Polyplexes based on ultrapure oligochitosans: design, characterization and applications for gene therapy.

253 p.

Design, construction, and applications of a high-resolution terahertz time-domain spectrometer

This thesis reports on the design, construction, and initial applications of a high-resolution terahertz time-domain ASOPS spectrometer. The instrument employs asynchronous optical sampling (ASOPS) between two Ti:sapphire ultrafast lasers operating at a repetition rate of approximately 80 MHz, and we thus demonstrate a THz frequency resolution approaching the limit of that repetition rate. This is an order of magnitude improvement in resolution over typical THz time-domain spectrometers. The improved resolution is important for our primary effort of collecting THz spectra for far-infrared astronomy. We report on various spectroscopic applications including the THz rotational spectrum of water, where we achieve a mean frequency error, relative to established line centers, of 27.0 MHz. We also demonstrate application of the THz system to the long-duration observation of a coherent magnon mode in a anti-ferromagnetic yttrium iron oxide (YFeO3) crystal. Furthermore, we apply the all-optical virtual delay line of ASOPS to a transient thermoreflectance experiment for quickly measuring the thermal conductivity of semiconductors.

Design, synthesis and antiproliferative activity of hydroxyacetamide derivatives against HeLa cervical carcinoma cell and breast cancer cell line

Purpose: To design and develop a new series of histone deacetylase inhibitors (FP1 - FP12) and evaluate their inhibitory activity against hydroxyacetamide (HDAC) enzyme mixture-derived HeLa cervical carcinoma cell and MCF-7. Methods: The designed molecules (FP1 - FP12) were docked using AUTODOCK 1.4.6. FP3 and FP8 showed higher interaction comparable to the prototypical HDACI. The designed series of 2-[[(3- Phenyl/substituted Phenyl-[4-{(4-(substituted phenyl)ethylidine-2-Phenyl-1,3-Imidazol-5-One}](-4H- 1,2,4-triazol-5-yl)sulfanyl]-N-hydroxyacetamide derivatives (FP1-FP12) was synthesized by merging 2- [(4-amino-3-phenyl-4H- 1, 2, 4-triazol-5-yl) sulfanyl]-N-hydroxyacetamide and 2-{[4-amino-3-(2- hydroxyphenyl)-4H-1,2, 4-triazol-5-yl]sulfanyl}-N hydroxyacetamide derivatives with aromatic substituted oxazolone. The biological activity of the synthesized molecule (FP1-FP12) was evaluated against HDAC enzyme mixture-derived HeLa cervical carcinoma cell and breast cancer cell line (MCF-7). Results: HDAC inhibitory activity of FP10 showed higher IC50 (half-maximal concentration inhibitory activity) of 0.09 μM, whereas standard SAHA molecule showed IC50 of 0.057 μM. On the other hand, FP9 exhibited higher GI50 (50 % of maximal concentration that inhibited cell proliferation) of 22.8 μM against MCF-7 cell line, compared with the standard, adriamycin, with GI50 of (-) 50.2 μM. Conclusion: Synthesis, spectral characterization, and evaluation of HDAC inhibition activity and in vitro anticancer evaluation of novel hydroxyacetamide derivatives against MCF-7 cell line have been achieved. The findings indicate the emergence of potentialanticancer compounds.

Design, Fabrication, and Mechanical Property Analysis of 3D Nanoarchitected Materials

Recent developments in micro- and nanoscale 3D fabrication techniques have enabled the creation of materials with a controllable nanoarchitecture that can have structural features spanning 5 orders of magnitude from tens of nanometers to millimeters. These fabrication methods in conjunction with nanomaterial processing techniques permit a nearly unbounded design space through which new combinations of nanomaterials and architecture can be realized. In the course of this work, we designed, fabricated, and mechanically analyzed a wide range of nanoarchitected materials in the form of nanolattices made from polymer, composite, and hollow ceramic beams. Using a combination of two-photon lithography and atomic layer deposition, we fabricated samples with periodic and hierarchical architectures spanning densities over 4 orders of magnitude from ρ=0.3-300kg/m³ and with features as small as 5nm. Uniaxial compression and cyclic loading tests performed on different nanolattice topologies revealed a range of novel mechanical properties: the constituent nanoceramics used here have size-enhanced strengths that approach the theoretical limit of materials strength; hollow aluminum oxide (Al₂O₃) nanolattices exhibited ductile-like deformation and recovered nearly completely after compression to 50% strain when their wall thicknesses were reduced below 20nm due to the activation of shell buckling; hierarchical nanolattices exhibited enhanced recoverability and a near linear scaling of strength and stiffness with relative density, with E∝ρ^1.04 and σy∝ρ^1.17 for hollow Al₂O₃ samples; periodic rigid and non-rigid nanolattice topologies were tested and showed a nearly uniform scaling of strength and stiffness with relative density, marking a significant deviation from traditional theories on “bending” and “stretching” dominated cellular solids; and the mechanical behavior across all topologies was highly tunable and was observed to strongly correlate with the slenderness λ and the wall thickness-to-radius ratio t/a of the beams. These results demonstrate the potential of nanoarchitected materials to create new highly tunable mechanical metamaterials with previously unattainable properties.

Subject response rates in case-control studies of cancer : time trends, study design determinants, and quality of reporting

Objectifs: Examiner les tendances temporelles, les déterminants en lien avec le design des études et la qualité des taux de réponse rapportés dans des études cas-témoins sur le cancer publiées lors des 30 dernières années. Méthodes: Une revue des études cas-témoins sur le cancer a été menée. Les critères d'inclusion étaient la publication (i) dans l’un de 15 grands périodiques ciblés et (ii) lors de quatre périodes de publication (1984-1986, 1995, 2005 et 2013) couvrant trois décennies. 370 études ont été sélectionnées et examinées. La méthodologie en lien avec le recrutement des sujets et la collecte de données, les caractéristiques de la population, les taux de participation et les raisons de la non-participation ont été extraites de ces études. Des statistiques descriptives ont été utilisées pour résumer la qualité des taux de réponse rapportés (en fonction de la quantité d’information disponible), les tendances temporelles et les déterminants des taux de réponse; des modèles de régression linéaire ont été utilisés pour analyser les tendances temporelles et les déterminants des taux de participation. Résultats: Dans l'ensemble, les qualités des taux de réponse rapportés et des raisons de non-participation étaient très faible, particulièrement chez les témoins. La participation a diminué au cours des 30 dernières années, et cette baisse est plus marquée dans les études menées après 2000. Lorsque l'on compare les taux de réponse dans les études récentes a ceux des études menées au cours de 1971 à 1980, il y a une plus grande baisse chez les témoins sélectionnés en population générale ( -17,04%, IC 95%: -23,17%, -10,91%) que chez les cas (-5,99%, IC 95%: -11,50%, -0,48%). Les déterminants statistiquement significatifs du taux de réponse chez les cas étaient: le type de cancer examiné, la localisation géographique de la population de l'étude, et le mode de collecte des données. Le seul déterminant statistiquement significatif du taux de réponse chez les témoins hospitaliers était leur localisation géographique. Le seul déterminant statistiquement significatif du taux de participation chez les témoins sélectionnés en population générale était le type de répondant (sujet uniquement ou accompagné d’une tierce personne). Conclusion: Le taux de participation dans les études cas-témoins sur le cancer semble avoir diminué au cours des 30 dernières années et cette baisse serait plus marquée dans les études récentes. Afin d'évaluer le niveau réel de non-participation et ses déterminants, ainsi que l'impact de la non-participation sur la validité des études, il est nécessaire que les études publiées utilisent une approche normalisée pour calculer leurs taux de participation et qu’elles rapportent ceux-ci de façon transparente.

DESIGN, SYNTHESIS AND APPLICATIONS OF FLUORESCENT AND ELECTROCHEMICAL PROBES

“Seeing is believing” the proverb well suits for fluorescent imaging probes. Since we can selectively and sensitively visualize small biomolecules, organelles such as lysosomes, neutral molecules, metal ions, anions through cellular imaging, fluorescent probes can help shed light on the physiological and pathophysiological path ways. Since these biomolecules are produced in low concentrations in the biochemical pathways, general analytical techniques either fail to detect or are not sensitive enough to differentiate the relative concentrations. During my Ph.D. study, I exploited synthetic organic techniques to design and synthesize fluorescent probes with desirable properties such as high water solubility, high sensitivity and with varying fluorescent quantum yields. I synthesized a highly water soluble BOIDPY-based turn-on fluorescent probe for endogenous nitric oxide. I also synthesized a series of cell membrane permeable near infrared (NIR) pH activatable fluorescent probes for lysosomal pH sensing. Fluorescent dyes are molecular tools for designing fluorescent bio imaging probes. This prompted me to design and synthesize a hybrid fluorescent dye with a functionalizable chlorine atom and tested the chlorine re-activity for fluorescent probe design. Carbohydrate and protein interactions are key for many biological processes, such as viral and bacterial infections, cell recognition and adhesion, and immune response. Among several analytical techniques aimed to study these interactions, electrochemical bio sensing is more efficient due to its low cost, ease of operation, and possibility for miniaturization. During my Ph.D., I synthesized mannose bearing aniline molecule which is successfully tested as electrochemical bio sensor. A Ferrocene-mannose conjugate with an anchoring group is synthesized, which can be used as a potential electrochemical biosensor.

Subject response rates in case-control studies of cancer : time trends, study design determinants, and quality of reporting

Objectifs: Examiner les tendances temporelles, les déterminants en lien avec le design des études et la qualité des taux de réponse rapportés dans des études cas-témoins sur le cancer publiées lors des 30 dernières années. Méthodes: Une revue des études cas-témoins sur le cancer a été menée. Les critères d'inclusion étaient la publication (i) dans l’un de 15 grands périodiques ciblés et (ii) lors de quatre périodes de publication (1984-1986, 1995, 2005 et 2013) couvrant trois décennies. 370 études ont été sélectionnées et examinées. La méthodologie en lien avec le recrutement des sujets et la collecte de données, les caractéristiques de la population, les taux de participation et les raisons de la non-participation ont été extraites de ces études. Des statistiques descriptives ont été utilisées pour résumer la qualité des taux de réponse rapportés (en fonction de la quantité d’information disponible), les tendances temporelles et les déterminants des taux de réponse; des modèles de régression linéaire ont été utilisés pour analyser les tendances temporelles et les déterminants des taux de participation. Résultats: Dans l'ensemble, les qualités des taux de réponse rapportés et des raisons de non-participation étaient très faible, particulièrement chez les témoins. La participation a diminué au cours des 30 dernières années, et cette baisse est plus marquée dans les études menées après 2000. Lorsque l'on compare les taux de réponse dans les études récentes a ceux des études menées au cours de 1971 à 1980, il y a une plus grande baisse chez les témoins sélectionnés en population générale ( -17,04%, IC 95%: -23,17%, -10,91%) que chez les cas (-5,99%, IC 95%: -11,50%, -0,48%). Les déterminants statistiquement significatifs du taux de réponse chez les cas étaient: le type de cancer examiné, la localisation géographique de la population de l'étude, et le mode de collecte des données. Le seul déterminant statistiquement significatif du taux de réponse chez les témoins hospitaliers était leur localisation géographique. Le seul déterminant statistiquement significatif du taux de participation chez les témoins sélectionnés en population générale était le type de répondant (sujet uniquement ou accompagné d’une tierce personne). Conclusion: Le taux de participation dans les études cas-témoins sur le cancer semble avoir diminué au cours des 30 dernières années et cette baisse serait plus marquée dans les études récentes. Afin d'évaluer le niveau réel de non-participation et ses déterminants, ainsi que l'impact de la non-participation sur la validité des études, il est nécessaire que les études publiées utilisent une approche normalisée pour calculer leurs taux de participation et qu’elles rapportent ceux-ci de façon transparente.

Dairy Farm Layout and Design: Building and Yard Design, Warm Climates

The current knowledge revised in this article describes a wide range of facilities in common use on dairy cattle farms in warm climates. A dairy cattle farm consists of several facilities, such as housing system, yards, manure pits, milking center, environmental protection structures, forage storage, and several machines for different facilities. Any facility design tends to be a compromise, often between many factors, and no single solution will be optimal for all concerned.

