Heat treatment enhances the antimicrobial activity of (+)-Catechin when combined with copper sulphate

The aim of the study was to compare the antimicrobial activities of freshly-made, heat-treated (HT), and 14 d stored (+)-Catechin solutions with (+)-catechin flavanol isomers in the presence of copper sulphate. (+)-Catechin activity was investigated when combined with different ratios of Cu2+; 100°C heat treatment; autoclaving; and 14 d storage against Staphylococcus aureus. Cu2+-(+)-Catechin complexation, isomer structure-activity relationships, and H2O2 generation were also investigated. Freshly-made, HT, and 14d stored flavanols showed no activity. Whilst combined Cu2+-autoclaved (+)-Catechin and -HT(+)-Catechin activities were similar, HT(+)-Catechin was more active than either freshly-made (+)-catechin (generating more H2O2) or (-)-Epicatechin (though it generated less H2O2) or 14d-(+)-Catechin (which had similar activity to Cu2+ controls - though it generated more H2O2). When combined with Cu2+, in terms of rates of activity, HT(+)-Catechin was lower than (-)-Epigallocatechin gallate and greater than freshly-made (+)-Catechin. Freshly-made and HT(+)-Catechin formed acidic complexes with Cu2+ as indicated by pH and UV-vis measurements although pH changes did not account for antimicrobial activity. Freshly-made and HT(+)-Catechin both formed Cu2+ complexes. The HT(+)-Catechin complex generated more H2O2 which could explain its higher antimicrobial activity.

Impact of palm date consumption on microbiota growth and large intestinal health: a randomised, controlled, cross-over, human intervention study

The reported inverse association between the intake of plant-based foods and a reduction in the prevalence of colorectal cancer may be partly mediated by interactions between insoluble fibre and (poly)phenols and the intestinal microbiota. In the present study, we assessed the impact of palm date consumption, rich in both polyphenols and fibre, on the growth of colonic microbiota and markers of colon cancer risk in a randomised, controlled, cross-over human intervention study. A total of twenty-two healthy human volunteers were randomly assigned to either a control group (maltodextrin-dextrose, 37·1 g) or an intervention group (seven dates, approximately 50 g). Each arm was of 21 d duration and was separated by a 14-d washout period in a cross-over manner. Changes in the growth of microbiota were assessed by fluorescence in situ hybridisation analysis, whereas SCFA levels were assessed using HPLC. Further, ammonia concentrations, faecal water genotoxicity and anti-proliferation ability were also assessed using different assays, which included cell work and the Comet assay. Accordingly, dietary intakes, anthropometric measurements and bowel movement assessment were also carried out. Although the consumption of dates did not induce significant changes in the growth of select bacterial groups or SCFA, there were significant increases in bowel movements and stool frequency (P<0·01; n 21) and significant reductions in stool ammonia concentration (P<0·05; n 21) after consumption of dates, relative to baseline. Furthermore, date fruit intake significantly reduced genotoxicity in human faecal water relative to control (P<0·01; n 21). Our data indicate that consumption of date fruit may reduce colon cancer risk without inducing changes in the microbiota.

High-throughput phenotyping (HTP) identifies seedling root traits linked to variation in seed yield and nutrient capture in field-grown oilseed rape (Brassica napusL.)

Background and Aims Root traits can be selected for crop improvement. Techniques such as soil excavations can be used to screen root traits in the field, but are limited to genotypes that are well-adapted to field conditions. The aim of this study was to compare a low-cost, high-throughput root phenotyping (HTP) technique in a controlled environment with field performance, using oilseed rape (OSR; Brassica napus) varieties. Methods Primary root length (PRL), lateral root length and lateral root density (LRD) were measured on 14-d-old seedlings of elite OSR varieties (n = 32) using a ‘pouch and wick’ HTP system (∼40 replicates). Six field experiments were conducted using the same varieties at two UK sites each year for 3 years. Plants were excavated at the 6- to 8-leaf stage for general vigour assessments of roots and shoots in all six experiments, and final seed yield was determined. Leaves were sampled for mineral composition from one of the field experiments. Key Results Seedling PRL in the HTP system correlated with seed yield in four out of six (r = 0·50, 0·50, 0·33, 0·49; P < 0·05) and with emergence in three out of five (r = 0·59, 0·22, 0·49; P < 0·05) field experiments. Seedling LRD correlated positively with leaf concentrations of some minerals, e.g. calcium (r = 0·46; P < 0·01) and zinc (r = 0·58; P < 0·001), but did not correlate with emergence, general early vigour or yield in the field. Conclusions Associations between PRL and field performance are generally related to early vigour. These root traits might therefore be of limited additional selection value, given that vigour can be measured easily on shoots/canopies. In contrast, LRD cannot be assessed easily in the field and, if LRD can improve nutrient uptake, then it may be possible to use HTP systems to screen this trait in both elite and more genetically diverse, non-field-adapted OSR.

