Síntese de ésteres graxos a partir da biomassa da microalga Chlorella sp. por hidrólise “in situ” seguido de esterificação

Neste trabalho, a produção de ésteres graxos da biomassa úmida da microalga Chlorella sp. foi investigada pelo método de hidrólise seguido de esterificação e comparado com o método convencional de extração/transesterificação. Na primeira etapa do processo de hidrólise “in situ” seguido de esterificação ocorreu à hidrólise, onde a água presente na biomassa (50 e 100% em massa) reagiu com os lipídios de reserva, na presença de H2SO4 (20, 40 e 60% em massa), sendo obtidos os ácidos graxos brutos. Na segunda etapa do processo, os ácido graxos foram submetidos à reação de esterificação por 1 ou 4 h na presença de metanol, na razão molar de 30:1 álcool:AG, com H2SO4 10% em massa a 60 ou 100 °C. De acordo com os resultados obtidos no processo de hidrólise/esterificação, os melhores rendimentos – cerca de 7,3±0,8% de FAMEs, em relação a biomassa inicial – foram obtidos na presença de 60% de catalisador e 50% de umidade, na etapa de hidrólise e 100 °C por 4 h na etapa de esterificação. No método convencional de extração-transesterificação, os melhores rendimentos – 7,1±1,8% de FAMEs em relação à biomassa seca – foram obtidos utilizando a mistura de clorofórmio:metanol 2:1 v/v. Em resumo os rendimentos obtidos nos dois métodos de produção de ésteres graxos foram próximos. No entanto, o processo de hidrólise “in situ” seguido de esterificação possui vantagens como a utilização da biomassa úmida.

Produção de biodiesel de blendas dos óleos de mamona e arroz em escala piloto

A utilização do óleo de mamona como matéria-prima para produção de biodiesel mostra-se inviável na combustão interna do motor devido sua natureza química incomum que lhe confere especificações acima do permitido nas especificações técnicas da legislação nacional brasileira. Desta forma, a blenda com óleo de arroz refinado (OM:OA) qualifica o biodiesel atendendo a legislação nacional, além de corrigir a elevada acidez do óleo bruto de mamona prejudicial ao processo de transesterificação homogênea básica. No presente estudo realizou-se a produção de biodiesel etílico em escala piloto a partir de blendas de óleo bruto de mamona e óleo refinado de arroz em dois processos: o primeiro processo adotando a mistura direta dos dois óleos e o segundo processo pela esterificação antecipada do óleo bruto de mamona. Ambos os processos foram aplicados visando tanto definir os critérios de processo (acidez inicial) quanto o cumprimento das especificações técnicas (viscosidade e densidade). A produção em escala piloto (200 litros/batelada) foi realizada na Usina Demonstrativa para Produção de Biodiesel – BIOSUL (Edital FINEP, 2005) da Universidade Federal do Rio Grande - FURG utilizando em ambos os processos transesterificação, com hidróxido de sódio, e esterificação com ácido sulfúrico. Os processos apresentaram resultados satisfatórios, sendo o processo de mistura direta (Processo A) o que obteve melhores rendimentos (94,04%, blenda 20:80) enquanto que o processo de pré- esterificação (Processo B) foi aquele que proporcionou a maior fração de óleo de mamona na blenda (80,36%, 33:67). Os resultados para o Processo A de glicerol livre, monoacilgliceróis, diacilgliceróis, triacilgliceróis e de glicerol total foram, respectivamente, de 1,322 %, 6,092 %, 1,000 %, 0,884 e 3,152%. Neste estudo foi comprovada a viabilidade do processamento, em batelada, de blendas dos óleos de mamona e arroz. O óleo de mamona bruto pode ser utilizado em até 30% produzindo biodiesel dentro da legislação, verificando-se assim a viabilidade do uso da mamona na produção de biocombustíveis.

