays were performed, as image and stimulusresponse tests, respectively. The results of the essays standardized were adjusted by N-continuous stirred tank reactors in series and theoretical models of dispersion (low and high). The bottom manifold (plates with orifices) was more appropriate. The results pointed out that the N-continuous stirred tank reactors in series model was more adequate to describe the hydrodynamic behavior of the DAF unit.

A influência da escola de tempo integral sobre a qualidade de vida infantil

This study aims to evaluate the quality of life of students aged 7 to 12 years in two municipal schools in the municipality of Minas Gerais. One offers full-time care to their students with extracurricular activities and other school offers only the normal. We used the questionnaire AUQEI, Autoquestionnaire Qualité de Vie Enfant Image. The questionnaire was administered to 232 children. Through this study, we observed that the proportion of children with a good Quality of Life was higher in school full time (81%), compared to the normal school hours (58%). Therefore, it is concluded that the school offers an extended workday, is set in an area rich able to develop the maximum potential of children and their personal skills, which will reflect positively on their quality of life.

Implantação da vigilância do câncer relacionado ao trabalho em Londrina-PR entre 2011 e 2014

Pós-graduação em Saúde Coletiva - FMB

Purificação parcial e caracterização bioquímica de uma isoforma de β-glicosidase do fungo termofílico Myceliophthora thermophila M.7.7

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retorno à atividade reprodutiva de touro angus após fimose traumática com obliteração parcial da luz prepucial: relato de caso

The main disturbs affecting the genital segment of bulls are balanitis, phimosis and preputial injuries, abscesses or prolapses, resulting in decreased libido or mating ability. One case of traumatic phimosis with partial obliteration of preputial lumen is reported in Aberdeen Angus bull. During anamnesis, it was reported that the animal was unable to expose the penis and presented increased penile and preputial volume of unknown etiology after being submitted to a libido test. During clinical examination, a firm preputial mass of 15 cm in diameter was observed in the middle third of the prepuce and stenosis of preputial lumen was detected approximately 17 cm from the preputial orifice. Reconstructive surgery was the chosen therapy, with amputation of the affected foreskin portion. A skin segment of about 12 cm and affected mucosal portion were removed. Postoperative therapy consisted of dressing with chlorhexidine digluconate based ointment, povidone iodine and topical insect repellent (cypermethrin and carbamyl), systemic antibiotic therapy with benzathine penicillin (30,000 IU / kg, repeated after 48 hours) and anti-inflammatory therapy with flunixin meglumine (2 , 0 mg / kg SID) for three days. After twenty days, semen was collected by massage of the accessory glands. The ejaculate volume was 3 mL, with 200x106 spermatozoa / mL, white color, "suis generis" odor, 88% of motile sperm, 64% of progressively motile sperm and 82% of rapid sperm. Thus, the chosen surgical treatment was effective to correct the pathology and reintroduce the animal into reproductive activity

Sistema informatizado para dispositivos móveis de coleta dos dados referentes à cesta básica do município de Botucatu/SP

The collection of prices for basic goods supply is very important for the population, based on the collection and processing of these data the CLI (Cost Living Index) is calculated among others, helping consumers to shop more rationally and with a clearer view of each product impact of each product on their household budget, not only food, but also cleaning products and personal hygiene ones. Nowadays, the project of collection of prices for basic goods supply is conducted weekly in Botucatu - SP through a spreadsheet. The aim of this work was to develop a software which utilized mobile devices in the data collection and storage phase, concerning the basic goods supply in Botucatu -SP. This was created in order to eliminate the need of taking notes in paper spreadsheets, increasing efficiency and accelerating the data processing. This work utilized the world of mobile technology and development tools, through the platform".NET" - Compact Framework and programming language Visual Basic".NET" was used in the handheld phase, enabling to develop a system using techniques of object oriented programming, with higher speed and reliability in the codes writing. A HP Pavilion dv3 personal computer and an Eten glofish x500+ handheld computer were used. At the end of the software development, collection, data storing and processing in a report, the phase of in loco paper spreadsheets were eliminated and it was possible to verify that the whole process was faster, more consistent, safer, more efficient and the data were more available.

Fisiologia e bioquímica do tomateiro submetido à irrigação salina parcial do sistema radicular

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Invisibilidade social e saúde do trabalhador: dinâmica territorial do trabalho na coleta de lixo domiciliar urbano em Presidente Prudente/SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos da estabulação sobre o trato respiratório de equinos em dois tipos diferentes de camas e a pasto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produtividade e perfil químico de óleo essencial de acessos de Varronia curassavica Jacq. em diferentes horários de coleta e período sazonal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)