Diseño y aplicación de una metodología prospectiva para la determinación de los condicionantes futuros del crecimiento de los grandes buques portacontenedores

Durante las últimas décadas se observa una tendencia sostenida al crecimiento en las dimensiones de los grandes buques portacontenedores, que produce, que las infraestructuras portuarias y otras destinadas al tráfico de contenedores deban adaptarse para poder brindar los servicios correspondientes y mantenerse competitivas con otras para no perder el mercado. Esta situación implica importantes inversiones y modificaciones en los sistemas de transporte de contenedores por el gran volumen de carga que se debe mover en un corto periodo de tiempo, lo que genera la necesidad de tomar previsiones relacionadas con la probable evolución a futuro de las dimensiones que alcanzarán los grandes buques portacontenedores. En relación a los aspectos citados surge la inquietud de determinar los condicionantes futuros del crecimiento de los grandes buques portacontenedores, con una visión totalizadora de todos los factores que incidirán en los próximos años, ya sea como un freno o un impulso a la tendencia que se verifica en el pasado y en el presente. En consideración a que el tema a tratar y resolver se encuentra en el futuro, con un horizonte de predicción de veinte años, se diseña y se aplica una metodología prospectiva, que permite alcanzar conclusiones con mayor grado de objetividad sobre probables escenarios futuros. La metodología prospectiva diseñada, conjuga distintas herramientas metodológicas, cualitativas, semi-cuantitativas y cuantitativas que se validan entre sí. Sobre la base del pasado y el presente, las herramientas cuantitativas permiten encontrar relaciones entre variables y hacer proyecciones, sin embargo, estas metodologías pierden validez más allá de los tres a cuatro años, por los vertiginosos y dinámicos cambios que se producen actualmente, en las áreas política, social y económica. Las metodologías semi-cuantitativas y cualitativas, empleadas en forma conjunta e integradas, permiten el análisis de circunstancias del pasado y del presente, obteniendo resultados cuantitativos que se pueden proyectar hacia un futuro cercano, los que integrados en estudios cualitativos proporcionan resultados a largo plazo, facilitando considerar variables cualitativas como la creciente preocupación por la preservación del medio ambiente y la piratería. La presente tesis, tiene como objetivo principal “identificar los condicionantes futuros del crecimiento de los grandes buques portacontenedores y determinar sus escenarios”. Para lo cual, la misma se estructura en fases consecutivas y que se retroalimentan continuamente. Las tres primeras fases son un enfoque sobre el pasado y el presente, que establece el problema a resolver. Se estudian los antecedentes y el estado del conocimiento en relación a los factores y circunstancias que motivaron y facilitaron la tendencia al crecimiento de los grandes buques. También se estudia el estado del conocimiento de las metodologías para predecir el futuro y se diseña de una metodología prospectiva. La cuarta fase, denominada Resultados, se desarrolla en distintas etapas, fundamentadas en las fases anteriores, con el fin de resolver el problema dando respuestas a las preguntas que se formularon para alcanzar el objetivo fijado. En el proceso de esta fase, con el objeto de predecir probables futuros, se aplica la metodología prospectiva diseñada, que contempla el análisis del pasado y el presente, que determina los factores cuya influencia provocó el crecimiento en dimensiones de los grandes buques hasta la actualidad, y que constituye la base para emplear los métodos prospectivos que permiten determinar qué factores condicionarán en el futuro la evolución de los grandes buques. El probable escenario futuro formado por los factores determinados por el criterio experto, es validado mediante un modelo cuantitativo dinámico, que además de obtener el probable escenario futuro basado en las tendencias de comportamiento hasta el presente de los factores determinantes considerados, permite estudiar distintos probables escenarios futuros en función de considerar un cambio en la tendencia futura de los factores determinantes. El análisis del pasado indica que la tendencia al crecimiento de los grandes buques portacontenedores hasta el presente, se ha motivado por un crecimiento económico mundial que se tradujo en un aumento del comercio internacional, particularmente entre los países de Asia, con Europa y Estados Unidos. Esta tendencia se ha visto favorecida por el factor globalización y la acelerada evolución tecnológica que ha permitido superar los obstáculos que se presentaron. Es de destacar que aún en periodos de crisis económicas, con pronósticos de contracciones en el comercio, en los últimos años continuó la tendencia al crecimiento en dimensiones, en busca de una economía de escala para el transporte marítimo de contenedores, en las rutas transoceánicas. La investigación de la evolución de los grandes buques portacontenedores en el futuro, se efectúa mediante el empleo de una metodología prospectiva en la que el criterio experto se valida con un método cuantitativo dinámico, y además se fundamenta en una solida base pre-prospectiva. La metodología diseñada permite evaluar con un alto grado de objetividad cuales serán los condicionantes que incidirán en el crecimiento en tamaño de los grandes buques portacontenedores en el escenario con mayor probabilidad de acontecer en los próximos veinte años (2032), y también en otros escenarios que podrían presentarse en el caso de que los factores modifiquen su tendencia o bien se produzcan hechos aleatorios. El resultado se sintetiza en que la tendencia al crecimiento de los grandes buques portacontenedores en los próximos 20 años se verá condicionada por factores en relación a los conceptos de oferta (los que facilitan u obstaculizan la tendencia), demanda (los que motivan o impulsan la tendencia) y factores externos (los que desestabilizan el equilibrio entre oferta y demanda). La tendencia al crecimiento de los grandes buques portacontenedores se verá obstaculizada / limitada principalmente por factores relacionados a las infraestructuras, resultando los pasos y/o canales vinculados a las rutas marítimas, los limitantes futuros al crecimiento en dimensiones de los grandes buques portacontenedores; y la interacción buque / infraestructura (grúas) un factor que