Food insecurity among Australian children : potential determinants, health and developmental consequences

Children in food-insecure households may be at risk of poor health, developmental or behavioural problems. This study investigated the associations between food insecurity, potential determinants and health and developmental outcomes among children. Data on household food security, socio-demographic characteristics and children’s weight, health and behaviour were collected from households with children aged 3–17 years in socioeconomically disadvantaged suburbs by mail survey using proxy-parental reports (185 households). Data were analysed using logistic regression. Approximately one-in-three households (34%) were food insecure. Low household income was associated with an increased risk of food insecurity [odds ratio (OR), 16.20; 95% confidence interval (CI), 3.52–74.47]. Children with a parent born outside of Australia were less likely to experience food insecurity (OR, 0.42; 95% CI, 0.19–0.93). Children in food-insecure households were more likely to miss days from school or activities (OR, 3.52; 95% CI, 1.46–8.54) and were more likely to have borderline or atypical emotional symptoms (OR, 2.44; 95% CI, 1.11–5.38) or behavioural difficulties (OR, 2.35; 95% CI, 1.04–5.33). Food insecurity may be prevalent among socioeconomically disadvantaged households with children. The potential developmental consequences of food insecurity during childhood may result in serious adverse health and social implications.

Sustainable Road Management in Texas : network-level flexible pavement structural condition analysis using data mining techniques

The research team recognized the value of network-level Falling Weight Deflectometer (FWD) testing to evaluate the structural condition trends of flexible pavements. However, practical limitations due to the cost of testing, traffic control and safety concerns and the ability to test a large network may discourage some agencies from conducting the network-level FWD testing. For this reason, the surrogate measure of the Structural Condition Index (SCI) is suggested for use. The main purpose of the research presented in this paper is to investigate data mining strategies and to develop a prediction method of the structural condition trends for network-level applications which does not require FWD testing. The research team first evaluated the existing and historical pavement condition, distress, ride, traffic and other data attributes in the Texas Department of Transportation (TxDOT) Pavement Maintenance Information System (PMIS), applied data mining strategies to the data, discovered useful patterns and knowledge for SCI value prediction, and finally provided a reasonable measure of pavement structural condition which is correlated to the SCI. To evaluate the performance of the developed prediction approach, a case study was conducted using the SCI data calculated from the FWD data collected on flexible pavements over a 5-year period (2005 – 09) from 354 PMIS sections representing 37 pavement sections on the Texas highway system. The preliminary study results showed that the proposed approach can be used as a supportive pavement structural index in the event when FWD deflection data is not available and help pavement managers identify the timing and appropriate treatment level of preventive maintenance activities.

Reconstructing the event stratigraphy from the complex structural - stratigraphic architecture of an Archaean volcanic – intrusive – sedimentary succession : the Boorara Domain, Eastern Goldfields Superterrane, Western Australia

Two main deformational phases are recognised in the Archaean Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, Yilgarn Craton, Western Australia, primarily involving southover- north thrust faulting that repeated and thickened the stratigraphy, followed by east northeast – west-southwest shortening that resulted in macroscale folding of the greenstone lithologies. The domain preserves mid-greenschist facies metamorphic grade, with an increase to lower amphibolite metamorphic grade towards the north of the region. As a result of the deformation and metamorphism, individual stratigraphic horizons are difficult to trace continuously throughout the entire domain. Volcanological and sedimentological textures and structures, primary lithological contacts, petrography and geochemistry have been used to correlate lithofacies between faultbounded structural blocks. The correlated stratigraphic sequence for the Boorara Domain comprises quartzo-feldspathic turbidite packages, overlain by high-Mg tholeiitic basalt (lower basalt), coherent and clastic dacite facies, intrusive and extrusive komatiite units, an overlying komatiitic basalt unit (upper basalt), and at the stratigraphic top of the sequence, volcaniclastic quartz-rich turbidites. Reconstruction of the stratigraphy and consideration of emplacement dynamics has allowed reconstruction of the emplacement history and setting of the preserved sequence. This involves a felsic, mafic and ultramafic magmatic system emplaced as high-level intrusions, with localised emergent volcanic centres, into a submarine basin in which active sedimentation was occurring.

Effective discrimination of acoustic emission source signals for structural health monitoring

Acoustic emission (AE) is the phenomenon where stress waves are generated due to rapid release of energy within a material caused by sources such as crack initiation or growth. AE technique involves recording the stress waves by means of sensors and subsequent analysis of the recorded signals to gather information about the nature of the source. Though AE technique is one of the popular non destructive evaluation (NDE) techniques for structural health monitoring of mechanical, aerospace and civil structures; several challenges still exist in successful application of this technique. Presence of spurious noise signals can mask genuine damage‐related AE signals; hence a major challenge identified is finding ways to discriminate signals from different sources. Analysis of parameters of recorded AE signals, comparison of amplitudes of AE wave modes and investigation of uniqueness of recorded AE signals have been mentioned as possible criteria for source differentiation. This paper reviews common approaches currently in use for source discrimination, particularly focusing on structural health monitoring of civil engineering structural components such as beams; and further investigates the applications of some of these methods by analyzing AE data from laboratory tests.

Assessment of “change in flexibility method” in structural health monitoring systems

The modern structural diagnosis process is rely on vibration characteristics to assess safer serviceability level of the structure. This paper examines the potential of change in flexibility method to use in damage detection process and two main practical constraints associated with it. The first constraint addressed in this paper is reduction in number of data acquisition points due to limited number of sensors. Results conclude that accuracy of the change in flexibility method is influenced by the number of data acquisition points/sensor locations in real structures. Secondly, the effect of higher modes on damage detection process has been studied. This addresses the difficulty of extracting higher order modal data with available sensors. Four damage indices have been presented to identify their potential of damage detection with respect to different locations and severity of damage. A simply supported beam with two degrees of freedom at each node is considered only for a single damage cases throughout the paper.

Analysis of acoustic emission data for accurate damage assessment for structural health monitoring applications

Structural health monitoring (SHM) refers to the procedure used to assess the condition of structures so that their performance can be monitored and any damage can be detected early. Early detection of damage and appropriate retrofitting will aid in preventing failure of the structure and save money spent on maintenance or replacement and ensure the structure operates safely and efficiently during its whole intended life. Though visual inspection and other techniques such as vibration based ones are available for SHM of structures such as bridges, the use of acoustic emission (AE) technique is an attractive option and is increasing in use. AE waves are high frequency stress waves generated by rapid release of energy from localised sources within a material, such as crack initiation and growth. AE technique involves recording these waves by means of sensors attached on the surface and then analysing the signals to extract information about the nature of the source. High sensitivity to crack growth, ability to locate source, passive nature (no need to supply energy from outside, but energy from damage source itself is utilised) and possibility to perform real time monitoring (detecting crack as it occurs or grows) are some of the attractive features of AE technique. In spite of these advantages, challenges still exist in using AE technique for monitoring applications, especially in the area of analysis of recorded AE data, as large volumes of data are usually generated during monitoring. The need for effective data analysis can be linked with three main aims of monitoring: (a) accurately locating the source of damage; (b) identifying and discriminating signals from different sources of acoustic emission and (c) quantifying the level of damage of AE source for severity assessment. In AE technique, the location of the emission source is usually calculated using the times of arrival and velocities of the AE signals recorded by a number of sensors. But complications arise as AE waves can travel in a structure in a number of different modes that have different velocities and frequencies. Hence, to accurately locate a source it is necessary to identify the modes recorded by the sensors. This study has proposed and tested the use of time-frequency analysis tools such as short time Fourier transform to identify the modes and the use of the velocities of these modes to achieve very accurate results. Further, this study has explored the possibility of reducing the number of sensors needed for data capture by using the velocities of modes captured by a single sensor for source localization. A major problem in practical use of AE technique is the presence of sources of AE other than crack related, such as rubbing and impacts between different components of a structure. These spurious AE signals often mask the signals from the crack activity; hence discrimination of signals to identify the sources is very important. This work developed a model that uses different signal processing tools such as cross-correlation, magnitude squared coherence and energy distribution in different frequency bands as well as modal analysis (comparing amplitudes of identified modes) for accurately differentiating signals from different simulated AE sources. Quantification tools to assess the severity of the damage sources are highly desirable in practical applications. Though different damage quantification methods have been proposed in AE technique, not all have achieved universal approval or have been approved as suitable for all situations. The b-value analysis, which involves the study of distribution of amplitudes of AE signals, and its modified form (known as improved b-value analysis), was investigated for suitability for damage quantification purposes in ductile materials such as steel. This was found to give encouraging results for analysis of data from laboratory, thereby extending the possibility of its use for real life structures. By addressing these primary issues, it is believed that this thesis has helped improve the effectiveness of AE technique for structural health monitoring of civil infrastructures such as bridges.

Structural performance of reinforced concrete beams repairing from spalling

The effectiveness of a repair work for the restoration of spalled reinforced concrete (r.c.) structures depends to a great extent, on their ability to restore the structural integrity of the r.c. element, to restore its serviceability and to protect the reinforcements from further deterioration. This paper presents results of a study concocted to investigate the structural performance of eight spalled r.c. beams repaired using two advanced repair materials in various zones for comparison purposes, namely a free flowing self compacting mortar (FFSCM) and a polymer Modified cementitious mortar (PMCM). The repair technique adopted was that for the repair of spalled concrete in which the bond between the concrete and steel was completely lost due to reinforcement corrosion or the effect of fire or impact. The beams used for the experiment were first cast, then hacked at various zones before they were repaired except for the control beam. The beam specimens were then loaded to failure under four point loadings. The structural response of each beam was evaluated in terms of first crack load, cracking behavior, crack pattern, deflection, variation of strains in the concrete and steel, collapse load and the modes of failure. The results of the test showed that, the repair materials applied on the various zones of the beams were able to restore more than 100% of the beams’ capacity and that FFSCM gave a better overall performance.

Teachers’ detecting and reporting child abuse and neglect : research into the determinants of complex professional behavior

Child abuse and neglect is prevalent and entails significant costs to children, families and society. Teachers are responsible for significant proportions of official notifications to statutory child protection agencies. Hence, their accurate and appropriate reporting is crucial for well-functioning child protection systems. Approximately one-quarter of Australian teachers indicate never detecting a case of child maltreatment across their careers, while a further 13-15% admit to not reporting suspected cases in some circumstances. The detection and reporting of child abuse and neglect are complex decision-making behaviors, influenced by: the nature of the maltreatment itself; the characteristics of the teacher; the school environment; and the broader legislative and policy environment. In this chapter, the authors provide a background to teachers’ involvement in detecting and reporting child abuse and neglect, and an overview of the role of teachers is provided. Results are presented from three Australian studies that examine the unique contributions of: case; teacher; and contextual characteristics to detection and reporting behaviors. The authors conclude by highlighting the key implications for enhancing teacher training in child abuse and neglect, and outline future research directions.

Traffic-related fine and ultrafine particle exposures of professional drivers and illness : An opportunity to better link exposure science and epidemiology to address an occupational hazard?

Exposures to traffic-related air pollution (TRAP) can be particularly high in transport microenvironments (i.e. in and around vehicles) despite the short durations typically spent there. There is a mounting body of evidence that suggests that this is especially true for fine (b2.5 μm) and ultrafine (b100 nm, UF) particles. Professional drivers, who spend extended periods of time in transport microenvironments due to their job, may incur exposures markedly higher than already elevated non-occupational exposures. Numerous epidemiological studies have shown a raised incidence of adverse health outcomes among professional drivers, and exposure to TRAP has been suggested as one of the possible causal factors. Despite this, data describing the range and determinants of occupational exposures to fine and UF particles are largely conspicuous in their absence. Such information could strengthen attempts to define the aetiology of professional drivers' illnesses as it relates to traffic combustion-derived particles. In this article, we suggest that the drivers' occupational fine and UF particle exposures are an exemplar case where opportunities exist to better link exposure science and epidemiology in addressing questions of causality. The nature of the hazard is first introduced, followed by an overview of the health effects attributable to exposures typical of transport microenvironments. Basic determinants of exposure and reduction strategies are also described, and finally the state of knowledge is briefly summarised along with an outline of the main unanswered questions in the topic area.

Spot the differences in traditional and social entrepreneurial intention : highlighting the role of human and social capital

There is general agreement in the scientific community that entrepreneurship plays a central role in the growth and development of an economy in rapidly changing environments (Acs & Virgill 2010). In particular, when business activities are regarded as a vehicle for sustainable growth at large, that goes beyond mere economic returns of singular entities, encompassing also social problems and heavily relying on collaborative actions, then we more precisely fall into the domain of ‘social entrepreneurship’(Robinson et al. 2009). In the entrepreneurship literature, prior studies demonstrated the role of intentionality as the best predictor of planned behavior (Ajzen 1991), and assumed that the intention to start a business derives from the perception of desirability and feasibility and from a propensity to act upon an opportunity (Fishbein & Ajzen 1975). Recognizing that starting a business is an intentional act (Krueger et al. 2000) and entrepreneurship is a planned behaviour (Katz & Gartner 1988), models of entrepreneurial intentions have substantial implications for intentionality research in entrepreneurship. The purpose of this paper is to explore the emerging practice of social entrepreneurship by comparing the determinants of entrepreneurial intention in general versus those leading to startups with a social mission. Social entrepreneurial intentions clearly merit to be investigated given that the opportunity identification process is an intentional process not only typical of for profit start-ups, and yet there is a lack of research examining opportunity recognition in social entrepreneurship (Haugh 2005). The key argument is that intentionality in both traditional and social entrepreneurs during the decision-making process of new venture creation is influenced by an individual's perceptions toward opportunities (Fishbein & Ajzen 1975). Besides opportunity recognition, at least two other aspects can substantially influence intentionality: human and social capital (Davidsson, 2003). This paper is set to establish if and to what extent the social intentions of potential entrepreneurs, at the cognitive level, are influenced by opportunities recognition, human capital, and social capital. By applying established theoretical constructs, the paper draws comparisons between ‘for-profit’ and ‘social’ intentionality using two samples of students enrolled in Economy and Business Administration at the University G. d’Annunzio in Pescara, Italy. A questionnaire was submitted to 310 potential entrepreneurs to test the robustness of the model. The collected data were used to measure the theoretical constructs of the paper. Reliability of the multi-item scale for each dimension was measured using Cronbach alpha, and for all the dimensions measures of reliability are above 0.70. We empirically tested the model using structural equation modeling with AMOS. The results allow us to empirically contribute to the argument regarding the influence of human and social cognitive capital on social and non-social entrepreneurial intentions. Moreover, we highlight the importance for further researchers to look deeper into the determinants of traditional and social entrepreneurial intention so that governments can one day define better polices and regulations that promote sustainable businesses with a social imprint, rather than inhibit their formation and growth.