Integrating allowable design strains in composites with whole life value

Fibre-Reinforced Plastics (FRPs) have been used in civil aerospace vehicles for decades. The current state-of-the-art in airframe design and manufacture results in approximately half the airframe mass attributable to FRP materials. The continual increase in the use of FRP materials over metallic alloys is attributable to the material's superior specific strength and stiffness, fatigue performance and corrosion resistance. However, the full potential of these materials has yet to be exploited as analysis methods to predict physical failure with equal accuracy and robustness are not yet available. The result is a conservative approach to design, but one that can bring benefit via increased inspection intervals and reduced cost over the vehicle life. The challenge is that the methods used in practice are based on empirical tests and real relationships and drivers are difficult to see in this complex process and so the trade-off decision is challenging and uncertain. The aim of this feasibility study was to scope a viable process which could help develop some rules and relationships based on the fundamental mechanics of composite material and the economics of production and operation, which would enhance understanding of the role and impact of design allowables across the life of a composite structure.

Modelling and aerodynamic simulation of a vehicle and failure analysis of a laminated front fender

Master Thesis in Mechanical Engineering field of Maintenance and Production

Swordfish: an Autonomous Surface Vehicle for Network Centric Operations

The design and development of the swordfish autonomous surface vehicle (ASV) system is discussed. Swordfish is an ocean capable 4.5 m long catamaran designed for network centric operations (with ocean and air going vehicles and human operators). In the basic configuration, Swordfish is both a survey vehicle and a communications node with gateways for broadband, Wi-Fi and GSM transports and underwater acoustic modems. In another configuration, Swordfish mounts a docking station for the autonomous underwater vehicle Isurus from Porto University. Swordfish has an advanced control architecture for multi-vehicle operations with mixed initiative interactions (human operators are allowed to interact with the control loops).

A New ROV Design: Issues on Low Drag and Mechanical Symmetry

This paper reports the design of a new remotely operated underwater vehicle (ROV), which has been developed at the Underwater Systems and Technology Laboratory (USTL) - University of Porto. This design is contextualized on the KOS project (Kits for underwater operations). The main issues addressed here concern directional drag minimization, symmetry, optimized thruster positioning, stability and layout of ROV components. This design is aimed at optimizing ROV performance for a set of different operational scenarios. This is achieved through modular configurations which are optimized for each different scenario.

Teachers' experiences and perceptions of voluntary committee work as a vehicle for leadership development

In response to a looming leadership shortage, leadership development for teachers has become an increasingly important area of interest around the world. A review of the literature identified the key components of educational leadership development programs as effective curriculum, leadership practice, relationship building, and reflection. A gap in the research was found regarding the use of voluntary committee work as a vehicle for leadership practice. The purpose of this study was to explore teachers' perceptions of their experiences within board-level committees to determine the key factors that contributed, positively or negatively, to their leadership,pevelopment. A qualitative research design was employed using semistructured interviews with 8 participants. The key findings included a list of factors perceived by teachers as either supporting or hindering their leadership development. The supporting factors were: (a) leadership practice, (b) mentors and role models, (c) relationships and networks, and (d) positive outcomes for students. The hindering factors were: (a) lack of follow through and support, (b) committee members with a careerist approach to the experience, (c) personal and political agendas, and (d) overcommitment leading to burnout. Recommendations for practice focused on strategies to enhanc~_ the committee experience as a tool for leadership development. Recommendations for theory and research suggested more research be done on each of the 8 key factors, perceptions associated with teachers choosing to follow a leadership path, and how school boards can structure the committee process as an effective leadership development tool. This study provides a starting point for educators to begin to intentionally design, develop, and deliver voluntary committee experiences as a tool for leadership development.

Le rôle de la rhétorique dans le projet en design : une exploration du concept d’argumentation de Perelman et Olbrechts-Tyteca

