Descrição anátomo-topográfica do coração da paca (Agouti paca)

Background: The domestic animals heart is a conical hollow viscera, surrounded by pericardium, laterally compressed, accompanying the thorax shape. Atriums constituted the heart basis and their auricles partially bound the initial portion of the aorta and pulmonary trunk. In mammals, heart is kept suspended in the thoracic cavity and the pericardic sac is fixed dorsally by great veins and arteries roots, and ventrally fixed to the sternum, although its fixation to the diaphragm varies among species. This paper aimed to describe morphological aspects of the heart of the paca, the second biggest Brazilian rodent.Materials, Methods & Results: There were used 12 hearts of adult pacas for this study, obtained from the UNESP, Jaboticabal, SP, which died due fights or anesthesia during bandages or radiograph exams. The thoracic aorta was filled with colored latex and the animal was set in a 10% formaldehyde solution for at least 72 hours. The thoracic cavity was dissected and hearts individualized and measured with a paquimeter, lateromedially, craniocaudally and dorsoventrally. The paca heart is placed between the first and fifth intercostal space (ICS), in a craniocaudal oblique position; its basis is craniodorsally positioned, on the middle third between the first and second ICS and its apex is located near the sternodiaphragmatic joint, on the fifth ICS, tilted to the left antimere. The heart is surrounded by pericardium, which from ventrocaudally is originated the sternopericardic ligament, that continues as phrenopericardic ligament. At the heart basis, the rising of the pulmonary trunk was observed and the conus arteriosus formed a typical projection. The aorta also rised from the heart basis and its arch, which was caudally curved, crossed dorsally the pulmonary trunk; the right cranial and caudal cava veins drained to the right atrium. There is a left cranial cava vein, which surrounded the left atrium and joined the right caudal cava vein on the right atrium. The azygos vein joins the right cranial cava vein and four pulmonary veins drained to the left atrium. At palpation, a hard structure on the rising of the aorta was observed, similarly to a cartilaginous tissue, which would be part of the cardiac skeleton. The left and right coronary arteries were observed in all hearts.Discussion: The paca heart is anatomica and topographically similar to those of domestic mammals, differing from them for being placed one intercostal space more cranial and due to the presence of two cranial cava veins, the left and the right ones, besides the presence of the caudal cava vein. This vascular description is similar to that of small rodents, as rats and mice. In paca heart, the sinus venous, the terminal crest, the oval fossa, the atrioventricular valvae, the papillary muscles and tendinous cords, besides smooth atriums and auricles covered by pectinate muscles, were observed. The sternopericardic ligament, which is dorsally elongated as phrenopericardic ligament, is similar to the one present in humans, pigs, castors, and different from the one observed in carnivorous, that presents the phrenopericardic ligament and from the one of horses and ruminants, which present the sternopericardic ligament.

Revestimento de sementes de milho superdoce (sh2)

A semente de milho doce é leve e rugosa. A rugosidade torna difícil a classificação das sementes quanto à forma e ao tamanho e isso dificulta a semeadura. Uma solução para esse problema seria a utilização da técnica de revestimento. Assim, este trabalho teve por objetivo avaliar diferentes materiais de enchimento, cimentantes e corantes na peletização de sementes de milho superdoce e verificar quais combinações de materiais seriam eficientes na manutenção da qualidade fisiológica das sementes após o armazenamento e que permitissem vazão e distribuição uniformes durante a semeadura. Foram então testados doze materiais de enchimento (calcários 1 e 2, caulim, carvão vegetal ativado, areia, vermiculita, fubá de milho, farinha de trigo, polvilho de mandioca, amido de milho, celite e terra de diatomáceas), dois cimentantes (goma arábica e cascorez extra) e seis corantes (tintas guache, acrílica, plástica e para tecido, corante para alimento e gelatina). As avaliações da qualidade física e fisiológica das sementes revestidas e nuas foram efetuadas por meio dos testes: teor de água, fragmentação, peso de mil sementes, volume aparente e plantabilidade, germinação, primeira contagem da germinação e emergência de plântulas em campo. O revestimento de sementes de milho superdoce proporciona homogeneidade de forma e tamanho às sementes, melhora a vazão e a distribuição dos péletes na semeadura e não compromete a emergência de plântulas em campo depois de quatro meses de armazenamento.

