Parametrização de modelo para simulação de distribuição de combustíveis em um terminal

A great competition between companies happens nowadays, due to, among other factors, the globalized economic system, the growing consumer demand and the technological advances. This fact implies the need for fast and efficient tools in decision making. A validated simulation model is able to perform this task. Thus, it was parameterized a simulation model of a fuel distribution terminal. It is a complex system because of its great variability. The model´s data input were collected, however the model was not statistically validated, in other word, does not adequately represent the real system. A search was made for the possible causes of this fact: dividing the compartments of tanker trucks, data collection may have been insufficient, inefficient model for unloading of biofuels

Análise de algoritmos computacionais utilizados em sistemas de planejamento de braquiterapia de alta taxa de dose: estudo comparativo com o Código MCNP-5C

In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...

Caracterização e mapeamento da cultura da cana-de-açúcar no município de Rio Claro (SP) por meio de técnicas de sensoriamento remoto e sistemas de informações geográficas

This paper discusses about the use of remote sensing image and processing digital images tools for mapping and assessing the effect on the biomass of the culture of sugar cane in the city of Rio Claro. We used satellite images from CBERS in the passages of 19/04/2009 and 23/09/08, which correspond respectively to the stages where the sugar cane appeared in growing and adult pre-harvest stage. In these images, we applied procedures of digital processing, as the application of the procedures for extending linear contrast, radiometric normalization, Normalized Vegetation Index (NDVI) and pixel by pixel classification by ISOSEG through of the software SPRING. As a result we obtained mapping of the distribution and development stages of the culture of sugar cane in the city of Rio Claro and the mapping of the existing biomass of this culture, showing that the method used to assess the relative effect on biomass in culture of sugar cane was efficient, and that images of low-medium resolution are not the most suitable for the mapping of this culture

XSOFT: estudo de reconhecimento, exploração e prevenção de vulnerabilidades de software através de uma distribuição LINUX

This work aims to give greater visibility to the issue of software security, due to people talk a lot in security conferences, that much of both IT (Information Technology) staff and, more specifically, IS (Information Security) staff does not know this, and, thanks to the spread of the mobile computing and of the cloud computing, this lack of deeper knowledge on this subject is increasingly becoming worrisome. It aims too, make applications to be developed in a security manner, priorizing the security of the information processed. It attempts to demonstrate the secure coding techniques, the principles of software security, the means to identify software vulnerabilities, the cutting-edge software exploitation techniques and the mechanisms of mitigation. Nowadays, the security guys are in charge of the most of the security tests in applications, audits and pentests, and it is undeniable that the so-called security experts, most often come from computer network field, having few experience in software development and programming. Therefore, the development process does not consider the security issue, thanks to the lack of knowledge on the subject by the developer, and the security tests could be improved whether security experts had a greater know-how on application development. Given this problem, the goal here is to integrate information security with software development, spreading out the process of secure software development. To achieve this, a Linux distribution with proof of concept applicati... (Complete abstract click electronic access below)

A prática contemporânea de tradução com auxílio de sistemas de memórias e os limites da responsabilidade do tradutor

This paper analyzes the growing adoption of translation tools by the contemporary translator working for markets such as the localization industry. The fast turnaround pace of translation of electronic texts ends up conditioning the employment of translators to their ability to use the resources provided by tools such as translation memories systems efficiently. These systems, as envisioned in their early conception, would allow users to increase productivity and, simultaneously, standardize their terminological production. Seeking to go beyond the predominantly descriptive approaches of these tools, some theoretical assumptions upholding the use of translation memories are examined. From this perspective, the translator’s involvement with the work in progress is analyzed, mainly when this professional is part of a larger process of production and distribution of information by electronic means and for diverse audiences. Ultimately, the consequences of the employment of these tools are taken into consideration, such as those between translator/translation and translator/client, as well as the extension of the responsibility of the translator dedicated to developing partially automated translations.

Análise da qualidade de energia elétrica proveniente de uma planta solar fotovoltaica conectada à rede de distribuição de energia

Ce document présente l'analyse de la qualité de l'énergie dans une centrale solaire photovoltaïque - avec une capacité installée de 1 MWpico, relié au réseau de distribution d’électricité en 11,9 kV, qui a comme but connaître et également de comparer à la norme nationale actuelle, les effets de la qualité de l'énergie électrique résultant de l'utilisation de cette type matrice génératrice. Le rapport a été basé sur des niveaux spécifiés dans le module 8 des Procédures de distribution d'électricité dans le réseau national d'électricité - PRODIST, qui précise les directrices sur la question de la qualité de l'énergie électrique sur le territoire brésilien. Il a été considéré aussi les recommandations internationales 929 et 1547, qui proposent des pratiques recommandées concernant des systèmes de génération de l'énergie solaire PV (photovoltaïque), et également des normes pour le raccordement de ces types de sources au réseau de distributions d'électricité, tous deux établis par l'Institut des ingénieurs électriciens et électroniciens, largement connu comme IEEE. Le développement et le travail sur le terrain a eu lieu de manière continué, et non dans des moments spécifiques, assurant de cette manière, la fiabilité des données obtenues

Planejamento de reativos em sistemas elétricos de potência multi-área através de modelos estocásticos

Pós-graduação em Engenharia Elétrica - FEIS

A gênese e a distribuição socioespacial das chuvas no município de Ubatuba-SP

This monograph aims to contribute to the understanding and analysis of extreme events and its correlation with anthropogenic actions, in order to understand the levels of human interference in the environment and to identify potential social and environmental damage that such events may result in Ubatuba, located on the northern coast of São Paulo state. Therefore, two strategies were established, on one hand, episodic analysis of extreme weather events, and on the other, the analysis of the impact of atmospheric phenomena in everyday society. In this case we gave greater emphasis to analysis years that had higher total rainfall. In this sense, the research was based on the standard deviation technique and percentages, which supported to characterize the exceptional rainy years, in addition, use of rhythm analysis technique that has helped to identify the active atmospheric systems. From a qualitative point of view, field works were carried out in order to make use of news by the local press and civil defense for years considered extreme (positive standard deviation). From this, it was analyzed how the extreme episodes of rainfall trigger repercussions in geographic space. Also the spatial distribution of rainfall were carried out by means of quantitative analysis of six rain gauges. It was found that the highest occurrences of impacts, are located in the central areas of the city, as well as the highest rainfall totals. In fact, Ubatuba/SP suffers from very high rainfall totals and has a singularity on the climate...

Avaliação da capacidade antioxidante de derivados dos ácidos hidroxibenzoico e hidroxicinâmico, em sistemas-modelo in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribuição Geográfica dos Escorpiões no município de Presidente Prudente - SP nos anos de 2012 e 2013

No Brasil os acidentes por picada de escorpião são considerados um problema para saúde pública, uma vez que este agravo pode levar ao óbito caso não haja um tratamento adequado. Assim, no município de Presidente Prudente/SP o órgão responsável pelo combate aos escorpiões é o Centro de Controle de Zoonoses (CCZ), que tem por finalidade notificar a aparição de escorpiões no município, promovendo portanto, as devidas informações à população com finalidade de evitar acidentes. Desse modo, com o uso dos Sistemas de Informações Geográficas (SIGs) aplicados à técnicas de estatística espacial, foi possível elaborar mapas de distribuição das notificações de escorpiões referente aos anos de 2012 e 2013, por meio dos métodos da geocodificação de endereços; estimador de intensidade de Kernel; índice de Moran função (LISA); quantidade de notificações por setor censitário e interpolação por vizinho mais próximo. Como resultado desta análise, o trabalho fornece informações ao CCZ sobre a distribuição de tal fenômeno para que fosse possível um controle direcionado os locais mais infestados, economizando tempo e recursos financeiros, visando o bem estar da população

Modelação de redes de distribuição de energia elétrica com carregamento não linear, incluindo elementos de regulação e compensação

Pós-graduação em Engenharia Elétrica - FEIS

Efeitos de sistemas de manejo pré-semeadura da soja sobre a dinâmica no solo e eficácia de herbicidas

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Influência da dentina bovina e do dispositivo de microtração na resistência de união de sistemas adesivos

Pós-graduação em Odontologia Restauradora - ICT

Sistemas de retenção O'ring e barra-clipe em overdenture mandibular

The dissatisfaction of the treatment with mandibular complete dentures in edentulous patients has been a constant problem in Dentistry. Often, the absence of stability and retention, resultants of a physiologic condition and alveolar ridge resorption, bring reduction of chewing force, speech problems and social life interference. In these cases, the rehabilitation over osseointegrated implants can be an effective and safe alternative of treatment. When it is not possible to put implants in appropriate number and disposition, it is necessary to make a simple and low costing prosthetic planning, which makes resurge the overdentures. Various implant supported attachment systems for overdentures have been developed in the dental market. Thus, intending to facilitate the professional choice, this study review the literature about attachment systems O’ring and bar- clip in its following aspect: retention level, stress distribution, hygiene complications and patient satisfaction.

Influência da angulação do implante e tipo de intermediário na distribuição das tensões

The aim of this study was to evaluate the influence of implant angulation and abutment type (UCLA and Estheticone) on stress distribution in screw-retained implant-supported prostheses through photoelasticity. Three models were fabricated with photoelastic resin PL-2 (Vishay, Micro-Measurements Group, Inc Raleigh, N.C., USA) containing one external hexagon implant with 3.75x10mm (Master screw, Conexão Sistemas de Prótese Ltda., Arujá, São Paulo) with 0°, 17° and 30° degrees and a screw-retained prostheses with UCLA and Estheticone abutments. The assembly was positioned in a circular polariscope; axial and oblique (45° degrees) loads of 100N were applied in fixed points on the occlusal crown surfaces by a universal testing machine. The stress generated was photographed and analyzed qualitatively with appropriate software (Adobe Photoshop®). The results demonstrated the same number of fringes for both abutment types for each angulation, with fringes increasing in the same way. A higher number of fringes were closer in the oblique loading mode. It was concluded that there was no significant difference in stress distribution in prostheses with UCLA and Estheticone abutments. Higher stress concentrations were observed with increased implant angulation. Stress concentration and intensity were higher in the oblique load than in axial load application.