Les projets interdisciplinaires constituent rarement le terrain des études 
sur le processus de conception en design. Les théories générales du design, en tentant de définir ce qui est commun à toutes les disciplines du design, ont davantage étudié les cas typiques que les cas atypiques. Or, nous croyons qu’il existe dans les projets interdisciplinaires une négociation argumentative et une ouverture vers l’autre, propice à l’analyse du processus de conception en design. Pour réaliser l’étude de ce processus, la stratégie empruntée a été la «recherche-projet» qui propose une participation active sur le terrain. 
À l’intérieur de cette stratégie méthodologique, nous avons réalisé l’étude de cas d’un projet hybride, une signalétique identitaire destinée à marquer les écocentres montréalais et orienter leurs usagers. Comme plusieurs autres pratiques du design, la complexité des projets interdisciplinaires demande l’apport de plusieurs acteurs dans le processus. 
Ces personnes conçoivent le projet à travers des représentations visuelles et des échanges verbaux, nous avons choisi de faire porter notre étude principalement sur le second. Pour ce faire, nous avons choisi comme cadre théorique le Traité de l’argumentation de Chaïm Perelman et Lucie Olbrechts-Tyteca en nous intéressant plus spécifiquement aux concepts d’«accord» et d’«auditoire». Parce que le véhicule de l’action en design est la notion de «projet», l’Anthropologie du projet de Jean-Pierre Boutinet sera notre guide à travers cette conduite. L’objet de recherche de ce mémoire sera donc le processus de conception en design qui sera étudié à travers le regard de l’argumentation. L’argumentation s'est révélée la clé du problème que posent les jugements de valeur, commune à toutes les disciplines du design. Qu’est-ce qu’un «bon» projet réalisé? Est-il possible de répondre à cette question, sans tomber dans un cadre argumentatif, sans devoir révéler les arguments qui nous permettent de croire vraisemblable une telle proposition? C’est en mettant en lien la théorie du projet en design et la théorie de l’argumentation que nous avons éclairé la pratique du designer, sa relation à ses collègues et ultimement avec lui-même. L’argumentation s’est avérée un outil permettant la construction de la réalité dans le projet interdisciplinaire.

Tactical Vehicle Routing Planning with Application to Milk Collection and Distribution

De nombreux problèmes pratiques qui se posent dans dans le domaine de la logistique, peuvent être modélisés comme des problèmes de tournées de véhicules. De façon générale, cette famille de problèmes implique la conception de routes, débutant et se terminant à un dépôt, qui sont utilisées pour distribuer des biens à un nombre de clients géographiquement dispersé dans un contexte où les coûts associés aux routes sont minimisés. Selon le type de problème, un ou plusieurs dépôts peuvent-être présents. Les problèmes de tournées de véhicules sont parmi les problèmes combinatoires les plus difficiles à résoudre. Dans cette thèse, nous étudions un problème d’optimisation combinatoire, appartenant aux classes des problèmes de tournées de véhicules, qui est liée au contexte des réseaux de transport. Nous introduisons un nouveau problème qui est principalement inspiré des activités de collecte de lait des fermes de production, et de la redistribution du produit collecté aux usines de transformation, pour la province de Québec. Deux variantes de ce problème sont considérées. La première, vise la conception d’un plan tactique de routage pour le problème de la collecte-redistribution de lait sur un horizon donné, en supposant que le niveau de la production au cours de l’horizon est fixé. La deuxième variante, vise à fournir un plan plus précis en tenant compte de la variation potentielle de niveau de production pouvant survenir au cours de l’horizon considéré. Dans la première partie de cette thèse, nous décrivons un algorithme exact pour la première variante du problème qui se caractérise par la présence de fenêtres de temps, plusieurs dépôts, et une flotte hétérogène de véhicules, et dont l’objectif est de minimiser le coût de routage. À cette fin, le problème est modélisé comme un problème multi-attributs de tournées de véhicules. L’algorithme exact est basé sur la génération de colonnes impliquant un algorithme de plus court chemin élémentaire avec contraintes de ressources. Dans la deuxième partie, nous concevons un algorithme exact pour résoudre la deuxième variante du problème. À cette fin, le problème est modélisé comme un problème de tournées de véhicules multi-périodes prenant en compte explicitement les variations potentielles du niveau de production sur un horizon donné. De nouvelles stratégies sont proposées pour résoudre le problème de plus court chemin élémentaire avec contraintes de ressources, impliquant dans ce cas une structure particulière étant donné la caractéristique multi-périodes du problème général. Pour résoudre des instances de taille réaliste dans des temps de calcul raisonnables, une approche de résolution de nature heuristique est requise. La troisième partie propose un algorithme de recherche adaptative à grands voisinages où de nombreuses nouvelles stratégies d’exploration et d’exploitation sont proposées pour améliorer la performances de l’algorithme proposé en termes de la qualité de la solution obtenue et du temps de calcul nécessaire.