COLOR STABILITY OF DENTAL CERAMICS SUBMITTED TO ARTIFICIAL ACCELERATED AGING AFTER REPEATED FIRINGS

Statement of problem. Color stability is an important factor to ensure the long-term clinical success of ceramic restorations. There is a lack of information on how color is affected by fabrication procedures, such as the number of firings. Purpose. The purpose of this study was to evaluate the effects that the number of firings and type of substrate have on the color stability of dental ceramic submitted to artificial accelerated aging. Material and methods. Sixty specimens were fabricated: 30 metal ceramic (Verabond II + IPS d.SIGN) and 30 all-ceramic (IPS d.SIGN). Specimens were divided into 3 groups (n=10), and submitted to 2, 3, or 4 firings (+/- 900 degrees C), respectively, according to the manufacturer`s instructions. Color readings were obtained with a spectro photometer before and after artificial accelerated aging, and L*, a*, and b* coordinates and total color variation (Delta E) were analyzed (2-way ANOVA, Bonferroni, (alpha=05). Results. For metal ceramic specimens, differences for the L* coordinates were significant (P<.05) only for the group submitted to 3 firings. With respect to the all-ceramic specimens, smaller L* coordinates were obtained for greater a* and b* coordinates, indicating that the greater the number of firings, the darker and more reddish/yellowish the specimen. All Delta E values, for all groups, were below 1.0. All-ceramic specimens submitted to 3 and 4 firings presented Delta E means differing statistically (P<.05) from those of the metal ceramic group. Conclusions. The type of substrate and number of firings affected the color stability of the ceramic material tested. Artificial accelerated aging did not produce perceptible color stability changes (Delta E<1.0). (J Prosthet Dent 2009-101:13-18)

Mobilization of seed reserves during germination of four tropical species of the Amazon Rainforest

Seed reserve mobilization during germination of the Amazonian species Myciaria dubia (camu-camu), Eugenia stipitata(araca-boi), Dipteryx odorata (cumaru) and Hymenaea courbaril (jatoba) was evaluated. Seeds were placed in germination chambers at 30 degrees C with it 12 h photoperiod. Analysis of primary metabolites (carbohydrates, lipids and proteins) and fatty acid composition were carried out in quiescent seeds and at four germination stages after radicle protrusion. Germination was high in all species but there were statistically significant differences between species. Differences were also observed with regard to the duration of the germination period. The seeds showed variation in the content and composition of the analyzed compounds. indicating that the mobilization rates of these compounds may affect germination velocity.

Luminescence characteristics of YAP:Ce scintillator powders and composites

Cerium doped yttrium aluminate perovskite YAlO(3) (YAP) powders are pursued as interesting alternatives to bulk crystals for application in scintillating devices. The emissions of these materials in the near-UV and visible spectral regions originate from electric dipole transitions between 4f and 5d energy levels of Ce(3+) and largely depend on the environment occupied by the ion. In search for improved synthesis conditions that can lead to phase pure powders with optimized structural and spectroscopic characteristics, in this work we have employed the polymeric precursor (Pechini) method to prepare crystalline and amorphous YAP:Ce powders doped with 1-10 mol% Ce(3+). Interesting composite materials were also obtained by dispersing some of the YAP:Ce powders in silica xerogels. A comparative structural and spectroscopic study of all the samples was done by XRD, FT-IR, emission, excitation and excited state lifetime measurements. In agreement with previous reports, excitation at 296 nm results in intense emission in the range 315-425 nm with an average decay time of 30 ns. (c) 2010 Elsevier B.V. All rights reserved.

