998 resultados para Remoção de cabelo


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Aquicultura - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Melanin is a very important pigment to human species, and besides defining skin, eyes and hair color, it is also involved in sun exposure protection. This pigment is classified into two subtypes: pheomelanin, which is responsible for lighter pigmentation and eumelanin, the dark pigment related. Due to this type of melanin variation it is possible to found different phenotypes of hair and skin color. The genetics MC1R variations are described as the most important for diversity in pigmentation, and this gene is directly related to the complex process of melanin synthesis. The use of these variations to phenotype prediction using genetic information has been used in Europe countries to infer physical features from biological samples, with the purpose of directing searches of criminal suspects and victims identification. The aim of this study was to analyze 8 major MC1R polymorphisms in a sample of Brazilian individuals. Analyzing 91 individuals, we observed with higher frequencies the polymorphisms rs1805005:G>T, rs2228479:G>A and rs885479:G>A, which are related to skin and hair colors, as previously showed in literature. These data suggest the possibility of predicting phenotype from genetic polymorphisms in Brazilian population. However it will be necessary to analyze a larger number of individuals to be able to confirm these associations and to perform a more detailed statistical analysis

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo do presente estudo foi verificar o efeito da adição de um prebiótico nas características de crescimento, resistência às condições do trato gastrintestinal e remoção de colesterol in vitro, das cepas de Enterococcus faecium CRL183 e Lactobacillus helveticus 416. A fonte de prebiótico foi composta por Inulina GR – Orafti, sendo testadas as seguintes concentrações: 1,0%, 2,0%, 3,0%; 4,0%; 5,0% e 6,0% p/v). Para a avaliação da resistência às condições do trato gastrintestinal, os microrganismos foram colocados em contato com um fluido gástrico simulado por 2 horas (9g/L de NaCl, 3g/L de pepsina, pH 1,8) e com um fluido intestinal simulado por 3 horas (0,9g/L de pancreatina, 12,5g/L de bicarbonato de sódio e 6,0 g/L de Oxgall). Após o período de contato com os fluidos, foram realizadas diluições seriais e plaqueamento em meios específicos. No estudo de redução de colesterol, meios de cultura contendo inulina e colesterol (1%) foram inoculados com as cepas probióticas e incubados em anaerobiose a 37°C/24h. A capacidade de redução do colesterol foi determinada pela diferença entre a concentração de colesterol adicionada ao meio de cultura e a de colesterol residual. Os resultados foram submetidos à análise de variância e teste de médias de Tukey (p≤0,05). A adição de inulina não resultou em alteração no ciclo logarítmico de crescimento dos microrganismos. Porém, quando os dados foram submetidos à análise estatística, constatou-se que a adição de 1% a 4% de inulina inibiu o crescimento de Lactobacillus helveticus 416, sendo que para as concentrações de 5% a 6% estas alterações não foram perceptíveis. A cepa de Enterococcus faecium CRL 183 apresentou crescimento superior na presença de 2% e 4% de inulina. Após o contato com o fluido gástrico simulado, observou-se redução de 1 ciclo logarítmico no crescimento da cepa... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aimed to develop a biological system for removal of ammonia nitrogen operating at low concentrations of dissolved oxygen. Thus, a biological upflow vertical reactor was built, in which the affluent pass through the support media until the top. Sludge from an anaerobic stabilization pond of a slaughterhouse unit in the city of Presidente Prudente - SP was used as inoculum. Initially the system operated in batch and afterwards in a continuous flow with different HRT. For feeding the reactor, an initial phases was adopted a synthetic culture media, described by Martins (2007), in order to establish the ideal conditions for the development of Anammox bacteria and subsequently, submitted to the system a slugde effluent of slaughterhouse. The results showed significant removal efficiency of N-NH4+, especially in the phase without recirculation of culture media, with an average of 71% removal, with the proportion of removal of N-NH4 +:N-NO2- average 1: 1,69. For the period of operation with effluent from the slaughterhouse, were not obtained satisfactory results, without confirmation of the proliferation of Anammox bacteria in the system, due to the high presences of organic matter in the same confirmed by high concentrations of COD

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Civil - FEIS