Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.

Real-time Musical Pair Improvisation on Mobile Devices

This thesis discusses the design and implementation of a real-time musical pair improvisation scenario for mobile devices. In the scenario transferring musical information over a network connection was required. The suitability of available wireless communication technologies was evaluated and communication was analyzed and designed on multiple layers of TCP/IP protocol stack. Also an application layer protocol was designed and implemented for the scenario. The implementation was integrated into a mobile musical software for children using available software components and libraries although the used platform lead to hardware and software constraints. Software limitations were taken into account in design. The results show that real-time musical improvisation can be implemented with wireless communication and mobile technology. The results also show that link layer had the most significant effect on real-time communication in the scenario.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.

Downstream processing of pectinase produced by Aspergillus niger in solid state cultivation and its application to fruit juices clarification

In this work, a protocol for the formulation of an enzyme concentrated product to be applied in fruit juice treatment is described. Downstream processing conditions for the recovery and concentration of pectinases produced by the new strain Aspergillus niger LB-02-SF in solid state cultivation were assessed. The solid-liquid ratio in the extraction step of pectinases recovery from the cultivated media was evaluated and the highest activity was obtained with a solid-liquid ratio of 1:10. The crude extract was concentrated by ultrafiltration and the total pectinase (TP) activity was 73.6-fold concentrated in relation to the crude extract, and a final TP titer of 663 U mL–1 was obtained with 73.7% of recovery yield. KCl and different glycerol concentrations were added to the concentrated extract and the stability of pectinases during the storage at 5°C for 59 weeks was tested. The formulation with 50% w/w glycerol was applied to the treatment of apple and grape juices and the results of these tests were statistically comparable to those obtained with two high-quality commercial preparations.

Validation of ice skating protocol to predict aerobic power in hockey players

Validation ofan Ice Skating Protocol to Predict Aerobic Power in Hockey Players In assessing the physiological capacity of ice hockey players, researchers have often reported the outcomes from different anaerobic skate tests, and the general physical fitness of participants. However, with respect to measuring the aerobic power of ice hockey players, few studies have reported a sport-specific protocol, and currently there is a lack of cohort-specific information describing aerobic power based on evaluations using an on-ice protocol. The Faught Aerobic Skating Test (FAST) uses an on-ice continuous skating protocol to induce a physical stress on a participant's aerobic energy system. The FAST incorporates the principle of increasing workloads at measured time intervals during a continuous skating exercise. Regression analysis was used to determine the estimate of aerobic power within gender and age level. Data were collected on 532 hockey players, (males=384, females=148) ranging in age between 9 and 25 years. Participants completed a laboratory test to measure aerobic power using a modified Bruce protocol, and the on-ice FAST. Regression equations were developed for six male and female, age-specific cohorts separately. The most consistent predictors were weight and final stage completed on the FAST. These results support the application of the FAST to estimate aerobic power among hockey players with R^ values ranging from 0.174 to 0.396 and SEE ranging from 5.65 to 8.58 ml kg' min'' depending on the cohort. Thus we conclude that FAST to be an accurate predictor of aerobic power in age and gender-specific hockey playing cohorts.

Méthodologie pour la synthèse combinatoire d’azapeptides: application à la synthèse d’analogues aza-GHRP-6 en tant que ligands du récepteur CD36

Les azapeptides sont des mimes peptidiques où le carbone alpha d’un ou de plusieurs acides aminés est remplacé par un atome d’azote. Cette modification tend à stabiliser une conformation en repliement beta en raison de la répulsion électronique entre les paires d’électrons libres des atomes d’azote adjacents et de la géométrie plane de l’urée. De plus, le résidu semicarbazide a une meilleure résistance face aux protéases en plus d’être chimiquement plus stable qu’une liaison amide. Bien que les propriétés des azapeptides en fassent des mimes peptidiques intéressants, leurs méthodes de synthèses font appel à la synthèse laborieuse d’hydrazines substituées en solution. Le peptide sécréteur d’hormone de croissance 6 (GHRP-6, His-D-Trp-Ala-Trp-D-Phe-Lys-NH2) est un hexapeptide synthétique qui possède une affinité pour deux récepteurs distincts: les récepteurs GHS-R1a et CD36. Les travaux effectués au cours de mon doctorat qui seront détaillés dans cet ouvrage visent à atteindre deux objectifs: (1) le développement d’analogues du peptide GHRP-6 sélectif à un seul récepteur et (2) la mise au point d’une nouvelle méthodologie pour la synthèse combinatoire d’azapeptides. En réponse au premier objectif, la synthèse parallèle de 49 analogues aza-GHRP-6 a été effectuée et certains candidats sélectifs au récepteur CD36 ont été identifiés. L’étude de leurs propriétés anti-angiogéniques, effectuée par nos collaborateurs, a également permis d’identifier des candidats intéressants pour le traitement potentiel de la dégénérescence maculaire liée à l’âge. Une nouvelle approche pour la synthèse combinatoire d’azapeptides, faisant appel à l’alkylation et la déprotection chimiosélective d’une sous-unité semicarbazone ancrée sur support solide, a ensuite été développée. La portée de cette méthodologie a été augmentée par la découverte de conditions permettant l’arylation régiosélective de cette sous-unité semicarbazone, donnant accès à treize nouveaux dérivés aza-GHRP-6 possédant des résidus aza-arylglycines aux positions D-Trp2 et Trp4. L’élaboration de conditions propices à l’alkylation et la déprotection chimiosélective de la semicarbazone a donné accès à une variété de chaînes latérales sur l’acide aminé « aza » préalablement inaccessibles. Nous avons, entre autres, démontré qu’une chaîne latérale propargyl pouvait être incorporée sur l’acide aminé « aza ». Tenant compte de la réactivité des alcynes, nous avons ensuite élaboré des conditions réactionnelles permettant la formation in situ d’azotures aromatiques, suivie d’une réaction de cycloaddition 1,3-dipolaire sur support solide, dans le but d’obtenir des mimes de tryptophane. Sept analogues du GHRP-6 ont été synthétisés et testés pour affinité au récepteur CD36 par nos collaborateurs. De plus, nous avons effectué une réaction de couplage en solution entre un dipeptide possédant un résidu aza-propargylglycine, du paraformaldehyde et une variété d’amines secondaires (couplage A3) afin d’accéder à des mimes rigides d’aza-lysine. Ces sous-unités ont ensuite été incorporées sur support solide afin de générer sept nouveaux azapeptides avec des dérivés aza-lysine à la position Trp4 du GHRP-6. Enfin, une réaction de cyclisation 5-exo-dig a été développée pour la synthèse de N-amino imidazolin-2-ones en tant que nouveaux mimes peptidiques. Leur fonctionnalisation par une série de groupements benzyliques à la position 4 de l’hétérocycle a été rendue possible grâce à un couplage Sonogashira précédant la réaction de cyclisation. Les propriétés conformationnelles de cette nouvelle famille de composés ont été étudiées par cristallographie aux rayons X et spectroscopie RMN d’un tétrapeptide modèle. L’activité biologique de deux mimes peptidiques, possédant un résidu N-amino-4-méthyl- et 4-benzyl-imidazolin-2-one à la position Trp4 du GHRP-6, a aussi été examinée. L’ensemble de ces travaux devrait contribuer à l’avancement des connaissances au niveau des facteurs structurels et conformationnels requis pour le développement d’azapeptides en tant que ligands du récepteur CD36. De plus, les résultats obtenus devraient encourager davantage l’utilisation d’azapeptides comme peptidomimétiques grâce à leur nouvelle facilité de synthèse et la diversité grandissante au niveau de la chaîne latérale des acides aminés « aza ».

Conception, synthèse et diversification de l'azaGly-Pro : un mime de tour beta, outil d'étude structure-activité : application au développement d'un nouvel agent tocolytique

Les accouchements prématurés constituent un problème médical majeur en constante augmentation et ce, malgré tous les efforts mis en œuvre afin de contrer le déclenchement des contractions avant terme. Cette thèse relate du ''design'' rationnel d'un nouvel agent thérapeutique (i.e., tocolytique) qui serait capable de 1) arrêter les contractions, et 2) prolonger la gestation. Pour ce faire, une nouvelle cible, la prostaglandine F2α et son récepteur ont été sélectionnés et le peptidomimétisme a été choisi afin de résoudre cette problématique. L'introduction contient un historique rapide de la conception à la synthèse (''drug design'') du peptide parent, le PDC113, premier peptide a avoir démontré des aptitudes tocolytiques suffisantes pour faire du peptidomimétisme. La deuxième partie de l'introduction présente les concepts du peptidomimétisme appliqués au PDC113 qui ont permis d'accéder au PDC113.824, inhibiteur allostérique du récepteur de la prostaglandine F2α, et explique comment ce mime nous a permis d'élucider les mécanismes de signalisation intracellulaire impliqués dans la contraction musculaire lisse. Cette thèse présente la conception, la synthèse et l'étude structure-activité de mimes de repliement de tour β au sein du mime peptidique original (PDC113.824) dans lequel nous avons remplacé l'azabicycloalkane central (l'indolizidin-2-one) par une série d'autres azabicycloalcanes connus et des acides aza-aminés dont nous avons élaboré la synthèse. Dans un premier temps, une nouvelle stratégie de synthèse en solution de l'aza-glycyl-proline à partir de la diphényle hydrazone et du chloroformate de p-nitrophényle a été réalisée. Cette stratégie a permis d'éliminer les réactions secondaires de cyclisation intramoléculaires communément obtenues lors de l'introduction d'acides aza-aminés avec les protections traditionnelles de type carbamate en présence de phosgène, mais aussi de faciliter l'accès en une étape à des dérivés peptidiques du type aza-glycyle. L'élongation de l'aza-glycyl-proline en solution nous a permis d'accéder à un nouveau mime tetrapeptidique du Smac, un activateur potentiel de l'apoptose au sein de cellules cancéreuses. Par la suite, nous avons développé une stratégie de diversification sélective de l'azote α du résidu azaglycine en utilisant différents types d'halogénures d'alkyle en présence de tert-butoxyde de potassium. Afin de valider le protocole d'alkylation de l'aza-dipeptide, différents halogénures d'alkyle ont été testés. Nous avons également démontré l'utilité des aza-dipeptides résultants en tant que ''building block'' afin d'accéder à une variété d'azapeptides. En effet, l'aza-dipeptide a été déprotégée sélectivement soit en N-terminal soit en C-terminal, respectivement. D'autre part, la libération de l'amine de l'ester méthylique de l'aza-alkylglycyl-proline a conduit à une catégorie de composés à potentiel thérapeutique, les azadicétopipérazines (aza-DKP) par cyclisation intramoléculaire. Enfin, notre intérêt quant au développement d'un nouvel agent tocolytique nous a amené à développer une nouvelle voie de synthèse en solution du PDC113.824 permettant ainsi d'élucider les voies de signalisation intracellulaires du récepteur de la prostaglandine F2α. Afin de valider l'importance de la stéréochimie et d'étudier la relation structure/ activité du mime, nous avons remplacé l'indolizidin-2-one (I2aa) centrale du PDC113.824 par une série d'autres azabicycloalcanes et azadipeptides. Les azabicycloalcanes D-I2aa, quinolizidinone, et indolizidin-9-one ont été synthétisés et incorporés au sein du dit peptide ne donnant aucune activité ni in vitro ni ex vivo, validant ainsi l'importance du tour β de type II' pour le maintien de l'activité biologique du PDC113.824. Finalement, l'insertion d'une série de dérivés aza(alkyl)glycyl-prolyles a mené à de nouveaux inhibiteurs allostériques du récepteur de la PGF2α, l'un contenant l'azaglycine et l'autre, l'azaphénylalanine. Cette thèse a ainsi contribué, grâce à la conception et l'application de nouvelles méthodes de synthèse d'aza-peptides, au développement de nouveaux composés à potentiel thérapeutique afin d'inhiber le travail prématuré.

Le Canada et l’article 1F de la Convention relative au statut des réfugiés : une application large en réponse aux menaces à la sécurité nationale

