Measurement of the production cross section for pairs of isolated photons in pp collisions at root s=7 TeV

The integrated and differential cross sections for the production of pairs of isolated photons is measured in proton-proton collisions at a centre-of-mass energy of 7TeV with the CMS detector at the LHC. A data sample corresponding to an integrated luminosity of 36 pb(-1) is analysed. A next-to-leading-order perturbative QCD calculation is compared to the measurements. A discrepancy is observed for regions of the phase space where the two photons have an azimuthal angle difference Delta phi less than or similar to 2.8 rad.

Dynamics of two satellites in the 2/1 Mean-Motion resonance: application to the case of Enceladus and Dione

The dynamics of a pair of satellites similar to Enceladus-Dione is investigated with a two-degrees-of-freedom model written in the domain of the planar general three-body problem. Using surfaces of section and spectral analysis methods, we study the phase space of the system in terms of several parameters, including the most recent data. A detailed study of the main possible regimes of motion is presented, and in particular we show that, besides the two separated resonances, the phase space is replete of secondary resonances.

Dynamics of two planets in the 3/2 mean-motion resonance: Application to the planetary system of the pulsar PSR B1257+12

This paper considers the dynamics of two planets, as the planets B and C of the pulsar PSR B1257+12, near a 3/2 mean-motion resonance. A two-degrees-of-freedom model, in the framework of the general three-body planar problem, is used and the solutions are analyzed through surfaces of section and Fourier techniques in the full phase space of the system.

TAXONOMY, ONTOGENY and PALEOECOLOGY of TWO SPECIES of HARBINIA TSAO, 1959 (CRUSTACEA, OSTRACODA) FROM THE SANTANA FORMATION, LOWER CRETACEOUS, NORTHEASTERN BRAZIL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioactive Metabolites Produced by Penicillium sp.1 and sp.2, Two Endophytes Associated with Alibertia macrophylla (Rubiaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE SECTION SIRODOTIA OF BATRACHOSPERMUM (RHODOPHYTA, BATRACHOSPERMACEAE) IN BRAZIL

The taxonomy, distribution and ecology of Section Sirodotia of Batrachospermum in Brazil is studied. Only one species, B. delicatulum (SKUJA) NECCHI & ENTWISLE, was recognized. This species presents a wide range of morphological features, occurs in a number of distinct habitats and environmental conditions and is widely distributed in Brazil. A full account of the species taxonomy is given and the synonyMy of B. ateleium comb. nov. SKUJA is confirmed. Two growth forms (dense and open) were found in the Brazilian specimens, but they were not treated as different taxa because a continuous range was observed between them. Two morphological features were proposed for species delineation: early development of gonimoblast and presence of specialized spermatangial branches. Three distinct groups of Sirodotia species can be recognized on the basis of these criterions: B. delicatulum (gonimoblast initial arises from a semiglobular protuberance of the carpogonium), B. suecicalum KYLIN (gonimoblast initial arises from the non-protuberant side of the carpogonium) and B. segawae KUMANO and B. yutakae KUMANO (with specialized spermatangial branches).

Genetic variation within and among species of genus Arachis, section Rhizomatosae

The genus Arachis is endemic to South America and comprises 80 species, 69 of which have already been described and eleven not yet published. The genus includes the cultivated peanut ( A. hypogaea) and several forage species, the most important ones being A. glabrata and A. pintoi. Accessions of section Rhizomatosae, including three tetraploid species 2n = 4x = 40 (A. glabrata, A. pseudovillosa and A. nitida nom. nud.) and one diploid species 2n = 2x = 20 (A. burkartii), were evaluated using RAPD markers to assay genetic variability within and among species. The ten random primers used yielded a total of 113 polymorphic bands. The data were scored as the presence or absence of each band in each sample. A distance matrix and dendrogram were obtained using Link's coefficient and the neighbor-joining method. Most accessions analyzed grouped into two major clusters: the first comprised most accessions of A. glabrata and accessions of A. nitida, and the second cluster comprised accessions of A. burkartii. Arachis pseudovillosa and a few accessions of A. glabrata and A. nitida were placed between these major clusters. The diploid and tetraploid species were grouped quite separately, suggesting that the tetraploids did not originate from the diploid species analyzed.

Two-matrix string model as constrained (2+1)-dimensional integrable system

We show that the 2-matrix string model corresponds to a coupled system of 2 + 1-dimensional KP and modified KP ((m)KP2+1) integrable equations subject to a specific symmetry constraint. The latter together with the Miura-Konopelchenko map for (m)KP2+1 are the continuum incarnation of the matrix string equation. The (m)KP2+1 Miura and Backhand transformations are natural consequences of the underlying lattice structure. The constrained (m)KP2+1 system is equivalent to a 1 + 1-dimensional generalized KP-KdV hierarchy related to graded SL(3,1). We provide an explicit representation of this hierarchy, including the associated W(2,1)-algebra of the second Hamiltonian structure, in terms of free currents.

Are two gluons the QCD Pomeron?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Are two gluons the QCD pomeron?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Two-dimensional integrable generalization of the Camassa-Holm equation

In this letter we discuss the (2 + 1)-dimensional generalization of the Camassa-Holm equation. We require that this generalization be, at the same time, integrable and physically derivable under the same asymptotic analysis as the original Camassa-Holm equation. First, we find the equation in a perturbative calculation in shallow-water theory. We then demonstrate its integrability and find several particular solutions describing (2 + 1) solitary-wave like solutions. © 1999 Published by Elsevier Science B.V. All rights reserved.

