The role of manufacturing and market managers in strategy development:lessons from three companies

According to researchers and managers, there is a lack of agreement between marketing and manufacturing managers on critical strategic issues. However, most of the literature on the subject is anecdotal and little formal empirical research has been done. Three companies are investigated to study the extent of agreement/disagreement between manufacturing and marketing managers on strategy content and process. A novel method permits the study of agreement between the two different functional managers on the process of developing strategy. The findings consistently show that manufacturing managers operate under a wider range of strategic priorities than marketing managers, and that manufacturing managers participate less than marketing managers in the strategy development process. Further, both marketing and manufacturing managers show higher involvement in the strategy development process in the latter stages of the Hayes and Wheelwright four-stage model of manufacturing’s strategic role.

Modelling in the evaluation of a manufacturing strategy

This thesis describes research that has developed the principles of a modelling tool for the analytical evaluation of a manufacturing strategy. The appropriate process of manufacturing strategy formulation is based on mental synthesis with formal planning processes supporting this role. Inherent to such processes is a stage where the effects of alternative strategies on the performance of a manufacturing system must be evaluated so that a choice of preferred strategy can be made. Invariably this evaluation is carried out by practitioners applying mechanisms of judgement, bargaining and analysis. Ibis thesis makes a significant and original contribution to the provision of analytical support for practitioners in this role. The research programme commences by defining the requirements of analytical strategy evaluation from the perspective of practitioners. A broad taxonomy of models has been used to identify a set of potentially suitable techniques for the strategy evaluation task. Then, where possible, unsuitable modelling techniques have been identified on the basis of evidence in the literature and discarded from this set. The remaining modelling techniques have been critically appraised by testing representative contemporary modelling tools in an industrially based experimentation programme. The results show that individual modelling techniques exhibit various limitations in the strategy evaluation role, though some combinations do appear to provide the necessary functionality. On the basis of this comprehensive and in-depth knowledge a modelling tool ' has been specifically designed for this task. Further experimental testing has then been conducted to verify the principles of this modelling tool. Ibis research has bridged the fields of manufacturing strategy formulation and manufacturing systems modelling and makes two contributions to knowledge. Firstly, a comprehensive and in-depth platform of knowledge has been established about modelling techniques in manufacturing strategy evaluation. Secondly, the principles of a tool that supports this role have been formed and verified.

Material artifacts:practices for doing strategy with 'stuff'

This paper addresses the dearth of research into material artifacts and how they are engaged in strategizing activities. Building on the strategy-as-practice perspective, and the notion of epistemic objects, we develop a typology of strategy practices that show how managers use material artifacts to strategize by a dual process of knowledge abstraction and substitution. Empirically, we study the practice of underwriting managers in reinsurance companies. Our findings first identify the artifacts – pictures, maps, data packs, spreadsheets and graphs – that these managers use to appraise reinsurance deals. Second, the analysis of each artifact’s situated use led to the identification of five practices for doing strategy with artifacts: physicalizing, locating, enumerating, analyzing, and selecting. Last, we developed a typology that shows how practices vary in terms of their level of abstraction from the physical properties of the risk being reinsured and unfold through a process of substituting. Our conceptual framework extends existing work in the strategy-as-practice field that calls for research into the role of material artifacts.

Seminars and examinations:students' perceptions of the seminar in their examination revision strategy

Students’ performance in examinations is often weaker than in other forms of assessment. Yet it should not be assumed that examination technique is innate or skill based. Successful examination performance calls on students to synthesize information and to demonstrate academic competence. Successful academic performance is primarily concerned with articulatory principles of subject formation and appropriation. However, research into seminars, lectures and examination performances mostly seek to establish a relationship between ‘performance’ and ‘potential’, with much attention focused discretely upon either organizational considerations or the reluctant learner. By emphasizing the social construction of learning situations, this project locates the learning process within a notion of collective social experiences and mutual cooperation. In the broader sense it is interested in questions of meaning and understanding and the process by which concepts are constructed and understood. This process depends on ‘ritualization’, ‘participation frameworks’ and ‘embedding’ (Goffman, 1981). Some students experience difficulties in participating in the ritualized behaviour, which may affect their academic development. By seeking to investigate students’ perception of how they use seminars to develop their academic expertise, this project seeks to contribute to our understanding of the learning process, in particular, the relationship between students’ participation in the examination process and assessment strategies.

