Facilitatory effects of an auditory warning stimulus in a visual location identification task and a visual shape identification task

The occurrence of a weak auditory warning stimulus increases the speed of the response to a subsequent visual target stimulus that must be identified. This facilitatory effect has been attributed to the temporal expectancy automatically induced by the warning stimulus. It has not been determined whether this results from a modulation of the stimulus identification process, the response selection process or both. The present study examined these possibilities. A group of 12 young adults performed a reaction time location identification task and another group of 12 young adults performed a reaction time shape identification task. A visual target stimulus was presented 1850 to 2350 ms plus a fixed interval (50, 100, 200, 400, 800, or 1600 ms, depending on the block) after the appearance of a fixation point, on its left or right side, above or below a virtual horizontal line passing through it. In half of the trials, a weak auditory warning stimulus (S1) appeared 50, 100, 200, 400, 800, or 1600 ms (according to the block) before the target stimulus (S2). Twelve trials were run for each condition. The S1 produced a facilitatory effect for the 200, 400, 800, and 1600 ms stimulus onset asynchronies (SOA) in the case of the side stimulus-response (S-R) corresponding condition, and for the 100 and 400 ms SOA in the case of the side S-R non-corresponding condition. Since these two conditions differ mainly by their response selection requirements, it is reasonable to conclude that automatic temporal expectancy influences the response selection process.

Interaction between affordance and handedness recognition: a chronometric study

The visualization of tools and manipulable objects activates motor-related areas in the cortex, facilitating possible actions toward them. This pattern of activity may underlie the phenomenon of object affordance. Some cortical motor neurons are also covertly activated during the recognition of body parts such as hands. One hypothesis is that different subpopulations of motor neurons in the frontal cortex are activated in each motor program; for example, canonical neurons in the premotor cortex are responsible for the affordance of visual objects, while mirror neurons support motor imagery triggered during handedness recognition. However, the question remains whether these subpopulations work independently. This hypothesis can be tested with a manual reaction time (MRT) task with a priming paradigm to evaluate whether the view of a manipulable object interferes with the motor imagery of the subject's hand. The MRT provides a measure of the course of information processing in the brain and allows indirect evaluation of cognitive processes. Our results suggest that canonical and mirror neurons work together to create a motor plan involving hand movements to facilitate successful object manipulation.

Antioxidant capacity of anthocyanins from acerola genotypes

Anthocyanins from 12 acerola genotypes cultivated at the Active Germplasm Bank at Federal Rural University of Pernambuco were isolated for antioxidant potential evaluation. The antioxidant activity and radical scavenging capacity of the anthocyanin isolates were measured according to the β-carotene bleaching method and 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging assay, respectively. The antioxidant activity varied from 25.58 to 47.04% at 0.2 mg.mL-1, and it was measured using the β-carotene bleaching method. The free radical scavenging capacity increased according to the increase in concentration and reaction time by the DPPH assay. At 16.7 μg.mL-1 concentration and after 5 minutes and 2 hours reaction time, the percentage of scavenged radicals varied from 36.97 to 63.92% and 73.27 to 94.54%, respectively. Therefore, the antioxidant capacity of acerola anthocyanins varied amongst acerola genotypes and methods used. The anthocyanins present in this fruit may supply substantial dietary source of antioxidant which may promote health and produce disease prevention effects.

Functionalisation of spruce O-acetyl-galactoglucomannans for barrier and composite applications