En 1951, le droit international des réfugiés voyait le jour avec la Convention relative au statut des réfugiés. Cette convention ainsi que son Protocole stipulent la définition contemporaine de cette notion et les obligations de l'État d'accueil à l’égard des réfugiés mais y prévoit aussi une exception. En effet, les rédacteurs de la Convention de 1951, percevant que certains bourreaux tenteraient d'user de ce mécanisme pour échapper à des poursuites en trouvant refuge à l'étranger, y ont intégré une dérogation à la définition de réfugié qui a pris la forme d’une clause d'exclusion. Celle-ci permet à tout État ayant adhéré à cet instrument de refuser d'accueillir sur son territoire les individus à l'origine des plus grands crimes internationaux et nationaux. Le Canada, en ratifiant la Convention de 1951 et son Protocole en 1969, a incorporé dans sa législation nationale cette clause d'exclusion dans l'article 98 de la Loi sur l'immigration et la protection des réfugiés. Le présent mémoire porte sur l'application de cette clause d'exclusion en droit canadien. Nous proposons une analyse de l'application de cette disposition en droit interne. L’objectif général est de montrer que les cours de justice favorisent une interprétation trop large de la clause d’exclusion, dénaturant ainsi son statut de règle d’exception. En effet, cette interprétation jurisprudentielle a pour conséquence d’attribuer un poids prépondérant à la sécurité nationale aux dépens du caractère humanitaire qui imprègne le droit d’asile depuis ses origines.

Hexagonal dielectric resonator antenna - A novel DR antenna for wireless communication

In this thesis, the author proposes a new geometry DR antenna-the Hexagonal Dielectric Resonator Antenna(HDRA)-capable of multiple frequency operation on a single feed of excitation.This avoids the conventional use of miniaturizes the structure.The properties of the HDRA on microstrip as well as coaxial feeding have been studied.The analysis of radiation characteristics indicates a gain comparable with other shapes.The antenna is capable of providing efficiency around 98%.The simulation using HFSS also yields results in conformity with the experimental results.Mode analysis is carried out and the modes are identified.The determination of the reflection characteristics through theoretical analysis using FDTD validates the multifrequency operation of the antenna,The antenna finds application in DCT,PCS and WLAN bands.

Development and Analysis of a Novel Isosceles Trapezoidal Dielectric Resonator Antenna For Wireless Communication

This thesis describes the development and analysis of an Isosceles Trapezoidal Dielectric Resonator Antenna (ITDRA) by realizing different DR orientations with suitable feed configurations enabling it to be used as multiband, dual band dual polarized and wideband applications. The motivation for this work has been inspired by the need for compact, high efficient, low cost antenna suitable for multi band application, dual band dual polarized operation and broadband operation with the possibility of using with MICs, and to ensure less expensive, more efficient and quality wireless communication systems. To satisfy these challenging demands a novel shaped Dielectric Resonator (DR) is fabricated and investigated for the possibility of above required properties by trying out different orientations of the DR on a simple microstrip feed and with slotted ground plane as well. The thesis initially discusses and evaluates recent and past developments taken place within the microwave industry on this topic through a concise review of literature. Then the theoretical aspects of DRA and different feeding techniques are described. Following this, fabrication and characterization of DRA is explained. To achieve the desired requirements as above both simulations and experimental measurements were undertaken. A 3-D finite element method (FEM) electromagnetic simulation tool, HFSSTM by Agilent, is used to determine the optimum geometry of the dielectric resonator. It was found to be useful in producing approximate results although it had some limitations. A numerical analysis technique, finite difference time domain (FDTD) is used for validating the results of wide band design at the end. MATLAB is used for modeling the ITDR and implementing FDTD analysis. In conclusion this work offers a new, efficient and relatively simple alternative for antennas to be used for multiple requirements in the wireless communication system.

Energy-Efficient Cluster based Routing Schemes for Static and Mobile Sensor Networks

The theme of the thesis is centred around one important aspect of wireless sensor networks; the energy-efficiency.The limited energy source of the sensor nodes calls for design of energy-efficient routing protocols. The schemes for protocol design should try to minimize the number of communications among the nodes to save energy. Cluster based techniques were found energy-efficient. In this method clusters are formed and data from different nodes are collected under a cluster head belonging to each clusters and then forwarded it to the base station.Appropriate cluster head selection process and generation of desirable distribution of the clusters can reduce energy consumption of the network and prolong the network lifetime. In this work two such schemes were developed for static wireless sensor networks.In the first scheme, the energy wastage due to cluster rebuilding incorporating all the nodes were addressed. A tree based scheme is presented to alleviate this problem by rebuilding only sub clusters of the network. An analytical model of energy consumption of proposed scheme is developed and the scheme is compared with existing cluster based scheme. The simulation study proved the energy savings observed.The second scheme concentrated to build load-balanced energy efficient clusters to prolong the lifetime of the network. A voting based approach to utilise the neighbor node information in the cluster head selection process is proposed. The number of nodes joining a cluster is restricted to have equal sized optimum clusters. Multi-hop communication among the cluster heads is also introduced to reduce the energy consumption. The simulation study has shown that the scheme results in balanced clusters and the network achieves reduction in energy consumption.The main conclusion from the study was the routing scheme should pay attention on successful data delivery from node to base station in addition to the energy-efficiency. The cluster based protocols are extended from static scenario to mobile scenario by various authors. None of the proposals addresses cluster head election appropriately in view of mobility. An elegant scheme for electing cluster heads is presented to meet the challenge of handling cluster durability when all the nodes in the network are moving. The scheme has been simulated and compared with a similar approach.The proliferation of sensor networks enables users with large set of sensor information to utilise them in various applications. The sensor network programming is inherently difficult due to various reasons. There must be an elegant way to collect the data gathered by sensor networks with out worrying about the underlying structure of the network. The final work presented addresses a way to collect data from a sensor network and present it to the users in a flexible way.A service oriented architecture based application is built and data collection task is presented as a web service. This will enable composition of sensor data from different sensor networks to build interesting applications. The main objective of the thesis was to design energy-efficient routing schemes for both static as well as mobile sensor networks. A progressive approach was followed to achieve this goal.

Mobility Metric based LEACH-Mobile Protocol

Cluster based protocols like LEACH were found best suited for routing in wireless sensor networks. In mobility centric environments some improvements were suggested in the basic scheme. LEACH-Mobile is one such protocol. The basic LEACH protocol is improved in the mobile scenario by ensuring whether a sensor node is able to communicate with its cluster head. Since all the nodes, including cluster head is moving it will be better to elect a node as cluster head which is having less mobility related to its neighbours. In this paper, LEACH-Mobile protocol has been enhanced based on a mobility metric “remoteness” for cluster head election. This ensures high success rate in data transfer between the cluster head and the collector nodes even though nodes are moving. We have simulated and compared our LEACH-Mobile-Enhanced protocol with LEACHMobile. Results show that inclusion of neighbouring node information improves the routing protocol.

An adaptive cluster based routing scheme for mobile wireless sensor networks

Clustering schemes improve energy efficiency of wireless sensor networks. The inclusion of mobility as a new criterion for the cluster creation and maintenance adds new challenges for these clustering schemes. Cluster formation and cluster head selection is done on a stochastic basis for most of the algorithms. In this paper we introduce a cluster formation and routing algorithm based on a mobility factor. The proposed algorithm is compared with LEACH-M protocol based on metrics viz. number of cluster head transitions, average residual energy, number of alive nodes and number of messages lost

An Effective Path Protection Method to Attain the Route Stability in MANET

With the increasing popularity of wireless network and its application, mobile ad-hoc networks (MANETS) emerged recently. MANET topology is highly dynamic in nature and nodes are highly mobile so that the rate of link failure is more in MANET. There is no central control over the nodes and the control is distributed among nodes and they can act as either router or source. MANTEs have been considered as isolated stand-alone network. Node can add or remove at any time and it is not infrastructure dependent. So at any time at any where the network can setup and a trouble free communication is possible. Due to more chances of link failures, collisions and transmission errors in MANET, the maintenance of network became costly. As per the study more frequent link failures became an important aspect of diminishing the performance of the network and also it is not predictable. The main objective of this paper is to study the route instability in AODV protocol and suggest a solution for improvement. This paper proposes a new approach to reduce the route failure by storing the alternate route in the intermediate nodes. In this algorithm intermediate nodes are also involved in the route discovery process. This reduces the route establishment overhead as well as the time to find the reroute when a link failure occurs.

Mobility Metric based LEACH-Mobile Protocol

Cluster based protocols like LEACH were found best suited for routing in wireless sensor networks. In mobility centric environments some improvements were suggested in the basic scheme. LEACH-Mobile is one such protocol. The basic LEACH protocol is improved in the mobile scenario by ensuring whether a sensor node is able to communicate with its cluster head. Since all the nodes, including cluster head is moving it will be better to elect a node as cluster head which is having less mobility related to its neighbours. In this paper, LEACH-Mobile protocol has been enhanced based on a mobility metric “remoteness” for cluster head election. This ensures high success rate in data transfer between the cluster head and the collector nodes even though nodes are moving. We have simulated and compared our LEACH-Mobile-Enhanced protocol with LEACHMobile. Results show that inclusion of neighbouring node information improves the routing protocol.