Malmquist indexes using a geometric distance function (GDF):application to a sample of Portuguese bank branches

Traditional approaches to calculate total factor productivity (TFP) change through Malmquist indexes rely on distance functions. In this paper we show that the use of distance functions as a means to calculate TFP change may introduce some bias in the analysis, and therefore we propose a procedure that calculates TFP change through observed values only. Our total TFP change is then decomposed into efficiency change, technological change, and a residual effect. This decomposition makes use of a non-oriented measure in order to avoid problems associated with the traditional use of radial oriented measures, especially when variable returns to scale technologies are to be compared. The proposed approach is applied in this paper to a sample of Portuguese bank branches.

From national innovation systems to national innovation capacity:internationalisation and technology transfer perspectives

The last decade or so has witnessed the emergence of the national innovation system (NIS) phenomenon. Since then, many scholars have investigated NIS and its implementation in different countries. However, there are very few investigations into the relationship between the NIS of a country and its national innovation capacity. This paper aims to make a contribution in this area by examining the link that currently exists between these two topics. Whilst examining this relationship, we also explore internationalisation and technology transfer, being cognate areas that have been investigated during the same period. This follows our assertion that the link between NIS and national innovation capacity is the mechanism of internationalisation and technology transfer. The NIS approach was introduced in the late 1980s (see Freeman, 1987; Dosi et al., 1988) and further elaborated later (see Lundvall, 1992; Nelson, 1993; Edquist, 1997). In essence, a country?s NIS is a historically grown subsystem of the entire national economy consisting of organisations and institutions which play a major role in the innovative activity in the country. In the NIS approach, interactions within organisations as well as the interplay between organisations and institutions are of central importance. The NIS approach has been used to reveal the structure of the innovation processes and the main actors involved in them in industrialised and emerging countries. Although the national focus remains strong, it has been accompanied by studies seeking to analyse the notion of systems of innovation at an international level and at a sub-national scale (Archibugi et al., 1999). Dosi in the edition of Archibugi et al. (1999) argues that the general background of the discussion of national systems is the observation of non-random distributions across countries of: corporate capabilities; organisational forms; strategies; and ultimately revealed performances, in terms of production efficiency and inputs productivities, rates of innovation, rates of adoption/diffusion of innovation themselves, dynamics of market shares on the world markets, growth of income and employment. They also mention that there are several approaches to NIS. Nelson (1993) focuses upon the specificities of national institutions and policies supporting directly or indirectly innovation, diffusion and skills accumulation. Patel and Pavitt (1991) have stressed the links between the national patterns of technological accumulation and the competencies and innovative strategies of a few major national companies. Amable et al (1997) and Soskice (1993) and Zysman (1994) focus on the specifics of national institutions including, for example, the forms of organization, financial and labour markets, training institutions, forms of state intervention in the economy etc. However, the most common reference is by Lundvall (1992) who argues that the focus on the national level is associated with the fact that national economies vary according to their production system and their institutional framework and these differences are in turn strengthened by different historical experiences, language and culture. On the other hand, the national innovation capability consists of abilities to create and carry new technological possibilities through to economic practice. The term covers a wide range of activities from capability to invent to capability to innovate and to capability to improve existing technology beyond the original design parameters (Kim, 1997). The term innovation is often associated by many with technological change at international frontiers. However, technological capability is not the same as innovation capability. Technological capability refers to assimilation, use, adaptation, and change to existing technologies. It also enables the creation of new technologies and development of new products and processes in response to changing economic environments. It denotes operational command over knowledge (Kim, 1997). It is manifested not merely by the knowledge possessed, but, more important, by the uses to which that knowledge can be put and by the proficiency with which it is applied in the activities of investment and production and in the creation of new knowledge (Westphal et al., 1985). Therefore, the analytical framework that is used in this paper is based on the way a country derives from its NIS a national innovation capacity. There are two perspectives that are identified on this way. These are internationalisation and technology transfer. Even though NIS is not directly related to national innovation capacity, to achieve national innovation capacity from NIS, the country should have the ability for technology transfer. Technology transfer is a link between these two phenomena. On the other hand, internationalisation can be either the input or the output of the relationship between NIS and national innovation capability. If a company is investing in a country because of its national innovation capacity, this can be regarded as an input to the relationship between NIS and national innovation capacity. If this company is investigating the national innovation capacity of a country then, for its internationalisation, the national innovation capacity should be important, which in turn means this company is active in innovation and innovation is also an important success factor. The interrelationship between the investment of the company and the NIS of the country (assuming that the country is competent and competitive in technology transfer) will generate and improve that country?s national innovation capacity. This is the output of internationalisation from the relationship between NIS and national innovation capacity. When companies are evaluating whether to internationalise, they investigate certain factors in the countries in which they are considering to invest. The ability to transfer technology is dependent on ability to adopt a new technology and also on the learning derived from this technology. If countries wish to attract innovation related investment they need to show their ability to have a NIS and also the capability to transfer technology. Without the technology transfer capability, the NIS is not functioning. Therefore, companies that internationalise will investigate the factors common to NIS, technology transfer, and their business needs. Through this paper we will demonstrate this link though its mechanisms. Our research will be through extensive literature review and identifying relevant aspects of previous research carried out by the authors. It will investigate certain factors of different countries that are successful in attracting innovation related foreign direct investment. Through these, we will point out the factors that are important for the link and mechanisms of NIS and national innovation capability.