Chemical and physical effects of ultrasound: sonoluminescence and materials

When a liquid is irradiated with ultrasound, acoustic cavitation (the formation, growth, and implosive collapse of bubbles in liquids irradiated with ultrasound) generally occurs. This is the phenomenon responsible for the driving of chemical reactions (sonochemistry) and the emission of light (sonoluminescence). The implosive collapse of bubbles in liquids results in an enormous concentration of sound energy into compressional heating of the bubble contents. Therefore, extreme chemical and physical conditions are generated during cavitation. The study of multibubble sonoluminescence (MBSL) and single-bubble sonoluminescence (SBSL) in exotic liquids such as sulfuric acid (H2SO4) and phosphoric acid (H3PO4) leads to useful information regarding the intracavity conditions during bubble collapse. Distinct sonoluminescing bubble populations were observed from the intense orange and blue-white emissions by doping H2SO4 and H3PO4 with sodium salts, which provides the first experimental evidence for the injected droplet model over the heated-shell model for cavitation. Effective emission temperatures measured based on excited OH• and PO• emission indicate that there is a temperature inhomogeneity during MBSL in 85% H3PO4. The formation of a temperature inhomogeneity is due to the existence of different cavitating bubble populations: asymmetric collapsing bubbles contain liquid droplets and spherical collapsing bubbles do not contain liquid droplets. Strong molecular emission from SBSL in 65% H3PO4 have been obtained and used as a spectroscopic probe to determine the cavitation temperatures. It is found that the intracavity temperatures are dependent on the applied acoustic pressures and the thermal conductivities of the dissolved noble gases. The chemical and physical effects of ultrasound can be used for materials synthesis. Highly reactive species, including HO2•, H•, and OH• (or R• after additives react with OH•), are formed during aqueous sonolysis as a consequence of the chemical effects of ultrasound. Reductive species can be applied to synthesis of water-soluble fluorescent silver nanoclusters in the presence of a suitable stabilizer or capping agent. The optical and fluorescent properties of the Ag nanoclusters can be easily controlled by the synthetic conditions such as the sonication time, the stoichiometry of the carboxylate groups to Ag+, and the polymer molecular weight. The chemical and physical effects of ultrasound can be combined to prepare polymer functionalized graphenes from graphites and a reactive solvent, styrene. The physical effects of ultrasound are used to exfoliate graphites to graphenes while the chemical effects of ultrasound are used to induce the polymerization of styrene which can then functionalize graphene sheets via radical coupling. The prepared polymer functionalized graphenes are highly stable in common organic solvents like THF, CHCl3, and DMF. Ultrasonic spray pyrolysis (USP) is used to prepare porous carbon spheres using energetic alkali propiolates as the carbon precursors. In this synthesis, metal salts are generated in situ, introducing porous structures into the carbon spheres. When different alkali salts or their mixtures are used as the precursor, carbon spheres with different morphologies and structures are obtained. The different precursor decomposition pathways are responsible for the observed structural difference. Such prepared carbon materials have high surface area and are thermally stable, making them potentially useful for catalytic supports, adsorbents, or for other applications by integrating other functional materials into their pores.

Síntese de biodiesel etílico de girassol utilizando transesterificação alcalina seguido da adição on pot de H2SO4

No presente trabalho foi investigada a adição on pot de H2SO4 no processo de transesterificação do óleo de girassol com etanol e metanol empregando catalisador alcalino (NaOH e KOH). Após o processo, ocorreu uma eficiente separação tanto do biodiesel etílico como metílico de seus co-produtos. Com a adição on pot de H2SO4 todo sabão formado no meio reacional foi transformado em ácidos graxos livres e o catalisador em sal (Na2SO4 ou K2SO4). A esterificação dos ácidos graxos livres presentes no biodiesel foi aplicada para atingir os padrões de biocombustíveis. Os ácidos graxos contidos no biodiesel foram esterificados na presença de uma mistura com razão molar de 60:1 e 80:1 álcool:ácido graxo, com H2SO4 5 e 10 % em massa. Também foi avaliada a influência da quantidade de catalisador na reação paralela de saponificação. De acordo com os resultados observou-se que a quantidade de sabão formado no processo, variou entre 1,80 e 10,66 % para 1 e 2 % de catalisador, respectivamente. A adição on pot de H2SO4 permitiu aumentar o rendimento de obtenção de biodiesel, e reduziu a geração de efluentes provenientes das lavagens para remoção do sabão, quando comparado com o processo convencional. As análises foram realizadas para avaliar a qualidade do biodiesel, com exceção da estabilidade oxidativa, os demais parâmetros estão de acordo com as normas da ANP. A glicerina foi obtida com uma pureza de 95 % de glicerol com aspecto límpido e incolor, sendo seu principal contaminante o sal proveniente da neutralização do catalisador.

Síntese de ésteres graxos de chlorella sp. utilizando os processos de extração-transesterificação e transesterificação in situ

Este trabalho teve como objetivo realizar estudo comparativo dos processos de extração-transesterificação e transesterificação in situ para a síntese de ésteres metílicos e etílicos a partir da microalga Chlorella sp. Utilizando o processo de extração-transesterificação, a extração dos lipídeos foi realizada a partir da biomassa seca de Chlorella sp., pelo uso de três diferentes solventes, clorofórmio:metanol, etanol e metanol, sendo o maior rendimento, 12,3%, obtido com a mistura clorofórmio:metanol (2:1 v/v). Independente do solvente extrator utilizado, as frações lipídicas obtidas apresentaram altos índices de acidez que variaram de 39,39 a 112,76 mg KOH/g. Após, os ésteres alquilicos graxos foram obtidos através da transesterificação das frações lipídicas realizada com metanol e etanol (razão molar álcool:extrato lipidico, 30:1) na presença de 10% de H2SO4 como catalisador a temperatura de 100 oC por 4h. A transesterificação in situ (alcoolise direta) aplicada a biomassa de Chlorella sp, foi realizada a 60 e 100 oC por 4 h usando 20% de H2SO4 com base na biomassa seca. A reação foi realizada a partir de 50 g de biomassa seca na presença de 150 mL de álcool (etanol ou metanol) A partir do método de transesterificação in situ foram obtidos maiores rendimentos de ésteres alquilicos graxos (11,0%), quando comparado ao processo de extração-transesterificação (8,1%). Os produtos purificados apresentaram teores de ésteres que variaram de 75,4% a 99,8%. A variação da temperatura de reação da transesterificação in situ não teve influência significativa nos rendimentos dos produtos.

Production of biodiesel through esterification catalysed by Ionic liquids

Biodiesel is an alternative diesel fuel that is produced from vegetable oils and animal fats. Currently, most biodiesel is made from oils, methanol, and an alkaline catalyst. Conventional catalysts is commonly used for catalyzing esterification of fatty acid to produce biodiesel. However, a better and greener method was found. An ionic liquid (IL) is a molten salt consisting of a cation and an anion, with low melting temperature. It offers a better solution than sulfuric acid, because it can be recycled and reused in subsequent runs after recovery steps. In this study, a Brønsted acidic IL, 1-butyl-3-methylimidazolium hydrogen sulfate ([BMIM][HSO4]) was used as a catalyst in the esterification of oleic acid with methanol into biodiesel. The effect of different operation parameters such as methanol to oil molar ratio, amount of catalyst, reaction temperature, and reaction time were tested. The optimum conditions for esterification of oleic acid were identified as oleic acid/methanol molar ratio of 1/10, amount of catalyst 10 wt%, reaction time of 4 h, and reaction temperature of 90oC. FAME content of produced biodiesel was analyzed and confirmed using GC chromatography.

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

Arsenic bioleaching in medical realgar ore and arsenicbearing refractory gold ore by combination of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans

Purpose: To develop a novel biotechnological method for removing toxic arsenic from two kinds of representative arsenic-containing ores using different mixed mesophilic acidophiles. Methods: Bioleaching of the two types of arsenic-containing ores by mixed arsenic-unadapted Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans or mixed arsenic-adapted cultures, were carried out. Arsenic bioleaching ratios in the various leachates were determined and compared. Results: The results showed that the maximum arsenic leaching ratio obtained from realgar in the presence of mixed adapted cultures was 28.6 %. However, the maximum arsenic leaching ratio from realgar in the presence of mixed unadapted strains was only 12.4 %. Besides, maximum arsenic leaching ratios from arsenic-bearing refractory gold ore by mixed adapted strains or unadapted strains were 45.0 and 22.9 %, respectively. Oxidation of these two ores by sulfuric acid was insignificant, as maximum arsenic leaching ratios of realgar and arsenic-bearing refractory gold ore in the absence of any bacterium were only 2.8 and 11.2 %, respectively. Conclusion: Arsenic leaching ratio of realgar and refractory gold ore can be enhanced significantly in the presence of arsenic-adapted mesophilic acidophiles.

S-Alkylated/aralkylated 2-(1H-indol-3-yl-methyl)-1,3,4- oxadiazole-5-thiol derivatives. 1. Synthesis and characterization

Purpose: To synthesize and characterize S-alkylated/aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4- oxadiazole-5-thiol derivatives. Methods: 2-(1H-indol-3-yl)acetic acid (1) was reacted with absolute ethanol and catalytic amount of sulfuric acid to form ethyl 2-(1H-indol-3-yl)acetate (2) which was transformed to 2-(1H-indol-3- yl)acetohydrazide (3) by refluxing with hydrazine hydrate in methanol. Ring closure reaction of 3 with carbon disulfide and ethanolic potassium hydroxide yielded 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5- thiol (4) which was finally treated with alkyl/aralkyl halides (5a-u) in DMF and NaH to yield Salkylated/ aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiols (6a-u). Structural elucidation was done by IR, 1H-NMR and EI-MS techniques Results: 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiol (4) was synthesized as the parent molecule and was characterized by IR and the spectrum showed peaks resonating at (cm-1) 2925 (Ar-H), 2250 (S-H ), 1593 (C=N ) and 1527 (Ar C=C ); 1H-NMR spectrum showed signals at δ 11.00 (s, 1H, NH-1ʹ), 7.49 ( br.d, J = 7.6 Hz, 1H, H-4\'), 7.37 (br.d, J = 8.0 Hz, 1H, H-7\'), 7.34 (br.s, 1H, H-2\'), 7.09 (t, J = 7.6 Hz, 1H, H-5\'), 7.00 (t, J = 7.6 Hz, 1H, H-6\') and 4.20 (s, 2H, CH2-10ʹ). EI-MS presented different fragments peaks at m/z 233 (C11H9N3OS)˙+ [M+2]+, 231 (C11H9N3OS)˙+ [M]+, 158 (C10H8NO)+, 156 (C10H8N2)˙+, 130 (C9H8N)+. The derivatives (6a-6u) were prepared and characterized accordingly. Conclusion: S-alkylated/aralkylated 2-(1H-indol-3-ylmethyl)-1,3,4-oxadiazole-5-thiols (6a-u) were successfully synthesized.

Caracterización de las condiciones de salud y de trabajo y su relación con lesiones cutáneas en los orfebres artesanales de Mompox Bolivar-Colombia 2015