The increasing use of energy, food, and materials by the growing population in the world is leading to the situation where alternative solutions from renewable carbon resources are sought after. The growing use of plastics depends on the raw-oil production while oil refining are politically governed and required for the polymer manufacturing is not sustainable in terms of carbon footprint. The amount of packaging is also increasing. Packaging is not only utilising cardboard and paper, but also plastics. The synthetic petroleum-derived plastics and inner-coatings in food packaging can be substituted with polymeric material from the renewable resources. The trees in Finnish forests constitute a huge resource, which ought to be utilised more effectively than it is today. One underutilised component of the forests is the wood-derived hemicelluloses, although Spruce Oacetyl-galactoglucomannans (GGMs) have previously shown high potential for material applications and can be recovered in large scale. Hemicelluloses are hydrophilic in their native state, which restrains the use of them for food packaging as non-dry item. To cope with this challenge, we intended to make GGMs more hydrophobic or amphiphilic by chemical grafting and consequently with the focus of using them for barrier applications. Methods of esterification with anhydrides and cationic etherification with a trimethyl ammonium moiety were established. A method of controlled synthesis to obtain the desired properties by the means of altering temperature, reaction time, the quantity of the reagent, and even the solvent for purification of the products was developed. Numerous analytical tools, such as NMR, FTIR, SEC-MALLS/RI, MALDI-TOF-MS, RP-HPLC and polyelectrolyte titration were used to evaluate the products from different perspectives and to acquire parallel proofs of their chemical structure. Modified GGMs with different degree of substitution and the correlating level of hydrophobicity was applied as coatings on cartonboard and on nanofibrillated cellulose-GGM films to exhibit barrier functionality. The water dispersibility in processing was maintained with GGM esters with low DS. The use of chemically functionalised GGM was evaluated for the use as barriers against water, oxygen and grease for the food packaging purposes. The results show undoubtedly that GGM derivatives exhibit high potential to function as a barrier material in food packaging.

Antioxidant activity of black bean (Phaseolus vulgaris L.) protein hydrolysates

Abstract The objective of this work was to study the effect of enzymatic hydrolysis of black bean protein concentrate using different enzymes. Bean proteins were extracted and hydrolyzed over a period of 120 min using the enzymes pepsin or alcalase. The protein hydrolysates’ molecular weight was assayed by electrophoresis and the antioxidant activity was evaluated by the capturing methods of free radicals ABTS●+ and DPPH. Electrophoretic results showed that the bands above 50 kDa disappeared, when the beans protein was subjected to hydrolysis with pepsin. The bean protein hydrolysate obtained by hydrolysis with alcalase enzyme, showed higher antioxidant activity for inhibition of the radical ABTS●+. However, the hydrolysates obtained by hydrolysis with pepsin had higher antioxidant activity for inhibition of the radical DPPH. The use of pepsin and alcalase enzymes, under the same reaction time, produced black bean protein hydrolysates with different molecular weight profiles and superior antioxidant activity than the native bean protein.

Virtuaalinen käyttöönottoympäristö automaatiojärjestelmälle

Valmistavan teollisuuden kiristyvät vaatimukset suunnittelusta markkinoille -ajassa (engl. time-to-market), laadussa, kustannustehokkuudessa ja turvallisuudessa luovat paineita uusien toimintatapojen etsimisessä. Usein laitteiston ohjausalgoritmeja ei ole mahdollista testata todellisen laitteiston kanssa, vaan ainoaksi ennakoivaksi vaihtoehdoksi jää todellisen laitteiston virtuaalinen mallintaminen. Eräs uusista toimintavoista on virtuaalinen käyttöönotto, jossa tuotantolinja tai laitteisto mallinnetaan ja sen käyttäytymistä simuloidaan ohjausalgoritmien parantamista ja todentamista varten. Tämän diplomityön tavoitteena oli toteuttaa virtuaalinen käyttöönottoympäristö, jolla laitteiston 3D-mallinnettua virtuaalista mallia voidaan ohjata reaaliajassa todellisen laitteiston ohjauslaitteistolla. Käyttöönottoympäristön toteuttamisen lopullisena tavoitteena on tutkia, millaisia hyötyjä sillä voidaan saavuttaa Outotec (Finland) Oy:n automaatiojärjestelmien suunnittelussa ja käyttöönotossa kiristyvien vaatimusten täyttämiseksi. Työssä toteutetulla käyttöönottoympäristöllä pystytään simuloimaan 3D-mallinnetun laitteiston osan toimintaa reaaliajassa. Todellisen laitteiston ominaisuuksista määritettyjä vaatimuksia ei kustannussyistä täytetty, sillä ennen sitä haluttiin varmistua valitun alustan ominaisuuksista, toimivuudesta ja soveltuvuudesta. Toteutuksen katsotaan kuitenkin täyttävän pehmeän reaaliaikaisuuden kriteerin noin 40 ms aikatasolla ja 80 ms reaktioajalla. Toteutettu virtuaalinen käyttöönottoympäristö osoittautui toimivaksi ja soveltuvaksi, sekä sen todettiin tuovan potentiaalisia hyötyjä Outotec (Finland) Oy:lle, esimerkiksi kosketusnäyttöjen visualisoinnin parannus, hybridikäyttöönottomahdollisuus sekä automaatio-ohjauksien kehittäminen. Työn perusteella arvioidaan onko Outotec:lla tarvetta jatkaa valitulla alustalla todellisen laitteiston aikavaatimukset täyttävään reaaliaika-toteutukseen, jota työssä esitellään.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Tikkureduktio klooridioksidivalkaisussa

