Sistemi per la climatizzazione mediante pompe di calore geotermiche e pali energetici

We need a large amount of energy to make our homes pleasantly warm in winter and cool in summer. If we also consider the energy losses that occur through roofs, perimeter walls and windows, it would be more appropriate to speak of waste than consumption. The solution would be to build passive houses, i.e. buildings more efficient and environmentally friendly, able to ensure a drastic reduction of electricity and heating bills. Recently, the increase of public awareness about global warming and environmental pollution problems have “finally” opened wide possibility in the field of sustainable construction by encouraging new renewable methods for heating and cooling space. Shallow geothermal allows to exploit the renewable heat reservoir, present in the soil at depths between 15 and 20 m, for air-conditioning of buildings, using a ground source heat pump. This thesis focuses on the design of an air-conditioning system with geothermal heat pump coupled to energy piles, i.e. piles with internal heat exchangers, for a typical Italian-family building, on the basis of a geological-technical report about a plot of Bologna’s plain provided by Geo-Net s.r.l. The study has involved a preliminary static sizing of the piles in order to calculate their length and number, then the project was completed making the energy sizing, where it has been verified if the building energy needs were met with the static solution obtained. Finally the attention was focused on the technical and economical validity compared to a traditional system (cost-benefit analysis) and on the problem of the uncertainty data design and their effects on the operating and initial costs of the system (sensitivity analysis). To evaluate the performance of the thermal system and the potential use of the piles was also used the PILESIM2 software, designed by Dr. Pahud of the SUPSI’s school.

Formazione, apprendimento e nuove prospettive e-learning. Lo sviluppo delle nuove tecnologie didattiche e la creazione di sistemi di apprendimento lungo l’intero arco della vita

The thesis of this paper is based on the assumption that the socio-economic system in which we are living is characterised by three great trends: growing attention to the promotion of human capital; extremely rapid technological progress, based above all on the information and communication technologies (ICT); the establishment of new production and organizational set-ups. These transformation processes pose a concrete challenge to the training sector, which is called to satisfy the demand for new skills that need to be developed and disseminated. Hence the growing interest that the various training sub-systems devote to the issues of lifelong learning and distance learning. In such a context, the so-called e-learning acquires a central role. The first chapter proposes a reference theoretical framework for the transformations that are shaping post-industrial society. It analyzes some key issues such as: how work is changing, the evolution of organizational set-ups and the introduction of learning organization, the advent of the knowledge society and of knowledge companies, the innovation of training processes, and the key role of ICT in the new training and learning systems. The second chapter focuses on the topic of e-learning as an effective training model in response to the need for constant learning that is emerging in the knowledge society. This chapter starts with a reflection on the importance of lifelong learning and introduces the key arguments of this thesis, i.e. distance learning (DL) and the didactic methodology called e-learning. It goes on with an analysis of the various theoretic and technical aspects of e-learning. In particular, it delves into the theme of e-learning as an integrated and constant training environment, characterized by customized programmes and collaborative learning, didactic assistance and constant monitoring of the results. Thus, all the aspects of e-learning are taken into exam: the actors and the new professionals, the virtual communities as learning subjects, the organization of contents in learning objects, the conformity to international standards, the integrated platforms and so on. The third chapter, which concludes the theoretic-interpretative part, starts with a short presentation of the state-of-the-art e-learning international market that aims to understand its peculiarities and its current trends. Finally, we focus on some important regulation aspects related to the strong impulse given by the European Commission first, and by the Italian governments secondly, to the development and diffusion of e-learning. The second part of the thesis (chapters 4, 5 and 6) focus on field research, which aims to define the Italian scenario for e-learning. In particular, we have examined some key topics such as: the challenges of training and the instruments to face such challenges; the new didactic methods and technologies for lifelong learning; the level of diffusion of e-learning in Italy; the relation between classroom training and online training; the main factors of success as well as the most critical aspects of the introduction of e-learning in the various learning environments. As far as the methodological aspects are concerned, we have favoured a qualitative and quantitative analysis. A background analysis has been done to collect the statistical data available on this topic, as well as the research previously carried out in this area. The main source of data is constituted by the results of the Observatory on e-learning of Aitech-Assinform, which covers the 2000s and four areas of implementation (firms, public administration, universities, school): the thesis has reviewed the results of the last three available surveys, offering a comparative interpretation of them. We have then carried out an in-depth empirical examination of two case studies, which have been selected by virtue of the excellence they have achieved and can therefore be considered advanced and emblematic experiences (a large firm and a Graduate School).