Biometria da carcaça e peso de vísceras e de órgãos internos de bovinos mestiços alimentados com diferentes volumosos e fontes protéicas

Quarenta bovinos machos, com peso médio de 371 kg, foram distribuídos em um delineamento em blocos casualizado com esquema fatorial 3x3, dos quais quatro foram abatidos no início do experimento como referência, para avaliar a biometria das carcaças e o peso de vísceras e órgãos internos quando alimentados com diferentes fontes protéicas (uréia, Amiferm e farelo de soja) e volumosos (cana-de-açúcar e a silagem de milho e pastagem de capim Brachiaria brizantha). Não houve interação significativa volumosos x fontes protéicas e não houve diferença significativa entre as fontes protéicas para os parâmetros estudados. Para os volumosos, os pesos (em porcentagem do peso do corpo vazio - % PCV) do conteúdo estomacal (CRROA) e do conteúdo gastrintestinal (CGI) foram significativamente maiores para os animais alimentados com cana-de-açúcar (7,52 e 8,59% PCV, respectivamente) e não diferiram entre os alimentados com silagem de milho e capim, com médias de 5,10% PCV, para CRROA, e 5,89% PCV para CGI. Os animais mantidos em pastagem não apresentaram compacidade das carcaças diferente dos animais alimentados com os outros volumosos, enquanto os alimentados com cana-de-açúcar mostraram ser menos compactos que os alimentados com silagem de milho. As fontes protéicas também influenciaram a compacidade, que foi menor nos animais que receberam Amiferm e iguais para os que receberam uréia e farelo de soja. Conclui-se que os animais alimentados com cana-de-açúcar apresentam maior enchimento dos compartimentos digestivos e carcaças menos compactas.

Cadeia produtiva da farinha de mandioca na perspectiva da análise de filière e supply chain management :um estudo de caso das relações entre a agroindústria e a distribuição

This research aims to study the manioc flour productive chain in order to understand how the relationship between its segments happens, specially between the flour agroindustry and the distribuition. This research was made from a study of case that envolved three agro industries from the Potiguar wasteland and a company of food distribution. The filiére and the supply chain management analysis were applied to identify the functioning and the organization of the manioc flour productive chain. From the study of case it s noticed that the existing contracts, even the informal ones, has mutual benefits and it suggests that they be legalized

Utilização de subprodutos de origem animal em dietas para frangos de corte com base no conceito de proteínas bruta e ideal, no período de 43 a 49 dias de idade

Foi conduzido um experimento para avaliar a utilização de subprodutos de origem animal em rações para frangos de corte, formuladas com base nas proteínas bruta e ideal no período de 43 a 49 dias de idade. Foram utilizados 600 frangos machos distribuídos em arranjo fatorial 2x2+1, com duas fontes de proteína de origem animal (farinha de vísceras de aves e farinha de sangue bovino), dois conceitos de formulação (proteínas bruta e ideal) e uma ração testemunha à base de milho e de farelo de soja, com quatro repetições cada. As características avaliadas foram ganho de peso, consumo de ração, conversão alimentar, rendimento de carcaça, peito e porcentagem de gordura abdominal. Os melhores ganho em peso e conversão alimentar foram obtidos quando a dieta à base de milho e farelo de soja foi utilizada. As farinhas de vísceras e de sangue e os conceitos de formulação não exerceram influência sobre as características avaliadas.

Utilização de subprodutos de origem animal em dietas formuladas com base em proteína bruta e proteína ideal para frangos de corte de 22 a 42 dias de idade

Foi conduzido um experimento para avaliar a utilização de subprodutos de origem animal em dietas para frangos de corte de 22 a 42 dias de idade, formuladas com base nos conceitos de proteína bruta e proteína ideal. O delineamento foi inteiramente casualizado em esquema fatorial 2x2+1, ou seja, duas fontes de proteína de origem animal (farinha de vísceras de aves e farinha de sangue bovino), dois conceitos de formulação (proteína bruta e proteína ideal) e uma dieta controle à base de milho e farelo de soja, com quatro repetições. As características avaliadas foram ganho de peso, consumo de ração, conversão alimentar, rendimentos de carcaça e de peito e gordura abdominal. O ganho de peso, consumo de ração e conversão alimentar não foram afetados pelas fontes de proteína e conceitos de formulação, no entanto, o teor de gordura abdominal foi menor nas aves alimentadas com farinha de vísceras que naquelas alimentadas com dieta contendo farinha de sangue.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Utilização de subprodutos de origem animal em dietas formuladas com base em proteína bruta e proteína ideal para frangos de corte de 1 a 21 dias de idade

Foi conduzido um experimento para avaliar a utilização de subprodutos de origem animal em dietas para frangos de corte, formuladas com base na proteína bruta ou proteína ideal. O delineamento foi inteiramente casualizado em esquema fatorial 2x2+1, com duas fontes de proteína de origem animal (farinha de vísceras de aves e farinha de sangue bovino), dois conceitos de formulação (proteína bruta e proteína ideal) e uma dieta testemunha à base de milho e farelo de soja, com quatro repetições. As características avaliadas foram ganho de peso, consumo de ração e conversão alimentar. Houve efeito significativo das interações entre fontes de proteína de origem animal e conceitos de formulação para consumo de ração e ganho de peso. Quanto à conversão alimentar, não houve diferença significativa na interação e os melhores valores de conversão alimentar foram encontrados quando se incorporou a farinha de vísceras às dietas. Os melhores ganhos de peso foram obtidos com as dietas com farinha de sangue formuladas com base na proteína bruta e com farinha de vísceras de aves com base na proteína ideal.

Quantitative and qualitative characteristics of the non-carcass components and the meat of lambs fed sunflower seeds and vitamin E

The objective of this investigation was to evaluate the weight and percentage of the non-carcass components and the mineral content (macro minerals and trace minerals), crude protein, ether extract, moisture and vitamin E of the heart, liver, tongue, lungs, reticulum, kidneys and meat from the longissimus dorsi of lambs in feedlot finishing. Thirty-two non-castrated Ile de France male lambs, fed diets containing sunflower seeds and vitamin E from 15 to 32 kg of body weight were allotted in a completely randomized design in a 2 × 2 factorial arrangement. The weight of the gastrointestinal tract was higher in the lambs fed diets containing vitamin E (10%). No difference was observed in the liver as to the mineral matter, crude protein, ether extract, moisture (2.01; 20.03; 2.39 and 74.78 g/100 g, respectively), the macro minerals and trace minerals, except iron. In the tongue, lungs, reticulum, kidneys and meat there was no in fluence of diets in the studied variables. The liver and the meat presented different values of crude protein (20.01 and 18.34 g/100 g, respectively), and the heart (1.03 mg/100 g) showed a higher content of vitamin E. High contents of manganese, zinc and copper were observed in the liver. The evaluated non-carcass components were nutritionally equal to the sheep meat, once, in addition to their high yield in relation to the body weight at slaughter, the non-carcass components are sources of nutrients.

Palmistichus elaeisis (Hymenoptera: Eulophidae) parasitizing pupae of Citioica anthonilis (Lepidoptera: Saturniidae) collected on Piptadenia gonoacantha (Fabaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Obtenção e caracterização de farinha de frutas e vegetais através do uso de um sistema de secagem solar de baixo custo

In this work a solar drying system for food dehydration was developed. It is a direct exposition drying apparatus that uses solar energy to heat the circulating air. First, the construction and assembly of this apparatus was described, in which was used scrap wraps of used tires for thermal insulation, allowing the reuse of solid waste, being an ecologically correct recycling option. After, the results obtained in experiments for cashew drying showed the thermal and economical feasibility of the proposed solar drying system, focusing on the process of flour production and in its chemical characterization. It was also demonstrated the social importance of this production for socially excluded people, since the value added to this fruit, in relation to its in nature form, may represent an option for job and income generation. The main features of the proposed dryer are its low cost and its easy fabrication and assembly process. After cashew drying, the obtained product was processed into flour by using a knife mill and it was added crushed rapadura to reduce the rancid taste caused by tannin

Estudo de um secador solar fabricado apartir de sucata de tambor de polietileno

The scarcity of farmland, reducing the supply of irrigation water and lack of technologies for conservation, makes the globalized world facing serious difficulties in the production of food for its population. The most viable outlet for this dilemma is the dissemination of technologies, economically viable and available to the whole population, for dehydration of perishable foods produced. This paper presents a solar dryer of direct exposure to the production of dried fruit, made from recycled polyethylene drum of 200 liters, used for storing water or trash. The drum was sectioned in half in its longitudinal axis and has its halves together forming a trough-like structure. It describes the processes of construction and assembly of solar dryer proposed, whose main characteristic its low cost, and was designed for use by people with low income, for processing fruits widely available in our region (mango, banana, guava, cashew, pineapple, tomato and others) in dried fruit and flour, contributing significantly to increase the life of these foods. The nuts and flours can be used for own consumption and for marketing jobs and income generation. Tests were conducted to diagnose the feasibility of using solar dryer for the various types of tropical fruits. Were also compared parameters such as drying times and thermal efficiency obtained with the prototype found in the specialized literature in food dehydration. The drying times in the dryer were obtained competitive with those obtained in other models of dryers LMHES developed

Funcionalidade dos extratos fenólicos obtidos pelo cultivo semi-sólido de resíduos de abacaxi (Ananas comusus L.) e goiaba (Psidium guajava L.)

Solid substrate cultivation (SSC) has become an efficient alternative towards rational use of agro industrial wastes and production of value-added products, mainly in developing countries. This work presents the production and functional application results of phenolic extracts obtained by solid substrate cultivation of pineapple (Ananas comosus L.) and guava (Psidium guajava L.) residues associated to soy flour and bioprocessed by Rhizopus oligosporus fungus. Two experimental groups were tested: (1) 9g of fruit residue and 1g of soy flour (A9 or G9); (2) 5g of fruit residue and 5g of soy flour (A5 or G5). After SSC, 100ml of distilled water was added to each Erlenmeyer flask containing 10g of bioprocessed material in order to obtain the phenolic extracts. Samples were taken every two days for total phenolic concentration (TPC) and antioxidant capacity evaluation by DPPH test during 12-day cultivation. The 2-day and 10-d ay extracts were selected and concentrated by ebullition until 1/10 of original volume was reached. After that, both non-concentrated and concentrated extracts were evaluated for their antimicrobial activity against Staphylococcus aureus and Salmonella enterica and a-amylase inhibitory capacity. It was observed an inverse relationship between total phenolic concentration (TPC) and antioxidant capacity during the cultivation. Besides that, the concentrated pineapple samples after two days were able to inhibit both pathogens tested, especially S. aureus. Guava concentrated extracts after 2 days showed expressive inhibition against S. enterica, but negative results against S. aureus growth. When it comes to a-amylase inhibition, A9 extracts after 2 days, both concentrated or not, completely inhibited enzyme activity. Similar behavior was observed for G9 samples, but only for concentrated samples. It was shown that concentration by ebullition positively affected the enzymatic inhibition of G9 and A9 samples, but on the other side, decreased antiamylase activity of A5 and G5 samples

Avaliação físico-química e funcional da algaroba prosopis juliflora proveniente da mesorregião agreste do Rio Grande do Norte

Algaroba (Prosopis juliflora) is a typical legume from arid and semi arid regions, which is composed by sugar-rich pods and high protein seeds. Phenolic compounds are secondary metabolites recognized as potent bioactive compounds, found in several vegetables.Therefore, the objective of this work is to characterize the algaroba flour in terms of its physicalchemical composition, total phenolic content, antioxidant activity by DPPH and ABTS methods, a-amylase and a-glycosidase inhibition, as well as to analyze its organic compounds by high performance liquid chromatography (HPLC). Three experimental groups were investigated (seeds, seeds and pod together and only pod), which were prepared by oven drying and posterior grinding. Water and ethanol extracts (70, 80, 100% v/v) were prepared and used for functional studies. Organic compounds were detected by using HPLC equipment coupled to mass spectrometer. Results show important physical-chemical differences among the experimental groups, seeds, seeds and pod together and only pod. The algarroba seed flour is high in protein (49.49%) and fat (3.10%), while the pod flour is especially rich in sugar (60.3% to 67.9%). Algaroba phenolics are concentrated in pod flour, mainly in water extracts (1.30 mg GAEQ/100g sample). All seed extracts showed high DPPH activity and maximum antioxidant activity was registered for ethanol 80% extracts (19.81 μM Trolox/g sample). The ABTS activity ranged from 9.73 to 12.74 μM Trolox/g sample. Nearly all the extracts were able to inhibit α-amylase activity mildly (30.50% to 48.80%), while the maximum α-glycosidase inhibition was observed for pod water extracts (81.03%). Algaroba water extracts proven to be especially rich in organic compounds, observed by the high number of chromatographic peaks. Results demonstrate that algaroba is a potential candidate for further investigations concerning its possible functional applications

Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional