1000 resultados para Transformações de contato
Resumo:
The paper analyzes the socioeconomic changes in the development of the sugar cane industries in three Latin America countries, viz. Argentina, Brazil and Mexico, after the second part of the 19th century. It focuses on the role played by institutions in shaping the production models prevalent in the sugar cane industries of those countries.
Resumo:
The present article discuss how world economic transformations, meanly in the course of structural crisis, conditioned the development strategies of Latin America in the large period between the Great Depression in the 1930s and the 2007 open crisis in the USA. The article provides special attention to national development projects. This paper defends that the outbreak and crisis of developmentism, as well the neoliberal accumulation standard advent, may only be explained, not disregarding the great importance of internal factors, from the international division of labor transformations, the policies and actions of main countries, the geopolitical position of countries and the forces correlation in international scale.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O objetivo deste trabalho foi avaliar o pH e a densidade óptica das soluções de azul de metileno a 1% e 2% (tamponadas e não tamponadas) após a imersão de três cimentos endodônticos. Foram preparados oitenta espécimes de cada cimento endodôntico (Endofill, AH Plus e Sealapex), os quais foram imersos nas soluções corantes. As soluções foram analisadas antes e após a imersão dos materiais nos períodos de tempo de 0, 24, 48 e 72h. Foram realizadas avaliações do pH utilizando um pHmetro e da densidade óptica utilizando um espectofotômetro ajustado em 596nm. Os dados de pH foram analisados através de estatística descritiva e os dados da densidade óptica foram analisados pela ANOVA e teste de Tukey 5%. Pôde-se verificar que as soluções corantes de azul de metileno tamponadas e não tamponadas apresentaram pequena variação nos valores de pH e densidade óptica antes do contato com os cimentos endodônticos. As soluções corantes não tamponadas apresentaram valores de pH menores que as tamponadas, independentemente do contato com qualquer cimento endodôntico. Os cimentos endodônticos promoveram alterações nos valores de pH das soluções corantes, sendo que as maiores alterações ocorreram nas soluções não tamponadas. Ocorreram alterações nos valores da densidade óptica das soluções corantes tamponadas e não tamponadas nos diferentes períodos de tempo de análise, sendo diferentes para cada cimento endodôntico utilizado
Resumo:
Nos últimos anos, a biotecnologia tem proporcionado avanços no desenvolvimento de biomateriais a serem utilizados como dispositivos médicos. Dentre esses dispositivos, podemos destacar aqueles que promovem a reparação tecidual e, também, a liberação controlada de fármacos. Partindo deste propósito, lentes de contato à base de celulose bacteriana (CB) foram desenvolvidas, visando o efeito curativo e reparativo para doenças da superfície ocular. A adição de ciclodextrinas (CDs) e fármacos, como o ciprofloxacino (CP) e o diclofenaco de sódio (DS) á essas lentes proporcionando propriedades terapêuticas e de liberação controlada dos fármacos. No entanto, para certificar-se do uso seguro desses compósitos pela indústria de dispositivos médicos, é necessário verificar se não possuem atividade citotóxica, genotóxica e/ou mutagênica. Sendo assim, a proposta do presente trabalho foi o desenvolvimento de uma adição eficaz de fármacos às lentes de contato de CB, para que sejam liberados de maneira controlada e, também, a verificação de sua biossegurança. Para essa verificação foram realizados ensaios in vitro de citotoxicidade (ensaio com o kit XTT e Sobrevivência Clonogênica), genotoxicidade (ensaio Cometa) e mutagenicidade (teste do Micronúcleo) com os respectivos. Após a análise estatística dos resultados foi possível verificar que o material CB-CP apresentou efeito citotóxico e os materiais CB-DS e CB-CD-DS apresentaram efeito citotóxico, genotóxico e mutagênico. Essa informação é fundamental para uma futura utilização segura desse biomaterial pela indústria de dispositivos médicos ...
Resumo:
In this paper, we will show the types of Lorentz transformations, from the most described in books, special Lorentz transformation that relates two inertial systems whose relative velocities are directed along an axis of the respective bases systems. However, we will see a peculiarity that goes unnoticed in this transformation, although they have reported in many books a parallel between the transformation inertial systems, due to the fact that the speed is parallel to an axis, it is actually a semi-parallel processing. The next transformation that we will see is one in which a system moves with a relative speed that has arbitrary direction with respect to a given system, we will show that this transformation may be appointed as non-rotational Lorentz transformation. Before obtain, the later type of transformation, the rotational Lorentz transformation, which is the interface between Special Relativity and General Relativity, we will describe the systems to be rotated, not just inertial systems, show what the characteristics are that define the non-rotational and rotational transformations. The in last topic of this chapter we will also show how the idea of Thoma’s theorythat uses this transformation to create what he defines as the proper coordinate axes of the particleused to obtain the factor 1/2 electron spin. In the last chapter we show how the Lorentz invariants are obtained, quantities measures that are also in different Lorentz reference, with the focus on mass that has erroneously been described in many books, that varies according to the agreement reference system
Resumo:
Infections Related to Healthcare (IRAS) is a problem of worldwide concern, responsible for much morbidity and lethality. The incidence of IRAS associated with resistant microorganisms has increased worldwide. It is also known that the etiology of bacterial resistance is multifactorial, thus controlling the spread of resistant microorganisms requires the implementation of control measures that involve the performance of standard and contact precautions, plus the use of antimicrobials. To diagnose the problem as to the likely accession of the measures of infection control was prepared in a form to inspect the practices of the health staff acting with patients in contact precautions. The inspections had an educational and awareness, no punitive measures were taken to staff as warnings, suspensions or complains of a breach of ethics. If any irregularities were found, the professional standards of care countershaft contact and the nurse responsible for the head nurse or unit area were notified and counseled about the correct practice of isolation. While an undergraduate student initiated precautionary inspections of contact in order to verify the actual use of isolation measures, since the professionals were unaware of my active participation in the Committee on Infection Control. Facilities and difficulties were encountered in the process, and from the inspections was possible interventions to facilitate compliance with standards for isolation imposed by contact. Since the instrument has significantly improved adherence to contact isolation practices, the members of the Infection Control regulated inspections and intend to use it as a permanent method
Resumo:
O município de Rio Claro, localizado na região central do estado de São Paulo, durante o auge da era do café, da imigração tanto estrangeira como regional e da instalação de várias empresas, dentre elas a Companhia Paulista de Estradas de Ferro se urbanizou num acelerado ritmo, assim como tantas outras cidades do Brasil. Como resultado o aglomerado urbano cresceu, necessitando que seu perímetro expandisse para a zona rural, comprometendo tanto o seu patrimônio histórico quanto o cultural. Antigas propriedades datadas do final do século XIX que resistem à ação do tempo e mantém viva a riqueza e a cultura da época dão lugar à cidade. Esse processo é observado no bairro rural do Sobrado, localizado na região norte de Rio Claro, que vem sofrendo diretamente com a expansão urbana através da criação de novos loteamentos residenciais e comerciais. Portanto, o avanço da urbanização tem provocado à degradação e/ou desaparecimento dos fatos históricos e culturais ainda presentes nos bairros rurais do município
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O presente trabalho discute a relação sociedade e natureza a partir do estudo de caso dos processos erosivos identificados em um recorte espacial, localizado no Noroeste do município de Regente Feijó/SP. As dinâmicas socioeconômicas que se processaram no Oeste Paulista e, consequentemente, no município de Regente Feijó, ao longo das décadas de ocupação, são evidências das lógicas de apropriação ancoradas em pressupostos de exploração massiva dos recursos naturais, tendo em vista a produção de gêneros agrícolas valorizados no mercado internacional, tais como o café, o algodão e a cana-de-açúcar. Além disso, a pecuária também se constituiu como importante base econômica regional e, somada aos demais usos agrícolas, contribuiu para o depauperamento dos solos, o assoreamento dos cursos d’água e o surgimento de erosões (laminares e lineares) nas áreas rurais e urbanas. Neste sentido, além da discussão envolvendo os problemas desencadeados pelo agravamento dos processos erosivos aos pequenos produtores rurais e aos moradores do Distrito de Espigão, é evidenciada a importância das práticas conservacionistas como forma de contingenciamento de tais fenômenos
Energia, suas formas e transformações: uma abordagem contextualizada por meio de material não-formal
Resumo:
Energy is a physical quantity very present in physics. Although extremely useful, its concept is very abstract for most students in high school and college. Identify the presence and form of energy in a given phenomenon is not simple, as there is immediate understanding on the transfer and transformation. This work emphasizes the study of mechanical energy in its different forms as well as the thermal energy, considering the possible transformations between them. To this end, use is mad of toys, exploring its potential as an alternative material to be use in supplement classroom teaching in primary and secondary levels. The proposed use of ludic pedagogy takes into account the author’s experience as an intern project Toy Scientific Department of Physics and its role as mediator in the workshops offered by the project to school at these levels
Resumo:
It is known that the process of capitalist restructuring resulted in socio-spatial transformations in various geographical scales. Space is continually diversifying and redefining their roles, driven mostly by external agents. This search analyzes how and intensities are consolidating these new refunctionalisation the District of Gardenia city of Rancharia-SP.The study brings some concepts in the definition of small town, which are fundamental to the definition of the area that is the object of our study. Some features are explained in the District, such as location, history of economic activities preterit in a record that cover the 1950s to the present day. From this record ,it will be exposed and analyzed the services (private and collective goods) offered to the population in order to highlight their importance for better social equity. The information for your preparation of this work were supported mostly on reports and records historical and contextualized with specific bibliography. In developing the search is portrayed as the district Gardenia was modifying its economic activities, physical space and how it is currently being structured with tourist activity. There is also intended to show that even though the district with urban core urban functions simple in content space is consolidating complex processes in its various dimensions
Resumo:
The process of urbanization that happened in Brazil during the twentieth century led to processes of structuring and re-organization of space, besides the emergence of many urban problems. Industrialization and urbanization are some of the main causes that could be cited as consequences of this process. As a result of the steep rise of cities, the transport systems became fundamental in boosting flows (immaterial) and the mobility of people and stuff (materials) in the territory. The urban model created for the city of São Paulo in the 1930s was repeated over the years in the medium-sized cities, being repeated the same problems that occurred in the metropolis. In this context our work fits in analyzing the changes occurring in the urban area of São José do Rio Preto - SP, from his relationship with the public transportation system in the face of intra-urban spatial configuration of the city. Transport, while it is recognized by authors as being really important for the analysis and intra-urban spatial configuration, has been little analyzed as the object of study by a geographer, and so, our work has more value
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)