1000 resultados para caracterização física


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Physical activity is one of the main components of a healthy lifestyle, responsible for many health benefits. Despite being considered important for both disease prevention and health promotion there is high prevalence of sedentary behavior in the elderly population. Questionnaires are practical and feasible instruments for assessing levels of physical activity. However, they may have limitations in older age ranges. Accelerometers, movement sensors that make physical activity data more objective, emerge as reliable measuring devices. Aim: Determine the validity of the International Physical Activity Questionnaire (IPAQ) adapted for elderly with accelerometry in elderly women. Methods: 57 elderly women, with mean age of 66.05 ± 5.98 years who took part in hypertension control and physical activity incentive programs were assessed in relation to objective and subjective measures of physical activity. The accelerometer was used for 07 consecutive days, 24 hours per day before the IPAQ was applied. Data were analyzed using measures of central tendency and dispersion to characterize the sample according to variables collected. To check the validity of the data we used the Spearman correlation test, considering a significance level of p <0.05. Results: With respect to the categories of physical activity obtained by IPAQ, 46.4% developed moderate physical activity, followed by a high (30.3%) and low level (23.2%). There was a negative correlation only between self-reported time spent sitting and time spent on light activities as measured by accelerometry (r = - 0.408; p = 0.003) and mean activity level (counts/min) with physical activity levels evaluated by IPAQ (r = 0.297; p = 0.036). Conclusion: The IPAQ used in elderly women shows moderate to low validity levels according to accelerometry measures. Assessment of sedentary activities exhibited acceptable levels compared to accelerometry; however, moderate (r = 0.096; p > 0.05) to vigorous (r = 0.098; p > 0.05) activities were not correlated, demonstrating the inability of IPAQ to evaluate this type of activity in elderly women

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Two methodologies were proposed to obtain micro and macroporous chitosan membranes, using two different porogenic agents. The methodologies proved to be effective in control the porosity as well as the pore size. Thus, microporous membranes were obtained through the physical blend of chitosan and polyethylene oxide (PEO) on an 80:20 (m/m) ratio, respectively, followed by the partial PEO solubilization in water at 80 ◦C. Macroporous chitosan membranes with asymmetric morphology were obtained using SiO2 as the porogenic agent. In this case, chiotsan-silica ratios used were 1:1, 1:3 and 1:5 (m/m). Membranes characterization were carried out by SEM (scanning electronic microscopy), X-ray diffraction, Fourier Transform Infrared Spectroscopy (FTIR), Thermal analysis (TG, DTG , DSC and DMTA). Permeability studies were performed using two model drugs: sodium sulfamerazine and sulfametoxipyridazine. By transmission FTIR it was possible to confirm the complete removal of SiO2. The SEM images confirmed the porous formation for both micro and macroporous membranes and also determined their respective sizes. By thermal analysis it was possible to show differences related with water sorption capacity as well as thermal stability for both membranes. DTG and DSC allowed evidencing the PEO presence on microporous membranes. The absorbance x time curves obtained on permeability tests for micro and macroporous membranes showed a linear behavior for both drugs in all range of concentration used. It was also observed, through P versus C curves, an increase in permeability of macroporous membranes according to the increase in porosity and also a decrease on P with increase in drug concentration. The influences of the drug molecular structure, as well as test temperatures were also evaluated

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Two pillaring methods were tested to synthesize pillared clays containing mixed Al/Co pillars. Using the first method, based on the traditional procedure, were obtained materials containing different Co concentrations: 10, 25, 50, 75 and 100 % of Co in the pillaring solution. Just the experiments with low concentrations (10 and 25 % of Co) has formed pillared clays, whereas the sample with 25 % of cobalt showed best results compared with the one obtained just using Al as pillaring agent (basal spacing higher than 18 Å and surface area bigger than 300 m²/g). The 27Al NMR results pointed out the formation of mixed Al/Co pillars due to decreased between the intensities of AlVI/AlIV signals, indicating that the AlIV content decreased while Co content increased, suggesting the isomorphic substitution of Al atoms for Co in the Keggin ion structure (pillaring agent). For the samples containing 75 and 100 % of cobalt, it was verified the formation of others materials, which could be identified as hydrotalcite like compounds. The second pillarization method was named mixed layers, because the objective was to intercalate clay layers with hydrotalcite layers. Thus, after calcination, the hydrotalcite layers would dehydroxylate, resulting just in the metals oxides, intercalated between the clay sheets, thus generating, a pillared clay. For this purpose, were tested 4 synthesis procedures: physical mixture, mixture in water, ionic exchange under reflux and in situ synthesis. Of these, the method which showed the best results was the in situ synthesis, in which basal spacings of 14 Å (after calcination) were obtained, indicating that the samples are intercalated with metal oxides (Mg and Al). This procedure was reproduced with a Co-Al LDH (layered double hydroxide) and similar results were obtained, testifying the method reproducibility

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Neste trabalho estudamos o comportamento das estrelas pertencentes a sistemas planetários no que diz respeito às suas características infravermelho e à distribuição espectral de energia (SED). Nosso estudo tem como base uma análise detalhada do comportamento da emissão no infravermelho de 48 estrelas com planetas, classificadas como estrelas da seqüência principal, subgigantes ou gigantes. Foram analisados dados de fotometria infravermelho nas bandas 12, 25 e 60µm do catálogo de fontes IRAS puntiformes (IPSC) e nas bandas JHK do projeto 2 Micron All Sky Survey (2MASS). A partir do cálculo da discrepância na posição de apontamento da fonte e do cálculo do índice de cor, selecionamos e localizamos os objetos no diagrama de cor-cor do IRAS. Este diagrama permite-nos identificar possíveis objetos detentores de disco de poeira. Fizemos também uma análise da distribuição espectral de energia onde observamos também traços de excesso de fluxo no infravermelho, com isso, confirmarmos a presença do disco de poeira nos objetos identificados no diagrama de cor. Apesar da atual amostra de estrelas com planetas incluir apenas um subconjunto de estrelas com planetas detectadas na vizinhança solar, a presente análise do fluxo infravermelho nesses objetos oferecem uma possibilidade única de estudar as características infravermelho das estrelas pertencentes aos sistemas planetários extra-solar. Neste contexto, nosso estudo aponta resultados interessantes, entre outros destacamos o fato de algumas estrelas com planetas apresentarem um peculiar fluxo IRAS [60-25], indicando a co-existência de poeira juntamente com os planetas destes sistemas extra solar

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The calcium ferrite (Ca2Fe2O5) has a perovskite-type structure with oxygen deficiency and is used as a chemical catalyst. With the advent of nanoscience and nanotechnology, methods of preparation, physical and chemical characterizations, and the technological applications of nanoparticles have attracted great scientific interest. Calcium nanostructured ferrites were produced via high-energy milling, with subsequent heat treatment. The milling products were characterized by X-ray diffraction, magnetization and Mössbauer spectroscopy. Samples of the type Ca2Fe2O5 were obtained from the CaCO3 and Fe2O3 powder precursors, which were mixed stoichiometrically and milled for 10h and thermally treated at 700ºC, 900ºC and 1100ºC. The Mössbauer spectra of the treated samples were adjusted three subespectros: calcium ferrite (octahedral and tetrahedral sites) and a paramagnetic component, related to very small particles of calcium ferrite, which are in a superparamagnetic state. For samples beats in an atmosphere of methyl alcohol, there is a significant increase in area associated with the paramagnetic component. Hysteresis curves obtained are characteristic of a weak ferromagnetic-like material

