An experimental investigation of the heat transfer from a buoyant gas plume to a horizontal unobstructed ceiling

This thesis presents an experimental investigation of the axisymmetric heat transfer from a small scale fire and resulting buoyant plume to a horizontal, unobstructed ceiling during the initial stages of development. A propane-air burner yielding a heat source strength between 1.0 kW and 1.6 kW was used to simulate the fire, and measurements proved that this heat source did satisfactorily represent a source of buoyancy only. The ceiling consisted of a 1/16" steel plate of 0.91 m. diameter, insulated on the upper side. The ceiling height was adjustable between 0.5 m and 0.91 m. Temperature measurements were carried out in the plume, ceiling jet, and on the ceiling.

Heat transfer data were obtained by using the transient method and applying corrections for the radial conduction along the ceiling and losses through the insulation material. The ceiling heat transfer coefficient was based on the adiabatic ceiling jet temperature (recovery temperature) reached after a long time. A parameter involving the source strength Q and ceiling height H was found to correlate measurements of this temperature and its radial variation. A similar parameter for estimating the ceiling heat transfer coefficient was confirmed by the experimental results.

This investigation therefore provides reasonable estimates for the heat transfer from a buoyant gas plume to a ceiling in the axisymmetric case, for the stagnation region where such heat transfer is a maximum and for the ceiling jet region (r/H ≤ 0.7). A comparison with data from experiments which involved larger heat sources indicates that the predicted scaling of temperatures and heat transfer rates for larger scale fires is adequate.

Cloud computing services for seismic networks

This thesis describes a compositional framework for developing situation awareness applications: applications that provide ongoing information about a user's changing environment. The thesis describes how the framework is used to develop a situation awareness application for earthquakes. The applications are implemented as Cloud computing services connected to sensors and actuators. The architecture and design of the Cloud services are described and measurements of performance metrics are provided. The thesis includes results of experiments on earthquake monitoring conducted over a year. The applications developed by the framework are (1) the CSN --- the Community Seismic Network --- which uses relatively low-cost sensors deployed by members of the community, and (2) SAF --- the Situation Awareness Framework --- which integrates data from multiple sources, including the CSN, CISN --- the California Integrated Seismic Network, a network consisting of high-quality seismometers deployed carefully by professionals in the CISN organization and spread across Southern California --- and prototypes of multi-sensor platforms that include carbon monoxide, methane, dust and radiation sensors.

Makrelen- und Holzmakrelenfänge stimmen zuversichtlich

In order to determine the abundance of incoming year classes of both mackerel and horse mackerel a couple of research vessels in the frame of ICES investigats waters west of the British Isles, the Gulf of Biscay and areas west of the Iberian Peninsula in the first half of each third year. In 1995, Germany took place in these investigations with R.V. "Walther Herwig III" from March 23 to April 18. A total of 100 plankton stations were made using a Gulf - III - Sampier between Fastnet Rock and the Gironde estuary. In addition, 87 fishing stations were occupied by a GOV net. Though fish indications were not fished on purpose large amounts of especially horse mackerel and mackerel were gained in the half hour tows. Besides, boarfish (Capros aper L.), blue whiting, and sprat were found in considerable quantities and numbers in some areas. The hydrographc situation was as expected: The development of a surfaee thermocline created by radiation indieates the collapse of the vertically homogeneous situation of the winter period.

Lightweight deformable mirrors for future space telescopes

This thesis presents a concept for ultra-lightweight deformable mirrors based on a thin substrate of optical surface quality coated with continuous active piezopolymer layers that provide modes of actuation and shape correction. This concept eliminates any kind of stiff backing structure for the mirror surface and exploits micro-fabrication technologies to provide a tight integration of the active materials into the mirror structure, to avoid actuator print-through effects. Proof-of-concept, 10-cm-diameter mirrors with a low areal density of about 0.5 kg/m² have been designed, built and tested to measure their shape-correction performance and verify the models used for design. The low cost manufacturing scheme uses replication techniques, and strives for minimizing residual stresses that deviate the optical figure from the master mandrel. It does not require precision tolerancing, is lightweight, and is therefore potentially scalable to larger diameters for use in large, modular space telescopes. Other potential applications for such a laminate could include ground-based mirrors for solar energy collection, adaptive optics for atmospheric turbulence, laser communications, and other shape control applications.

The immediate application for these mirrors is for the Autonomous Assembly and Reconfiguration of a Space Telescope (AAReST) mission, which is a university mission under development by Caltech, the University of Surrey, and JPL. The design concept, fabrication methodology, material behaviors and measurements, mirror modeling, mounting and control electronics design, shape control experiments, predictive performance analysis, and remaining challenges are presented herein. The experiments have validated numerical models of the mirror, and the mirror models have been used within a model of the telescope in order to predict the optical performance. A demonstration of this mirror concept, along with other new telescope technologies, is planned to take place during the AAReST mission.

Gasificación de biomasa con astillas de madera.

[ES]Este proyecto tiene como objetivo generar energía eléctrica y térmica para un conjunto de viviendas aisladas, sin acceso a la red eléctrica, con una potencia requerida de 12KW. Se pretende plantear una solución que satisfaga las necesidades básicas de auto-abastecimiento de una forma económicamente rentable. Para comenzar, por un lado de cara al objetivo 20/20/20 se realizará un acercamiento a la utilización de las energías renovables como fuente de energía, disminuyendo así el impacto ambiental. Por otro lado, se plantearán diferentes alternativas para la generación de energía eléctrica y térmica, finalmente haciendo hincapié en el estudio de una planta de gasificación de biomasa mediante astillas de madera. De modo que, a lo largo de este documento se analizarán los principios y fundamentos necesarios para el diseño de una planta de generación eléctrica mediante gasificación de biomasa. Para ello se estudiarán los diferentes modelos de gasificadores existentes, el desarrollo del proceso de gasificación con sus respectivas etapas y la limpieza y adaptación del gas obtenido antes de introducirlo en el MACI. Se realizará una descripción de la planta junto al dimensionamiento tanto del almacenamiento de la materia prima como el de los equipos a instalar. Finalmente, para valorar si se trata de un proyecto viable. Se realizará el estudio económico analizando el presupuesto y análisis de rentabilidad. Asimismo, se plantearán los diferentes riesgos a los que puede exponerse una instalación como esta.

Helmholtz Fermi surface harmonics: an efficient approach for treating anisotropic problems involving Fermi surface integrals

We present a new efficient numerical approach for representing anisotropic physical quantities and/or matrix elements defined on the Fermi surface (FS) of metallic materials. The method introduces a set of numerically calculated generalized orthonormal functions which are the solutions of the Helmholtz equation defined on the FS. Noteworthy, many properties of our proposed basis set are also shared by the FS harmonics introduced by Philip B Allen (1976 Phys. Rev. B 13 1416), proposed to be constructed as polynomials of the cartesian components of the electronic velocity. The main motivation of both approaches is identical, to handle anisotropic problems efficiently. However, in our approach the basis set is defined as the eigenfunctions of a differential operator and several desirable properties are introduced by construction. The method is demonstrated to be very robust in handling problems with any crystal structure or topology of the FS, and the periodicity of the reciprocal space is treated as a boundary condition for our Helmholtz equation. We illustrate the method by analysing the free-electron-like lithium (Li), sodium (Na), copper (Cu), lead (Pb), tungsten (W) and magnesium diboride (MgB2)