Design, modelling and preliminary characterisation of microneedle-based electrodes for tissue electroporation in vivo

We analysed the use of microneedle-based electrodes to enhance electroporation of mouse testis with DNA vectors for production of transgenic mice. Different microneedle formats were developed and tested, and we ultimately used electrodes based on arrays of 500 μm tall microneedles. In a series of experiments involving injection of a DNA vector expressing Green Fluorescent Protein (GFP) and electroporation using microneedle electrodes and a commercially available voltage supply, we compared the performance of flat and microneedle electrodes by measuring GFP expression at various timepoints after electroporation. Our main finding, supported by both experimental and simulated data, is that needles significantly enhanced electroporation of testis.

Integrating Life-Design Counseling and Psychotherapy: Possibilities and Practices

The relationship between career counseling and psychotherapy is not a new subject. The debate allows the affirmation of career counseling as a dimension of personal counseling and recognizes the close relationship between psychosocial and career issues (Blustein & Spengler, 1995). The connection between these two approaches paves the way for the integration of career counseling with psychotherapy. Indeed, the inseparability of mental health and career issues frequently leads psychotherapists to help their clients to deal with work satisfaction, underemployment or unemployment through psychotherapy. Moreover, when working with specific populations (e.g., people with intellectual disabilities and people with addiction or mental health problems), psychotherapy calls for occupational integration to consolidate and enhance therapeutic gains (Blustein, 1987; Jordan & Kahnweiler, 1995; Leff & Warner, 2006).

Heterogeneous Catalysts: Design, Applications and Research Insights

The cyclization of pseudoionone yields a mixture of alpha-ionone, beta-ionone and gamma-ionone. By careful control of reagent and reaction conditions, either the alpha- and beta- isomer can be favoured. The alpha-ionone has violet odour and is widely used in perfumery and flavours. beta-Ionone is the main precursor of Vitamin A and beta-carotene. Traditionally, strong homogeneous catalysts, like sulphuric acid and phosphoric acid have been used. These problems can be overcome by the use of solid acid catalysts. This work reports the cyclization of pseudoionone over USY zeolites, at 80ºC. USY It is observed that the initial activity increases with the Si/Al ratio of zeolite until a maximum, which is obtained with USY3. With higher Si/Al ratio, a decrease in the catalytic activity is observed. Selectivity to ionone isomers is around 42 %, at 75% of pseudoionone conversion, after 24 h of reaction. USY3 zeolite was reused four times with the same catalyst sample in the same condicions. It was observed a stabilization of the catalytic activity, after the second use.

Design, Synthesis and Bioassays of 3-substituted-3-hydroxyoxindoles for cholinesterase inhibition

Based on the positive bioassay results of the known oxindole hit compound rac-1-benzyl-3-hydroxy-3-phenylindolin-2-one which showed significant inhibition of butyrylcholinesterase (BuChE) (IC50=7.41 μM), a library of 31 analogues of 3-substituted-3-hydroxyoxindoles was synthesized and screened for both acetylcholinesterase (AChE) and BuChE activity. Our bioassays revealed that some of the new compounds exhibited moderate inhibition of eel AChE (EeAChE) and very good inhibition of equine serum BuChE (EqBuChE) with a best IC50 of 1.02 μM. On the basis of these results, the lead compound 1-((1-benzylpiperidin-4-yl)methyl)-3-hydroxy-3-phenylindolin-2-one was designed, which was shown to interact well with the enzymes active sites by molecular docking, was synthesized and upon bioassay gave an IC50 of 6.61 μM for BuChE. Interestingly, when we separated rac-benzyl-3-hydroxy-3-phenylindolin-2-one into the individual enantiomers (R)- and (S)-benzyl-3-hydroxy-3-phenylindolin-2-one it was the latter enantiomer that gave the best IC50 of 6.19 μM for BuChE.

Design, production and testing of innovative key components of HEV/BEV powertrains

