842 resultados para Sistema do grupo sanguíneo ABO


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The frequency of disseminated candidiasis caused by yeast has enhancing in intensive care unit. Despite the availability of new antifungal drugs, C. albicans sepsis mortality causes can be as high as 30-40%. So, it has been needed to looking for a new therapeutic medicament that helps in treatment and prevention of this infection. Previous data that demonstrated that particulated β-glucan stimulates the immune system and experiments of this work were conducted to investigating if β-glucan extracted from Saccharomices cerevisiae, could modified the evolution of mouse model C. albicans systemic infection. Balb/c mice with sepsis and β-1,3 glucan treated or not were analyzed the influence of β-1,3 glucan in survival of the animals, in the fungal burdens in kidney, in the production of urea and TNF even in the histopathology of kidney. The experiments shown that the infected animals a nd glucan treated had great survival (p<0,05), less unit form colony in kidney and normal levels of urea. In the kidney histopathology of not glucan treated animals it has seen more lesions when compared with treated animals. So we conclude that β-1,3 glucan could stimulate the immune system against disseminated C. albicans

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This Master s Thesis aims to use the theoretical models of growth with restricted balance of payments, specifically Kaldor (1970) and Thirlwall (1979) models, to analyze the behavior and the pattern of specialization of Brazilian exports and imports in the last years. It is observed that, in some periods, the pattern of specialization has contributed in restricting long-term growth of the Brazilian economy. It has been hypothesized that overall this is due to lack of structural transformation policies. To achieve this goal, it analyzed the performance of Brazilian exports and imports disaggregating them according to their technological content. The basis for comparison was a group of countries to which Brazil is inserted in, the BRIC. In this regard, the work is a comparative analysis by using descriptive statistics. It is concluded that the low rate of GDP growth experienced by Brazil since the 1980s can be explained in part by the decoupling of the Brazilian National Innovation System (NIS) and the Brazilian productive structure. This would be reducing the income elasticity of exports and raising imports, causing a pattern of specialization intensive primary commodities and labor and low-skill labor

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This research aims to analyze, in the view of students, the pedagogic project of undergraduate nursing course, of UFRN, and its articulation with the SUS, in an attempt to understand the issues that permeate the teaching and learning of nursing. This is a qualitative study that used the focus group technique as a tool to collect empirical data. There were three meetings, where we had the collaboration of 23 graduating students from the eighth period of the semester 2009.1. For the analysis of information, we use a theoretical framework based on curriculum guidelines and basic principles of the SUS, making the analogy of the results with the metaphor of Greek mythology, Ariadne's thread, in dialogue with authors who discuss education as a transformative practice. Thus, the texture of the yarn was built of five thematic fields: joint the pedagogic project with the SUS; the teaching/service and theory/practice relation; interdisciplinarity or transdisciplinarity; didactic/methodological and relational approaches; and co-participation of students in the pedagogic project. According to the discussions, we find many difficulties in the teaching and learning process of undergraduate nursing in UFRN to strengthen the SUS, including: dislocation of educational institutions with services, professionals, managers and community; dichotomy between theory and practice; reality of services as a learning field and working process in health; posture adopted by professionals, teachers and other subjects included in the process of health education; decontextualization and fragmentation of teaching with the practice in health and nursing; excessive use of very illustrative methodologies, but little problem-solving; difficult and precarious situation in the relations between teachers and between teachers/students, regarding the acceptance of differences; absence of participation of students in the evaluation process and conduct of the educational project in progress. In this sense, we understand the need an auto-reflexive act of teaching and conducting collective pedagogical course with a view to achieving the SUS. Thus, it is necessary to support practices motivated by the polyphonic dialogue and the exercise of symbiosis and autopoiesis of subjects/actors jointly responsible for the ongoing process of learning for life.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

One of the Ministry of Health s attempts at contributing to making collective health more appealing to health students is the Experience and In-Service Training within the Reality of the Unified Health Service Project (VER-SUS). Hence, the object of this investigation is to survey learners views on the teaching of nursing based in the experiences they have lived through in the VER-SUS. Its purpose is to analyze the views and lived-through experiences of nursing students on how the VER-SUS contributed to their professional education. This is a study of the descriptiveexploratory type with a qualitative approach. Eighteen undergraduate students from the nursing program at the Federal University of Rio Grande do Norte (UFRN), former VER-SUS participants, took part in this study, from 2006 to 2009. Information was collected using focus group techniques guided by a set of questions and semistructured interview with open and closed questions. The information collected was analyzed using content analysis technique, of the thematic analysis type. The UFRN Research Ethics Committee approved of the survey pursuant to Report Opinion number 223/2010 and CAAE number 0105.0.051.000-10. Lived-through experiences and in-service training gathered from the VER-SUS have contributed meaningfully to health education, as they helped understand the role of the university and of a health and nursing education within the hegemonic model of education. According to the views and lived-through experiences of nursing students who took part in the SUS project it was extremely relevant to use active methodologies in the teaching-learning process and have the facilitators act as liaisons for the SUS. It follows from this study that the VER-SUS does contribute to a health-nursing education and brings the students close to the reality of the community

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The World Health Organization (WHO) has given special attention to therapeutic procedures other than those practiced in conventional therapy, including homeopathy, phytotherapy, spiritual therapies and prayers, making possible the transition from a mere medicalizating model to a holistic view of the human being. This trend, earmarked in 1978 at the Alma-Ata Conference, questions the ability of technological and specialized medicine to solve the health problems of humankind. In Brazil, the onset of the Brazilian unified health system in 1988, introduced changes in the population s health care model where, within the scope of basic care, emphasis has been given to the Family Health Program since 1994. In this scenery, there is a broad area of complementary practices used in promoting health and preventing and treating diseases to support an understanding of the habits and beliefs underpinning popular practices. The purpose of this study was to analyze the perception users participating in the Peace and Balance group of the Family Health Unit of Nova Cidade, in Natal, Rio Grande do Norte, started in 1999, have of the relationship between the experience of prayer and the changes that may have taken place in their lives after joining the group. It is a case study of descriptive nature and qualitative approach. The data were collected during focus group interviews between January and February 2007, using as tools a questionnaire to describe the research participants and a discussion outline. The theoretical support approached the following: religion and the evolution of thought; complementary health practices; and religion as a complementary health practice. Those interviewed reported, as results of such experience, a reduction in stress and depression, an increase in socialization and self-esteem, improved family interaction, comfort, safety, assurance, improved blood pressure levels and a decrease in the use of antihypertension medication and psychopharmacs. Although most professionals do not consider attention to the religious and spiritual aspects an effective therapeutical complement in health care, its understanding and practice may democratize knowledge and relationships, out of which they can learn how to make health production more effective, strengthening assurance and confidence, and developing and expanding soft technologies aimed at health care promotion and wholeness

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O estudo foi conduzido com os objetivos de analisar o desempenho produtivo e algumas medidas de eficiência reprodutiva de 1877 vacas provenientes de quatro grupos genéticos Holandês ¾ Zebu e estimar os parâmetros genéticos pertinentes. Os animais pertenciam a três rebanhos comerciais que foram monitorados pelo Sistema Computacional de Informação DAISY (The Dairy Information System), durante período de 1989 a 1998. Para consistência dos dados, formação dos arquivos e análises preliminares foram usados os procedimentos disponíveis no SAS (Statistical Analysis System), enquanto os componentes de (co)variância foram estimados pelo método de máxima verossimilhança restrita livre de derivada (MTDFREML), sob um modelo animal. Os efeitos de grupo genético e ano do parto foram significativos sobre a idade da vaca ao primeiro parto (IPC), intervalo parto - primeiro serviço (PP1S), duração da lactação(DL), produção total de leite (PT) e produção de leite por dia de intervalo de parto (PLIEP). As estimativas de herdabilidade (h²) para as características reprodutivas ficaram próximas de zero, evidenciando grande dependência do manejo oferecido aos rebanhos, enquanto o valor de 0,28 para a h² da PT mostrou variância genética aditiva média. A correlação genética entre PT e DL de 0,81 pode ser considerada de alta magnitude.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Os objetivos foram avaliar os efeitos da adição de diferentes concentrações de probiótico (0; 200 e 300mg/kg de ração) em rações de leitões recém desmamados e em diferentes idades de abate, sobre as características do sistema digestório e desempenho zootécnico. Foram utilizados 35 leitões desmamados, distribuídos em delineamento em blocos casualizados em esquema fatorial 3x2+1 (três concentrações de probiótico x duas idades de abate + grupo abatido ao desmame). Foram abatidos cinco leitões no dia da desmama e os demais ao 31º e 41º dia de idade. Foram amostrados segmentos do duodeno e jejuno para a contagem de vilosidades, pesados o pâncreas e fígado e calculado o rendimento de carcaça. Para incidência de diarréia e desempenho, foram utilizados 30 animais e as avaliações foram realizadas nos seguintes períodos: P1- 0 a 10, P2- 11 a 20 e Período Total- 0 a 20 dias pós desmame. Não houve efeito das concentrações do probiótico sobre as características do sistema digestório e a incidência de diarréia, no entanto o ganho de peso e a conversão alimentar foram afetados. Concluiu-se que o ganho de peso e a conversão alimentar de leitões suplementados com 200mg de probiótico/kg de ração foi melhor do que o grupo suplementado com 300mg de probiótico/kg de ração. As diferentes concentrações de probiótico adicionadas na ração de leitões não alteraram as características do sistema digestório, mostrando-se alterações apenas em relação à idade do abate.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The industries are getting more and more rigorous, when security is in question, no matter is to avoid financial damages due to accidents and low productivity, or when it s related to the environment protection. It was thinking about great world accidents around the world involving aircrafts and industrial process (nuclear, petrochemical and so on) that we decided to invest in systems that could detect fault and diagnosis (FDD) them. The FDD systems can avoid eventual fault helping man on the maintenance and exchange of defective equipments. Nowadays, the issues that involve detection, isolation, diagnose and the controlling of tolerance fault are gathering strength in the academic and industrial environment. It is based on this fact, in this work, we discuss the importance of techniques that can assist in the development of systems for Fault Detection and Diagnosis (FDD) and propose a hybrid method for FDD in dynamic systems. We present a brief history to contextualize the techniques used in working environments. The detection of fault in the proposed system is based on state observers in conjunction with other statistical techniques. The principal idea is to use the observer himself, in addition to serving as an analytical redundancy, in allowing the creation of a residue. This residue is used in FDD. A signature database assists in the identification of system faults, which based on the signatures derived from trend analysis of the residue signal and its difference, performs the classification of the faults based purely on a decision tree. This FDD system is tested and validated in two plants: a simulated plant with coupled tanks and didactic plant with industrial instrumentation. All collected results of those tests will be discussed

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The use of graphical objects three-dimensional (3D) multimedia applications is gaining more space in the media. Networks with high transmission rates, computers with large processing and graphics boost and popularize such three-dimensional applications. The areas of 3D applications ranging from military applications, entertainment applications geared up for education. Within the applications related to education, we highlight the applications that create virtual copies of cultural spaces such as museums. Through this copy, you can virtually visit a museum, see other users, communicate, exchange information on works, etc. Thereby allowing the visit museums physically distant remote users. A major problem of such virtual environments is its update. By dealing with various media (text, images, sounds, and 3D models), its subsequent handling and update on a virtual environment requires staff with specialized knowledge. Speaking of museums, they hardly have people on your team with this profile. Inside the GT-MV (Grupo de Trabalho de Museus Virtuais), funded by RNP (Rede Nacional de Ensino e Pesquisa) propose a portal for registration, amendment and seen collaborative virtual museums of Brazil. The update, be it related to work or physical space, a system with a national scale like this, would be impossible if done only by the project team. Within this scenario, we propose the modeling and implementation of a tool that allows editing of virtual spaces in an easy and intuitive as compared with available tools. Within the context of GT-MV, we apply the SAMVC (Sistema de Autoria de Museus Virtuais Colaborativos) to museums where curators build the museum from a 3D floor plan (2D). The system, from these twodimensional information, recreates the equivalent in three dimensions. With this, through little or no training, team members from each museum may be responsible for updating the system

Relevância:

30.00% 30.00%

Publicador:

Resumo:

On this research we investigated how new technologies can help the process of design and manufacturing of furniture in such small manufacturers in Rio Grande do Norte state. Google SketchUp, a 3D software tool, was developed in such a way that its internal structures are opened and can be accessed using SketchUp s API for Ruby and programs written in Ruby language (plugins). Using the concepts of the so-called Group Technology and the flexibility that enables adding new functionalities to this software, it was created a Methodology for Modeling of Furniture, a Coding System and a plugin for Google s tool in order to implement the Methodology developed. As resulted, the following facilities are available: the user may create and reuse the library s models over-and-over; reports of the materials manufacturing process costs are provided and, finally, detailed drawings, getting a better integration between the furniture design and manufacturing process

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this work was developed an information system to apply the concepts of CAD3D-BIM technology for the design activities of the furniture industry. The development of this system was based in an architecture comprised of two modules: a web interface to management the metadata of models from furniture's library and the combination of three-dimensional CAD software with a specific plugin to access the information from this model. To develop this system was also used a Data Base Management System (DBMS) designed to storage the information from models in a hierarchical way, based on concepts of Group Technology (GT). The centralization of information in a single database allows the automatic availability of any changes to all participants involved in a particular project when it‟s happens. Each module from system has its own connection to this database. Finally was developed a prototype from a 3D virtual environment to help create Virtual Reality projects in the web. A study from available technologies to create 3D web applications for execution in websites was done to support this development. The interconnection between modules and the database developed allowed the assembly of a system architecture to support the construction and exhibition of projects of the furniture industry in accordance with the concepts proposed by BIM (Building Information Modeling), using as object of study the furniture industry of state of Rio Grande do Norte

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A podridão de raízes, causada por Pythium aphanidermatum e outras espécies de Pythium, é a principal doença da alface cultivada em sistemas hidropônicos no Brasil. O presente trabalho teve como objetivo avaliar quatro cultivares comerciais de alface em relação à sensibilidade a podridão de raízes, causada por P. aphanidermatum. Os estudos foram realizados em placas de Petri contendo ágar-água com plântulas de alface das cultivares crespa (Vera e Verônica) e lisa (Regina e Elisa), infestadas ou não com o patógeno. Com as mesmas cultivares foram realizados quatro experimentos em sistemas hidropônicos (Nutrient Film Technique), sendo dois em estufa coberta com plástico e sombrite e dois em estufa coberta apenas com plástico. As plântulas, infectadas ou não com P. aphanidermatum, foram transplantadas para os sistemas infestados ou não. Foi avaliada a severidade da doença e o desenvolvimento das plantas. Todas as cultivares foram suscetíveis à podridão de raízes nos experimentos realizados in vitro e in vivo. A presença do sombrite não reduziu a podridão de raízes em cultivares de alface produzidas no sistema hidropônico. A cultivar Regina apresentou maior massa de matéria seca da parte aérea e das raízes, na presença ou ausência do patógeno, sendo a mais indicada para o cultivo hidropônico na época mais quente do ano.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O Sistema ABO foi descoberto em 1900 e permanece até hoje como sendo o sistema mais importante dentro da prática transfusional. A transfusão ABO incorreta pode resultar na morte do paciente, com uma reação hemolítica intravascular, seguida de alterações imunológicas e bioquímicas. Os anticorpos ABO estão presentes nos soros dos indivíduos, dirigidos contra os antígenos A e/ou B ausentes nas hemácias. Embora as transfusões com pequenas quantias de plasmas incompatíveis sejam geralmente consideradas uma prática segura, alguns casos de reações hemolíticas por plasma incompatível são encontrados na literatura. Tendo em vista a pequena quantidade de estudos sobre as hemolisinas anti-A e anti-B e a importância desses anticorpos na prática transfusional, objetivamos neste trabalho verificar a freqüência dessas hemolisinas em doadores de sangue do Hemocentro da Unesp de Botucatu. Foram analisadas 600 amostras de soros de doadores do grupo O para presença ou ausência das hemolisinas anti-A e anti-B. Desses doadores, 77 (12,8%) foram classificados como perigosos por apresentarem em seu soro altos títulos de hemolisinas e 523 (87,2%) como não perigosos por apresentarem baixos títulos. No grupo dos doadores perigosos, 45 (58,4%) foram reativos para hemolisina anti-A, 11 (14,2%) reativos para hemolisina anti-B e 21 (27,2%) reativos para ambas. O título de aglutininas superior a 1/100 já considera o doador O como perigoso. Assim, o teste realizado em nossa rotina é suficiente para detecção de altos títulos fazendo com que os pacientes dos outros grupos sangüíneos não corram o risco de reação transfusional se necessitarem de transfusão sangüínea não-isogrupo.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures