779 resultados para Vegetal fibers
Resumo:
Cellulose nanowhiskers were prepared by sulfuric acid hydrolysis from coconut husk fibers which had previously been submitted to a delignification process. The effects of preparation conditions on the thermal and morphological behavior of the nanocrystals were investigated. Cellulose nanowhisker suspensions were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and X-ray diffraction. Results showed that it was possible to obtain ultrathin cellulose nanowhiskers with diameters as low as 5 nm and aspect ratio of up to 60. A possible correlation between preparation conditions and particle size was not observed. Higher residual lignin content was found to increase thermal stability indicating that by controlling reaction conditions one can tailor the thermal properties of the nanowhiskers. Published by Elsevier Ltd.
Resumo:
This work focuses the familiar cajuculture at Serra of Mel (RN) that presents a geographic and climatic structure favourable to the development of the cajuculture; the interaction between the ambient factors and agriculture in the region provides a propitious environment to the culture of the cashew; the objective of present work was associate ambient, economic, social and cultural factors of this municipy with the possibility of a sustainable agriculture associated with the vegetal biotechnology
Resumo:
The mangrove is a coastal ecosystem of the big ecological importance, showing high fragility front by natural process and the human interventions in the coastal zone. This research has objective to analyses the relation between mangrove species distribution and geochemical parameters variation of the water and soil in Apodi/Mossoro estuary, located in the Rio Grande do Norte state north coastline. The results were obtained from floristic and structural analysis of the vegetation and Quick Bird satellite images interpretation (collected in 2006 year), manipulated with ENVI 4.3 and ArcGIS 9.2 software s. This estuary was characterized by to presents a gradient of the salinity around 40 kilometers extension, finding amount between 50 and 90 g/l-1. Will be identified the formation of the mix vegetation formation in the estuary mount, where the water salinity no show express wide variation on seawater (36 g/l-1), finding species: Rhizophora mangle L., Laguncularia racemosa (L.) C. F. Gaertn, Avicennia schaueriana Stap. & Leechman e Avicennia germinans L. Along of the estuary, have a streak formation of the vegetation composed by Avicennia spp. and L. racemosa. In high estuary, where the salinities value stay above 60 g/l-1, only A. germinans predominate in dwarf form. In this sense, the salinity is as a limiting factor of stress on the mangrove vegetation as it enters the estuary, this parameter should be taken into account when drawing up management plans and environmental restoration in the estuary in question
Resumo:
This paper aims to describe the familiar cotton culture in the districts of Tangará and Triunfo Potiguar, located in the state of Rio Grande do Norte. It relates specific problems that small cotton agriculturists face in the cotton production and sale as well as their perception in relation to public policies that have been put into practice in these districts. The research revealed soils with potentiality for the cotton culture, but that are not being cultivated for anything else but subsistence, not being able to become productive, specifically through the cotton culture. That activity should be practiced so that it preserves the environment and the familiar farmers themselves, since it was verified they are constant1y exposed to health problems due to insecticides use. In what refers to fomentation policies it was observed that bureaucracy delays the liberation of the money destined to production, seeds delivery and other actions related to production and commercialization. Some procedures such as information and training about productivity development and attention with the environrnent and infrastructure are recommended. The results indicate lack of investments, rural credit and technical help, main1y in Triunfo Potiguar. There is unanimity, from the rural farmers of that district in what refers to the desire of improving the production and remaining in that activity. In this sense, the contribution of this research for the most appropriate culture production can be materialized through the technique of tissue's culture, aimed at obtaining plants that are resistant to diseases. The data indicated that the hormonal supplementations used induced regenerative calluses making in vitro morphogenesis possible in alI tested varieties. The use of the activated coal antioxidant was efficient, reducing oxidation, however not suppressing it. The results lead to an opportunity for the familiar tàrmers from Rio Grande do Norte enlarge the cotton culture, because to obtain plants that are resistant to diseases implies in insecticides reduction, propitiating smaller impact to the atmosphere and less cost
Resumo:
Background: An experimental study was done to assess the ability of the vegetal polymer miniplates and screws to repair defects of the orbital floor.Methods: An artificial standard-sized defect was created in the bony floor of right orbit of 45 albino rabbits. The animals were divided into three experimental groups: control group (G1) involving animals with orbital floor defect and no treatment; titanium group (G2) containing animals with orbital floor defect repaired by titanium miniplates and screws; vegetal polymer group (G3) composed of animals with similar orbital floor defects repaired by vegetal polymer miniplates and screws. Throughout the course of the experiment, the animals were clinically evaluated. At 15, 30 and 60 days after surgery, the animals were killed. They were X-rayed immediately after the floor defect and at the moment of sacrifice. Histological and morphometric evaluation of inflammatory reaction and bone healing was done. Data were statistically evaluated.Results: No implants were extruded. Bone consolidation was similar in G2 and G3 and better than in G1 group animals. Inflammatory reaction was most pronounced in animals of G3 15 days after surgery, and it subsided over time.Conclusion: Vegetal polymer miniplates and screws induces small inflammatory reaction and had the ability to stimulate bone growth with good integration in the orbital floor defect allowing to consider the vegetal polymer adequate option to treat orbital floor defects. Future studies involving long-term follow-up and biomechanical tests to evaluate material resistance to traction are needed.