tenderá a obstaculizar esta tendencia de los grandes portacontenedores. El desarrollo económico mundial que estimula el comercio internacional y los factores precio del petróleo y condicionantes medioambientales impulsarán la tendencia al crecimiento de los grandes buques portacontenedores. Recent years have seen a sustained tendency towards the growth in the dimensions of large container ships. This has meant that port and other infrastructure used for container traffic has had to be adapted in order to provide the required services and to maintain a competitive position, so as not to lose market share. This situation implies the need for major investments in modifications to the container transport system, on account of the large volume of traffic to be handled in a short period of time. This in turn has generated a need to make provision for the probable future evolution of the ultimate dimensions that will be reached by large container ships. Such considerations give rise to the question of what are the future determinants for the growth of large container ships, requiring an overall vision of all the factors that will apply in future years, whether as a brake on or an incentive to the growth tendency which has been seen in the past and present In view of the fact that the theme to be dealt with and resolved relates to the future, with a forecasting horizon of some 20 years, a foresight methodology has been designed and applied so as to enable conclusions about probable future scenarios to be reached with a greater degree of objectivity. The designed methodology contains different methodological tools, both qualitative, semi-quantitative and quantitative, which are internally consistent. On the basis of past and present observations, the quantitative elements enable relationships to be established and forecasts to be made. Nevertheless such an approach loses validity more than three or four years into the future, on account of the very rapid and dynamic changes which may be seen at present in political, social and economic spheres. The semi-quantitative and qualitative methodologies are used coherently together and allow the analysis of past and present conditions, thus obtaining quantitative results which for short-term projections, which when integrated with the qualitative studies provide results for the long-term, facilitating the consideration of qualitative variables such as the increasing importance of environmental protection and the impact of piracy. The principal objective of the present thesis is "to identify the future conditions affecting the growth of large container ships and to determine possible scenarios". The thesis is structured in consecutive and related phases. The first three phases focus on the past and present in order to determine the problem to be resolved. The background is studied in order to establish the state of knowledge about the factors and circumstances which have motivated and facilitated the growth tendency for large container ships and the methodologies that have been used. In this way a specific foresight methodology is designed. The fourth phase, Results, is developed in distinct stages based on the previous phases, so as to resolve the problem posed and responding to the questions that arise. In this way the determined objective is reached. The fourth phase sees the application of the methodology that has been designed in order to predict posible futures. This includes analysis of the past and present factors which have caused the growth in the dimensions of large container ships up to the present. These provide the basis on which to apply the foresight methods which enable the future factors which will condition the development of such large container ships. The probable future scenarios are made up of the factors identified by expert judgement (using the Delphi technique) and validated by means of a dynamic quantitative model. This model both identifies the probable future scenarios based on past and present factors and enables the different future scenarios to be analysed as a function of future changes in the conditioning factors. Analysis of the past shows that the growth tendency up to the present for large container ships has been motivated by the growth of the world economy and the consequent increased international trade, especially between the countries of Asia with Europe and the United States. This tendency has been favoured by the trend towards globalization and by the rapid technical evolution in ship design, which has allowed the obstacles encountered to be overcome. It should be noted that even in periods of economic crisis, with an expectation for reduced trade, as experienced in recent years, the tendency towards increased ship dimensions has continued in search of economies of scale for the maritime transport of containers on transoceanic routes. The present investigation of the future evolution of large container ships has been done using a foresight methodology in which the expert judgement is validated by a dynamic quantitative methodology, founded on a firm pre-foresight analysis. The methodology that has been designed permits the evaluation, with a high degree of objectivity, of the future factors that will affect the growth of large container ships for the most probable scenario expected in the next 20 years (up to 2032). The evaluation applies also to other scenarios which may arise, in the event that their component factors are modified or indeed in the light of random events. In summary, the conclusión is that the tendency for growth in large container ships in the future 20 years will be determined by: factors related to supply, which slow or halt the tendency; factors related to demand, which encourage the tendency and finally, external factors which interrupt the equilibrium between supply and demand. The tendency for increasing growth in large container ships will be limited or even halted by factors related to infrastructure, including the natural and man-made straits and canals used by maritime transport. In addition the infrastructure required to serve such vessels both in port (including cranes and other equipment) and related transport, will tend to slow the growth tendency. The factors which will continue to encourage the tendency towards the growth of large container ships include world economic development, which stimulates international trade, and an increasing emphasis on environmental aspects.

Vista general del modelado del sistema auditivo

El objetivo principal del presente proyecto es proporcionar al ingeniero de telecomunicaciones una visión general de las técnicas que se utilizan en el modelado del sistema auditivo. El modelado del sistema auditivo se realiza con los siguientes objetivos: a) Interpretar medidas directas, b)unificar el entendimiento de diferentes fenómenos, c) guiar estrategias de amplificación para suplir pérdidas auditivas y d) tener predicciones experimentalmente comprobables de comportamientos, con diferentes niveles de complejidad. En este trabajo se tratarán y explicarán brevemente las diferentes técnicas utilizadas para modelar las partes del sistema auditivo, desde las analogías electroacústicas, modelos biofísicos, binaurales, hasta la implementación de filtros auditivos mediante procesado de señal. Podemos concluir que el modelado mediante analogías electroacústicas permite una rápida implementación y entendimiento, pero tiene ciertas limitaciones. Las simulaciones mediante análisis numéricos son precisas y de gran utilidad tanto para del oído medio como para el interno. El procesado de señal es el procedimiento más completo y utilizado ya que permite modelar oído externo y medio además de permitir la implementación de filtros cocleares muy precisos y coherentes con la realidad incluyéndolos en modelos perceptivos. ABSTRACT. The main aim of the Project is to provide the Telecommunications Engineer an overview about the approaches for modelling the auditory system. The auditory system modelling is done for the next objectives: a) Interpret direct measures, b) Understand different phenomena c) get strategies of amplification for hearing impaired people and d) Obtain testable predictions experimentally about some behaviors with different complexity levels. Inside this document, several approaches about modeling of the auditory system parts will be explained: analog circuits, biophysics models, binaural models, and auditory filters made through signal processing. In conclusion, analog circuits are made quickly and they are easier to understand but they have many limitations. Simulations through numerical analysis are accurate and useful in middle and inner ear models. Signal processing is the more versatile approach because it lets to make a model of external and middle ear and then it allows to make complex auditory filters. Perceptive models can be made entirely through this method.

Integration of congestion pricing and intertemporal preference rate in social welfare function

Assessing social benefits in transport policy implementation has been studied by many researchers using theoretical or empirical measures. However, few of them measure social benefit using different discount rates including the inter-temporal preferences rate of users, the private investment discount rate and the inter-temporal preferences rate of the government. In general, the social discount rate used is the same for all social actors. Therefore, this paper aims to assess a new method by integrating different types of discount rate belonging to different social actors in order to measure the real benefits of each actor in the short, medium and long term. A dynamic simulation is provided by a strategic Land-Use and Transport Interaction (LUTI) model. The method is tested by optimizing a cordon toll scheme in Madrid considering socio- economic efficiency and environmental criteria. Based on the modified social welfare function (WF), the effects on the measure of social benefits are estimated and compared with the classical WF results as well. The results of this research could be a key issue to understanding the relationship between transport system policies and social actors' benefits distribution in a metropolitan context. The results show that the use of more suitable discount rates for each social actor had an effect on the selection and definition of optimal strategy of congestion pricing. The usefulness of the measure of congestion toll declines more quickly overtime.

Integration of congestion pricing and intertemporal preferences rate integration in social welfare function

Many researchers have used theoretical or empirical measures to assess social benefits in transport policy implementation. However, few have measured social benefits by using discount rates, including the intertemporal preference rate of users, the private investment discount rate, and the intertemporal preference rate of the government. In general, the social discount rate used is the same for all social actors. This paper aims to assess a new method by integrating different types of discount rates belonging to different social actors to measure the real benefits of each actor in the short term, medium term, and long term. A dynamic simulation is provided by a strategic land use and transport interaction model. The method was tested by optimizing a cordon toll scheme in Madrid, Spain. Socioeconomic efficiency and environmental criteria were considered. On the basis of the modified social welfare function, the effects on the measure of social benefits were estimated and compared with the classical welfare function measures. The results show that the use of more suitable discount rates for each social actor had an effect on the selection and definition of optimal strategy of congestion pricing. The usefulness of the measure of congestion toll declines more quickly over time. This result could be the key to understanding the relationship between transport system policies and the distribution of social actors? benefits in a metropolitan context.

Neighborhood mobility: A Long-Gone Pardigm? Approaching proximity and land use mix using data from home based surveys.

El WCTR es un congreso de reconocido prestigio internacional en el ámbito de la investigación del transporte y aunque las actas publicadas están en formato digital y sin ISSN ni ISBN, lo consideramos lo suficientemente importante como para que se considere en los indicadores. Policies trying to increase walking within urban mobility modal split usually highlight the importance of the functional patterns and the environmental quality of the urban space as major drivers of citizens modal choices. Functional characteristics would be mainly associated to an appropriate mix of land uses within neighbourhoods, whereas environmental quality would be associated to the characteristics of urban spaces. The purpose of this research is threefold: first, to identify relevant proxy indicators, which could characterize pedestrian-friendly land use mix and environmental quality. Second, to assess, for both traits, existing disparities among neighbourhoods in a major metropolitan area. And finally, to explore the association between both indicators and children mobility patterns: according to their built environment, which neighbourhoods have a greater proportion of children and, how is their mobility? Using data from the 2004 household mobility survey in the 128 neighbourhoods of the municipality of Madrid, this paper concludes that potentially favourable conditions at the neighbourhood level seem to have only a modest influence in,mobility patterns , in terms of both, selection of closer destinations and a higher share of walking within modal split. The citys policy choices, with intensive investment in road and public transport infrastructure may explain why short-distance mobility is not as important as it could have been expected in those neighbourhoods with more pedestrian-friendly conditions. The metropolitan transport system is providing mobility conditions, which make far-away destinations attractive to most citizens.

Estudio técnico-económico del criterio distancia foco emisor y estructura almacén de CO2. Aplicación a un caso de estudio en la Cuenca del Duero.

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view.

Estudio técnico-económico del criterio distancia entre fuente y almacén de CO2 Recurso electrónico : Aplicación a caso de estudio en la cuenca del Duero

El presente proyecto tiene como objeto la evaluación del parámetro distancia entre focos de emisión de CO2 y estructuras geológicas apropiadas para su almacenamiento, según los datos publicados por el Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) y por el proyecto ALGECO2. El parámetro distancia analizado es referido a proyectos de Captura, Transporte y Almacenamiento de CO2 (proyectos CAC) a gran escala. Para ello se ha realizado un estudio en la zona de la Cuenca del Duero aplicando criterios de selección tanto técnicos como socio-económicos, según las recomendaciones de organizaciones como la Agencia Internacional de la Energía o el CCS Institute entre otros. A lo largo de este estudio se ha propuesto y evaluado un sistema de transporte por tubería “punto a punto” o un sistema en “red” determinando cuáles son los más recomendables para un futuro trazado de las líneas de transporte desde un punto de vista sostenible. Abstract This present project’s objective is to evaluate the distance parameter among several CO2 sources and adequate geological structures for storage, following the released data by the Registro Estatal de Emisiones y Fuentes Contaminantes (PRTR España) and the ALGECO2 project. The analysed distance parameter is applied to large-scale Carbon Captures and Storage (CCS) projects. For this study, a research has been carried out in the Cuenca del Duero area, utilizing selective criteria as technical as socio-economic, according to recommendations made by organizations such as International Energy Agency and CCS Institute among others. During this research it has been proposed and evaluated a “point to point” pipeline transport system or a “network” transport system, aiming to find the most effective future route selection of the transportation lines from a sustainable point of view

Neighbourhood mobility: a longgone Paradigm? Approaching "proximity" and "land use mix" using data from home-based surveys

Policies trying to increase walking within urban mobility modal split usually highlight the importance of the functional patterns and the environmental quality of the urban space as major drivers of citizens modal choices. Functional characteristics would be mainly associated to an appropriate mix of land uses within neighbourhoods, whereas environmental quality would be associated to the characteristics of urban spaces. The purpose of this research is threefold: first, to identify relevant proxy indicators, which could characterize pedestrian-friendly land use mix and environmental quality. Second, to assess, for both traits, existing disparities among neighbourhoods in a major metropolitan area. And finally, to explore the association between both indicators and children mobility patterns: according to their built environment, which neighbourhoods have a greater proportion of children and, how is their mobility? Using data from the 2004 household mobility survey in the 128 neighbourhoods of the municipality of Madrid, this paper concludes that potentially favourable conditions at the neighbourhood level seem to have only a modest influence in,mobility patterns , in terms of both, selection of closer destinations and a higher share of walking within modal split. The city s policy choices, with intensive investment in road and public transport infrastructure may explain why short-distance mobility is not as important as it could have been expected in those neighbourhoods with more pedestrian-friendly conditions. The metropolitan transport system is providing mobility conditions, which make far-away destinations attractive to most citizens.

A Semantic Approach to Problem-Based Learning with Conceptual Models

El aprendizaje basado en problemas se lleva aplicando con éxito durante las últimas tres décadas en un amplio rango de entornos de aprendizaje. Este enfoque educacional consiste en proponer problemas a los estudiantes de forma que puedan aprender sobre un dominio particular mediante el desarrollo de soluciones a dichos problemas. Si esto se aplica al modelado de conocimiento, y en particular al basado en Razonamiento Cualitativo, las soluciones a los problemas pasan a ser modelos que representan el compotamiento del sistema dinámico propuesto. Por lo tanto, la tarea del estudiante en este caso es acercar su modelo inicial (su primer intento de representar el sistema) a los modelos objetivo que proporcionan soluciones al problema, a la vez que adquieren conocimiento sobre el dominio durante el proceso. En esta tesis proponemos KaiSem, un método que usa tecnologías y recursos semánticos para guiar a los estudiantes durante el proceso de modelado, ayudándoles a adquirir tanto conocimiento como sea posible sin la directa supervisión de un profesor. Dado que tanto estudiantes como profesores crean sus modelos de forma independiente, estos tendrán diferentes terminologías y estructuras, dando lugar a un conjunto de modelos altamente heterogéneo. Para lidiar con tal heterogeneidad, proporcionamos una técnica de anclaje semántico para determinar, de forma automática, enlaces entre la terminología libre usada por los estudiantes y algunos vocabularios disponibles en la Web de Datos, facilitando con ello la interoperabilidad y posterior alineación de modelos. Por último, proporcionamos una técnica de feedback semántico para comparar los modelos ya alineados y generar feedback basado en las posibles discrepancias entre ellos. Este feedback es comunicado en forma de sugerencias individualizadas que el estudiante puede utilizar para acercar su modelo a los modelos objetivos en cuanto a su terminología y estructura se refiere. ABSTRACT Problem-based learning has been successfully applied over the last three decades to a diverse range of learning environments. This educational approach consists of posing problems to learners, so they can learn about a particular domain by developing solutions to them. When applied to conceptual modeling, and particularly to Qualitative Reasoning, the solutions to problems are models that represent the behavior of a dynamic system. Therefore, the learner's task is to move from their initial model, as their first attempt to represent the system, to the target models that provide solutions to that problem while acquiring domain knowledge in the process. In this thesis we propose KaiSem, a method for using semantic technologies and resources to scaffold the modeling process, helping the learners to acquire as much domain knowledge as possible without direct supervision from the teacher. Since learners and experts create their models independently, these will have different terminologies and structure, giving rise to a pool of models highly heterogeneous. To deal with such heterogeneity, we provide a semantic grounding technique to automatically determine links between the unrestricted terminology used by learners and some online vocabularies of the Web of Data, thus facilitating the interoperability and later alignment of the models. Lastly, we provide a semantic-based feedback technique to compare the aligned models and generate feedback based on the possible discrepancies. This feedback is communicated in the form of individualized suggestions, which can be used by the learner to bring their model closer in terminology and structure to the target models.

La Península Ibérica en el transporte masivo de mercancías entre Europa y África : futuras autopistas del mar

La competitividad del transporte de mercancías depende del estado y funcionamiento de las redes existentes y de sus infraestructuras, no del modo de transporte. En concreto, la rentabilidad o la reducción de los costes de producción del transporte marítimo se vería incrementado con el uso de buques de mayor capacidad y con el desarrollo de plataformas portuarias de distribución o puertos secos, ya que el 90% del comercio entre la Unión Europea y terceros países se realiza a través de sus puertos a un promedio de 3,2 billones de toneladas de mercancías manipuladas cada año y el 40% del tráfico intraeuropeo utiliza el transporte marítimo de corta distancia. A pesar de que los puertos europeos acogen anualmente a más de 400 millones de pasajeros, los grandes desarrollos se han producido en los puertos del norte de Europa (Róterdam, Amberes, Ámsterdam). Los países del Sur de Europa deben buscar nuevas fórmulas para ser más competitivos, ya sea mediante creación de nuevas infraestructuras o mediante refuerzo de las existentes, ofreciendo los costes de los puertos del Norte. El fomento del transporte marítimo y fluvial como alternativa al transporte por carretera, especialmente el transporte marítimo de corta distancia, ha sido impulsado por la Comisión Europea (CE) desde 2003 a través de programas de apoyo comunitario de aplicación directa a las Autopistas del Mar, a modo de ejemplo, cabría citar los programas Marco Polo I y II, los cuales contaron con una dotación presupuestaria total de 855 millones de euros para el período 2003 – 2013; en ese período de tiempo se establecieron objetivos de reducción de congestión vial y mejora del comportamiento medio ambiental del sistema de transporte de mercancías dentro de la comunidad y la potenciación de la intermodalidad. El concepto de Autopista del Mar surge en el Libro Blanco de Transportes de la Comisión Europea “La política europea de transportes de cara al 2010: La hora de la verdad” del 12 de diciembre de 2001, en el marco de una política europea para fomento y desarrollo de sistemas de transportes sostenibles. Las Autopistas del Mar consisten en rutas marítimas de corta distancia entre dos puntos, de menor distancia que por vía terrestre, en las que a través del transporte intermodal mejoran significativamente los tiempos y costes de la cadena logística, contribuyen a la reducción de accidentes, ruidos y emisiones de CO2 a la atmósfera, permite que los conductores pierdan horas de trabajo al volante y evita el deterioro de las infraestructuras terrestres, con el consiguiente ahorro en mantenimiento. La viabilidad de una Autopista del Mar depende tanto de factores de ubicación geográficos, como de características propias del puerto, pasando por los diferentes requerimientos del mercado en cada momento (energéticos, medio ambientales y tecnológicos). Existe un elemento nuevo creado por la Comisión Europea: la red transeuropea de transportes (RTE-T). En el caso de España, con sus dos accesos por los Pirineos (La Junquera e Irún) como únicos pasos terrestres de comunicación con el continente y con importantes limitaciones ferroviarias debido a los tres anchos de vía distintos, le resta competitividad frente al conjunto europeo; por el contrario, España es el país europeo con más kilómetros de costa (con más de 8.000 km) y con un emplazamiento geográfico estratégico, lo que le convierte en una plataforma logística para todo el sur de Europa, por lo que las Autopistas del Mar tendrán un papel importante y casi obligado para el desarrollo de los grandes corredores marítimos que promueve Europa. De hecho, Gijón y Vigo lo han hecho muy bien con sus respectivas líneas definidas como Autopistas del Mar y que conectan con el puerto francés de Nantes-Saint Nazaire, ya que desde ahí los camiones pueden coger rutas hacia el Norte. Paralelamente, la Unión Europea ha iniciado los pasos para el impulso de la primera Autopista del Mar que conectará España con el mercado de Reino Unido, concretamente los Puertos de Bilbao y Tilbury. Además, España e Italia sellaron un acuerdo internacional para desarrollar Autopistas del Mar entre ambos países, comprometiéndose a impulsar una docena de rutas entre puertos del litoral mediterráneo español y el italiano. Actualmente, están en funcionando los trayectos como Barcelona-Génova, Valencia-Civitavecchia y Alicante- Nápoles, notablemente más cortos por mar que por carretera. Bruselas identificó cuatro grandes corredores marítimos que podrían concentrar una alta densidad de tráfico de buques, y en dos de ellos España ya tenía desde un principio un papel crucial. La Comisión diseñó el 14 de abril de 2004, a través del proyecto West-Mos, una red de tráfico marítimo que tiene como vías fundamentales la denominada Autopista del Báltico (que enlaza Europa central y occidental con los países bálticos), la Autopista de Europa suroriental (que une el Adriático con el Jónico y el Mediterráneo más oriental) y también la Autopista de Europa occidental y la Autopista de Europa suroccidental (que enlazan España con Reino Unido y la Francia atlántica y con la Francia mediterránea e Italia, respectivamente). Para poder establecer Autopistas del Mar entre la Península Ibérica y el Norte de Europa primará especialmente la retirada de camiones en la frontera pirenaica, donde el tráfico pesado tiene actualmente una intensidad media diaria de 8.000 unidades, actuando sobre los puntos de mayor congestión, como por ejemplo los Alpes, los Pirineos, el Canal de la Mancha, las carreteras fronterizas de Francia y Euskadi, y proponiendo el traslado de las mercancías en barcos o en trenes. Por su parte, para contar con los subsidios y apoyos europeos las rutas seleccionadas como Autopistas del Mar deben mantener una serie de criterios de calidad relacionados con la frecuencia, coste “plataforma logística a plataforma logística”, simplicidad en procedimientos administrativos y participación de varios países, entre otros. Los estudios consideran inicialmente viables los tramos marítimos superiores a 450 millas, con un volumen de unas 15.000 plataformas al año y que dispongan de eficientes comunicaciones desde el puerto a las redes transeuropeas de autopistas y ferrocarril. Otro objetivo de las Autopistas del Mar es desarrollar las capacidades portuarias de forma que se puedan conectar mejor las regiones periféricas a escala del continente europeo. En lo que a Puertos se refiere, las terminales en los muelles deben contar con una línea de atraque de 250 m., un calado superior a 8 m., una rampa “ro-ro” de doble calzada, grúas portainer, y garantizar operatividad para un mínimo de dos frecuencias de carga semanales. El 28 de marzo de 2011 se publicó el segundo Libro Blanco sobre el futuro del transporte en Europa “Hoja de ruta hacia un espacio único europeo de transporte: por una política de transportes competitiva y sostenible”, donde se definió el marco general de las acciones a emprender en los próximos diez años en el ámbito de las infraestructuras de transporte, la legislación del mercado interior, la reducción de la dependencia del carbono, la tecnología para la gestión del tráfico y los vehículos limpios, así como la estandarización de los distintos mercados. Entre los principales desafíos se encuentran la eliminación de los cuellos de botella y obstáculos diversos de nuestra red europea de transporte, minimizar la dependencia del petróleo, reducir las emisiones de GEI en un 60% para 2050 con respecto a los niveles de 1990 y la inversión en nuevas tecnologías e infraestructuras que reduzcan estas emisiones de transporte en la UE. La conexión entre la UE y el norte de África provoca elevados niveles de congestión en los puntos más críticos del trayecto: frontera hispano-francesa, corredor del Mediterráneo y el paso del estrecho. A esto se le añade el hecho de que el sector del transporte por carretera está sujeto a una creciente competencia de mercado motivada por la eliminación de las barreras europeas, mayores exigencias de los cargadores, mayores restricciones a los conductores y aumento del precio del gasóleo. Por otro lado, el mercado potencial de pasajeros tiene una clara diferenciación en tipos de flujos: los flujos en el período extraordinario de la Operación Paso del Estrecho (OPE), enfocado principalmente a marroquíes que vuelven a su país de vacaciones; y los flujos en el período ordinario, enfocado a la movilidad global de la población. Por tanto, lo que se pretende conseguir con este estudio es analizar la situación actual del tráfico de mercancías y pasajeros con origen o destino la península ibérica y sus causas, así como la investigación de las ventajas de la creación de una conexión marítima (Autopista del Mar) con el Norte de África, basándose en los condicionantes técnicos, administrativos, económicos, políticos, sociales y medio ambientales. The competitiveness of freight transport depends on the condition and operation of existing networks and infrastructure, not the mode of transport. In particular, profitability could be increased or production costs of maritime transport could be reduced by using vessels with greater capacity and developing port distribution platforms or dry ports, seeing as 90% of trade between the European Union and third countries happens through its ports. On average 3,2 billion tonnes of freight are handled annualy and 40% of intra-European traffic uses Short Sea Shipping. In spite of European ports annually hosting more than 400 million passengers, there have been major developments in the northern European ports (Rotterdam, Antwerp, Amsterdam). Southern European countries need to find new ways to be more competitive, either by building new infrastructure or by strengthening existing infrastructure, offering costs northern ports. The use of maritime and river transport as an alternative to road transport, especially Short Sea Shipping, has been driven by the European Commission (EC) from 2003 through community support programs for the Motorways of the Sea. These programs include, for example, the Marco Polo I and II programs, which had a total budget of 855 million euros for the period 2003-2013. During this time objectives were set for reducing road congestion, improving the environmental performance of the freight transport system within the community and enhancing intermodal transport. The “Motorway of the Sea” concept arises in the European Commission’s Transport White Paper "European transport policy for 2010: time to decide" on 12 December 2001, as part of a European policy for the development and promotion of sustainable transport systems. A Motorway of the Sea is defined as a short sea route between two points, covering less distance than by road, which provides a significant improvement in intermodal transport times and to the cost supply chain. It contributes to reducing accidents, noise and CO2 emissions, allows drivers to shorten their driving time and prevents the deterioration of land infrastructure thereby saving on maintenance costs. The viability of a Motorway of the Sea depends as much on geographical location factors as on characteristics of the port, taking into account the different market requirements at all times (energy, environmental and technological). There is a new element created by the European Commission: the trans-European transport network (TEN-T). In the case of Spain, with its two access points in the Pyrenees (La Junquera and Irun) as the only land crossings connected to the mainland and major railway limitations due to the three different gauges, it appears less competitive compared to Europe as a whole. However, Spain is the European country with the most kilometers of coastline (over 8,000 km) and a strategic geographical location, which makes it a logistics platform for the all of Southern Europe. This is why the Motorways of the Sea will have an important role, and an almost necessary one to develop major maritime corridors that Europe supports. In fact, Gijon and Vigo have done very well with their respective sea lanes defined as Motorways of the Sea and which connect with the French port of Nantes-Saint Nazaire, as from there trucks can use nort-heading routes. In parallel, the European Union has taken the first steps to boost the first Motorway of the Sea linking Spain to the UK market, specifically the ports of Bilbao and Tilbury. Furthermore, Spain and Italy sealed an international agreement to develop Motorways of the Sea between both countries, pledging to develop a dozen routes between ports on the Spanish and Italian Mediterranean coasts. Currently, there are sea lanes already in use such as Barcelona-Genova, Valencia-Civitavecchia and Alicante-Naples, these are significantly shorter routes by sea than by road. Brussels identified four major maritime corridors that could hold heavy concentrate shipping traffic, and Spain had a crucial role in two of these from the beginning. On 14 April 2004 the Commission planned through the West-Mos project, a network of maritime traffic which includes the essential sea passages the so-called Baltic Motorway (linking Central and Western Europe with the Baltic countries), the southeast Europe Motorway (linking the Adriatic to the Ionian and eastern Mediterranean Sea), the Western Europe Motorway and southwestern Europe Motorway (that links Spain with Britain and the Atlantic coast of France and with the French Mediterranean coast and Italy, respectively). In order to establish Motorways of the Sea between the Iberian Peninsula and Northern Europe especially, it is necessary to remove trucks from the Pyrenean border, where sees heavy traffic (on average 8000 trucks per day) and addressing the points of greatest congestion, such as the Alps, the Pyrenees, the English Channel, the border roads of France and Euskadi, and proposing the transfer of freight on ships or trains. For its part, in order to receive subsidies and support from the European Commission, the routes selected as Motorways of the Sea should maintain a series of quality criteria related to frequency, costs "from logistics platform to logistics platform," simplicity in administrative procedures and participation of several countries, among others. To begin with, studies consider viable a maritime stretch of at least 450 miles with a volume of about 15,000 platforms per year and that have efficient connections from port to trans-European motorways and rail networks. Another objective of the Motorways of the Sea is to develop port capacity so that they can better connect peripheral regions across the European continent. Referring ports, the terminals at the docks must have a berthing line of 250 m., a draft greater than 8 m, a dual carriageway "ro-ro" ramp, portainer cranes, and ensure operability for a minimum of two loads per week. On 28 March 2011 the second White Paper about the future of transport in Europe "Roadmap to a Single European Transport Area – Towards a competitive and resource efficient transport system" was published. In this Paper the general framework of actions to be undertaken in the next ten years in the field of transport infrastructure was defined, including internal market legislation, reduction of carbon dependency, traffic management technology and clean vehicles, as well as the standardization of different markets. The main challenges are how to eliminate bottlenecks and various obstacles in our European transport network, minimize dependence on oil, reduce GHG emissions by 60% by 2050 compared to 1990 levels and encourage investment in new technologies and infrastructure that reduce EU transport emissions. The connection between the EU and North Africa causes high levels of congestion on the most critical points of the journey: the Spanish-French border, the Mediterranean corridor and Gibraltar Strait. In addition to this, the road transport sector is subject to increased market competition motivated by the elimination of European barriers, greater demands of shippers, greater restrictions on drivers and an increase in the price of diesel. On the other hand, the potential passenger market has a clear differentiation in type of flows: flows in the special period of the Crossing the Straits Operation (CSO), mainly focused on Moroccans who return home on vacation; and flows in the regular session, focused on the global mobile population. Therefore, what I want to achieve with this study is present an analysis of the current situation of freight and passengers to or from the Iberian Peninsula and their causes, as well as present research on the advantages of creating a maritime connection (Motorways of the Sea) with North Africa, based on the technical, administrative, economic, political, social and environmental conditions.