Through modelling activity, experimental campaigns, test bench and on-field validation, a complete powertrain for a BEV has been designed, assembled and used in a motorsport competition. The activity can be split in three main subjects, representing the three key components of an BEV vehicle. First of all a model of the entire powertrain has been developed in order to understand how the various design choices will influence the race lap-time. The data obtained was then used to design, build and test a first battery pack. After bench tests and track tests, it was understood that by using all the cell charac-teristics, without breaking the rules limitations, higher energy and power densities could have been achieved. An updated battery pack was then designed, produced and raced with at Motostudent 2018 re-sulting in a third place at debut. The second topic of this PhD was the design of novel inverter topologies. Three inverters have been de-signed, two of them using Gallium Nitride devices, a promising semiconductor technology that can achieve high switching speeds while maintaining low switching losses. High switching frequency is crucial to reduce the DC-Bus capacitor and then increase the power density of 3 phase inverters. The third in-verter uses classic Silicon devices but employs a ZVS (Zero Voltage Switching) topology. Despite the in-creased complexity of both the hardware and the control software, it can offer reduced switching losses by using conventional and established silicon mosfet technology. Finally, the mechanical parts of a three phase permanent magnet motor have been designed with the aim to employ it in UniBo Motorsport’s 2020 Formula Student car.

Peptidomimetic ligands for tuning integrin-mediated signalling: rational design, synthesis and theranostic applications

Integrins are α/β-heterodimeric transmembrane adhesion receptors that mediate cell-cell and cell-ECM interactions. Integrins are bidirectional signalling receptors that respond to external signals (“outside-in” signalling) and in parallel, transduce internal signals to the matrix (“inside-out” signalling), to regulate vital cellular functions including migration, survival, growth and differentiation. Therefore, dysregulation of these tightly regulated processes often results in uncontrolled integrin activation and abnormal tissue expression that is responsible for many diseases. Because of their important roles in physiological and pathological events, they represent a validated target for therapeutic and diagnostic purposes. The aim of the present Thesis was focused on the development of peptidic ligands for α4β1 and αvβ3 integrin subtypes, involved in inflammatory responses (leukocytes recruitment and extravasation) and cancer progression (angiogenesis, tumor growth, metastasis), respectively. Following the peptidomimetic strategy, we designed and synthesized a small library of linear and cyclic hybrid α/β-peptidomimetics based on the phenylureido-LDV scaffolds for the treatment of chronic inflammatory autoimmune diseases. In order to implement a fast and non-invasive diagnostic method for monitoring the course of the inflammatory processes, a flat glass-surface of dye-loaded Zeolite L-crystal nanoparticles was coated with bioactive α4β1-peptidomimetics to detect specific integrin-expressing cells as biomarkers of inflammatory diseases. Targeted drug delivery has been considered a promising alternative to overcome the pharmacokinetic limitations of conventional anticancer drugs. Thus, a novel Small-Molecule Drug Conjugate was synthesized by connecting the highly cytotoxic Cryptophycin to the tumor-targeting RGDfK-peptide through a protease-cleavable linker. Finally, in view to making the peptide synthesis more sustainable and greener, we developed an alternative method for peptide bonds formation employing solvent-free mechanochemistry and ultra-mild minimal solvent-grinding conditions in common, inexpensive laboratory equipment. To this purpose, standard amino acids, coupling agents and organic-green solvents were used in the presence of nanocrystalline hydroxyapatite as a reusable, bio-compatible inorganic basic catalyst.

Design, development, and analysis of hybrid metal-composite tube for industrial application

In the aerospace, automotive, printing, and sports industries, the development of hybrid Carbon Fiber Reinforced Polymer (CFRP)-metal components is becoming increasingly important. The coupling of metal with CFRP in axial symmetric components results in reduced production costs and increased mechanical properties such as bending, torsional stiffness, mass reduction, damping, and critical speed compared to the single material-built ones. In this thesis, thanks to a novel methodology involving a rubbery/viscoelastic interface layer, several hybrid aluminum-CFRP prototype tubes were produced. Besides, an innovative system for the cure of the CFRP part has been studied, analyzed, tested, and developed in the company that financed these research activities (Reglass SRL, Minerbio BO, Italy). The residual thermal stresses and strains have been investigated with numerical models based on the Finite Element Method (FEM) and compared with experimental tests. Thanks to numerical models, it was also possible to reduce residual thermal stresses by optimizing the lamination sequence of CFRP and determining the influence of the system parameters. A novel software and methodology for evaluating mechanical and damping properties of specimens and tubes made in CFRP were also developed. Moreover, to increase the component's damping properties, rubber nanofibers have been produced and interposed throughout the lamination of specimens. The promising results indicated that the nanofibrous mat could improve the material damping factor over 77% and be adopted in CFRP components with a negligible increment of weight or losing mechanical properties.