Resumo:
The aim of this work was to evaluate the quality of Hass avocado submitted to application of propolis and vegetable wax. The selected fruits were submitted to the treatments (1) without wax and without propolis, (2) with vegetable wax, (3) propolis alcoholic extract 100%, (4) wax and etanol 70%, (5) propolis alcoholic extract 2% and wax, (6) propolis alcoholic extract 4% and wax, (7) propolis alcoholic extract 6% and wax, (8) propolis alcoholic extract 8% and wax, and (9) propolis alcoholic extract 10% and wax. The fruits were maintained under refrigeration (10 +/- 1 degrees C and 90 +/- 5% relative humidity), being appraised every three days for 15 days and more 3 days of commercialization simulation at room temperature (23 +/- 1 degrees C and 18% relative humidity). The evaluation parameters were the weight loss, respiratory activity, pH, firmness, tritable acidity (AT), soluble solids (SS), and ratio. The results of weigth loss, respiratory activity and firmness were the most significant to show the difference among the treatments. 'Hass' avocado fruits submitted the application of propolis associated the vegetable wax present smaller weight loss, CO2 production and firmness in relation to the control fruits. The fruits of the treatment with propolis alcoholic extract 2% and wax presented the most promising results.
Resumo:
Placa e espaçador de polímero derivado do óleo de mamona (PDOM) (Ricinus communis) foram avaliados clínica, radiográfica e histologicamente na tração linear, fixação e fusão vertebral cervical em 20 cães adultos, sem raça definida, pesando entre 17 e 22kg. Foram sacrificados quatro animais aos 10, 30, 60, 90 e 120 dias de pós-operatório. Após exposição da coluna cervical, por acesso ventral, o disco intervertebral de C4-C5 foi fenestrado e a abordagem ao canal medular foi feita por meio de fenda óssea. Um espaçador de PDOM foi colocado preenchendo o defeito ósseo. Os corpos vertebrais C4-C5 foram fixados com placa do mesmo material, utilizando-se dois parafusos corticais em cada corpo vertebral. Apenas um animal apresentou déficit neurológico no pós-operatório imediato. Radiograficamente as vértebras mostravam-se normais e alinhadas, sem colapso do espaço intervertebral, porém não houve neoformação óssea entre as vértebras. Ao exame mielográfico, não houve compressão da medula espinhal. Os implantes foram efetivos em manter a tração linear e fixação das vértebras cervicais e não ocorreu a fusão vertebral.
Resumo:
Statement of problem. Implant overdenture prostheses are prone to acrylic resin fracture because of space limitations around the implant overdenture components.Purpose. The purpose of this study was to evaluate the influence of E-glass fibers and acrylic resin thickness in resisting acrylic resin fracture around a simulated overdenture abutment.Material and methods. A model was developed to simulate the clinical situation of an implant overdenture abutment with varying acrylic resin thickness (1.5 or 3.0 mm) with or without E-glass fiber reinforcement. Forty-eight specimens with an underlying simulated abutment were divided into 4 groups (n=12): 1.5 mm acrylic resin without E-glass fibers identified as thin with no E-glass fiber mesh (TN-N); 1.5 mm acrylic resin with E-glass fibers identified as thin with E-glass fiber mesh (TN-F); 3.0 mm acrylic resin without E-glass fibers identified as thick without E-glass fiber mesh (TK-N); and 3.0 mm acrylic resin with E-glass fibers identified as thick with E-glass fiber mesh (TK-F). All specimens were submitted to a 3-point bending test and fracture loads (N) were analyzed with a 2-way ANOVA and Tukey's post hoc test (alpha=.05).Results. The results revealed significant differences in fracture load among the 4 groups, with significant effects from both thickness (P<.001) and inclusion of the mesh (P<.001). Results demonstrated no interaction between mesh and thickness (P=.690). The TN-N: 39 +/- 5 N; TN-F: 50 +/- 6.9 N; TK-N: 162 +/- 13 N; and TK-F: 193 +/- 21 N groups were all statistically different (P<.001).Conclusions. The fracture load of a processed, acrylic resin implant-supported overdenture can be significantly increased by the addition of E-glass fibers even when using thin acrylic resin sections. on a relative basis, the increase in fracture load was similar when adding E-glass fibers or increasing acrylic resin thickness. (J Prosthet Dent 2011;106:373-377)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Paclobutrazol applied to the soil is used for the production management of mangoes in most of the orchards, but it presents as disadvantage the greater persistence in plant and soil. Three growth regulators (prohexadione-Ca, trinexapac-ethyl and chlormequat chloride) were foliar applied, at two dosages and compared to paclobutrazol applied as soil-drench. The experiment was conducted in the region of the Sao Francisco Valley, Petrolina, PE, from December 2007 to July 2008, in a mango orchard that has a spacing of 8 m between lines and 5 m between plants. In order to compare the effects of the treatment, data were evaluated regarding to vegetative growth (number, length and leaf number of vegetative branches) and flowering (percentage and panicles length). The combination of PBZ, soil applied with ProCa, foliar applied was the most efficient in controlling vegetative growth of branches of the mango 'Kent', but not regarding to flowering, where there were no differences between treatments.
Resumo:
A pitaya é uma cactácea originária das florestas tropicais americanas que produz frutos exóticos bem apreciados e comercializados, principalmente no continente asiático. Contudo, ainda é uma espécie vegetal que demanda informações técnicas de cultivo nas áreas agrícolas brasileiras, motivando pesquisas em várias áreas do conhecimento. Objetivou-se avaliar diferentes substratos no enraizamento de cladódios imersos e não imersos no regulador de crescimento, ácido naftalenacético (ANA), na formação e desenvolvimento inicial de raízes em estacas de Hylocereus undatus, resultando em mudas mais vigorosas e de melhor qualidade. O experimento foi conduzido sob ripado no Departamento de Produção Vegetal - setor de Horticultura da Faculdade de Ciências Agronômicas no campus de Botucatu - UNESP. O delineamento experimental foi o inteiramente aleatorizado em esquema fatorial 4 x 2 (substratos x condições) com quatro repetições. Após 60 dias da instalação do experimento foram avaliados: massa fresca e seca da parte aérea, massa fresca e seca das raízes e o comprimento da maior raiz. O crescimento e desenvolvimento radicular inicial de mudas não são influenciados pelo regulador vegetal ANA. Os substratos com a presença de areia são os mais adequados para a formação de mudas vigorosas e de boa qualidade. A mistura areia + esterco bovino proporciona maior acúmulo de fitomassa no sistema radicular de pitaya (H. undatus).
Resumo:
O objetivo do trabalho foi avaliar o efeito de regulador vegetal e de bioestimulante na indução floral do maracujazeiro-amarelo em condições não-indutivas, em Araguari-MG. Foram identificados e podados 12 ramos terciários por parcela (02-04-05), sendo 6 deles expostos de um lado da espaldeira, com luminosidade predominante pela manhã e 6 do outro lado da espaldeira, com luminosidade à tarde. O delineamento experimental foi em parcelas subdivididas, com 7 tratamentos principais (parcelas): 0mg L-1 (testemunha); 100mg L-1; 200mg L-1 e 300mg L-1 de regulador vegetal GA3 (i.a.); 2,08 mL L-1; 4,17mL L-1 e 6,25mL L-1 de bioestimulante Stimulate® (i.a.), em duas aplicações foliares (09-04-02 e 09-05-02), acrescidas de espalhante adesivo Silwett® a 0,05%. Além desses, foram utilizados 2 tratamentos secundários (subparcelas): exposição dos ramos à luminosidade da manhã e da tarde, com 4 repetições de 3 plantas por parcela. Cada subparcela foi um dos dois lados da espaldeira. As médias foram comparadas pelo teste de Tukey, a 5% de probabilidade. Realizou-se, aos 75 dias, a avaliação nos dois lados da espaldeira do comprimento dos ramos e entrenós, número de nós, de folhas e de botões florais. As variáveis estudadas não foram influenciadas pelo uso de GA3 e Stimulate®, no entanto houve diferença quando os ramos ficaram expostos à luminosidade da manhã em relação àqueles com luminosidade à tarde.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)