China e a Ásia Central: petróleo, segurança e os Estados Unidos

In the last two decades, the United States have substantially increased their presence in Central Asia. Therefore their presence left China in an uncomfortable position, as China seeks to build a stable and peaceful environment in its near abroad, having under its influence all the countries of Central Asia. One of the ways used by the Chinese government to get closer to the countries of this region is through the oil. Being so, the Chinese oil companies buy rights of exploitation of oil and gas reserves in Central Asia and through this establishes and deepens friendly ties with these countries. This practice became known as oil diplomacy. This new tool of the Chinese government has a double effect: it increases the projection of the Chinese power and dilutes the American influence in the region. In other words, it displeases the United States, and in turn tries to be even more present in Central Asia. The main goal to be worked in this study is how the oil diplomacy increases Chinese influence in Central Asia and dilutes American power in the region. It also aims to explain how the United States uses its presence in Central Asia and on sea lines of communication used to transport oil to contain the Chinese expansion

Avaliação da biodegradação de tolueno por fungos isolados de ambientes associados ao petróleo

Spills can ocurr during oil productive chain and contaminate various environments due to the toxicity of monoaromatics hidrocarbons. Toluene stands out for being agressive to the nervous sistem and teratogenic, with high mobility and solubility in water, which facilitates environmental impact. Studies show that fungi are potential aromatic compounds assimilators, encouraging new researches about its use on the recovery of contaminated sites. This study aimed to select and characterize fungus with potential for biorremediation of toluene. 50 fungi were selected of the Collection of Microorganisms of Interest for Oil Gas and Biofuels, of UNESP Rio Claro, all of which were isolated from sites contaminated with monoaromatic hydrocarbons. Two trials were realized to select the microorganism with greater potential. The first test evaluated fungal growth under toluene saturated atmosphere. 24 fungi were chosen because its greater biomass production to participate in the next trial, the degradation in plates test, where the blue redox agente, DCPIP, indicates the degradation reaction, turning colorless. From this teste was possible to select one isolate which showed higher growth and stronger medium discoloration as the microorganism with the greatest potential to assimilate toluene. The Trichoderma cf. koningii had its potential evaluated through gas cromatography. The experiment proved the efficiency of the methodology, with positives results from the method validation and the effectiveness demonstrated of the LA-PHA-PACK bottles to prevent the volatilization of toluene during the 21 days of experiment. Being reliable its use for monitoring toluene decay associating it with degradation. This results are important because there aren't many methodologies and vials efficient to the purpose of this work. In the present study the degradation rates demonstrated no significant decay of the concentration of hydrocarbon. That may be related to the...

Análise do impacto das políticas de intervenção no setor do agronegócio sobre a cadeia de carne bovina na Venezuela

O objetivo deste trabalho foi analisar o desempenho da cadeia de carne bovina na Venezuela sob o efeito de políticas de intervenção estatal principalmente nas últimas décadas. Para tanto, foi empregada a abordagem teórica do enfoque sistêmico em conjunto com metodologia que se apoiou em um modelo econométrico para explicar o efeito de variáveis tecnológicas e macroeconômicas no agronegócio vis a vis a resultante da produção doméstica de carne bovina nas últimas décadas. Os resultados mostram que, no marco de mudanças institucionais estabelecidas desde a década de 1980 e especialmente as intervenções governamentais vigentes a partir do ano de 2003, a cadeia de carne bovina da Venezuela apresenta um desempenho negocial preocupante e não sustentável. Na última década, a Venezuela decresceu seu inventário bovino a uma taxa média anual de 2,56% entre 2003 e 2014. O número de cabeças/habitante diminuiu a uma taxa anual de 1,30% entre 1960 e 2014, ficando em 0,38 cabeças/habitante. O número de cabeças abatidas sobre o total do rebanho (taxa de desfrute geral do rebanho) foi de 10,82% para o ano de 2014, inferior à média de países vizinhos como Colômbia e Brasil que ficaram em 20,85% e 19,42% respectivamente. A produção doméstica de carne bovina decresceu a uma taxa anual de 2,22% entre 1997 e 2014 (mesmo considerando o abate de bovinos importados). A quantidade de carne oriunda de animais importados cresceu até alcançar um máximo de 58,51% do abate nacional, em 2013. Isto significou um decréscimo real da produção endógena de 71,55% entre os anos de 1997 e 2013. Neste contexto, a produção nacional percapita diminuiu de 18,31 kg/habitante (em 1997) para um mínimo de 3,97 kg/habitante (em 2013). Para o atendimento da demanda doméstica passou-se a contar, crescentemente, com importações de carne in natura que cresceram em volume inicial de 0,59 mil toneladas (t) de equivalente carcaça (em 1997) para um máximo de 307,57 mil t em 2008. A taxa de penetração das importações de carne bovina equivalente (carne e bovinos em pé) resultou em 79,54% do atendimento da demanda doméstica em 2013 (cerca de 15,45 kg/habitante/ano). Neste contexto, as intervenções mais relevantes têm sido a Lei de Terras que propiciou um ambiente de insegurança jurídica; os controles de preços e a política cambial que criaram distorções no mercado; e, a crescente influência nas redes de distribuição de alimentos, com forte dependência do comércio exterior, alavancado com os incrementos no preço internacional do petróleo entre 2003 e 2014. Tudo isto tem resultado em um cenário de desmonte da produção interna da carne bovina, que pode ser visualizado em episódios crescentes de escassez deste produto no mercado interno. Ao final, são sugeridas algumas práticas de políticas pública e setoriais para a reversão desse quadro insustentável para esta importante cadeia de negócios da Venezuela.

FATORES DETERMINANTES DA SOBREVIVÊNCIA DAS MICRO E PEQUENAS EMPRESAS DO SETOR INDUSTRIAL NA CIDADE DE SANTOS

A importância das micro e pequenas empresas na economia brasileira já é sentida desde há muito tempo, pois esse segmento é fundamental na geração de riqueza para a sociedade. Apesar da importância econômica, ainda persiste um elevado grau de descontinuidade nas mesmas, o que lhes outorga dificuldades de transporem os dois primeiros e mais críticos anos de existência. Esta pesquisa visa identificar os fatores determinantes da sobrevivência das micro e pequenas empresas do setor industrial na cidade de Santos. A relevância do estudo se intensifica em decorrência da cidade de Santos estar vivenciando um momento de desenvolvimento econômico impulsionado pelas descobertas de petróleo na camada do pré-sal. Isso poderá aumentar ainda mais o número de criação de MPEs, principalmente no setor industrial, e que provavelmente necessitarão de informações nas quais possam se espelhar. O estudo é de caráter exploratório e descritivo. Os dados foram colhidos por meio de uma pesquisa de campo com aplicação de um questionário baseado em quatro dimensões: empreendedorismo, ambiental, recursos financeiros e organização interna. A pesquisa apresentou como principais fatores de sobrevivência o tempo dedicado à empresa; a adequação dos produtos a demanda; a capacidade de assumir riscos e a liderança do gestor. A amostra de estudo foi definida por conveniência, constituída de MPEs pertencentes ao setor econômico industrial, pois é o mais aderente à cadeia de exploração de petróleo. Foram consideradas as empresas que ultrapassaram os dois primeiros anos de existência, de acordo com os critérios de avaliação de sobrevivência adotado pelo SEBRAE (2011).

ANALISANDO O GRAU DE RELAÇÃO E CORRELAÇÃO ENTRE VARIÁVEIS MACROECONÔMICAS E O SETOR SUCROALCOOLEIRO

O modelo brasileiro de utilização de recursos provenientes de biomassa pode ser considerado como referência na utilização em substituição da matriz energética. Dentre eles o etanol vem se destacando como uma fonte de bioenergia cada vez mais utilizada, principalmente na frota de veículos, tal incentivo vem sendo sedimentado ao longo de quase quatro décadas desde a primeira crise do petróleo com a implantação do PROALCOOL até o desenvolvimento e a aplicação da tecnologia de carros bicombustíveis conhecidos como veículos flex, que hoje representam aproximadamente 90% dos automóveis vendidos. O presente trabalho buscará identificar a existência de uma relação entre os indicadores de produção de automóveis, o aumento de produção de etanol e as variáveis macroeconômicas pelos índices de INCC, IPCA e IGP-M que são amplamente conhecidos e reconhecidos pelo governo, empresários e população. Foi utilizada a técnica multivariada de regressão e correlação com auxilio do oftware SPSS. Os resultados sugerem que existe uma correlação entre os índices macroeconômicos mais baixos e o aumento da produção de automóveis e de etanol.

Estudo das forças capilar, viscosa e gravitacional através de grupos adimensionais na simulação da drenagem gravitacional assistida por gás (GAGD)

The distribution and mobilization of fluid in a porous medium depend on the capillary, gravity, and viscous forces. In oil field, the processes of enhanced oil recovery involve change and importance of these forces to increase the oil recovery factor. In the case of gas assisted gravity drainage (GAGD) process is important to understand the physical mechanisms to mobilize oil through the interaction of these forces. For this reason, several authors have developed physical models in laboratory and core floods of GAGD to study the performance of these forces through dimensionless groups. These models showed conclusive results. However, numerical simulation models have not been used for this type of study. Therefore, the objective of this work is to study the performance of capillary, viscous and gravity forces on GAGD process and its influence on the oil recovery factor through a 2D numerical simulation model. To analyze the interplay of these forces, dimensionless groups reported in the literature have been used such as Capillary Number (Nc), Bond number (Nb) and Gravity Number (Ng). This was done to determine the effectiveness of each force related to the other one. A comparison of the results obtained from the numerical simulation was also carried out with the results reported in the literature. The results showed that before breakthrough time, the lower is the injection flow rate, oil recovery is increased by capillary force, and after breakthrough time, the higher is the injection flow rate, oil recovery is increased by gravity force. A good relationship was found between the results obtained in this research with those published in the literature. The simulation results indicated that before the gas breakthrough, higher oil recoveries were obtained at lower Nc and Nb and, after the gas breakthrough, higher oil recoveries were obtained at lower Ng. The numerical models are consistent with the reported results in the literature

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)

Avaliação do potencial das fibras de Ceiba Pentandra (Kapok) e Calotropis Procera como adsorventes de petróleo

On the basis of human evolution and the population increase was necessary, the emergence of new sources of energy, the development of new products and technologies. One such product, object of the industry revolution and of great importance to the development of humanity is the oil, a substance composed primarily of hydrocarbons which give rise to several other products as fuels, lubricants, polymers, solvents, cooking gas, asphalt for roads, fertilizers, medicines, paints, among other. However, mishandling this product may cause leaks and spills that generate huge damages to the environment and the economy. Soon, with the purpose of contributing to decrease is problematic, in this master's work was carried out an intensive search of the possible potential of the fibers of Ceiba pentandra (L.) "Kapok" and Calotropis Procera as bioadsorbents of petroleum in water. The choice of these fibers is due to surface properties such as oleophylics and hydrophobic, their buoyancy and yet, being biodegradable natural polymers derived from the Brazilian Northeast. This research was used experimental planning with response surface methodology (RSM) with the software Design Expert. The results were statistically efficient, obtaining a R2= 0.9995 for Calotropis Procera and a R2= 0.9993 for Kapok. And that, both fibers showed adsorption efficiency, removing more than 80% petroleum in water static and dynamic state.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Estudo da injeção de água e gás em um reservatório com características do pré-sal brasileiro

The pre-salt province is composed by large amounts of light oil and with good quality, a reality that puts Brazil in a strategic position facing the great demand for energy worldwide. In this province are the largest discoveries in the world in the last ten years; areas as Libra, Franco and Lula field, everyone containing volumes greater than 8 billion recoverable oil barrels. To develop and optimize the production of these fields, a study was done for choosing the improved oil recovery methods. The main motivations were the presence of carbon dioxide (CO2) as a contaminant and the strategic decision of do not discard it, combined with high GOR (gas-oil ratio) of the reservoir fluid. The method should take advantage of the unique abundant resources: seawater and produced gas. This way, the process of matching these resources in the water alterning gas injection (WAG) became a good option. In this master’s dissertation, it was developed a reservoir model with average characteristics of the Brazilian pre-salt, where was applied the improved oil recovery method of water alternating gas. The production of this reservoir was analyzed by parameters as: the first fluid injected in the injection process, position of the injection wells completion, injection water and gas rate and cycle time. The results showed a good performance of the method, with up to 26% of gains in the recovery factor regarding the primary recovery, since the application of water injection and gas, individually, was not able to overcome 10 % of gain. The most influential parameter found in the results was the cycle time, with higher recovery factor values obtained with the use of shorter times.

Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico

LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.

SISAL - Um sistema supervisório para elevação artificial de petróleo

MEDEIROS, Adelardo A. D. et al. SISAL - Um Sistema Supervisório para Elevação Artificial de Petróleo. In: Rio Oil and Gas Expo Conference, 2006, Rio de Janeiro, RJ. Anais... Rio de Janeiro, 2006.

Sustentabilidade das empresas associadas à REDEPETRO-RN

The present study investigated the management of social, environmental and economic sustainability practices employed by 72 oil companies in Rio Grande do Norte state in Brazil associated to Joint Business Network for Enhancing the Competitive Ability of Suppliers of Goods and Services to the Gas and Oil Industry in Rio Grande do Norte (REDEPETRO-RN). Thus, our investigation aimed to determine the extent to which sustainability practices of companies associated to REDEPETRO-RN are developed through their own efforts or influenced by the Triple Helix interorganizational arrangement (governamental organizations, education and research institutions, and industries). The research instrument used was a questionnaire in order to map and characterize the sustainability practices. The research subjects were business owners and managers. The data collected supported the descriptive, correspondence and correlation analyzes. Were identified a greater emphasis of the companies surveyed in developing sustainability practices and greater economic influence of business organizations in the construction of sustainability status. It was concluded with confirmation of thesis of the REDEPETRO-RN arrangement exhibits the characteristics and functioning of a common Interorganizational Cooperative Arrangement, not those of a triple helix interorganizational arrangement, given that the influences exerted for the development of social, environmental and economical sustainability on the part of teaching and research institutions, and government and business organizations do not interact with one another sufficiently to create a virtuous circle of cooperation among the associated companies. By contrast, the Interorganizational Cooperative Arrangement plays an important role in strengthening the competitiveness of companies affiliated to REDEPETRO-RN, by combining different competencies in an attempt at supporting the adoption of sustainability practices, a role reinforced by the scope of PETROBRAS, which, due to its economic importance, has considerable weight in the managerial decisions of associated companies