Modificació d'un vehicle industrial

Tenint en compte la problemàtica de les agències de missatgeria de gran extensió i petit volum de clients, en el projecte s’estudien modificacions en un vehicle industrial d’una empresa de missatgeria per tal de redefinir el funcionament d’aquest tipus d’agències. Les modificacions interiors consisteixen a ubicar els elements de treball necessaris per a fer les feines del personal d’oficina dins del vehicle. Les modificacions exteriors tenen com a finalitat diferenciar la imatge exterior del vehicle per associar-la als valors del servei. Per analitzar els avantatges del nou sistema de funcionament que permet gestionar l’agència gràcies a les modificacions aplicades al vehicle, es realitza un pla d’empresa

Simulació mitjançant tècniques CFD d'una culata per al motor del vehicle de baix consum "Àliga-EPS-UdG"

El projecte pretén estudiar i quantificar les restriccions creades al fluid en circular pels conductes d’admissió i escapament de la culata del motor del vehicle Àliga. L’estudi consta de quatre etapes: estudi de les restriccions actuals dels sistemes d’admissió i escapament; anàlisi dels resultats de la culata de sèrie i proposta de millores aplicables al model real; càlcul de les restriccions creades pels models millorats, i finalment, estudi comparatiu dels resultats obtinguts, interpretant els resultats dels principals paràmetres a analitzar

Càlcul, disseny i fabricació d'una carrosseria autoportant en material compòsit per al vehicle de baix consum Àliga

El projecte és l’inici de la creació d’un nou prototip per a poder competir la temporada 2008 a la cursa de vehicles de baix consum Shell Eco-Marathon. El principal objectiu és aconseguir un xassís que redueixi, en la mesura del possible, el pes del prototip a la vegada que asseguri una millor rigidesa i millori l’ergonomia de tot el conjunt. Es dissenyarà tota la part estructural de la carrosseria, que serà sotmesa a càlcul mitjançant la tècnica dels elements finits i posteriorment es realitzarà una guia de producció per tal de guiar els membres de l’equip que en realitzin la producció

A mission control system for an autonomous underwater vehicle

The presented work focuses on the theoretical and practical aspects concerning the design and development of a formal method to build a mission control system for autonomous underwater vehicles bringing systematic design principles for the formal description of missions using Petri nets. The proposed methodology compounds Petri net building blocks within it to de_ne a mission plan for which it is proved that formal properties, such as reachability and reusability, hold as long as these same properties are also guaranteed by each Petri net building block. To simplify the de_nition of these Petri net blocks as well as their composition, a high level language called Mission Control Language has been developed. Moreover, a methodology to ensure coordination constraints for teams of multiple robots as well as the de_nition of an interface between the proposed system and an on-board planner able to plan/replan sequences of prede_ned mission plans is included as well. Results of experiments with several real underwater vehicles and simulations involving an autonomous surface craft and an autonomous underwater vehicles are presented to show the system's capabilities.

Model-based vehicle detection and classification using orthographic approximations

This paper reports the current state of work to simplify our previous model-based methods for visual tracking of vehicles for use in a real-time system intended to provide continuous monitoring and classification of traffic from a fixed camera on a busy multi-lane motorway. The main constraints of the system design were: (i) all low level processing to be carried out by low-cost auxiliary hardware, (ii) all 3-D reasoning to be carried out automatically off-line, at set-up time. The system developed uses three main stages: (i) pose and model hypothesis using 1-D templates, (ii) hypothesis tracking, and (iii) hypothesis verification, using 2-D templates. Stages (i) & (iii) have radically different computing performance and computational costs, and need to be carefully balanced for efficiency. Together, they provide an effective way to locate, track and classify vehicles.

Space-time block coding for four transmit antennas over time-selective fading channels: orthogonal or non-orthogonal design?

The paper deals with an issue in space time block coding (STBC) design. It considers whether, over a time-selective channel, orthogonal STBC (O-STBC) or non-orthogonal STBC (NO-STBC) performs better. It is shown that, under time-selectiveness, once vehicle speed has risen above a certain value, NO-STBC always outperforms O-STBC across the whole SNR range. Also, considering that all existing NO-STBC schemes have been investigated under quasi-static channels only, a new simple receiver is derived for the NO-STBC system under time-selective channels.

Multi-vehicle planning using RRT-connect

The problem of planning multiple vehicles deals with the design of an effective algorithm that can cause multiple autonomous vehicles on the road to communicate and generate a collaborative optimal travel plan. Our modelling of the problem considers vehicles to vary greatly in terms of both size and speed, which makes it suboptimal to have a faster vehicle follow a slower vehicle or for vehicles to drive with predefined speed lanes. It is essential to have a fast planning algorithm whilst still being probabilistically complete. The Rapidly Exploring Random Trees (RRT) algorithm developed and reported on here uses a problem specific coordination axis, a local optimization algorithm, priority based coordination, and a module for deciding travel speeds. Vehicles are assumed to remain in their current relative position laterally on the road unless otherwise instructed. Experimental results presented here show regular driving behaviours, namely vehicle following, overtaking, and complex obstacle avoidance. The ability to showcase complex behaviours in the absence of speed lanes is characteristic of the solution developed.

Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.