Work in inflammatory and degenerative joint diseases

This article focuses on work disability and sick leave and their cost; it also discusses the value of vocational rehabilitation programmes in rheumatic conditions such as rheumatoid arthritis, ankylosing spondylitis, hip and knee osteoarthritis. It acknowledges the importance of work not only for the worker who has one of these diseases but also for the public purse. Much can be done to improve the health of the persons and reduce their disability and its impact in the workplace which will have an important effect on their and their family's quality of life. It is important that neither rehabilitation nor vocational rehabilitation are regarded as bolt-on activities after drug treatment but are seen as an integral part of effective management. Publications dealing with return to work are relatively common in rheumatoid arthritis, less common in ankylosing spondylitis and relatively rare in osteoarthritis. Vocational rehabilitation programmes should aim to facilitate job retention or, failing that, to improve the ability to return to work. The process must be started with in the health arena and it has to be recognised that slow or poor practice in the health service can jeopardise the patient's work potential

Women working at university restaurants: life and work conditions and gender-based violence

This is an exploratory and descriptive study with a quantitative approach that aimed to understand the social production and reproduction processes of women working at university restaurants and the occurrence and the magnitude of gender-based violence committed against them by their intimate partners. The data were collected through semi-structured interviews. The analysis categories used were social production and reproduction, gender and gender-based violence. The interviewees held a subordinate social position during the productive and reproductive periods of their lives. Approximately 70% reported having experienced gender-based violence from an intimate partner (66% psychological violence, 36.3% physical violence and 28.6% sexual violence). Most of the health problems resulting from violence were related to mental health. The results indicate that the situation requires immediate interventions, mostly guided by the instrumentalization of these women and the support by the state and the university as appropriate to address violence.

Process and results of the development of an ICNP® Catalogue for Cancer Pain

This was a methodological study conducted to describe the process and results of the development of an International Classification for Nursing Practice (ICNP®) Catalogue for Cancer Pain. According to the International Council of Nurses (ICN), this catalogue contains a subset of nursing diagnoses, outcomes, and interventions to document the implementation of the nursing process in cancer patients. This catalogue was developed in several steps according to the guidelines recommended by the ICN. As a result, 68 statements on nursing diagnoses/outcomes were obtained, which were classified according to the theoretical model for nursing care related to cancer pain into physical (28), psychological (29), and sociocultural and spiritual (11) aspects. A total of 116 corresponding nursing interventions were obtained. The proposed ICNP® Catalogue for Cancer Pain aims to provide safe and systematic orientation to nurses who work in this field, thus improving the quality of patient care and facilitating the performance of the nursing process.

The implicit theory of historical change in the work of Alan S. Milward

Alan S. Milward was an economic historian who developed an implicit theory ofhistorical change. His interpretation which was neither liberal nor Marxist positedthat social, political, and economic change, for it to be sustainable, had to be agradual process rather than one resulting from a sudden, cataclysmicrevolutionary event occurring in one sector of the economy or society. Benignchange depended much less on natural resource endowment or technologicaldevelopments than on the ability of state institutions to respond to changingpolitical demands from within each society. State bureaucracies were fundamentalto formulating those political demands and advising politicians of ways to meetthem. Since each society was different there was no single model of developmentto be adopted or which could be imposed successfully by one nation-state onothers, either through force or through foreign aid programs. Nor coulddevelopment be promoted simply by copying the model of a more successfuleconomy. Each nation-state had to find its own response to the political demandsarising from within its society. Integration occurred when a number of nation states shared similar political objectives which they could not meet individuallybut could meet collectively. It was not simply the result of their increasinginterdependence. It was how and whether nation-states responded to thesedomestic demands which determined the nature of historical change.

The role of institutions in the contractual process

Human beings increase their productivity by specializingtheir resources and exchanging their products. Theorganization of exchange is costly, however, becausespecialized activities need coordination and incentiveshave to be aligned. This work first describes how theseexchanges are organized in an institutional environment.It then focuses on the dual effect of this environment-as with any other specialized resource, institutions maybe used for expropriation purposes. They enjoyspecialization advantages in safeguarding exchange butthey also make possible new forms of opportunism,causing new costs of exchange. Three perverse tendenciesare identified:In the legal field, there is a surplus ofmandatory rules and, at the same time, a deficit in default rules. Second, courts activity is biased againstthe quasi-judicial role of the parties and the market. Third, Market enforcement is based on reputationalassets that are badly exposed to opportunism.