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Ballroom dance and Forro are part of Brazilian culture, and Xote and Baiao are part of Forro. The aim of this study was to diagramate the dances Xote and Baiao they are danced inside São Paulo State and to describe rhythmly these movements. It was observed and filmed several college couples dancing Xote and Baiao for analysis and description of the movements of the dances, by a discursive way and by diagrams. It was identified two basic structures ("Lateral Basic Step" and "Forward and Back Basic Step"), and variation steps "Open" and "Change of places with Turn", very used by couples.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Avaliaram-se as qualidades física e química dos frutos de seis cultivares de carambola (Averrhoa carambola L.), propagadas pela Estação Experimental de Citricultura de Bebedouro, São Paulo, objetivando a obtenção de informações sobre a qualidade dos frutos produzidos nesta região. Foram utilizados frutos das cultivares Tean-ma, Fwang Tung, Arkin, Malásia, Golden Star e Nota-10. Os frutos foram analisados quanto à massa fresca, comprimento, largura, volume, porcentagem de suco, polpa e semente, número de sementes, coloração (L, Cromaticidade e ângulo Hue). Na polpa, determinou-se o pH, assim como o teor de umidade, sólidos solúveis totais (SST), acidez total titulável (ATT), vitamina C, açúcares solúveis totais e redutores, cinzas, proteína, pectina total e solúvel, e minerais (Ca, P, K, Mg, S, Cu, Fe, Mn e Zn). Os resultados foram avaliados estatisticamente através de um delineamento inteiramente casualizado e revelaram que os melhores frutos são os originários das cultivares Arkin, Tean-ma e Nota-10, pois são os maiores, os mais pesados e apresentam os maiores teores de sólidos solúveis totais (SST) e açúcares solúveis (AST), assim como boa relação SST/ATT. Os frutos da 'Arkin' mostraram coloração mais amarela, enquanto os da 'Golden Star' foram considerados de coloração mais clara, ou com maior translucidez. A textura foi menor nos frutos da 'Arkin', e se relacionou com a maior solubilização de suas pectinas

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A criação intensiva de frango gera uma grande quantidade de resíduos ricos em nutrientes cujo uso agrícola pode ser viabilizado pelos produtores, na adubação das culturas comerciais. Objetivou-se avaliar a influência da fertilização com cama de frango na recuperação física de um Latossolo. O experimento foi instalado em um Latossolo Vermelho Distrófico típico, textura média, sob pastagem degradada de Brachiaria decumbens Stapf. Os tratamentos estudados foram: 0, 1.200, 2.400, 4.800 kg ha-1 de cama-frango e 2.400 kg ha-1 de cama-frango + adubação mineral com 36 kg ha-1 N, 60 kg ha-1 K2O e 60 kg ha-1 de P2O5. As aplicações foram realizadas em janeiro de 2004 e o solo amostrado em duas épocas distintas (60 e 210 dias após aplicação), nas profundidades de 0-20 e 20-40 cm, para a caracterização dos atributos físicos: argila dispersa em água, grau de floculação, densidade do solo e porosidade total. O teor de argila dispersa em água decresceu com o aumento das doses de cama aplicadas e, conseqüentemente, houve um incremento no grau de floculação; houve uma pequena redução na densidade do solo e na porosidade total. Os atributos físicos do solo avaliados responderam com maior intensidade às aplicações de cama de frango nas doses variando de 2.666 a 3.750 kg ha-1.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The use of laboratory animals in conjunction with research on the human organism provides a basis for on understanding of several important physiological and pathological processes. Besides, the results of experimental studies enable technical and safety improvements to be made in surgical techniques used in the medical clinic. As living biological material is involved, we should guarantee its physical well-being, taking into account microbiological contamination and the genetics, nutrition and correct manipulation of the animals, in order to avoid incorrect conclusions from the experiments or unnecessarily large numbers of animals being used. In parallel with the concerns and legislation on the use of laboratory animals, there is also a growing preoccupation with the welfare and safety of those who handle the laboratory animals, since they run the risk of acquiring occupational diseases through contact with zoonotic pathogens or developing allergies. Prevention requires the application of modern technological advances in the design of the animal house and in the work routines. Unfortunately, few establishments in Brazil possess staff with adequate training and a basic infrastructure of research that includes the laboratory animal breeding centers, equivalent to those existing ones in the United States and Europe.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)