Microbial iron transport via a siderophore shuttle: A membrane ion transport paradigm

A mechanism of ion transport across membranes is reported. Microbial transport of Fe3+ generally delivers iron, a growth-limiting nutrient, to cells via highly specific siderophore-mediated transport systems. In contrast, iron transport in the fresh water bacterium Aeromonas hydrophila is found to occur by means of an indiscriminant siderophore transport system composed of a single multifunctional receptor. It is shown that (i) the siderophore and Fe3+ enter the bacterium together, (ii) a ligand exchange step occurs in the course of the transport, and (iii) a redox process is not involved in iron exchange. To the best of our knowledge, there have been no other reports of a ligand exchange mechanism in bacterial iron transport. The ligand exchange step occurs at the cell surface and involves the exchange of iron from a ferric siderophore to an iron-free siderophore already bound to the receptor. This ligand exchange mechanism is also found in Escherichia coli and seems likely to be widely distributed among microorganisms.

Trapping the transition state of an ATP-binding cassette transporter: Evidence for a concerted mechanism of maltose transport

High-affinity uptake into bacterial cells is mediated by a large class of periplasmic binding protein-dependent transport systems, members of the ATP-binding cassette superfamily. In the maltose transport system of Escherichia coli, the periplasmic maltose-binding protein binds its substrate maltose with high affinity and, in addition, stimulates the ATPase activity of the membrane-associated transporter when maltose is present. Vanadate inhibits maltose transport by trapping ADP in one of the two nucleotide-binding sites of the membrane transporter immediately after ATP hydrolysis, consistent with its ability to mimic the transition state of the γ-phosphate of ATP during hydrolysis. Here we report that the maltose-binding protein becomes tightly associated with the membrane transporter in the presence of vanadate and simultaneously loses its high affinity for maltose. These results suggest a general model explaining how ATP hydrolysis is coupled to substrate transport in which a binding protein stimulates the ATPase activity of its cognate transporter by stabilizing the transition state.

All kinesin superfamily protein, KIF, genes in mouse and human

Intracellular transport is essential for morphogenesis and functioning of the cell. The kinesin superfamily proteins (KIFs) have been shown to transport membranous organelles and protein complexes in a microtubule- and ATP-dependent manner. More than 30 KIFs have been reported in mice. However, the nomenclature of KIFs has not been clearly established, resulting in various designations and redundant names for a single KIF. Here, we report the identification and classification of all KIFs in mouse and human genome transcripts. Previously unidentified murine KIFs were found by a PCR-based search. The identification of all KIFs was confirmed by a database search of the total human genome. As a result, there are a total of 45 KIFs. The nomenclature of all KIFs is presented. To understand the function of KIFs in intracellular transport in a single tissue, we focused on the brain. The expression of 38 KIFs was detected in brain tissue by Northern blotting or PCR using cDNA. The brain, mainly composed of highly differentiated and polarized cells such as neurons and glia, requires a highly complex intracellular transport system as indicated by the increased number of KIFs for their sophisticated functions. It is becoming increasingly clear that the cell uses a number of KIFs and tightly controls the direction, destination, and velocity of transportation of various important functional molecules, including mRNA. This report will set the foundation of KIF and intracellular transport research.

The Role of Iron-Deficiency Stress Responses in Stimulating Heavy-Metal Transport in Plants1

Plant accumulation of Fe and other metals can be enhanced under Fe deficiency. We investigated the influence of Fe status on heavy-metal and divalent-cation uptake in roots of pea (Pisum sativum L. cv Sparkle) seedlings using Cd2+ uptake as a model system. Radiotracer techniques were used to quantify unidirectional 109Cd influx into roots of Fe-deficient and Fe-sufficient pea seedlings. The concentration-dependent kinetics for 109Cd influx were graphically complex and nonsaturating but could be resolved into a linear component and a saturable component exhibiting Michaelis-Menten kinetics. We demonstrated that the linear component was apoplastically bound Cd2+ remaining in the root cell wall after desorption, whereas the saturable component was transporter-mediated Cd2+ influx across the root-cell plasma membrane. The Cd2+ transport system in roots of both Fe-deficient and Fe-sufficient seedlings exhibited similar Michaelis constant values, 1.5 and 0.6 μm, respectively, for saturable Cd2+ influx, whereas the maximum initial velocity for Cd2+ uptake in Fe-deficient seedlings was nearly 7-fold higher than that in Fe-grown seedlings. Investigations into the mechanistic basis for this response demonstrated that Fe-deficiency-induced stimulation of the plasma membrane H+-ATPase did not play a role in the enhanced Cd2+ uptake. Expression studies with the Fe2+ transporter cloned from Arabidopsis, IRT1, indicated that Fe deficiency induced the expression of this transporter, which might facilitate the transport of heavy-metal divalent cations such as Cd2+ and Zn2+, in addition to Fe2+.

Pathways to Low Carbon Transport in the EU – From Possibility to Reality. Report of the CEPS Task Force on transport and climate change. CEPS Task Force Report, June 2013

A new CEPS Task Force Report has identified possible pathways for achieving the EU’s ambitious climate change targets. It concludes that a GHG emissions reduction in line with EU climate change policy is possible, but it requires immediate action. This report argues that most of the reductions required of the transport sector in the EU could come from more energy-efficient vehicles, combined with the gradual introduction of low-carbon fuels and new engine technologies. The key policy for reducing GHG emissions in road transport is the steady tightening of emissions standards in line with technological progress. The report also identifies strategies for the transport system to become more energy and/or carbon efficient, arguing that leverage can be further enhanced by local and city governments’ incentives for efficient and low-carbon vehicles in line with local circumstances and choices. The Task Force on Low Carbon Transport brought together a diverse set of stakeholders from the car and oil industries, business associations, international organisations, member states, academic experts and NGOs. This authoritative report is the result of that unique collaboration.