INTRODUCCIÓN Las alteraciones de la salud relacionadas con el trabajo (enfermedades y accidentes), pueden prevenirse desde las actividades bien enfocadas del Sistema de Gestión de Seguridad y Salud en el Trabajo (SGSST), realizando la identificación y control de los agentes causales en el ambiente de trabajo y la vigilancia de la salud de la población trabajadora. El proyecto desarrollado va dirigido a un grupo específico de artesanos orfebres en la ciudad de Mompox, Bolivar, en la que esta labor artesanal se centra en el arte de la filigrana, transmitido generacionalmente desde antaño En esta ciudad los artesanos orfebres, aunque corresponden a un sector informal de la economía, se encuentran agremiados principalmente en tres asociaciones ubicadas en la cabecera municipal. En el desempeño de sus labores, estos profesionales del arte de la filigrana manipulan agentes químicos como el ácido nítrico, el ácido sulfúrico, la plata y el mercurio, los cuales se utilizan en las diferentes etapas del proceso que incluye técnicas propias de esta labor. Teniendo en cuenta que la información disponible en la literatura científica describe principalmente los efectos de agentes químicos en otros oficios diferentes a la población orfebre y conociendo que la exposición a estas sustancias químicas puede generar variados efectos en el organismo, el interés de este proyecto se centra específicamente en las alteraciones cutáneas posiblemente relacionadas con las condiciones de trabajo de esta población del sector informal. MATERIALES Y METODOS La presente investigación es un estudio de corte trasversal, el cual realizó una selección por conveniencia de 114 trabajadores de orfebres Momposinos con el fin de identificar la relación de las condiciones de trabajo con la presencia de alteraciones cutáneas de los trabajadores que laboran en la orfebrería artesanal en la ciudad de Mompox, departamento de Bolívar, en el año 2015, de tal manera que dejando a consideración la descripción de los hallazgos encontrados, se posibiliten futuras y precisas investigaciones e intervenciones en este colectivo de trabajadores. Los instrumentos empleados para la recolección de la información y para el cumplimento de los objetivos fueron la encuesta Nacional de Condiciones de Trabajo del Instituto Nacional de Seguridad e Higiene en el trabajo de España (INSHT) que permite recolectar información sobre la caracterización de la población a nivel sociodemográfico y ocupacional, y para la determinación de patologías dermatológicas relacionadas con el trabajo se utilizó el Cuestionario NOSQ-2002 Nórdico- Enfermedades Cutáneas de origen Laboral, en su versión validada en español. Se describieron las variables categóricas con porcentajes y las continuas (cuantitativas) con medidas de tendencia central y dispersión La asociación entre los hallazgos de exposición ocupacional y los síntomas y signos en piel, fue estimada mediante riesgos relativos. RESULTADOS El 75,4% del total de la población correspondió al género masculino y el 67,5% reportó realizar sus labores como trabajadores independientes. Respecto a la identificación de condiciones de salud, la percepción por parte de los orfebres fue positiva, reportando muy buena salud en el 34% de los mismos. El 8% de la población manifestó alteraciones dermatológicas tipo eczema en los últimos seis meses y el 11% las presentó principalmente en manos. Respecto de la iniciación del eczema, el 97% de los trabajadores reportó que se iniciaba al contacto con sustancias químicas y el 98,7% manifestó que se encontraban realizando la labor de orfebrería cuando inició el eczema. La lesión prevalente fue mancha roja sin edema (8%), seguida de ronchas o manchas y ampollas pequeñas (3%) y de piel seca con escamas (2%). CONCLUSIONES Los resultados de la presente investigación mostraron la prevalencia de alteraciones cutáneas principalmente en las manos, tipo eczema (manchas rojas) o prurito (picor). Se recomienda la disminución de los tiempos de exposición, adecuación de jornadas y tiempos de descanso, sistemas de protección personal adecuados y la implementación de un programa de educación y participación para el control integral del riesgo.

Kinetic modeling for the synthesis of ethyl levulinate

This work is focused on studying the kinetics of esterification of levulinic acid in an isothermal batch reactor using ethanol as a reactant and as a protic polar solvent at the same time and in the presence of an acid catalyst (sulfuric acid). The choice of solvent is important as it affects the kinetics and thermodynamics of the reaction system moreover, the knowledge of the reaction kinetics plays an important role in the design of the process. This work is divided into two stages; The first stage is the experimental part in which the experimental matrix was developed by changing the process variables one at a time (temperature, molar ratio between reactants, and catalyst concentration) in order to study their influence on the kinetics; the second stage is using the obtained data from the experiments to build the modeling part in order to estimate the thermodynamics parameters.

Randomized, Double-Blind Trial of the Effect of Fluid Composition on Electrolyte, Acid-Base, and Fluid Homeostasis in Patients Early After Subarachnoid Hemorrhage.

Hyper- and hyponatremia are frequently observed in patients after subarachnoidal hemorrhage, and are potentially related to worse outcome. We hypothesized that the fluid regimen in these patients is associated with distinct changes in serum electrolytes, acid-base disturbances, and fluid balance.

A primer of water, electrolyte, and acid-base syndromes.

Mode of access: Internet.