Business processes and knowledge management

Knowledge has been a subject of interest and inquiry for thousands of years since at least the time of the ancient Greeks, and no doubt even before that. “What is knowledge” continues to be an important topic of discussion in philosophy. More recently, interest in managing knowledge has grown in step with the perception that increasingly we live in a knowledge-based economy. Drucker (1969) is usually credited as being the first to popularize the knowledge-based economy concept by linking the importance of knowledge with rapid technological change in Drucker (1969). Karl Wiig coined the term knowledge management (hereafter KM) for a NATO seminar in 1986, and its popularity took off following the publication of Nonaka and Takeuchi’s book “The Knowledge Creating Company” (Nonaka & Takeuchi, 1995). Knowledge creation is in fact just one of many activities involved in KM. Others include sharing, retaining, refining, and using knowledge. There are many such lists of activities (Holsapple & Joshi, 2000; Probst, Raub, & Romhardt, 1999; Skyrme, 1999; Wiig, De Hoog, & Van der Spek, 1997). Both academic and practical interest in KM has continued to increase throughout the last decade. In this article, first the different types of knowledge are outlined, then comes a discussion of various routes by which knowledge management can be implemented, advocating a process-based route. An explanation follows of how people, processes, and technology need to fit together for effective KM, and some examples of this route in use are given. Finally, there is a look towards the future.

Has DRG payment influenced the technical efficiency and productivity of diagnostic technologies in Portuguese public hospitals? An empirical analysis using parametric and non‐parametric methods

The use of Diagnosis Related Groups (DRG) as a mechanism for hospital financing is a currently debated topic in Portugal. The DRG system was scheduled to be initiated by the Health Ministry of Portugal on January 1, 1990 as an instrument for the allocation of public hospital budgets funded by the National Health Service (NHS), and as a method of payment for other third party payers (e.g., Public Employees (ADSE), private insurers, etc.). Based on experience from other countries such as the United States, it was expected that implementation of this system would result in more efficient hospital resource utilisation and a more equitable distribution of hospital budgets. However, in order to minimise the potentially adverse financial impact on hospitals, the Portuguese Health Ministry decided to gradually phase in the use of the DRG system for budget allocation by using blended hospitalspecific and national DRG casemix rates. Since implementation in 1990, the percentage of each hospitals budget based on hospital specific costs was to decrease, while the percentage based on DRG casemix was to increase. This was scheduled to continue until 1995 when the plan called for allocating yearly budgets on a 50% national and 50% hospitalspecific cost basis. While all other nonNHS third party payers are currently paying based on DRGs, the adoption of DRG casemix as a National Health Service budget setting tool has been slower than anticipated. There is now some argument in both the political and academic communities as to the appropriateness of DRGs as a budget setting criterion as well as to their impact on hospital efficiency in Portugal. This paper uses a twostage procedure to assess the impact of actual DRG payment on the productivity (through its components, i.e., technological change and technical efficiency change) of diagnostic technology in Portuguese hospitals during the years 1992–1994, using both parametric and nonparametric frontier models. We find evidence that the DRG payment system does appear to have had a positive impact on productivity and technical efficiency of some commonly employed diagnostic technologies in Portugal during this time span.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

A dual definition for the factor content of trade and its effect on factor rewards in US manufacturing sector

We introduce a dual definition of the Factor Content of Trade (FCT) using the concept of the Equivalent Autarky Equilibrium. Estimating a symmetric normalized quadratic revenue function for the U.S. manufacturing sector between 1965 and 1991, we find that the FCT for capital is positive, while the FCT for skilled and unskilled labor is negative, suggesting that the Leontief Paradox is not present. Then the growth rate of the factor rewards is decomposed to the FCT, endowments, and technological change effects. We find that technological change is the most important determinant in explaining wage inequality between skilled and unskilled labor.

