Report on applying agreed-upon procedures of Kossuth Connections, Algona, Iowa, and the Iowa Commission on Volunteer Services within the Iowa Department of Economic Development, now known as the Iowa Economic Development Authority, for the period October 2010 through June 2011

Report on applying agreed-upon procedures of Kossuth Connections, Algona, Iowa, and the Iowa Commission on Volunteer Services within the Iowa Department of Economic Development, now known as the Iowa Economic Development Authority, for the period October 2010 through June 2011

Testing Guide for Implementing Concrete Paving Quality Control Procedures, March 2008

Construction of portland cement concrete pavements is a complex process. A small fraction of the concrete pavements constructed in the United States over the last few decades have either failed prematurely or exhibited moderate to severe distress. In an effort to prevent future premature failures, 17 state transportation agencies pooled their resources, and a pooled fund research project, Material and Construction Optimization for Prevention of Premature Pavement Distress in PCC Pavements, was undertaken in 2003. Its purpose was to evaluate existing quality control tests, and then select and advance the state-of-the-practice of those tests most useful for optimizing concrete pavements during mix design, mix verification, and construction. This testing guide is one product of that project. The guide provides three recommended testing schemes (Levels A, B, and C, depending on a pavement’s design life and traffic volumes, etc.) that balance the costs of testing with the risk of failure for various project types. The recommended tests are all part of a comprehensive suite of tests described in detail in this guide.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa Final Report, June 2010

For well over 100 years, the Working Stress Design (WSD) approach has been the traditional basis for geotechnical design with regard to settlements or failure conditions. However, considerable effort has been put forth over the past couple of decades in relation to the adoption of the Load and Resistance Factor Design (LRFD) approach into geotechnical design. With the goal of producing engineered designs with consistent levels of reliability, the Federal Highway Administration (FHWA) issued a policy memorandum on June 28, 2000, requiring all new bridges initiated after October 1, 2007, to be designed according to the LRFD approach. Likewise, regionally calibrated LRFD resistance factors were permitted by the American Association of State Highway and Transportation Officials (AASHTO) to improve the economy of bridge foundation elements. Thus, projects TR-573, TR-583 and TR-584 were undertaken by a research team at Iowa State University’s Bridge Engineering Center with the goal of developing resistance factors for pile design using available pile static load test data. To accomplish this goal, the available data were first analyzed for reliability and then placed in a newly designed relational database management system termed PIle LOad Tests (PILOT), to which this first volume of the final report for project TR-573 is dedicated. PILOT is an amalgamated, electronic source of information consisting of both static and dynamic data for pile load tests conducted in the State of Iowa. The database, which includes historical data on pile load tests dating back to 1966, is intended for use in the establishment of LRFD resistance factors for design and construction control of driven pile foundations in Iowa. Although a considerable amount of geotechnical and pile load test data is available in literature as well as in various State Department of Transportation files, PILOT is one of the first regional databases to be exclusively used in the development of LRFD resistance factors for the design and construction control of driven pile foundations. Currently providing an electronically organized assimilation of geotechnical and pile load test data for 274 piles of various types (e.g., steel H-shaped, timber, pipe, Monotube, and concrete), PILOT (http://srg.cce.iastate.edu/lrfd/) is on par with such familiar national databases used in the calibration of LRFD resistance factors for pile foundations as the FHWA’s Deep Foundation Load Test Database. By narrowing geographical boundaries while maintaining a high number of pile load tests, PILOT exemplifies a model for effective regional LRFD calibration procedures.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa: Volume I: An Electronic Database for PIle LOad Tests, September 2011

• Examine current pile design and construction procedures used by the Iowa Department of Transportation (DOT). • Recommend changes and improvements to these procedures that are consistent with available pile load test data, soils information, and bridge design practice recommended by the Load and Resistance Factor Design (LRFD) approach.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa: Volume II: Field Testing of Steel Piles in Clay, Sand, and Mixed Soils and Data Analysis, September 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results ofLRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured loaddisplacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Agreed-upon procedures report of the Iowa Economic Development Authority for the quarter ended March 31, 2012

Agreed-upon procedures report of the Iowa Economic Development Authority for the quarter ended March 31, 2012