Tämän tutkimuksen tavoitteena oli selvittää miten laite- ja prosessitekniikka, ennen kaikkea sekoitus, vaikuttaa tikkujen liukenemiseen eli tikkureduktioon. Tutkimustyön lähtökohdaksi otettiin se, että sekoituksella on vaikutus tikkupitoisuuteen. Sekoituksen lisäksi selvitettiin muiden valkaisuparametrien (reaktiolämpötila, viive ja valkaisukemikaaliannos) merkitys valkaisujen aikana. Valkaisumenetelminä käytettiin pussivalkaisua ja valkaisua Mark IV-reaktorissa. Näiden suurin ero on sekoitus, joka on Mark IV-reaktorissa hyvin tehokas verrattuna pussivalkaisuihin. Valkaisumenetelmien ja prosessiratkaisujen kehittyessä valkaisukemikaalien kulutusta on vähennetty viime vuosien aikana merkittävästi. Tämän seurauksena valkaisukemikaalikustannukset sekä ympäristökuorma ovat pienentyneet. Kun valkaisukemikaalien käyttöä on vähennetty, tikkujen liukeneminen valkaisuvaiheen aikana on hidastunut. Valmis sellu ei saa sisältää tikkuja, joten niiden määrä on pidettävä hyväksyttävänä. Samanaikaisesti on paine optimoida kemikaalien käyttöä. Tämän kandidaatintyön perusteella voidaan todeta sekoituksella olevan vaikutusta tikkujen liukenemiseen valkaisuvaiheessa, sillä tikkureduktio oli selkeästi parempi Mark IV-reaktorissa tehtyjen valkaisujen jälkeen. Parhaiten tikkuja liukeni valkaisusekvenssissä, kun ensimmäisen klooridioksidivaiheen kemikaaliannos oli korkeampi ja toisen klooridioksidivaiheen matalampi. Käytettyjen prosessimuuttujien tarkemman merkityksen selvittäminen vaatii kuitenkin vielä lisätutkimusta.

A dose-response investigation of the attentional blink during sleep restriction /

Recent dose-response sleep restriction studies, in which nightly sleep is curtailed to varying degrees (e.g., 3-, 5-, 7-hours), have found cumulative, dose-dependent changes in sleepiness, mood, and reaction time. However, brain activity has typically not been measured, and attentionbased tests employed tend to be simple (e.g., reaction time). One task addressing the behavioural and electrophysiological aspects of a specific attention mechanism is the Attentional Blink (AB), which shows that the report accuracy of a second target (T2) is impaired when it is presented soon after a first target (Tl). The aim of the present study was to examine behavioural and electrophysioiogical responses to the AB task to elucidate how sleep restriction impacts attentional capacity. Thirty-six young-adults spent four consecutive days and nights in a sleep laboratory where sleep, food, and activity were controlled. Nightly sleep began with a baseline sleep (8 hours), followed by two nights of sleep restriction (3,5 or 8 hours of sleep), and a recovery sleep (8 hours). An AB task was administered each day at 11 am. Results from a basic battery oftests (e.g., sleepiness, mood, reaction time) confirmed the effectiveness of the sleep restriction manipulation. In terms of the AB, baseline performance was typical (Le., T2 accuracy impaired when presented soon after Tl); however, no changes in any AB behavioural measures were observed following sleep restriction for the 3- or 5-hour groups. The only statistically significant electrophysiological result was a decrease in P300 amplitude (for Tl) from baseline to the second sleep restriction night for the 3-hour group. Therefore, following a brief, two night sleep restriction paradigm, brain functioning was impaired for the TI of the AB in the absence of behavioural deficit. Study limitations and future directions are discussed.