Accounting and the 'insoluble' problem of health care costs

Health service accounting reforms are frequently promoted, explained or justified with reference to ageing populations, expensive medical technologies and their purported implications for the cost of health care. Drawing on Foucault’s genealogical method, we examine the emergence of concerns regarding health expenditure in the wake of the creation of the British National Health Service in 1948, and their relationship with health service accounting practices. We argue that concerns regarding the cost of health care are historically contingent rather than inescapable consequences of demographic and technological change, and that health service accounting practices are both constitutive and reflective of such concerns. We conclude by relating our analysis to current attempts to control costs and increase efficiency in the health services.

Enhancing Promotional Strategies through the Use of Web 2.0

We have witnessed a rising interest – by both academic and managerial field – in the marketing application of Web 2.0 techniques. Yet the effective impact and change it brings is still unclarified. The importance of Web 2.0 is constantly on the rise. We see consumers join social networks, using social tools in an ever greater number, therefor it gives companies a new and effective tool for marketing communication and other marketing-related activities. In our research, we first aim to clarify the definition and boundaries of Web 2.0. Then through a literature review we collect some of the most important areas of marketing to be affected by this seemingly technological change. We also have a brief overview of challenges and risks firms face in this new environment.

Three essays on entrepreneurial entry, serial entrepreneurship, and labor turnover

This study explores two important aspects of entrepreneurship — liquidity constraints and serial entrepreneurs, with an additional analysis of occupational choice among wage workers. In the first essay, I revisit the question of whether entrepreneurs face liquidity constraints in business formation. The principle challenge is that wealth is correlated with unobserved ability, and adequate instruments are often difficult to identify. This paper uses the son's birth order as an instrument for household wealth. I exploit the data available in the Korean Labor and Income Panel Study, and find evidence of liquidity constraints associated with self-employment in South Korea. The second essay develops and tests a model that explains entry into serial entrepreneurship and the performance of serial entrepreneurs as the result of selection on innate ability. The model supposes that agents establish businesses with imperfect information about their entrepreneurial ability and the profitability of business ideas. Agents continually observe signals with which they update their beliefs, and this process eventually determines their next business choice. Selection on ability induces a positive correlation between entrepreneurial experience (measured by previous business earnings and founding experience) and serial business formation, as well as its subsequent performance. The predictions in the model are tested using panel data from the NLSY79. The analysis permits a distinction to be made between selection on innate ability and learning by doing. Motivated by previous empirical findings that white-collar workers had higher turnover rates than blue-collar workers during firm expansion, the third essay further examines job turnover among workers with or without specific skills. I present a search-matching model, which predicts that when firm growth is driven by technological advance, workers whose skills are specific to the obsolete technology show a higher tendency to separate from their jobs. This hypothesis is tested with data from the PSID. I find supportive evidence that in the context of technological change, having an occupation requiring specific skills, such as computer specialists or engineers, increases the odds of job separation by nearly eight percent. ^

Prospecção tecnológica para geração de energia eólica

The acceleration of technological change and the process of globalization has intensified competition and the need for new products (goods and services), resulting in growing concern for organizations in the development of technological, economic and social advances. This work presents an overview of the development of wind energy-related technologies and design trends. To conduct this research, it is (i) a literature review on technological innovation, technological forecasting methods and fundamentals of wind power; (ii) the analysis of patents, with the current technology landscape studied by means of finding information in patent databases; and (iii) the preparation of the map of technological development and construction of wind turbines of the future trend information from the literature and news from the sector studied. Step (ii) allowed the study of 25 644 patents between the years 2003-2012, in which the US and China lead the ranking of depositors and the American company General Electric and the Japanese Mitsubishi stand as the largest holder of wind technology. Step (iii) analyzed and identified that most of the innovations presented in the technological evolution of wind power are incremental product innovations to market. The proposed future trends shows that the future wind turbines tend to have a horizontal synchronous shaft, which with the highest diameter of 194m and 164m rotor nacelle top, the top having 7,5MW generation. The materials used for the blades are new materials with characteristics of low density and high strength. The towers are trend with hybrid materials, uniting the steel to the concrete. This work tries to cover the existing gap in the gym on the use of technological forecasting techniques for the wind energy industry, through the recognition that utilize the patent analysis, analysis of scientific articles and stories of the area, provide knowledge about the industry and influencing the quality of investment decisions in R & D and hence improves the efficiency and effectiveness of wind power generation

Educação profissional e tecnológica de turismo no Brasil: análise através da percepção de docentes da rede federal de educação

The increasing pace of technological change and innovation in the labor market are important landmarks that contribute to accelerate the improvement of vocational and technological education. The need to analyze the educational processes is correlated with this dynamic in order to respond to the pedagogical processes and inherent to the labor market needs in evidence. This research theme is centered on targeted education process for tourist activity that is premised on improving the quality of services, taking as analysis parameter technological higher education in the federal education network (IF), covering the design, similarity and the differences in the courses offered, the axis of Tourism, Hospitality and Leisure instituted by the National catalog Technological Colleges and the National Science and Technology Department in Brazil. The research also aims to investigate the design and implementation of these upper and search courses emphasize the importance of training for students. The research is exploratory qualitative from survey data on the websites of the Ministry of Education, was adopted as a research procedure the questionnaire sent to coordinators via institutional email courses, to collect data in order to obtain results about Technological Education Federal Education Network. The survey results show that most courses offered by technological higher education in the federal education network (IF) is the Tourism Management, we noted that this option is the result of the ease in assembling the structure of the courses in relation to others; teachers have this type of education a more practical option for students coming to the conclusion that the courses undergo a fragile process, stating that the formation lies only in the student's interest in obtaining the higher diploma course without concern for quality this academic background, demand for courses is by being fast graduation. Even as a result of the design and development of Political and Pedagogical projects it was found that they are built in the most collegial many of them without the participation of a pedagogue; about the permanence of the student identified a high dropout rate, occurring in some campuses to migration to the traditional higher education, a BA in tourism. Thus, this work aimed to contextualize the technological higher education in tourism, presenting the reality of the current situation, aiming to discuss the phenomenon from the description made by all subjects and the research object, knowledge of which is due to experience the federal education network that was able to bring the essence of the matter.

O produtor familiar na pecuária leiteira : limites e potencialidades

The technological change is nowadays, comprehended as a playing field which involves cultural and economic processes of appreciation and depreciation of the social aspects of family unit. The exclusion of small producers from the activity is used as an argument to characterize that in the contemporary intercapitalist competition, the family ways of production take up restrict social positions of a technical progress and of a cultural and economic appreciation. The state, a coparcener of the modernization process, has its relevance as a financing agent, a technical capacitor, an infrastructure propitiator, that is, through macro and microeconomic policies which can create sustainable conditions to permit, mainly, not only the family producer to be inserted in the activity, but, above all, to remain in it. This way, this study aims to identify and analyze the family producer, through its limits and potentialities, with a thesis that this would be the main agent responsible for boosting the Brazilian milk production in quantity and quality. Therefore, results were compared obtained from a field survey with data collection via semi-structured open interviews in a sample of 108 producers effectively respondents, namely: 59 family farmers with active DAP (research focus) and 49 employers producers the municipality of Monte Alegre de Minas - MG. Technological indices were used to identify the developmental stage of the producers, thus allowing a comparative study between them. The field research covered all rural municipality of Monte Alegre de Minas – MG and, the result found that the majority of family farmers presented lower rates than technological employers producers. However, it allowed us to state also that the producer family and assisted by public policies, can be the agent of transformation of dairy farming.

Work-life Balance and Gender Regime After the Economic Transition

Work-life balance (WLB) is a key issue in our societies in which there is increasing pressure to be permanently available on demand and to work more intensively, and when due to technological change the borders between work and private life appear to be dissolving. However, the social, institutional and normative frames of a region have a huge impact on how people experience work and private life, where the borders between these spheres lie and how much control individuals have in managing these borders. Based on these arguments, this editorial to the special issue Work-life balance/imbalance: individual, organisational and social experiences in Intersections. EEJSP draws attention to the social institutions, frameworks and norms which have an effect on experience, practices and expectations about work-life balance. Concerning the time horizon, this editorial focuses on the change of regime as a reference point since socialist and post-socialist eras differ significantly, although there is still some continuity between them. The authors of this introduction offer an overview of the situation in CEE (Central and Eastern Europe) based mainly on examples of Visegrad countries.