Strategic planning as communicative process

This paper examines the construction of a strategic plan as a communicative process. Drawing on Ricoeur’s concepts of decontextualization and recontextualization, we conceptualize strategic planning activities as being constituted through the iterative and recursive relationship of talk and text. Based on an in-depth case study, our findings show how multiple actors engage in a formal strategic planning process which is manifested in a written strategy document. This document is thus central in the iterative talk to text cycles. As individuals express their interpretations of the current strategic plan in talk, they are able to make amendments to the text, which then shape future textual versions of the plan. This cycle is repeated in a recursive process, in which the meanings attributed to talk and text increasingly converge within a final agreed plan. We develop our findings into a process model of the communication process that explains how texts become more authoritative over time and, in doing so, how they inscribe power relationships and social order within organizations. These findings contribute to the literature on strategic planning and on organization as a communication process.

Integrating strategic groups and the resource based perspective:understanding the competitive process

Although the strategic group and resource based perspectives are frequently presented as mutually exclusive, we argue otherwise. The resource based view informs strategic group analysis through a firm's product or service portfolio by offering a richer perspective on strategy and an additional lens for competitive group interpretation. Products act as the locus and bedrock for corporate decisions and form the backbone upon which market strategies are constructed. A "corporate genome" analogy is presented to illustrate how this process occurs within the U.K. pharmaceutical industry. © 2005 Elsevier Ltd. All rights reserved.

Case study as a research strategy : investigating extreme weather resilience of construction SMEs in the UK

Determining an appropriate research methodology is considered as an important element in a research study; especially in a doctoral research study. It involves approach to the entire process of a research study, starting from theoretical underpinnings and spanning to data collection and analysis, and extending to developing the solutions for the problems investigated. Research methodology in essence is focused around the problems to be investigated in a research study and therefore varies according to the problems investigated. Thus, identifying the research methodology that best suits a research in hand is important, not only as it will benefit achieving the set objectives of a research, but also as it will serve establishing the credibility of the work. Research philosophy, approach, strategy, choice, and techniques are inherent components of the methodology. Research strategy provides the overall direction of the research including the process by which the research is conducted. Case study, experiment, survey, action research, grounded theory and ethnography are examples for such research strategies. Case study is documented as an empirical inquiry that investigates a contemporary phenomenon within its real-life context, especially when the boundaries between phenomenon and context are not clearly evident. Case study was adopted as the overarching research strategy, in a doctoral study developed to investigate the resilience of construction Small and Medium-sized Enterprises (SMEs) in the UK to extreme weather events. The research sought to investigate how construction SMEs are affected by EWEs, respond to the risk of EWEs, and means of enhancing their resilience to future EWEs. It is argued that utilising case study strategy will benefit the research study, in achieving the set objectives of the research and answering the research questions raised, by comparing and contrasting with the alternative strategies available. It is also claimed that the selected strategy will contribute towards addressing the call for improved methodological pluralism in construction management research, enhancing the understanding of complex network of relationships pertinent to the industry and the phenomenon being studied.

An integrative approach to developing an intercultural awareness strategy in a multicultural university

Universities are increasingly diverse places; in terms of staff and students, their nationality, ethnicity and religious backgrounds. HEIs need to find ways of ensuring that this diversity adds to the life of the institution and to the development of graduates as employees in a global workplace. The paper offers a case study of one way of developing an intercultural strategy at a UK university. The university concerned has a highly multicultural and multinational staff and student population. Over many years the university has worked to celebrate and embed this diversity into the culture and values of the institution; in its learning, teaching, business operations and relationships. The university wished to develop its intercultural awareness strategy in an inspirational and vibrant way, one which was informed by research and practice. The paper proposes a new integrative approach to developing an intercultural strategy, and summarises some reflections on the process of creating the intercultural awareness strategy which may be of use to other institutions. Analysis showed that in order to make the strategy effective there had to be commitment from senior management to match innovative practices at an individual level. It is also clear that such a strategy must include formal policies and procedures, as well as more informal channels to allow people to express intercultural differences and shared values. The critical role of middle management in strategy implementation is also discussed.

An analysis of the role of soft systems methodology in the change process and the contribution of the facilitator within this process

This research aims to examine the effectiveness of Soft Systems Methodology (SSM) to enable systemic change within local goverment and local NHS environments and to examine the role of the facilitator within this process. Checkland's Mode 2 variant of Soft Systems Methodology was applied on an experimental basis in two environments, Herefordshire Health Authority and Sand well Health Authority. The Herefordshire application used SSM in the design of an Integrated Care Pathway for stroke patients. In Sandwell, SSM was deployed to assist in the design of an Infonnation Management and Technology (IM&T) Strategy for the boundary-spanning Sandwell Partnership. Both of these environments were experiencing significant organisational change as the experiments unfurled. The explicit objectives of the research were: To examine the evolution and development of SSM and to contribute to its further development. To apply the Soft Systems Methodology to change processes within the NHS. To evaluate the potential role of SSM in this wider process of change. To assess the role of the researcher as a facilitator within this process. To develop a critical framework through which the impact of SSM on change might be understood and assessed. In developing these objectives, it became apparent that there was a gap in knowledge relating to SSM. This gap concerns the evaluation of the role of the approach in the change process. The case studies highlighted issues in stakeholder selection and management; the communicative assumptions in SSM; the ambiguous role of the facilitator; and the impact of highly politicised problem environments on the effectiveness of the methodology in the process of change. An augmented variant on SSM that integrates an appropriate (social constructivist) evaluation method is outlined, together with a series of hypotheses about the operationalisation of this proposed method.

Spatial perspective taking is an embodied process, but not for everyone in the same way:differences predicted by sex and social skills score

We re-analysed visuo-spatial perspective taking data from Kessler and Thomson (2010) plus a previously unpublished pilot with respect to individual- and sex differences in embodied processing (defined as body-posture congruence effects). We found that so-called 'systemisers' (males/low-social-skills) showed weaker embodiment than so-called 'embodiers' (females/high-social-skills). We conclude that 'systemisers' either have difficulties with embodied processing or, alternatively, they have a strategic advantage in selecting different mechanisms or the appropriate level of embodiment. In contrast, 'embodiers' have an advantageous strategy of "deep" embodied processing reflecting their urge to empathise or, alternatively, less flexibility in fine-tuning the involvement of bodily representations. © 2012 Copyright Taylor and Francis Group, LLC.

Case study as a research strategy:investigating extreme weather resilience of construction SMEs in the UK

Determining an appropriate research methodology is considered as an important element in a research study; especially in a doctoral research study. It involves approach to the entire process of a research study, starting from theoretical underpinnings and spanning to data collection and analysis, and extending to developing the solutions for the problems investigated. Research methodology in essence is focused around the problems to be investigated in a research study and therefore varies according to the problems investigated. Thus, identifying the research methodology that best suits a research in hand is important, not only as it will benefit achieving the set objectives of a research, but also as it will serve establishing the credibility of the work. Research philosophy, approach, strategy, choice, and techniques are inherent components of the methodology. Research strategy provides the overall direction of the research including the process by which the research is conducted. Case study, experiment, survey, action research, grounded theory and ethnography are examples for such research strategies. Case study is documented as an empirical inquiry that investigates a contemporary phenomenon within its real-life context, especially when the boundaries between phenomenon and context are not clearly evident. Case study was adopted as the overarching research strategy, in a doctoral study developed to investigate the resilience of construction Small and Medium-sized Enterprises (SMEs) in the UK to extreme weather events. The research sought to investigate how construction SMEs are affected by EWEs, respond to the risk of EWEs, and means of enhancing their resilience to future EWEs. It is argued that utilising case study strategy will benefit the research study, in achieving the set objectives of the research and answering the research questions raised, by comparing and contrasting with the alternative strategies available. It is also claimed that the selected strategy will contribute towards addressing the call for improved methodological pluralism in construction management research, enhancing the understanding of complex network of relationships pertinent to the industry and the phenomenon being studied.

Innovation, networking and globalisation:the role of regional innovation systems in the global innovation process

In the global economy, innovation is one of the most important competitive assets for companies willing to compete in international markets. As competition moves from standardised products to customised ones, depending on each specific market needs, economies of scale are not anymore the only winning strategy. Innovation requires firms to establish processes to acquire and absorb new knowledge, leading to the recent theory of Open Innovation. Knowledge sharing and acquisition happens when firms are embedded in networks with other firms, university, institutions and many other economic actors. Several typologies of innovation and firm networks have been identified, with various geographical spans. One of the first being modelled was the Industrial Cluster (or in Italian Distretto Industriale) which was for long considered the benchmark for innovation and economic development. Other kind of networks have been modelled since the late 1970s; Regional Innovation Systems represent one of the latest and more diffuse model of innovation networks, specifically introduced to combine local networks and the global economy. This model was qualitatively exploited since its introduction, but, together with National Innovation Systems, is among the most inspiring for policy makers and is often cited by them, not always properly. The aim of this research is to setup an econometric model describing Regional Innovation Systems, becoming one the first attempts to test and enhance this theory with a quantitative approach. A dataset of 104 secondary and primary data from European regions was built in order to run a multiple linear regression, testing if Regional Innovation Systems are really correlated to regional innovation and regional innovation in cooperation with foreign partners. Furthermore, an exploratory multiple linear regression was performed to verify which variables, among those describing a Regional Innovation Systems, are the most significant for innovating, alone or with foreign partners. Furthermore, the effectiveness of present innovation policies has been tested based on the findings of the econometric model. The developed model confirmed the role of Regional Innovation Systems for creating innovation even in cooperation with international partners: this represents one of the firsts quantitative confirmation of a theory previously based on qualitative models only. Furthermore the results of this model confirmed a minor influence of National Innovation Systems: comparing the analysis of existing innovation policies, both at regional and national level, to our findings, emerged the need for potential a pivotal change in the direction currently followed by policy makers. Last, while confirming the role of the presence a learning environment in a region and the catalyst role of regional administration, this research offers a potential new perspective for the whole private sector in creating a Regional Innovation System.

