Middle Miocene evolution and stable isotope ratios of Globorotalia (Fohsella) in the western equatorial Pacific

Evolution of the planktic foraminiferal lineage Globorotalia (Fohsella) occurred during the Miocene between 23.7 and 11.8 Ma and forms the basis for stratigraphic subdivision of the early middle Miocene (Zones N 10 through N 12). Important morphologic changes within the G. (Fohsella) lineage included a marked increase in test size, a transition from a rounded to an acute periphery, and the development of a keel in later forms. We found that the most rapid changes in morphology of G. (Fohsella) occurred between 13 and 12.7 Ma and coincided with an abrupt increase in the delta18O ratios of shell calcite. Comparison of isotopic results of G. (Fohsella) with other planktic foraminifers indicate that delta18O values of the lineage diverge from surface-dwelling species and approach deep-dwelling species after 13.0 Ma, indicating a change in depth habitat from the surface mixed layer to intermediate depth near the thermocline. Isotopic and faunal evidence suggests that this change in depth stratification was associated with an expansion of the thermocline in the western equatorial Pacific. After adapting to a deeper water habitat at 13.0 Ma, the G. (Fohsella) lineage became extinct abruptly at 11.8 Ma during a period when isotopic and faunal evidence suggest a shoaling of the thermocline. Following the extinction of G. (Fohsella), the ecologic niche of the lineage was filled by the Globorotalia (Menardella) group, which began as a deep-water form and later evolved to an intermediate-water habitat. We suggest that the evolution of G. (Fohsella) and G. (Menardella) were tightly linked to changes in the structure of the thermocline in the western equatorial Pacific.

Migration and Residence Patterns of Salmonids in Puget Sound, Washington

Thesis (Ph.D.)--University of Washington, 2016-08

Shipping noise in a dynamic sea: a case study of grey seals in the Celtic Sea

Shipping noise is a threat to marine wildlife. Grey seals are benthic foragers, and thus experience acoustic noise throughout the water column, which makes them a good model species for a case study of the potential impacts of shipping noise. We used ship track data from the Celtic Sea, seal track data and a coupled ocean-acoustic modelling system to assess the noise exposure of grey seals along their tracks. It was found that the animals experience step changes in sound levels up to ~20dB at a frequency of 125Hz, and ~10dB on average over 10-1000Hz when they dive through the thermocline, particularly during summer. Our results showed large seasonal differences in the noise level experienced by the seals. These results reveal the actual noise exposure by the animals and could help in marine spatial planning.

Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya

The PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.

Optimizing PAT data transmission: assessing the accuracy of temperature summary data to estimate environmental conditions

Pop-up archival tags (PAT) provide summary and high-resolution time series data at predefined temporal intervals. The limited battery capabilities of PATs often restrict the transmission success and thus temporal coverage of both data products. While summary data are usually less affected by this problem, as a result of its lower size, it might be less informative. We here investigate the accuracy and feasibility of using temperature at depth summary data provided by PATs to describe encountered oceanographic conditions. Interpolated temperature at depth summary data was found to provide accurate estimates of three major thermal water column structure indicators: thermocline depth, stratification and ocean heat content. Such indicators are useful for the interpretation of the tagged animal's horizontal and vertical behaviour. The accuracy of these indicators was found to be particularly sensitive to the number of data points available in the first 100 m, which in turn depends on the vertical behaviour of the tagged animal. Based on our results, we recommend the use of temperature at depth summary data as opposed to temperature time series data for PAT studies; doing so during the tag programming will help to maximize the amount of transmitted time series data for other key data types such as light levels and depth.

Feeding habits of the blue shark (Prionace glauca) off the coast of Brazil

Estômagos de 222 tubarões-azuis coletados ao longo da costa brasileira foram analisados, sendo 116 da região nordeste e 106 da região sul. Um total de 51 táxons de presas foram identificados. Os itens mais importantes na região sul foram baleias Mysticeti, teleósteos, o peixe gempilídeo Ruvettus pretiosus e o nomeídeo Arioma bondi. Cefalópodes foram mais diversos, com preferência pelas espécies migradoras verticais Histioteuthis spp., Cranchiidae e o polvo epipelágico Ocythoe tuberculata. Na região nordeste, o tubarão-azul consumiu principalmente teleósteos, incluindo o peixe alepisaurídeo Alepisaurus ferox e o gempilídeo Gempylus serpens. Entre os cefalópodes, Histioteuthis spp. e o polvo epipelágico Tremoctopus violaceus foram os itens principais. Predação sobre cardumes foi ocasional, como observada para Arioma bondi. Aves também foram consumidas em ambas as regiões. Puffinus gravis foi o quinto item mais freqüente na região nordeste. Durante o ciclo migratório reprodutivo, o tubarão-azul costuma predar nas adjacências da termoclina, que é mais profunda na região nordeste e mais perto da superfície na região sul.

Détermination des niches écologiques du phytoplancton à partir de données in situ du lac Montjoie

Le rôle central du phytoplancton à la base de la chaîne trophique aquatique motive une compréhension étayée des facteurs pouvant faire varier les populations et la composition des populations de phytoplancton. Cette compréhension est d'autant plus importante dans le contexte actuel, puisque nous savons que l'humain influence le climat et les milieux aquatiques par sa présence et ses activités. Nous tentons donc, dans notre étude, de déterminer les variables environnementales importantes qui dictent les changements de taille et de composition de la communauté de phytoplancton à l'échelle d'un lac et d'en déduire les niches réalisées des différentes espèces du lac. L'utilisation d'une station mobile de manière verticale dans le lac Montjoie (Saint-Denis-de-Brompton) a permis de collecter des données in situ à haute fréquence et résolution temporelle caractérisant la colonne d'eau. Combinée à ces mesures, une banque de données sur l'abondance de différentes catégories de phytoplancton a été créée à l'aide d'un cytomètre en flux imageur (IFCB) et d'un programme de reconnaissance d'images qui lui est associé. En combinant ces données nous avons déterminé que la température moyenne au-dessus de la thermocline et que la profondeur limite de chlorophylle (2 écarts-types sous le maximum de chlorophylle) étaient les 2 variables (parmi les variables mesurées) les plus appropriées pour déterminer les niches réalisées de nos catégories de phytoplancton. À l'aide de ces 2 variables, nous avons pu déterminer les niches réalisées d'une trentaine de catégories présentes dans notre lac. Les niches ont été déterminées à la fois sur les données d'abondance et sur les données de taux de croissance nette à l'aide de deux méthodes différentes, soit l'analyse canonique des correspondances (CCA) et la maximisation de l'entropie d'information (MaxEnt). Ce sont finalement les niches déterminées avec les taux de croissance nette qui sont les plus pertinentes. Les deux méthodes ont donné des résultats semblables, mais c'est MaxEnt qui est la plus versatile pour l'ajout de nouvelles variables explicatives et c'est donc celle-ci que nous privilégierons dans le futur.