Genetic variation and phylogenetic relationships based on RAPD analysis in section Caulorrhizae, genus Arachis (Leguminosae)

Wild Arachis germplasm includes potential forage species, such as the rhizomatous Arachis glabrata and the stoloniferous A. pinto and A. repens. Commercial cultivars of A. pintoi have already been released in Australia and in several Latin American countries, and most of these cultivars were derived from a single accession of A. pintoi (GK 12787). Arachis repens is less productive as a forage plant than is A. pintoi. However, it can be crossed with A. pintoi, and thus has good potential as germplasm for the improvement of A. pintoi. Arachis repens is also used as an ornamental plant and ground cover. Many new accessions of these two stoloniferous species are now available, and they harbor significant genetic variability beyond that available in the few older accessions, previously available. Therefore, these new accessions need to be conserved, documented and considered in terms of their potential for crop improvement and direct commercial use. Sixty-four accessions of this new germplasm were analyzed using RAPD analysis. Most of the accessions of A. repens grouped together into a clearly distinct group. In general, the accessions from the distinct valleys of the Jequitinhonha, Sao Francisco and Parana rivers did not group together, suggesting there is not a tight relation between dispersion by rivers and the geographic distribution of genetic variation in these species.

Measurement of the tt̄ production cross section in pp̄ collisions at √s = 1.96 TeV in dilepton final states

We present a measurement of the top quark pair (tt̄) production cross section in pp̄ collisions at √s=1.96 TeV using events with two charged leptons in the final state. This analysis utilizes an integrated luminosity of 224-243 pb-1 collected with the DØ detector at the Fermilab Tevatron Collider. We observe 13 events in the e+e -, eμ and μ+μ- channels with an expected background of 3.2±0.7 events. For a top quark mass of 175 GeV, we measure a tt̄ production cross section of σtt̄=8. 6-2.7 +3.2(stat)±1.1(syst)±0.6(lumi) pb, consistent with the standard model prediction. © 2005 Elsevier B.V. All rights reserved.

Effect of microwave disinfection procedures on torsional bond strengths of two hard chairside denture reline materials

Purpose: This study evaluated the potential effects of denture base resin water storage time and an effective denture disinfection method (microwave irradiation at 650 W for 6 minutes) on the torsional bond strength between two hard chairside reline resins (GC Reline and New Truliner) and one heat-polymerizing denture base acrylic resin (Lucitone 199). Materials and Methods: Cylindrical (30 x 3.9 mm) denture base specimens (n = 160) were stored in water at 37°C (2 or 30 days) before bonding. A section (3.0 mm) was removed from the center of the specimens, surfaces prepared, and the reline materials packed into the space. After polymerization, specimens were divided into four groups (n = 10): Group 1 (G1) - tests performed after bonding; Group 2 (G2) - specimens immersed in water (200 ml) and irradiated twice (650 W for 6 minutes); Group 3 (G3) - specimens irradiated daily until seven cycles of disinfection; Group 4 (G4) - specimens immersed in water (37°C) for 7 days. Specimens were submitted to a torsional test (0.1 Nm/min), and the torsional strengths (MPa) and the mode of failure were recorded. Data from each reline material were analyzed by a two-way analysis of variance, followed by Neuman-Keuls test (p = 0.05). Results: For both Lucitone 199 water storage periods, before bonding to GC Reline resin, the mean torsional strengths of G2 (2 days - 138 MPa; 30 days - 132 MPa), G3 (2 days - 126 MPa; 30 days - 130 MPa), and G4 (2 days - 130 MPa; 30 days - 137 MPa) were significantly higher (p < 0.05) than G1 (2 days - 108 MPa; 30 days - 115 MPa). Similar results were found for Lucitone 199 specimens bonded to New Truliner resin, with G1 specimens (2 days - 73 MPa; 30 days - 71 MPa) exhibiting significantly lower mean torsional bond strength (p < 0.05) than G2 (2 day - 86 MPa; 30 days - 90 MPa), G3 (2 days - 82 MPa; 30 days - 82 MPa), and G4 specimens (2 days - 78 MPa; 30 days - 79 MPa). The adhesion of both materials was not affected by water storage time of Lucitone 199 (p > 0.05). GC reline showed a mixed mode of failure (adhesive/cohesive) and New Truliner failed adhesively. Conclusions: Up to seven microwave disinfection cycles did not decrease the torsional bond strengths between the hard reline resins, GC Reline and New Truliner to the denture base resin Lucitone 199. The effect of additional disinfection cycles on reline material may be clinically significant and requires further study. Copyright © 2006 by The American College of Prosthodontists.

Measurement of the single-top-quark t-channel cross section in pp collisions at √s=7 TeV

A measurement of the single-top-quark t-channel production cross section in pp collisions at √s=7 TeV with the CMS detector at the LHC is presented. Two different and complementary approaches have been followed. The first approach exploits the distributions of the pseudorapidity of the recoil jet and reconstructed top-quark mass using background estimates determined from control samples in data. The second approach is based on multivariate analysis techniques that probe the compatibility of the candidate events with the signal. Data have been collected for the muon and electron final states, corresponding to integrated luminosities of 1.17 and 1.56 fb-1, respectively. The single-top-quark production cross section in the t-channel is measured to be 67.2±6.1 pb, in agreement with the approximate next-to-next-to-leading- order standard model prediction. Using the standard model electroweak couplings, the CKM matrix element |V tb| is measured to be 1.020 ± 0.046 (meas.) ± 0.017 (theor.). © 2012 CERN for the benefit of the CMS collaboration.