Studies of nucleophilic attack on tris (pentafluorophenyl) phosphine and its oxides

The reaction of tris(pentafluorophenyl)phosphine [5] with the nucleophiles dimethyl formamide (DMF), hexamethylphosphoric triamide (HMPA), diethyl formamide (DEF), hexaethylphosphoric triamide (HEPA), hydrazine, N,N-dimethyl hydrazine (in presence and/or absence of KF), phenylhydrazine, ammonium hydroxide, formamide, aniline, sodium hydrogen sulfide, and hexaethylphosphorous triamide was investigated. The reaction of [5] with DMF and HMPA gave the same product, namely tris-[4-(N,N-dimethylamino)-2,3,5,6-tetrafluorophenyl]phosphine [12] but in higher yield in the case of HMPA. Compound (5] also reacted with DEF to give tris[4-(N,N-diethylamino)-2,3,5,6-tetrafluorophenyl] phosphine [14]. When [51 was treated with HEPA, it gave a mixture of bis(pentafluorophe~yl)-(N,N-diethylamino-tetrafluorophenyl)phosphine, pentafluorophenyl-bis-(N,N-diethylamino-tetrafluorophenyl)phosphine and tris (N,N-diethylamino-tetrafluorophenyl)phosphine. Treatment of [5] with aqueeus hydrazine solution in excess ethanol gave tris(4-hydrazo-2,3,4,6-tetrafluorophenyl)phosphine [1s1 in high yield while reaction with aqueous hydrazine led to C-P cleavage and production of tetrafluorophenyl hydrazine. With N,N-dimethyl hydrazine, [5] gave tris(4-N,N-dimethylhydrazine-2,3,5,6-tetrafluorophenyl) phosphine {20j. The latter could be obtained in higher yield and shorter reaction time, by the addition of KF. The reaction of compound {51 with phenylhydrazine in THF gave bis(pentafluorophe~yl)-4-S-phenylhydrazino- 2,3,5,6-tetrafluorophenyl phosphine [22] in low yield. Reaction of [5] with ammonium hydroxide in THF at high pressure in the presence of KF gave tris-~4-amino-2,3,5,6-tetrafluorophenyl)phosphine [25]. Similarly, formamide led to a mixture of (C6F4NHZ)3P, (C6F4NHZ)ZPC6FS, (C6F4NHZ)ZPC6F4NHCHO, and C6F4NHZP(C6Fs)(C6F4NHCHO). When [5] was treated with aniline, a mixture of mono-, di-, and tri-substituted products was obtained. Sodium hydrogen sulfide in ethylene glycol/ pyridine led to C-P cleavage and the isolation of pentafluorobenzene and tetrafluorothiophenol. Reaction of [5] and its oxide [35] with different alkoxides in the corresponding alcohols led mainly to C-P bond cleavage products, with the exception of one case where sodium methoxide was used in ether, and which led to tris-(4-methoxy-2,3,9,6-tetrafluorophenyl)phosphine [37]. On the basis of various spectroscopic data, it was concluded that the para position in compound [5] was generally the favoured site of attack.

Studies on the insecticide - nematicide-oxamyl and its quantitative determination by gas chromatographic method

Ox amyl , an insecticide/nematicide with the chemical name; methyl ~'. ~·-dimethyl-~-(methylcarbamoyl)oxy-l-thiooxamimidate, and its major degradation compound; oxime or oximino compound, methyl ~',~'-dimethyl-~-hydroxy-l-thiooxamimidate were studied in this work. NMR and mass spectrometry were utilized in the structural studies. An attempt was made to explain the fragmentation patterns of some major peaks in the mass spectra of oxamyl and oxime. A new gas chromatographic method for the detection and determination of submicrogram levels of intact oxamyl using a electron-capture detector was developed. The principle of this method is to produce a derivative which is highly sensitive to an electron-capture detector. The derivative described is dinitrophenyl methylamine( DNPMA ) • Experimental conditions such as pH , reaction temperature , reaction time, the amount of reagent ( Dinitrofluaro benzene) etc. were thoroughly investigated and optimized. This method was successfully applied to the determination of oxamyl residues in tobacco leaves and soil. Throughout this J9D:oject , thin layer chromatography was also used in the separation:and clean up of oxamyl and oxime samples.