Effets de la perfusion de facteurs natriurétiques auriculaires synthétiques sur quelques flux régionaux chez le volontaire sain [Effect of synthetic atrial natriuretic factors on various regional blood flows in the healthy subject]

The effects of continuous infusions of 2 synthetic atrial natriuretic peptides Ile12-(3-28) (rANP) and Meth12-(3-28) (hANP) eicosahexapeptides on blood pressure, heart rate, skin blood flow, glomerular filtration rate, renal plasma flow, apparent hepatic blood flow, and carotid blood flow were evaluated in normal volunteers. A rANP infusion at increasing rates (1-40 micrograms/min) induced a decrease in blood pressure, an increase in heart rate and in skin blood flow linearly related to the dose administered. In contrast, hANP infusion at 1 microgram/min for 4 hours induced an initial increase followed by a secondary fall in skin blood flow without blood pressure changes. A 4-hour rANP infusion at 0.5 and 5 mcg/min did not alter glomerular filtration rate but induced a delayed and dose-related fall in renal plasma flow from 531 to 461 (p less than 0.05), and from 554 to 342 ml/min (p less than 0.001) respectively, with a consequential rise in the filtration fraction. The 5 mcg/min dose furthermore significantly reduced blood pressure following a latency period of 2.5 hours. A 2-hours rANP infusion at 0.5 micrograms/min induced a fall in apparent hepatic blood flow from 1,087 to 863 ml/min (p less than 0.01), without simultaneously altering blood pressure. Similarly, a 2-hour hANP infusion at 2 micrograms/min altered neither blood pressure nor carotid blood flow. In conclusion, ANP infusion induced changes in systemic and regional hemodynamics varying in direction, intensity and duration.

Processus de reconnaissance et d'identification de personnes décédées

Recognition and identification processes for deceased persons. Determining the identity of deceased persons is a routine task performed essentially by police departments and forensic experts. This thesis highlights the processes necessary for the proper and transparent determination of the civil identities of deceased persons. The identity of a person is defined as the establishment of a link between that person ("the source") and information pertaining to the same individual ("identifiers"). Various identity forms could emerge, depending on the nature of the identifiers. There are two distinct types of identity, namely civil identity and biological identity. The paper examines four processes: identification by witnesses (the recognition process) and comparisons of fingerprints, dental data and DNA profiles (the identification processes). During the recognition process, the memory function is examined and helps to clarify circumstances that may give rise to errors. To make the process more rigorous, a body presentation procedure is proposed to investigators. Before examining the other processes, three general concepts specific to forensic science are considered with regard to the identification of a deceased person, namely, matter divisibility (Inman and Rudin), transfer (Locard) and uniqueness (Kirk). These concepts can be applied to the task at hand, although some require a slightly broader scope of application. A cross comparison of common forensic fields and the identification of deceased persons reveals certain differences, including 1 - reverse positioning of the source (i.e. the source is not sought from traces, but rather the identifiers are obtained from the source); 2 - the need for civil identity determination in addition to the individualisation stage; and 3 - a more restricted population (closed set), rather than an open one. For fingerprints, dental and DNA data, intravariability and intervariability are examined, as well as changes in these post mortem (PM) identifiers. Ante-mortem identifiers (AM) are located and AM-PM comparisons made. For DNA, it has been shown that direct identifiers (taken from a person whose civil identity has been alleged) tend to lead to determining civil identity whereas indirect identifiers (obtained from a close relative) direct towards a determination of biological identity. For each process, a Bayesian model is presented which includes sources of uncertainty deemed to be relevant. The results of the different processes combine to structure and summarise an overall outcome and a methodology. The modelling of dental data presents a specific difficulty with respect to intravariability, which in itself is not quantifiable. The concept of "validity" is, therefore, suggested as a possible solution to the problem. Validity uses various parameters that have an acknowledged impact on teeth intravariability. In cases where identifying deceased persons proves to be extremely difficult due to the limited discrimination of certain procedures, the use of a Bayesian approach is of great value in bringing a transparent and synthetic value. RESUME : Titre: Processus de reconnaissance et d'identification de personnes décédées. L'individualisation de personnes décédées est une tâche courante partagée principalement par des services de police, des odontologues et des laboratoires de génétique. L'objectif de cette recherche est de présenter des processus pour déterminer valablement, avec une incertitude maîtrisée, les identités civiles de personnes décédées. La notion d'identité est examinée en premier lieu. L'identité d'une personne est définie comme l'établissement d'un lien entre cette personne et des informations la concernant. Les informations en question sont désignées par le terme d'identifiants. Deux formes distinctes d'identité sont retenues: l'identité civile et l'identité biologique. Quatre processus principaux sont examinés: celui du témoignage et ceux impliquant les comparaisons d'empreintes digitales, de données dentaires et de profils d'ADN. Concernant le processus de reconnaissance, le mode de fonctionnement de la mémoire est examiné, démarche qui permet de désigner les paramètres pouvant conduire à des erreurs. Dans le but d'apporter un cadre rigoureux à ce processus, une procédure de présentation d'un corps est proposée à l'intention des enquêteurs. Avant d'entreprendre l'examen des autres processus, les concepts généraux propres aux domaines forensiques sont examinés sous l'angle particulier de l'identification de personnes décédées: la divisibilité de la matière (Inman et Rudin), le transfert (Locard) et l'unicité (Kirk). Il est constaté que ces concepts peuvent être appliqués, certains nécessitant toutefois un léger élargissement de leurs principes. Une comparaison croisée entre les domaines forensiques habituels et l'identification de personnes décédées montre des différences telles qu'un positionnement inversé de la source (la source n'est plus à rechercher en partant de traces, mais ce sont des identifiants qui sont recherchés en partant de la source), la nécessité de devoir déterminer une identité civile en plus de procéder à une individualisation ou encore une population d'intérêt limitée plutôt qu'ouverte. Pour les empreintes digitales, les dents et l'ADN, l'intra puis l'inter-variabilité sont examinées, de même que leurs modifications post-mortem (PM), la localisation des identifiants ante-mortem (AM) et les comparaisons AM-PM. Pour l'ADN, il est démontré que les identifiants directs (provenant de la personne dont l'identité civile est supposée) tendent à déterminer une identité civile alors que les identifiants indirects (provenant d'un proche parent) tendent à déterminer une identité biologique. Puis une synthèse des résultats provenant des différents processus est réalisée grâce à des modélisations bayesiennes. Pour chaque processus, une modélisation est présentée, modélisation intégrant les paramètres reconnus comme pertinents. À ce stade, une difficulté apparaît: celle de quantifier l'intra-variabilité dentaire pour laquelle il n'existe pas de règle précise. La solution préconisée est celle d'intégrer un concept de validité qui intègre divers paramètres ayant un impact connu sur l'intra-variabilité. La possibilité de formuler une valeur de synthèse par l'approche bayesienne s'avère d'une aide précieuse dans des cas très difficiles pour lesquels chacun des processus est limité en termes de potentiel discriminant.

Neuromonitoring after major neurosurgical procedures.

Postoperative care of major neurosurgical procedures is aimed at the prevention, detection and treatment of secondary brain injury. This consists of a series of pathological events (i.e. brain edema and intracranial hypertension, cerebral hypoxia/ischemia, brain energy dysfunction, non-convulsive seizures) that occur early after the initial insult and surgical intervention and may add further burden to primary brain injury and thus impact functional recovery. Management of secondary brain injury requires specialized neuroscience intensive care units (ICU) and continuous advanced monitoring of brain physiology. Monitoring of intracranial pressure (ICP) is a mainstay of care and is recommended by international guidelines. However, ICP monitoring alone may be insufficient to detect all episodes of secondary brain insults. Additional invasive (i.e. brain tissue PO2, cerebral microdialysis, regional cerebral blood flow) and non-invasive (i.e. transcranial doppler, near-infrared spectroscopy, EEG) brain monitoring devices might complement ICP monitoring and help clinicians to target therapeutic interventions (e.g. management of cerebral perfusion pressure, blood transfusion, glucose control) to patient-specific pathophysiology. Several independent studies demonstrate such multimodal approach may optimize patient care after major neurosurgical procedures. The aim of this review is to evaluate some of the available monitoring systems and summarize recent important data showing the clinical utility of multimodal neuromonitoring for the management of main acute neurosurgical conditions, including traumatic brain injury, subarachnoid hemorrhage and stroke.

Particle dispersion in synthetic turbulent flows

We study particle dispersion advected by a synthetic turbulent flow from a Lagrangian perspective and focus on the two-particle and cluster dispersion by the flow. It has been recently reported that Richardson¿s law for the two-particle dispersion can stem from different dispersion mechanisms, and can be dominated by either diffusive or ballistic events. The nature of the Richardson dispersion depends on the parameters of our flow and is discussed in terms of the values of a persistence parameter expressing the relative importance of the two above-mentioned mechanisms. We support this analysis by studying the distribution of interparticle distances, the relative velocity correlation functions, as well as the relative trajectories.

Langevin approach to generate synthetic turbulent flows

We present an analytical scheme, easily implemented numerically, to generate synthetic Gaussian turbulent flows by using a linear Langevin equation, where the noise term acts as a stochastic stirring force. The characteristic parameters of the velocity field are well introduced, in particular the kinematic viscosity and the spectrum of energy. As an application, the diffusion of a passive scalar is studied for two different energy spectra. Numerical results are compared favorably with analytical calculations.

Iowa Autism Council By-Laws and Operating Procedures, Revised 2012

These By-laws and Operating Procedures are designed to guide the membership and work of the Iowa Autism Council. The Iowa Autism Council is a collaborative resource that envisions its role as an advocate for children and adults living with Autism Spectrum Disorder (autism and Asperger's and other conditions represented on the autism spectrum) and their families. As such, it is committed to representing individuals with diverse and changing educational needs. Iowa Autism Council (IAC) shall have, and will perform, functions and duties as specified by law. Responsibilities include offering advice, consultation, and recommendations to Governor Culver and the Iowa legislature regarding matters concerning the ASD population. The role of the Council members is to advise, not advocate, for an individual position. Advise means to inform, counsel, recommend, suggest or guide. To advocate means to plead for your case or position, to favor an individual case or argument. The advisory Council is to provide advice, based on facts and good judgment.

Synthetic applications of chiral unsaturated epoxy alcohols prepared by sharpless asymmetric epoxidation

An overview of the synthesis and applications of chiral 2,3-epoxy alcohols containing unsaturated chains is presented. One of the fundamental synthetic routes to these compounds is Sharpless asymmetric epoxidation, which is reliable, highly chemoselective and enables easy prediction of the product enantioselectivity. Thus, unsaturated epoxy alcohols are readily obtained by selective oxidation of the allylic double bond in the presence of other carbon-carbon double or triple bonds. The wide availability of epoxy alcohols with unsaturated chains, the versatility of the epoxy alcohol functionality (e.g. regio- and stereo-selective ring opening; oxidation; and reduction), and the arsenal of established alkene chemistries, make unsaturated epoxy alcohols powerful starting materials for the synthesis of complex targets such as biologically active molecules. The popularization of ring-closing metathesis has further increased their value, making them excellent precursors to cyclic compounds.

Bacterial sensors: synthetic design and application principles

Bacterial reporters are live, genetically engineered cells with promising application in bioanalytics. They contain genetic circuitry to produce a cellular sensing element, which detects the target compound and relays the detection to specific synthesis of so-called reporter proteins (the presence or activity of which is easy to quantify). Bioassays with bacterial reporters are a useful complement to chemical analytics because they measure biological responses rather than total chemical concentrations. Simple bacterial reporter assays may also replace more costly chemical methods as a first line sample analysis technique. Recent promising developments integrate bacterial reporter cells with microsystems to produce bacterial biosensors. This lecture presents an in-depth treatment of the synthetic biological design principles of bacterial reporters, the engineering of which started as simple recombinant DNA puzzles, but has now become a more rational approach of choosing and combining sensing, controlling and reporting DNA 'parts'. Several examples of existing bacterial reporter designs and their genetic circuitry will be illustrated. Besides the design principles, the lecture also focuses on the application principles of bacterial reporter assays. A variety of assay formats will be illustrated, and principles of quantification will be dealt with. In addition to this discussion, substantial reference material is supplied in various Annexes.