Incremental Validity and Indirect effect of Ethical Development on Work Performance

We modeled work performance as outcomes of individual-differences mediated by technical performance. Beyond the "usual suspects" (e.g., general mental ability, and personality), we also measured the ethical development of participants (n = 460). We surmised that ethical development - which has not been extensively studied as a predictor of work performance while controlling for established predictors - captures unique variance in both technical and work performance. Results demonstrated incremental validity for ethical development in predicting technical performance, which in turn predicted work performance. The indirect effect of ethical development was significant too. Our results highlight the importance of process models of performance, which include proximal as well as distal individual differences.

Precarious Work: Agenda and Implications for Corporate Social Responsibility

Precarious work, in contrast to regular, permanent wage work, is commonly associated to insecure and unstable, and often poor quality jobs. The concept of precarious work relates either to a socioeconomic group which allows one to refer it to a "class in itself," or as - pursued more recently - to the precarization process which results in a growing fragmentation of societal structures. Common to both conceptions is that they refer to the exposition of workers to employment instability, limited access to legal and union protection, socially irresponsible and discriminating employment practices, and social and economic vulnerability in general. The present contribution provides an overview of some key issues and future directions of research on precarious work relevant to CSR researchers, policy-makers, and social scientists.

Editorial research and the publication process in biomedicine and health: Report from the Esteve Foundation Discussion Group, December 2012.

Despite the fact that there are more than twenty thousand biomedical journals in the world, research into the work of editors and publication process in biomedical and health care journals is rare. In December 2012, the Esteve Foundation, a non-profit scientific institution that fosters progress in pharmacotherapy by means of scientific communication and discussion organized a discussion group of 7 editors and/or experts in peer review biomedical publishing. They presented findings of past editorial research, discussed the lack of competitive funding schemes and specialized journals for dissemination of editorial research, and reported on the great diversity of misconduct and conflict of interest policies, as well as adherence to reporting guidelines. Furthermore, they reported on the reluctance of editors to investigate allegations of misconduct or increase the level of data sharing in health research. In the end, they concluded that if editors are to remain gatekeepers of scientific knowledge they should reaffirm their focus on the integrity of the scientific record and completeness of the data they publish. Additionally, more research should be undertaken to understand why many journals are not adhering to editorial standards, and what obstacles editors face when engaging in editorial research.

Do brief alcohol motivational interventions work like we think they do?

BACKGROUND: Questions remain about how brief motivational interventions (BMIs) for unhealthy alcohol use work, and addressing these questions may be important for improving their efficacy. Therefore, we assessed the effects of various characteristics of BMIs on drinking outcomes across 3 randomized controlled trials (RCTs). METHODS: Audio recordings of 314 BMIs were coded. We used the global rating scales of the Motivational Interviewing Skills Code (MISC) 2.1: counselor's acceptance, empathy, and motivational interviewing (MI) spirit, and patient's self-exploration were rated. MI proficiency was defined as counselor's rating scale scores ≥5. We also used the structure, confrontation, and advice subscale scores of the Therapy Process Rating Scale and the Working Alliance Inventory. We examined these process characteristics in interventions across 1 U.S. RCT of middle-aged medical inpatients with unhealthy alcohol use (n = 124) and 2 Swiss RCTs of young men with binge drinking in a nonclinical setting: Swiss-one (n = 62) and Swiss-two (n = 128). We assessed the associations between these characteristics and drinks/d reported by participants 3 to 6 months after study entry. RESULTS: In all 3 RCTs, mean MISC counselor's rating scales scores were consistent with MI proficiency. In overdispersed Poisson regression models, most BMI characteristics were not significantly associated with drinks/d in follow-up. In the U.S. RCT, confrontation and self-exploration were associated with more drinking. Giving advice was significantly associated with less drinking in the Swiss-one RCT. Contrary to expectations, MI spirit was not consistently associated with drinking across studies. CONCLUSIONS: Across different populations and settings, intervention characteristics viewed as central to efficacious BMIs were neither robust nor consistent predictors of drinking outcome. Although there may be alternative reasons why the level of MI processes was not predictive of outcomes in these studies (limited variability in scores), efforts to understand what makes BMIs efficacious may require attention to factors beyond intervention process characteristics typically examined.

The work of Spanish men. A quantitative analysis based on census data, 1900-1970

This paper presents a historical examination of employment in old age in Spain, in order to characterize this labour segment and identify and analyse its specific problems. One of these problems is the life-cycle deskilling process, already shown for certain national cases. This study explores whether this hypothesis also holds in Spain. The perspective used is essentially quantitative, as our analysis is based on the age-profession tables in Spanish population censuses from 1900 to 1970.

The use of the vac in complex wounds - does it work and how?

Background: Complex wounds pose a major challenge in reconstructive and trauma surgery. Several approaches to increase the healing process have been proposed in the last decades. In this study we study the mechanism of action of the Vacuum Assisted Closure device in diabetic wounds. Methods: Full-thickness wounds were excised in diabetic mice and treated with the VAC device or its isolated components: an occlusive dressing (OD) alone, subathmospheric pressure at 125 mm Hg (Suction), and a polyurethane foam without (Foam) and with (Foamc) downward compression of approximately 125 mm Hg. The last goups were treated with either the complete VAC device (VAC) or with a silicne interface that alows fluid removel (Mepithel-VAC). The effects of the treatment modes on the wound surface were quantified by a two-dimensional immunohistochemical staging system based on vasculature, as defined by blood vessel density (CD31) and cell proliferation (defined by ki67 positivity), 7 days post wounding. Finite element modelling was used to predict wound surface deformation under dressing modes and cross sections of in situ fixed tissues were used to measure actual microstrain. Results: The foam-wound interface of the Vacuum Assisted Closure device causes significant wound stains (60%) causing a deformation of the single cell level leading to a profound upregulation of cell proliferation (4-fold) and angiogenisis (2.2-fold) compared to OD treated wounds. Polyurethane foam exposure itself causes a frather unspecific angiogenic response (Foamc, 2 - fold, Foam, 2.2 - fold) without changes of the cell proliferation rate of the wound bed. Suction alone without a specific interface does not have an effect on meassured parameters, showing similar results to untreated wounds. A perforated silicone interface caused a significant lower microdeforamtion of the wound bed correlating to changes of the wound tissues. Conclusion: The Vacuum Assisted Closure device induce significanttissue growth in diabetic wounds. The wound foam interface under suction causes profound macrodeformation that stimulates tissue growth by angiogenesis and cell proliferation. It needs to be taken in consideration that in the clinical setting different wound types may profit from different elements of this suction device.

Development of a Model for the Ice Scraping Process, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. Behavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Science, practice and patient needs: the work of the Plinius Maior Society.

The Plinius Maior Society is a European multinational, multidisciplinary group of clinicians and researchers in the alcoholism field, which strives for a comprehensive care concept in the management of alcoholism and alcohol-related problems. The Society, using evidence-based medicine, has developed a set of protocols, in the forms of guidelines, flow-charts, leaflets and booklets, for use as tools in research on and treatment of alcohol dependence, with a view to standardize clinical research procedures and to bridge the gap between the alcoholism researcher, practitioner and patient. These protocols or tools have been subjected to a review process during their preparation, and further comments on their validity will be integrated in their updates. Seven protocols have so far been developed, two of which, 'Guidelines on Evaluation of Treatment of Alcohol Dependence' and 'Detection and Management of Patients with Psychiatric and Alcohol Use Disorders', are aimed at the clinical researcher and specialists, whereas three others [in the form of decision trees (flow-charts)] are aimed at the general practitioner and other primary health care providers. These are entitled 'Alcohol Risk Assessment and Intervention in Primary Care', 'Withdrawal from Alcohol at Home' and 'Brief Intervention in Patients with Alcohol-Related Problems'. The remaining two tools are booklets aimed at the patient, one to support initiatives for detection of drinking problems and primary intervention, namely 'Do you have this Problem? Discuss it with your Doctor!', and the other to assist the patient in relapse prevention after the early stages of treatment, namely 'On the Way to Recovery'. The protocols for the general practitioners and patients have so far been produced in seven European languages, and, as with the Guidelines, feedback from target users will be collected and incorporated in future updates. The Society continually seeks to consider areas of clinical importance for its work and, as it enters the new millennium, it hopes to address and make a significant contribution to the most pressing problem in the management of alcohol dependence, namely relapse.

Influence of hydrodynamic interactions on the adsoption process of large particles

We have studied the adsorption process of non-Brownian particles on a line. Our work differs from previously proposed models in that we have incorporated hydrodynamic interactions between the incoming particles and the preadsorbed particles as well as the surface. We then numerically analyze the effect of these interactions on quantities related to the adsorption process. Comparing our model to the ballistic deposition model (BM) shows a significant discrepancy in the pair correlation function. These results can explain some differences between recent experiments and BM predictions. Finally, the limitations of the applicability of BM are addressed.

Development of a Model for the Ice Scraping Process Iowa Department of Transportation Project HR 361 Final Report, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. S~milabr ehavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.