The Greater London Authority:problems of strategy integration

The Act that established the Greater London Authority (GLA) incorporated many of New Labour's aspirations for modern governance. Among those aspirations was the notion of policy integration, or 'joining up'. The Mayor of Greater London was required to develop a number of strategies, broadly in the planning and environmental policy domains, and to ensure that those strategies meshed into a coherent overall strategy for promoting London's economic, social and environmental well-being. How would this work in practice, given the need for coordination between the GLA and a number of related functional bodies, and given the political imperative for the GLA to make an impact quickly? Through our analysis of the strategy development and integration efforts of the GLA in its first nine months, we have gleaned new insights into the highly complex and difficult process of policy integration. We argue that the high aspirations of the Act for policy integration have not been met, policy integration instead being narrowly interpreted as the coordination of strategies to the Mayor's political agenda. Finally,we reflect on the likelihood of the GLA, as currently constituted, evolving to meet the functional requirement of policy integration.

Modelling in the evaluation of a manufacturing strategy

This thesis describes research that has developed the principles of a modelling tool for the analytical evaluation of a manufacturing strategy. The appropriate process of manufacturing strategy formulation is based on mental synthesis with formal planning processes supporting this role. Inherent to such processes is a stage where the effects of alternative strategies on the performance of a manufacturing system must be evaluated so that a choice of preferred strategy can be made. Invariably this evaluation is carried out by practitioners applying mechanisms of judgement, bargaining and analysis. Ibis thesis makes a significant and original contribution to the provision of analytical support for practitioners in this role. The research programme commences by defining the requirements of analytical strategy evaluation from the perspective of practitioners. A broad taxonomy of models has been used to identify a set of potentially suitable techniques for the strategy evaluation task. Then, where possible, unsuitable modelling techniques have been identified on the basis of evidence in the literature and discarded from this set. The remaining modelling techniques have been critically appraised by testing representative contemporary modelling tools in an industrially based experimentation programme. The results show that individual modelling techniques exhibit various limitations in the strategy evaluation role, though some combinations do appear to provide the necessary functionality. On the basis of this comprehensive and in-depth knowledge a modelling tool ' has been specifically designed for this task. Further experimental testing has then been conducted to verify the principles of this modelling tool. Ibis research has bridged the fields of manufacturing strategy formulation and manufacturing systems modelling and makes two contributions to knowledge. Firstly, a comprehensive and in-depth platform of knowledge has been established about modelling techniques in manufacturing strategy evaluation. Secondly, the principles of a tool that supports this role have been formed and verified.

Modelling in the evaluation of a manufacturing strategy

This thesis describes research that has developed the principles of a modelling tool for the analytical evaluation of a manufacturing strategy. The appropriate process of manufacturing strategy formulation is based on mental synthesis with formal planning processes supporting this role. Inherent to such processes is a stage where the effects of alternative strategies on the performance of a manufacturing system must be evaluated so that a choice of preferred strategy can be made. Invariably this evaluation is carried out by practitioners applying mechanisms of judgement, bargaining and analysis. Ibis thesis makes a significant and original contribution to the provision of analytical support for practitioners in this role. The research programme commences by defining the requirements of analytical strategy evaluation from the perspective of practitioners. A broad taxonomy of models has been used to identify a set of potentially suitable techniques for the strategy evaluation task. Then, where possible, unsuitable modelling techniques have been identified on the basis of evidence in the literature and discarded from this set. The remaining modelling techniques have been critically appraised by testing representative contemporary modelling tools in an industrially based experimentation programme. The results show that individual modelling techniques exhibit various limitations in the strategy evaluation role, though some combinations do appear to provide the necessary functionality. On the basis of this comprehensive and in-depth knowledge a modelling tool ' has been specifically designed for this task. Further experimental testing has then been conducted to verify the principles of this modelling tool. Ibis research has bridged the fields of manufacturing strategy formulation and manufacturing systems modelling and makes two contributions to knowledge. Firstly, a comprehensive and in-depth platform of knowledge has been established about modelling techniques in manufacturing strategy evaluation. Secondly, the principles of a tool that supports this role have been formed and verified.