Sincronizzazione e condivisione di file system tra sistemi operativi

La necessità di sincronizzare i propri dati si presenta in una moltitudine di situazioni, infatti il numero di dispositivi informatici a nostra disposizione è in continua crescita e, all' aumentare del loro numero, cresce l' esigenza di mantenere aggiornate le multiple copie dei dati in essi memorizzati. Vi sono diversi fattori che complicano tale situazione, tra questi la varietà sempre maggiore dei sistemi operativi utilizzati nei diversi dispositivi, si parla di Microsoft Windows, delle tante distribuzioni Linux, di Mac OS X, di Solaris o di altri sistemi operativi UNIX, senza contare i sistemi operativi più orientati al settore mobile come Android. Ogni sistema operativo ha inoltre un modo particolare di gestire i dati, si pensi alla differente gestione dei permessi dei file o alla sensibilità alle maiuscole. Bisogna anche considerare che se gli aggiornamenti dei dati avvenissero soltanto su di uno di questi dispositivi sarebbe richiesta una semplice copia dei dati aggiornati sugli altri dispositivi, ma che non è sempre possibile utilizzare tale approccio. Infatti i dati vengono spesso aggiornati in maniera indipendente in più di un dispositivo, magari nello stesso momento, è pertanto necessario che le applicazioni che si occupano di sincronizzare tali dati riconoscano le situazioni di conflitto, nelle quali gli stessi dati sono stati aggiornati in più di una copia ed in maniera differente, e permettano di risolverle, uniformando lo stato delle repliche. Considerando l' importanza e il valore che possono avere i dati, sia a livello lavorativo che personale, è necessario che tali applicazioni possano garantirne la sicurezza, evitando in ogni caso un loro danneggiamento, perchè sempre più spesso il valore di un dispositivo dipende più dai dati in esso contenuti che dal costo dello hardware. In questa tesi verranno illustrate alcune idee alternative su come possa aver luogo la condivisione e la sincronizzazione di dati tra sistemi operativi diversi, sia nel caso in cui siano installati nello stesso dispositivo che tra dispositivi differenti. La prima parte della tesi descriverà nel dettaglio l' applicativo Unison. Tale applicazione, consente di mantenere sincronizzate tra di loro repliche dei dati, memorizzate in diversi dispositivi che possono anche eseguire sistemi operativi differenti. Unison funziona a livello utente, analizzando separatamente lo stato delle repliche al momento dell' esecuzione, senza cioè mantenere traccia delle operazioni che sono state effettuate sui dati per modificarli dal loro stato precedente a quello attuale. Unison permette la sincronizzazione anche quando i dati siano stati modificati in maniera indipendente su più di un dispositivo, occupandosi di risolvere gli eventuali conflitti che possono verificarsi rispettando la volontà dell' utente. Verranno messe in evidenza le strategie utilizzate dai suoi ideatori per garantire la sicurezza dei dati ad esso affidati e come queste abbiano effetto nelle più diverse condizioni. Verrà poi fornita un' analisi dettagiata di come possa essere utilizzata l' applicazione, fornendo una descrizione accurata delle funzionalità e vari esempi per renderne più chiaro il funzionamento. Nella seconda parte della tesi si descriverà invece come condividere file system tra sistemi operativi diversi all' interno della stessa macchina, si tratta di un approccio diametralmente opposto al precedente, in cui al posto di avere una singola copia dei dati, si manteneva una replica per ogni dispositivo coinvolto. Concentrando l' attenzione sui sistemi operativi Linux e Microsoft Windows verranno descritti approfonditamente gli strumenti utilizzati e illustrate le caratteristiche tecniche sottostanti.

Progetto di reti Sensori Wireless e tecniche di Fusione Sensoriale

Ambient Intelligence (AmI) envisions a world where smart, electronic environments are aware and responsive to their context. People moving into these settings engage many computational devices and systems simultaneously even if they are not aware of their presence. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. The dependence on a large amount of fixed and mobile sensors embedded into the environment makes of Wireless Sensor Networks one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes, simple devices that typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. In order to handle the large amount of data generated by a WSN several multi sensor data fusion techniques have been developed. The aim of multisensor data fusion is to combine data to achieve better accuracy and inferences than could be achieved by the use of a single sensor alone. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas: Multimodal Surveillance and Activity Recognition. Novel techniques to handle data from a network of low-cost, low-power Pyroelectric InfraRed (PIR) sensors are presented. Such techniques allow the detection of the number of people moving in the environment, their direction of movement and their position. We discuss how a mesh of PIR sensors can be integrated with a video surveillance system to increase its performance in people tracking. Furthermore we embed a PIR sensor within the design of a Wireless Video Sensor Node (WVSN) to extend its lifetime. Activity recognition is a fundamental block in natural interfaces. A challenging objective is to design an activity recognition system that is able to exploit a redundant but unreliable WSN. We present our activity in building a novel activity recognition architecture for such a dynamic system. The architecture has a hierarchical structure where simple nodes performs gesture classification and a high level meta classifiers fuses a changing number of classifier outputs. We demonstrate the benefit of such architecture in terms of increased recognition performance, and fault and noise robustness. Furthermore we show how we can extend network lifetime by performing a performance-power trade-off. Smart objects can enhance user experience within smart environments. We present our work in extending the capabilities of the Smart Micrel Cube (SMCube), a smart object used as tangible interface within a tangible computing framework, through the development of a gesture recognition algorithm suitable for this limited computational power device. Finally the development of activity recognition techniques can greatly benefit from the availability of shared dataset. We report our experience in building a dataset for activity recognition. Such dataset is freely available to the scientific community for research purposes and can be used as a testbench for developing, testing and comparing different activity recognition techniques.

Una rassegna di protocolli di routing per reti radio cognitive ad hoc

Questa tesi si propone di presentare e classificare per caratteristiche simili i protocolli di routing che ad oggi sono utilizzati nelle Cognitive Radio Ad Hoc Networks. Pertanto dapprima nel Capitolo 1 si introdurranno le radio cognitive con i concetti che sono alla base di questa tecnologia e le principali motivazioni che hanno portato alla loro nascita e poi al loro sviluppo. Nel Capitolo 2 si parlerà delle cognitive networks o meglio delle cognitive radio networks, e delle loro peculiarità. Nel terzo e nel quarto capitolo si affronteranno le CRAHNs e in particolare quali sono le sfide a cui devono far fronte i protocolli di routing che operano su di essa, partendo dall'esaminare quali sono le differenze che distinguono questa tipologia di rete da una classica rete wireless ad hoc con nodi in grado di muoversi nello spazio (una MANET). Infine nell'ultimo capitolo si cercherà di classificare i protocolli in base ad alcune loro caratteristiche, vedendo poi più nel dettaglio alcuni tra i protocolli più usati.