The role of daytime napping in sleepiness and cognitive function in 24-70 year olds /

Daytime napping improves well-being and performance for young adults. The benefits of napping in older adults should be investigated because they have fragmented nocturnal sleep, cognitive declines, and more opportunity to nap. In addition, experience with napping might influence the benefits of napping. Study 1 examined the role of experience with napping in young adults. Habitual (n = 23) and non-habitual nappers (n = 16) were randomly assigned to a 20-minute nap or a 20- minute reading condition. Both groups slept the same according to macro architecture. However, microarchitecture showed greater theta, alpha, and beta power during Stage 1, and greater delta, alpha, and sigma power during Stage 2 for habitual nappers, for the most part indicating better sleep. Both groups felt less sleepy after the nap. P2 latency, reflecting information processing, decreased after the nap for habitual nappers, and after the control condition for non-habitual nappers. In sum, both groups who slept felt better, but only the habitual nappers who napped gained a benefit in terms of information processing. Based on this outcome, experience with napping was investigated in Study 2. Study 2 examined the extent to which daytime napping enhanced cognition in older adults, especially frontal lobe function. Cognitive deficits in older adults may be due to sleep loss and age-related decline in brain functioning. Longer naps were expected to provide greater improvement, particularly for older adults, by reducing sleep pressure. Thirty-two adults, aged 24-70 years, participated in a repeated measures dose-response manipulation of sleep pressure. Twenty- and sixty-minute naps were compared to a no-nap condition in three age groups. Mood, subjective sleepiness, reaction time, working memory, 11 novelty detection, and waking electro physiological measures were taken before and after each condition. EEG was also recorded during each nap or rest condition. Napping reduced subjective sleepiness, improved working memory (serial addition / subtraction task), and improved attention (reduced P2 amplitude). Physiological sleepiness (i.e., waking theta power) increased following the control condition, and decreased after the longer nap. Increased beta power after the short nap, and seen with older adults overall, may have reflected increased mental effort. Older adults had longer latencies and smaller amplitudes for several event-related potential components, and higher beta and gamma power. Following the longer nap, gamma power decreased for older adults, but increased for young adults. Beta and gamma power may represent enhanced alertness or mental effort. In addition, Nl amplitude showed that benefits depend on the preceding nap length as well as age. Since the middle group had smaller Nl amplitudes following the short nap and rest condition, it is possible that they needed a longer nap to maintain alertness. Older adults did not show improvements to Nl amplitude following any condition; they may have needed a nap longer than 60 minutes to gain benefits to attention or early information processing. Sleep characteristics were not related to benefits of napping. Experience with napping was also investigated. Subjective data confirmed habitual nappers were happier to nap, while non-habitual nappers were happier to stay awake, reflecting self-identified napping habits. Non-habitual nappers were sleepier after a nap, and had faster brain activity (i.e., heightened vigilance) at sleep onset. These reasons may explain why non-habitual nappers choose not to nap.

Développement d’un système d’administration de l’anesthésie en boucle fermée

En salle d’opération, les tâches de l’anesthésiste sont nombreuses. Alors que l’utilisation de nouveaux outils technologiques l’informe plus fidèlement sur ce qui se passe pour son patient, ces outils font que ses tâches deviennent plus exigeantes. En vue de diminuer cette charge de travail, nous avons considérer l’administration automatique d’agents anesthésiques en se servant de contrôle en boucle fermée. À cette fin, nous avons développé un système d’administration d’un agent anesthésique (le propofol) visant à maintenir à un niveau optimal la perte de conscience du patient pendant toute la durée d’une chirurgie. Le système comprend un ordinateur, un moniteur d’anesthésie et une pompe de perfusion. L’ordinateur est doté d’un algorithme de contrôle qui, à partir d’un indice (Bispectral IndexTM ou BIS) fournit par le moniteur d’anesthésie détermine le taux d’infusion de l’agent anesthésiant. Au départ, l’anesthésiste choisit une valeur cible pour la variable de contrôle BIS et l’algorithme, basé sur système expert, calcule les doses de perfusion de propofol de sorte que la valeur mesurée de BIS se rapproche le plus possible de la valeur cible établie. Comme interface-utilisateur pour un nouveau moniteur d’anesthésie, quatre sortes d’affichage ont été considérés: purement numérique, purement graphique, un mélange entre graphique et numérique et un affichage graphique intégré (soit bidimensionnel). À partir de 20 scenarios différents où des paramètres normaux et anormaux en anesthésie étaient présentés à des anesthésistes et des résidents, l’étude des temps de réaction, de l’exactitude des réponses et de la convivialité (évaluée par le NASA-TLX) a montré qu’un affichage qui combine des éléments graphiques et numériques était le meilleur choix comme interface du système. Une étude clinique a été réalisée pour comparer le comportement du système d’administration de propofol en boucle fermée comparativement à une anesthésie contrôlée de façon manuelle et conventionnelle où le BIS était aussi utilisé. Suite à l’approbation du comité d’éthique et le consentement de personnes ayant à subir des chirurgies générales et orthopédiques, 40 patients ont été distribués également et aléatoirement soit dans le Groupe contrôle, soit dans le Groupe boucle fermée. Après l’induction manuelle de propofol (1.5 mg/kg), le contrôle en boucle fermée a été déclenché pour maintenir l’anesthésie à une cible de BIS fixée à 45. Dans l’autre groupe, le propofol a été administré à l’aide d’une pompe de perfusion et l’anesthésiste avait aussi à garder manuellement l’indice BIS le plus proche possible de 45. En fonction du BIS mesuré, la performance du contrôle exercé a été définie comme excellente pendant les moments où la valeur du BIS mesurée se situait à ±10% de la valeur cible, bonne si comprise de ±10% à ±20%, faible si comprise de ±20% à ±30% ou inadéquate lorsque >±30%. Dans le Groupe boucle fermée, le système a montré un contrôle excellent durant 55% du temps total de l’intervention, un bon contrôle durant 29% du temps et faible que pendant 9% du temps. Le temps depuis l’arrêt de la perfusion jusqu’à l’extubation est de 9 ± 3.7 min. Dans le Groupe contrôle, un contrôle excellent, bon, et faible a été enregistré durant 33%, 33% et 15% du temps respectivement et les doses ont été changées manuellement par l’anesthésiste en moyenne 9.5±4 fois par h. L’extubation a été accomplie après 11.9 ± 3.3 min de l’arrêt de la perfusion. Dans le Groupe boucle fermée, un contrôle excellent a été obtenu plus longtemps au cours des interventions (P<0.0001) et un contrôle inadéquat moins longtemps (P=0.001) que dans le Groupe contrôle. Le système en boucle fermée d’administration de propofol permet donc de maintenir plus facilement l’anesthésie au voisinage d’une cible choisie que l’administration manuelle.

Modulation différentielle par la privation de sommeil des processus attentionnels frontaux et pariétaux: une étude de potentiels évoqués cognitifs

L’objectif de la présente étude visait à évaluer les effets différentiels de la privation de sommeil (PS) sur le fonctionnement cognitif sous-tendu par les substrats cérébraux distincts, impliqués dans le réseau fronto-pariétal attentionnel, lors de l’administration d’une tâche simple et de courte durée. Les potentiels évoqués cognitifs, avec sites d’enregistrement multiples, ont été prévilégiés afin d’apprécier les effets de la PS sur l’activité cognitive rapide et ses corrélats topographiques. Le matin suivant une PS totale d’une durée de 24 heures et suivant une nuit de sommeil normale, vingt participants ont exécuté une tâche oddball visuelle à 3 stimuli. L’amplitude et la latence ont été analysées pour la P200 et la N200 à titre d’indices frontaux, tandis que la P300 a été analysée, à titre de composante à contribution à la fois frontale et pariétale. Suite à la PS, une augmentation non spécifique de l’amplitude de la P200 frontale à l’hémisphère gauche, ainsi qu’une perte de latéralisation spécifique à la présentation des stimuli cibles, ont été observées. À l’opposé, l’amplitude de la P300 était réduite de façon prédominante dans la région pariétale pour les stimuli cibles. Enfin, un délai de latence non spécifique pour la N200 et la P300, ainsi qu’une atteinte de la performance (temps de réaction ralentis et nombre d’erreurs plus élevé) ont également été objectivées. Les résultats confirment qu’une PS de durée modérée entraîne une altération des processus attentionnels pouvant être objectivée à la fois par les mesures comportementales et électrophysiologiques. Ces modifications sont présentes à toutes les étapes de traitement, tel que démontré par les effets touchant la P200, la N200 et la P300. Qui plus est, la PS affecte différemment les composantes à prédominance frontale et pariétale.

Effet de l'histoire lumineuse sur la sensibilité rétinienne et circadienne à la lumière

L’objectif de ce projet de recherche était de vérifier la présence de changements de sensibilité de la rétine et du système circadien suite à deux semaines d'exposition à un milieu faiblement ou fortement éclairé, dans des conditions contrôlées en laboratoire. De plus, comme un changement de sensibilité peut modifier l'ajustement du système circadien au cycle jour-nuit extérieur, nous voulions également vérifier si la phase circadienne serait modifiée par le traitement et si la vigilance et l’humeur seraient affectées. Dix sujets ont été exposés à de la lumière tamisée (70 lux [LT]) et 10 ont été exposés à de la lumière vive (3000 lux [LV]) pendant 12 jours consécutifs en laboratoire de 8h45 à 19h00 tous les jours. L’exposition à la lumière a été mesurée 5 jours avant l’entrée au laboratoire dans l’habitat naturel du sujet et pendant la période en laboratoire à l’aide de l’Actiwatch-L®. La sensibilité rétinienne a été mesurée avant et après le traitement lumineux, par un électrorétinogramme (ERG) et la sensibilité circadienne, par le test de suppression de mélatonine salivaire. Tout au long du protocole, la vigilance, la somnolence et l'humeur ont été évaluées à plusieurs moments de la journée à intervalles prédéterminés. Après 12 jours d’exposition en lumière contrôlée, l’amplitude de l’onde-a au Vmax à l’ERG photopique a diminué en LV alors qu’elle a augmenté en LT. À l’ERG scotopique, une différence de sensibilité rétinienne (log K) entre les groupes avant le traitement expérimental s’est amenuisée à la fin du traitement (p=.053). La suppression de mélatonine après 90 minutes d’exposition au test de suppression a diminué en LV alors qu’il n’y a pas eu de modification en LT, cependant cette interaction n’était pas significative (p=.16). La phase circadienne des sujets exposés à LV a été devancée de 58 minutes (p=.04) alors qu’elle a été retardée de 26 minutes en LT (p=.32). Les mesures de vigilance subjective (EVA) ont indiqué que les sujets LV se considéraient plus éveillés que les sujets LT après le traitement (p=.02). Par contre, aucune différence n’est apparue quant aux mesures de performance psychomotrice ni de l’humeur. L’histoire lumineuse n’a pas modifié la sensibilité rétinienne dans le sens prévu par les hypothèses alors qu’il y a eu une tendance vers une augmentation de la sensibilité circadienne en condition de lumière tamisée. L’amélioration de la vigilance subjective après l’exposition en LV n’a pas été soutenue par les résultats de la performance psychomotrice. L’histoire lumineuse n’a eu aucun effet sur l’humeur des sujets. Cette étude souligne l’importance d’utiliser des mesures permettant de départager les effets immédiats d’un traitement lumineux des effets à long terme autant sur le plan rétinien que circadien. Il reste également complexe d’étudier en laboratoire des changements adaptatifs qui se produisent dans le milieu naturel en raison du confinement et des modifications physiologiques et psychologiques pouvant y être associées.