Thermochronology of central Ribeira Fold Belt, SE Brazil: Petrological and geochronological evidence for long-term high temperature maintenance during Western Gondwana amalgamation

The studied sector of the central Ribeira Fold Belt (SE Brazil) comprises metatexites, diatexites, charnockites and blastomylonites. This study integrates petrological and thermochronological data in order to constrain the thermotectonic and geodynamic evolution of this Neoproterozoic-Ordovician mobile belt during Western Gondwana amalgamation. New data indicate that after an earlier collision stage at similar to 610 Ma (zircon, U-Pb age), peak metamorphism and lower crust partial melting, coeval with the main regional high grade D(1) thrust deformation, occurred at 572-562 Ma (zircon, U-Pb ages). The overall average cooling rate was low (<5 degrees C/Ma) from 750 to 250 degrees C (at similar to 455 Ma; biotite-WR Rb-Sr age), but disparate cooling paths indicate differential uplift between distinct lithotypes: (a) metatexites and blastomylonites show a overall stable 3-5 degrees C/Ma cooling rate; (b) charnockites and associated rocks remained at T>650 degrees C during sub-horizontal D(2) shearing until similar to 510-470 Ma (garnet-WR Sm-Nd ages) (1-2 degrees C/Ma), being then rapidly exhumed/cooled (8-30 degrees C/Ma) during post-orogenic D(3) deformation with late granite emplacement at similar to 490 Ma (zircon, U-Pb age). Cooling rates based on garnet-biotite Fe-Mg diffusion are broadly consistent with the geochronological cooling rates: (a) metatexites were cooled faster at high temperatures (6 degrees C/Ma) and slowly at low temperatures (0.1 degrees C/Ma), decreasing cooling rates with time; (b) charnockites show low cooling rates (2 degrees C/Ma) near metamorphic peak conditions and high cooling rates (120 degrees C/Ma) at lower temperatures, increasing cooling rates during retrogression. The charnockite thermal evolution and the extensive production of granitoid melts in the area imply that high geothermal gradients were sustained fora long period of time (50-90 Ma). This thermal anomaly most likely reflects upwelling of asthenospheric mantle and magma underplating coupled with long-term generation of high HPE (heat producing elements) granitoids. These factors must have sustained elevated crustal geotherms for similar to 100 Ma, promoting widespread charnockite generation at middle to lower crustal levels. (C) 2010 Elsevier B.V. All rights reserved.

Potential oscillations in a proton exchange membrane fuel cell with a Pd-Pt/C anode

We report in this paper the occurrence of potential oscillations in a proton exchange membrane fuel cell (PEMFC) with a Pd-Pt/C anode, fed with H(2)/100 ppm CO, and operated at 30 degrees C. We demonstrate that the use of Pd-Pt/C anode enables the emergence of dynamic instabilities in a PEMFC. Oscillations are characterized by the presence of very high oscillation amplitude, ca. 0.8 V. which is almost twice that observed in a PEMFC with a Pt-Ru/C anode under similar conditions. The effects of the H(2)/CO flow rate and cell current density on the oscillatory dynamics were investigated and the mechanism rationalized in terms of the CO oxidation and adsorption processes. We also discuss the fundamental aspects concerning the operation of a PEMFC under oscillatory regime in terms of the benefit resulting from the higher average power output. (c) 2010 Elsevier B.V. All rights reserved.

Handbok för kombinerade sol- och biovärmesystem : Teknik - System - Ekonomi

Handboken beskriver olika solfångarkonstruktioner och solvärmekretsens ingående komponenter och ger en grundlig inblick i ackumulatortankens konstruktion och funktion. I boken finns förslag på systemutformning, olika tekniska lösningar och hur systemen bör styras och regleras. Handboken beskriver i första hand utformning-lösning-styrning av kombinationen sol- och pelletsvärme, men tar även upp solvärme i kombination med vedpannor, värmedrivna vitvaror och värmepumpar. Värmesystem med vattenburen värme är utmärkta att kombinera med solvärme, men det är i de flesta fall enklare att få till bra lösningar vid nyinstallation, än vid komplettering av befintlig anläggning. När solvärme och pelletsvärme ska kombineras finns det många alternativ till systemutformning. Det är viktigt att vattenburna pelletssystem utformas korrekt och kombineras på rätt sätt med solvärme för att komforten ska bli hög och elanvändningen låg. Vattenmantlade pelletskaminer med ett vattenburet värmesystem är extra intressant i kombination med solvärme. När eldningen upphör i samband med att värmebehovet avtar kan solvärmen ta över. En generell slutsats är att konventionella svenska pelletspannor med inbyggd varmvattenberedning inte är lämpliga i kombination med solvärmesystem. Den typen av bränslepannor ger komplicerade systemlösningar, höga värmeförluster och det är svårt att åstadkomma en tillräckligt bra temperaturskiktning i ackumulatortanken om varmvattenberedning sker i pannan. Solvärme för varmvattenberedning kan vara ett enkelt och bra komplement till pelletskaminer som genererar varmluft. För solvärmesystem är det viktigt att kraftig temperaturskiktning erhålls när värmelagret laddas ur. Det betyder att ackumulatortankens (eller varmvattenberedarens) nedre vattenvolym ska kylas ner till temperaturer som ligger nära ingående kallvattentemperatur. Ackumulatortankens mellersta del bör kylas till samma temperatur som radiatorreturen. Vid design av solfångarkretsen måste överhettning och stagnation kunna klaras utan risk för glykolnedbrytning eller andra skador på värmebärare eller rörkrets (och andra komponenter i kretsen). Partiell förångning minskar risken för att glykolen skadas då solfångaren når höga stagnationstemperaturer. Solfångarens glykolblandning tillåts koka (förångas) på ett kontrollerat sätt så att endast ånga blir kvar i solfångaren. Vätskevolymen i solfångaren samlas upp i ett större expansionskärl och systemet återfylls när vätskan kondenserar. Dränerande solfångarsystem med enbart vatten är ett möjligt alternativ till konventionella solfångare. De kräver en större noggrannhet vid installationen, så att sönderfrysning undviks. Dränerande systemlösningar är relativt ovanliga i Sverige. Om solfångaren under senhöst-vinter-tidig vår kan arbeta med att förvärma kallvatten från 10 till 20 ºC erhålls en betydligt bättre verkningsgrad på solfångaren (och framför allt ökar värmeutbytet då drifttimmarna ökar väsentligt) än om radiatorreturen (som i bästa fall ligger på temperaturnivån 30 - 40 ºC) ska förvärmas. Därför bör radiatorreturen placeras en bra bit upp från botten i ackumulatortanken och tappvarmvattnet ska förvärmas i en slinga som börjar i tankens botten. Om det finns ett VVC-system måste systemet anslutas på ett speciellt sätt så att ackumulatortankens temperaturskiktning inte störs. En viktig parameter vid ackumulatortankens utformning är att värmeförlusterna hålls låga. Det är viktigt för att klara tappvarmvattenlasten med solvärme under mulna perioder sommartid (men också för att hålla energianvändningen låg). I moderna hus, där ackumulatortanken i regel placeras i bostaden, blir det en komfortfråga att undvika övertemperaturer i det rum där värmelagret placeras. En bra standard på isoleringen (med minimerade värmeförluster) kräver att det finns ett lufttätt skikt över hela isoleringen som dessutom sluter tätt mot röranslutningar. Ofrivillig självcirkulation i anslutande kretsar som kan kyla av och blanda om ackumulatortankens vattenvolym, bör förhindras med backventiler och nedböjning av rören i isolerskiktet eller direkt utanför tanken.

Physiological dose response of coffee (Coffea arabica L.) plants to glyphosate depends on growth stage

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preferência alimentar de adultos de Diabrotica speciosa (Germar) (Coleoptera: Chrysomelidae) por genótipos de batata (Solanum spp.)

Avaliou-se a preferência alimentar de adultos de Diabrotica speciosa (Germar), pelos genótipos de batata Achat, Baronesa, Monalisa, N 140-201 e NYL 235-4. Foram realizados ensaios com e sem chance de escolha, em laboratórios e em casa de vegetação, na FCAV/UNESP, Jaboticabal, SP. em dois testes utilizaram-se discos de folíolos provenientes de plantios em vaso (plantas com 40 dias); em outros seis semelhantes (exceção ao genótipo N 140-201) foram utilizados discos de folíolos provenientes de plantio de campo (plantas com 30, 50 e 70 dias). Nas placas de Petri (repetições) foram liberados dois adultos/disco. Dois outros ensaios foram efetuados em gaiolas (sem chance de escolha), no interior de casa de vegetação, com plantas com 15 e 45 dias de idade, liberando-se três e 10 adultos/planta respectivamente, avaliando-se o consumo de área foliar quatro e cinco dias após. Nos testes em laboratório com material de vaso, o genótipo NYL 235-4 (com e sem chance) foi o menos consumido (1,08 a 1,12 mg de peso seco). Com material de campo (com e sem chance), o peso de matéria fresca consumida pela praga foi menor em NYL 235-4 (médias de 26,2 e 66,1 mg) e Baronesa (30,2 e 57,9 mg). Nos ensaios em gaiolas (sem chance) também verificou-se menor consumo em NYL 235-4 (3,35 cm² e 16,70 cm²/planta). Esses resultados revelam que o genótipo NYL 235-4 apresenta resistência do tipo não-preferência para alimentação em relação a D. speciosa.

Características produtivas e imunológicas de frangos de corte submetidos a dietas suplementadas com cromo, criados sob diferentes condições de ambiente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Substrate and Temperature Effects on the Germination of Dypsis leptocheilos (Hodel) Beentje & J. Dransf. (Arecaceae) Seeds

Dypsis leptocheilos is highly valued as an ornamental palm. Its propagation is done by seeds; however, there is little information about this process. The objective of this work was to study the substrate and temperature effects on the germination of D. leptocheilos seeds. The experiments were carried out at FCAV/UNESP, Campus of Jaboticabal, São Paulo State, Brazil. In order to study the substrate effects, four treatments were arranged (coconut fiber, sand, vermiculite and Plantmax (R)) at 30 degrees C. For the temperature effects, six treatments were performed (temperature at laboratory conditions (21.5 degrees C and 72% RU), 25 degrees C, 30 degrees C, 35 degrees C, 20-30 degrees C and 25-35 degrees C), having the coconut fiber as the substrate. The experimental design was completely randomized, with four replicates of 25 disseminules per plot (seeds with attached endocarp). Water replacement was managed to maintain 100% of the retention capacity of the substrates. The germination tests were observed every two days, and conducted over 148 days for the substrate effects, and over 152 days for the temperature effects, when no more seed germination was noted. In order to determine the germination percentage (% G) and the Germination Speed Index (GSI), the seed was considered germinated when the germinative button appeared. At the end of the experiments, leaf area (cm(2)), root and shoot length (cm), root and shoot dry mass (g) were also obtained. Statistical analysis was performed and means were compared by the Tukey test. Germination rate and speed in coconut fiber was higher at 25 and 30 degrees C. However, when other substrates were tested at 30 degrees C, the highest germination percentage was observed in vermiculite, which also sustained better results for the seed germination and for the characteristics related to shoots and roots.

Temperatura e substrato para a germinação de sementes de Piptadenia moniliformis Benth.

In germination tests, substrate and ideal temperature are important for providing favorable conditions for the germination of seeds and the eventual development of seedlings. This research aimed at evaluating the effects of temperature and substrate on the germination of Piptadenia moniliformis Benth seeds. Two trials were done. In the first, seeds were submitted to germination under constant temperatures of 5 to 40 degrees C (increases of 5 degrees C) and alternated temperatures of 20-25, 25-30, 30-35, 20-30, 25-35 and 20-35 degrees C on paper. In the second trial, temperatures of 25, 20-30 e 20-35 degrees C were used in the substrates on (OP) and between paper (BP), on (OS) and between sand (BS), on (0V) and between vermiculite (BV) and paper roll (PR). The following traits were evaluated: percentage of seeds with protrusion of primary root and normal seedlings; speed germination index; length of primary root and of the hypocotyls and the dry mass of seedlings. A completely randomized design was used with 14 treatments. In the first experiment and a factorial scheme of 7 x 3 (7 substrates and 3 temperatures) was used in the second with four replicates of 25 seeds each. In the first experiment the constant temperatures of 25 e 30 degrees C and the alternated of 20-30 e 20-35 degrees C provided best results for the germination of seeds. In the second, the temperature of 25 C associated with the substrates BP, BS and BV surpassed the other treatments proving adequate for carrying out the germination tests of Piptadenia moniliformis Benth seeds.

Effects of energy and protein levels on egg quality and performance of laying hens at early second production cycle

One hundred sixty-two commercial 70-wk-old ISA Brown laying hens, previously subjected to induced molting by feed restriction, were distributed in a completely randomized design with 3 x 3 factorial arrangement (i.e., 3 metabolizable energy levels: 2,850; 2,950, and 3,050 kcal of ME/kg) and 3 protein levels (16, 18, and 20% CP), which totaled 9 treatments with 3 replicates of 6 birds each. Experimental diets were offered to birds after the feed restriction period. Performance and egg quality parameters were evaluated in 14-d intervals from the 4th to 12th weeks after forced molting for a total of 4 evaluation periods. Increases in dietary energy and protein levels did not improve performance or egg quality. The levels of 2,850 kcal of ME and 16% protein were sufficient for laying hens starting the second production cycle without decreasing their performance or egg quality.