Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution

Poly(hydroxybutyrate) (PHB) obtained from sugar cane was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 ºC. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. On the other hand, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of ~2.0 m, but for electric fields higher than 1.5 kV.cm-1, a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53 % was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ/mol. Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications.

Sugarcane productivity correlated with physical-chemical attributes to create soil management zone

The socioeconomic importance of sugar cane in Brazil is unquestionable because it is the raw material for the production of ethanol and sugar. The accurate spatial intervention in the management of the crop, resulting zones of soil management, increases productivity as well as its agricultural yields. The spatial and Person's correlations between sugarcane attributes and physico-chemical attributes of a Typic Tropustalf were studied in the growing season of 2009, in Suzanápolis, State of São Paulo, Brazil (20°28'10'' S lat.; 50°49'20'' W long.), in order to obtain the one that best correlates with agricultural productivity. Thus, the geostatistical grid with 120 sampling points was installed to soil and data collection in a plot of 14.6 ha with second crop sugarcane. Due to their substantial and excellent linear and spatial correlations with the productivity of the sugarcane, the population of plants and the organic matter content of the soil, by evidencing substantial correlations, linear and spatial, with the productivity of sugarcane, were indicators of management zones strongly attached to such productivity.

Exposure to fungi in dockers

Several activities are ensured by dockers increase occupational exposure to several risk factors. being one of them the fungal burden from the load. In this study we aim at characterizing fungal contamination in one warehouse that storage sugar cane from a ship, and also in one crane cabinet that unload the same sugar cane from the ship. Air samples were collected from the warehouse and from inside the crane cabinet. An outdoor sample was also collected, from each sampling site, and regarding as reference. Sampling volume was selected depending in the contamination expected and the air samples were collect through an impaction method in a flow rate of 140 L/min onto malt extract agar (MEA) supplemented with chloramphenicol (0.05%), using the Millipore air Tester (Millipore). Surfaces samples from the warehouse were collected by swabbing the surfaces of the same indoor sites, using a 10 by 10cm square stencil according to the International Standard ISO 18593 (2004). The obtained swabs were then plated onto MEA. All the collected samples were incubated at 27ºC for 5 to 7 days. After laboratory processing and incubation of the collected samples, quantitative (colony-forming units - CFU/m3 and CFU/m2) and qualitative results were obtained with identification of the isolated fungal species. Aspergillus fumigatus present the highest fungal load and WHO guideline was overcome in both indoor sampling sites. The results obtained in this study highlight the need to know better the exposure burden from dockers, and specifically to fungi contamination.

Otimização de estruturas de destilação azeotrópica com recurso a planeamento experimental

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Prevalence and pathogenicity of Entamoeba histolytica in three different regions of Pernambuco, Northeast Brazil

Parasitological examinations were carried out on 663 individuals of three different cities of Pernambuco State, Northeastern Brazil: Recife, Palmares and Bodocó. The population from a drought area of Pernambuco State, Bodocó, was investigated for amoebiasis and compared with Recife, metropolitan city (about 1.3 million of inhabitants) and another inland community, Palmares, located inside of the sugar-cane plantation region of the State. No evidence of invasive strains of E. histolytica were found in these inhabitants, provided that the isolated zymodemes I, III, IV, VIII, IX, X, XVII and XVIII are recognized as nonpathogenic strains of E. histolytica. Furthermore, the prevalence of intestinal helminths and other protozoan infections showed that these individuals are infected by other agents responsible for diarrhoeal diseases.

Impact of antihelminthic treatment on infection by Ascaris lumbricoides, Trichuris trichiura and hookworms in Covas, a rural community of Pernambuco, Brazil

This work aims to evaluate the impact of drug treatment on infection by Ascaris lumbricoides (Al), Trichuris trichiura (Tt) and hookworms (Hook) in a rural community from the sugar-cane zone of Pernambuco, Brazil. Four parasitological surveys were carried out from March 2001 to March 2002. Individual diagnosis was based on eight slides (four by the Kato-Katz method and four by the Hoffman method) per survey. Infected subjects were assigned to two groups for treatment with either albendazole (n = 62) or mebendazole (n = 57). Prevalence of infection fell significantly (p < 0.05) one month after treatment: Al (from 47.7% to 6.6%); Tt (from 45.7% to 31.8%) and Hook (from 47.7% to 24.5%). One year after treatment, infections by Tt and Hook remained significantly below pre-control levels. A substantial decrease in single-infection cases and multiple infections was found. Egg-negative rate was significant for Al (94.0%), Hook (68.3%) but not for Tt (45.5%), and did not differ significantly between subjects treated with mebendazole or albendazole. Egg counts fell significantly in the individuals remaining positive for Tt. It is recommended that antihelminthic treatment should be selective and given at yearly intervals preferably with albendazole, due to its cost-effectiveness.

Estudo da Delaminação em Compósitos de Epóxido Reforçado com Borracha e Fibras Naturais

Nos últimos anos, a utilização dos materiais compósitos tem vindo a tornar-se cada vez mais comum em várias indústrias, onde se verifica uma ascensão na procura pelos mesmos. Características como o baixo peso aliado à sua alta resistência e rigidez permitem que estes materiais possuam diversas aplicações em variadas áreas, desde a medicina, aeronáutica, indústria automóvel e aeroespacial, até à indústria eletrónica. Hoje em dia, o uso de desperdícios sólidos de borracha e fibras naturais na produção de materiais compósitos é, mais que uma opção, uma necessidade ambiental. De forma a reduzir as enormes quantidades de desperdícios, foi criado um material compósito constituído por uma resina termoendurecível reforçada com esses dois tipos de desperdícios. Parâmetros de fabrico como a percentagem de borracha, o tamanho das partículas de borracha, a percentagem de fibras de cana-de-açúcar e o comprimento dessas fibras foram variados, com o objetivo de estudar a influência destes dois materiais nas propriedades mecânicas do compósito. Apesar da maior parte dos compósitos serem fabricados na forma de uma peça funcional quase pronta a ser utilizada, por vezes é necessário recorrer à maquinação de furos. Apesar das muitas técnicas de furação existentes, os defeitos resultantes deste processo aplicado aos materiais compósitos são ainda muito comuns. Desses defeitos o que mais se destaca é sem dúvida a delaminação. Trinta e seis provetes de epóxido reforçado com borracha e fibra de cana-de-açúcar foram fabricados e furados, de modo a possibilitar o estudo das propriedades mecânicas do material compósito, assim como a análise da zona danificada durante a furação. Diferentes condições de furação, como tipos de broca e velocidades de avanço diferentes, foram impostas aos provetes de forma a variar o mais possível a zona de dano de uns furos para os outros. Parâmetros como a área de dano ou ainda o fator de delaminação provam ser muito úteis na caracterização e quantificação do dano na zona periférica de um furo. Recorrendo a técnicas de processamento de imagem foi possível obter esses parâmetros. O processamento e análise de imagem pode ser feito através de vários métodos. O método utilizado neste trabalho foi o software MATLAB® associado a ferramentas de processamento de imagem. Depois de feita a análise dos furos foram realizados ensaios de esmagamento a todos os provetes. Este passo permitiu assim avaliar de que forma os parâmetros de furação influenciam a resistência mecânica do material, e se a avaliação realizada aos furos é um método viável para a avaliação da extensão de dano nesses furos.

Food waste valorization through the production of polyhydroxyalkanoates by mixed microbial cultures

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Constraint-based modelling of mixed microbial populations: Application to polyhydroxyalkanoates production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Envelhecimento das aguardentes

1 - Colour, by itself, does not constitute a solid ground for judging of the age of a brandy because the more or less pronounced colour it acquires through aging can also be obtained by the addition of oack essence to newly distilled brandy. 2 - Urder the same conditions, colour intensity of a brandy wiU depend upon the nature of the wood and the condition of the storage. 3 - In accordance with the experimental results obtained by the present writers it rests no doubt that fermentation facility ferment resistence, produce and quality of the brendy all are factors depending upon the variety of the sugar cane. In addition, the authors presume that the variety of sugar cane has also influence upon the alteration of composition of the brandy submitted to aging. 4 - All aging phenomena of the brandy are accompanied by volume decreasing, what happens in a slow and continuous manner depending upon storage and environment conditions 5 - During brandy aging the alcoholic degree is greatly af- fected by evaporation, increasing or decreasing in accordance to the hygrometric state of the air and the teriperature in the place where the tuns are stored. 6 - The specific weight of the brandy is inversely proportio- nal to its alcoholic degree, but directly proportional to the extracts since the latter indicates the amount of dissolved residues. 7 - Brandy which shows high specific weight together with high alcoholic degree cannot be considered as aged. It may, however, be takens for brandy artificially coloved in order to conceal its actual age. 8 - The amount of extracts increases with aging, since it is the result of the solvent action of the brandy upon the soluble extractive substances of the wood. Notwithstanding that the extract, considered alone, has no value in determining the age of a brandy, since nothing easier is ohan to nake it change artificially. 9 -During aging the brandy get acidity in physiological as well as in physical way, but never by the action of microorganisms. 10 - The estturs produced during aging by the action of acids upon alcohols are the mean factors of the savour (bouquet) of a brandy and therefore every thing shall be done tor fhr estherification of a preserved brandy being not limited. 11 - Aeration increases esther formation, reduces the aging- time and turn better the taste qualities of the brandy. 12 - Due to the great proportion of high alcohols ordinarily found in the brandy, their analytical discrimination will be greatly important. 13 - The high alcohols are not responsable for the disastrous consequences of the alcoholism, but the high percentage of uthyl alcohol present in the brandy. 14 - The aldehydes appear always in high rate in the brazilian brandys in consequence of some intermediary products of the oxydation of the alcohols being left in the brandys during aging. 15 - The age has little or no influence on the quantity of phurphurol present in a brandy whose amount varies greatly the manner in which the wines to be distilled are treated. Wines centrifugalized or filtered before distillation always give rise to brandys poorer in phurphurol as compared with those distilled without these treatments. 16 - Though greatly variable, brandys of good qualities generally show a high residues coefficient, never under 200 mmg 17 - Lusson - Rocques oxydation coefficient cannot be indis- criminately applied to any brandy class, being, on the contrary, specifically destined to cognacs.

Influência do cloro, sôbre a composição do caldo da cana de açúcar Co 290, aplicado no solo, na forma de cloreto de sódio

Considering the economic importance of the sugar industry among ourselves, the authors carried out a field experiment (Latin square) with Co 290 sugar cane, on a white sandy soil of Piracicaba, State of São Paulo, Brazil, applying NaCl in increasing rates (from 6.8 to 54.5 grams per plant), in order to study the effects of chlorides, on productivity and on the composition of juice. No toxic or stimulating effect was found, and there was no change in yield, in degree of purity of the juice, in general aspect of plants or in colour of leaves and culms. No difference was observed between potassium sulphate or chloride, as source of potash for sugar cane culture. Data collected and the literature cited suggest: (a) that the use of the variety Co 290 is indicated for soils rich in chlorine, such as the saline soils of the North-east and Atlantic Coast of Brazil; (b) that it is necessary to extend studies in Research Institutes and Agricultural Experiment Stations of the country to verify the behaviour of other varieties of sugar cane in the types of soils mentioned, especially with respect their yielding capacity. The authors are already planning such investigations.

Estudo comparativo entre silagem de milho e cana taquara na alimentação suplementar de vacas leiteiras

The A. A. compare corn silage (Zea mays L.) with sugar cane (Saccharum sinensis Roxb.) in the supplementary feeding of dairy cow. Both the feeds were studied in relation to the following points: composition and nutritive value; influence of milk production, milk fat, milk acidity and body weight; cost of production. Both corn silage and sugar cane were analysed by ordinary methods, and their digestibility was determined by means of digestibility coefficients; their composition and nutritive value are, practically, equivalent, but silage showed slight superiority. The feeding experiment was carried out with two groups of six Holstein Friesian cows each, of the Escola Superior de Agricultura "Luiz de Queiroz" herd. Both groups were fed with the same basic concentrates mixture, calculeted according to MORRISON. During the various periods of the experiment, only the roughage supplement varied. The supplementary feeding consisted of 15 kg of chopped sugar cane or corn, silage, per day and per cow, given in two daily meals in the barn. At 4,30 p.m., the cows are set free in the field, where they pass the over night. The experiment was divided into six periods, in which there was a gradative change of the supplementary feeding between the two groups. The milk was weighed every day; the analysis of milk fat and acidity and the weighing of the animals, were made only on the first three days of every week. The analysis of data showed that: a) Milk production was increased significantly by silage feeding; b) The ri was not any influence on milk fat; c) The silage caused higher milk acidity; d) The sugar cane gave a greater increase of body weight. The cost of production of corn silage was 2,12 time higher, than sugar cane, hence, although the silage gave a higher milk production, its use is not economical, compared with sugar cane, in our conditions.

Sôbre os inimigos naturais da lagarta das palmáceas Brassolis sophorae sophorae (L.) (Lep., Brassolidae)

Brassolis sophorae (L.) (Lep., Brassolidae) is an old and important pest of some Brazilian Palmae, among which Cocos nucifera L. and Copemicia cerifera Mart, are the most valuable economically. Eggs are attacked by Anastatus reduvii (Howard) (Eupel-midae) and Telenomus sp. and Telenomus nigrocoxdlis Ashmead (Scelionidae), the larvae being destroyed by Withemia pinguis (F.) (Tachinidae). Six other insects devellop inside the pupae : Xanthozona melanopyga (Wiedmann) and Belvosia sp. (Tachinidae) and the Hymenoptera Brachymeria annulata (F.), B. incerta (Cres-son), Spilochalcis nigrifrons Cameron and S. morleyi Ashmead (Chalcicidae), the last of them being principally treated in this paper. A species of Sarcophagidae (Sarcophaga lambens Wiedmann) was also noted, some flies being gotten from a single pupa. In Piracicaba (State of S. Paulo, Brasil), according to the Author's observations, B. sophorae principal enemy is X. melanopyga, to which our attention has to be directed in a biological fight against the mentioned Brassolidae. The reported Telenomus sp. is also very harmful to B. sophorae eggs. In the whole zone of its distribution, the hosts of B. sophorae caterpillars are Palmae plants, appearing sporadically feeding on banana and sugar cane leaves.

Estudos químico-agrícolas sôbre o enxofre

1. Analyses of soluble sulphates in 2 N ammonium chloride extracts of 24 samples of soils of the state of São Paulo, Brazil, S. A., showed a sulphur content varying from 0,0013 g per 100 g (found in the b layer of a genuine "terra roxa") to 0,007 g per 100 g of soil (b layer of a soil of depression without definite characteristics). (The results are expressed as elemental sulphur). Determinations of total sulphur in 56 samples of soils of the same state using the method of fusion with sodium carbonate and sodium nitrate revealed 0.007 g of elemental S per 100 g of soil as the lowest value (found in several soil types) and 0.096 g as the highest one (found in the b layer of an ar-quean soil). Apparently soluble sulphates accumulate in the upper layers and total sulphur does the opposite. It was found a strong correlation between total S and carbon content. 2. Under laboratory conditions, in a compost of fresh soil, powdered sulphur and apatite, it was verified after a three months period of incubation that the pH value lowered from 6.30 to 3.23; the citric acid solubility of apatite increased to 271.1 per cent of the original one. Lupinus sp. grown in soil manured with sulphur and apatite has showed fresh and dry weights higher than the plants in control pots; the results are significant at 5% level of probability; phosphorus content is also higher in the manured plants. It was observed a net influence of the apatite plus sulphur treatment on the weight of root nodosities that was four times greater than in the control plants. 3. Nearly five hundred determinations of S, N and P were carried out in 35 species of plants cultivated in the state of São Paulo. A great variation in the amounts of these elements was observed. As a general rule, the leaves contain more sulphur than the stems and roots show the lowest percentages. The conjunct roots and stem of guar (Cyamopsis psoraloides) revealed only 0.019 per cent sulphur; the leaves of kale showed the highest sulphur content, i. e., 2.114%. Apparently there is no correlation between the amounts of S, N and P. The ratio S/N increases from 0.006 (guar) to 0.485 (kale). The ratio S/P, always higher than the corresponding S/N, increases from 0.082 (guar) to 6.381 (older leaves of tomato plants). It is interesting to mention that several among the most important crops in the state of São Paulo namely, cotton, rice, coffee and sugar cane contain more sulphur than phosphorus. 4. Tomato plants cultivated in nutrient solution lacking sulphur showed the following visual symptons of deficiency : chlorosis first in the younger leaves and afterwards in all the leaves; anthocyanin pigments in the petioles and stems; absence of fruits; primary roots stunted and secondary ones longer than in the control plants; stems slender, hard, woody. The histological study of petioles suffering from sulphur deficiency revealed anthocyanin in the parenchyme layer instead of clo-rophyll pigments observed in normal petioles; in the chlorotic leaves the large chloroplasts present only the stroma but the small ones have a little amount of green pigments. Chemical analysis revealed in the abnormal plants : less sulphur and an increased proportion of phosphorus; older leaves contain more sulphur and less phosphorus than the younger ones probably due to physiological difficulties in translocation of sulphur bearing material; increased amount of total N attributed to accumulation of nitrates; marked decrease in ash, sugars and starch; increased proportion of crude fiber and dry material. In the plants suffering from sulphur deficiency photosyntetic rate decreased 34 per cent. 5. Tomato plants were succesfully cultivated in nutrient solution in absence of mineral sulphur but in presence of cysteine. The plants absorbed sulphur, under that form and were able to grow up quite well; the fruiting was normal. In this way rested cleary demonstrated the possibility of absorption of organic sulphur without previous mineralization and its utilization in the building up of protein molecules.

As tortas de cacau e de algodão na adubação da cana

This paper deals with a field trial executed to compare cotton seed and cacau meals in the fertilization of sugar cane, variety Co290. The design chosen was a latin square of 6 x 6. The following conclusions can be drawn: 1. Cottonseed meal revealed to be statistically superior to cacau meal, being even superior to the mineral fertilizers plus cacau meal treatment. 2. From an economical point of view cotton seed meal, as a fertilizer for sugar cane, can not be substituted by cacau meal.