Confiabilidade de diferentes métodos de aquisição de modelos dentários digitais

O uso de modelos de estudo dentários faz parte tanto da prática quanto da pesquisa odontológica e ortodôntica. Com a introdução dos scanners 3D e dos tomógrafos CBCT (cone beam computer tomography) tornou-se possível a obtenção de modelos dentários tridimensionais virtuais das arcadas dentárias. Foram selecionados 56 modelos dentários superiores e escaneados em três tipos diferentes de scanners: Maestro 3D Dental Scanner (AGE Solutions, Potedera, Italia), 3Shape R700 3D Scanner (3Shape, Copenhagen, Dinamarca) e o scanner 3Shape TRIOS (3Shape, Copenhagen, Dinamarca). Doze medidas foram realizadas nos modelos dentários de gesso e comparadas com as mesmas medidas realizadas nos modelos dentários digitais por meio do teste de Análise de Variância (ANOVA). Estatisticamente não foram encontradas diferenças significativas entre as medições tradicionais nos modelos dentários de gesso e as medidas realizadas nos modelos dentários digitais. Os três tipos de métodos de aquisição de modelos dentários digitais foram considerados confiáveis para as medições horizontais, transversais e verticais. Os modelos dentários virtuais podem ser indicados como substitutos dos modelos dentários de gesso.

Efeitos do estradiol sobre a função endotelial, sensibilidade insulínica e viscosidade sanguínea em mulheres na pós-menopausa com excesso de peso

A ação que o estrogênio desempenha sobre o endotélio depende da integridade deste e consequentemente das características clínicas de cada indivíduo. O uso da terapia hormonal da menopausa (THM) em mulheres com baixo risco cardiovascular geralmente resulta em efeitos benéficos, desde que iniciado em um período próximo da menopausa. Em contrapartida, o seu uso em mulheres com alto risco cardiovascular, como diabéticas ou portadoras de lesões ateroscleróticas já estabelecidas, e ainda naquelas com início da THM em um período superior a dez anos da menopausa geralmente resulta em efeitos maléficos. Nosso objetivo é avaliar os efeitos do estrogênio sobre a função endotelial em mulheres com sobrepeso ou obesidade, ou seja, indivíduos com risco cardiovascular intermediário. Para isso, 44 mulheres na pós-menopausa com idade entre 47 a 55 anos e índice de massa corporal (IMC) de 27,5 a 34,9kg/m, foram randomizadas nos grupos placebo (P) e estrogênio transdérmico (ET). A intervenção consistiu no uso transdérmico de estradiol, 1mg por dia, por um período de três meses. As participantes realizaram avaliação da reatividade endotelial em repouso e após isquemia [pletismografia por oclusão venosa (POV), com medidas do fluxo sanguíneo do antebraço (FSA) e videocapilaroscopia dinâmica do leito periungueal (VCLP), com medidas da velocidade de deslocamento das hemácias (VDH)], dosagens de moléculas de adesão [E-selectina, molécula de adesão intercelular (ICAM-1) e molécula de adesão vascular (VCAM-1)], aferição da sensibilidade insulínica [através do homeostatic model assessment of insulin resistance (HOMA-IR) e área sob a curva (AUC) da insulina durante o teste oral de tolerância à glicose (TOTG)] e mensurações das viscosidades sanguínea e plasmática. As participantes apresentaram idade de 51,77 2,3 anos, IMC de 31,52 2,54 kg/m e tempo de menopausa de 3 [2-5] anos. O grupo P não apresentou nenhuma mudança significativa em qualquer variável. Após a intervenção, o grupo ET comparado ao basal apresentou menor tempo para atingir a VDH máxima durante a hiperemia reativa pós-oclusiva (HRPO) após 1 min de isquemia (4,0 [3,25-5,0] vs. 5,0 [4,0-6,0] s, P<0.05) e maior VDH tanto em repouso (0,316 [0,309-0,326] vs. 0,303 [0,285-0,310] mm/s; P<0,001) quanto na HRPO (0,374 [0,353-0,376] vs. 0,341 [0,334-0,373] mm/s; P<0,001), assim como observamos maior FSA em repouso (2,46 [1,81-3,28] vs. 1,89 [1,46-2,44] ml/min.100ml tecido-1; P<0,01) e durante a HRPO após 3 min de isquemia (6,39 [5,37-9,39] vs. 5,23 [4,62-7,47] ml/min.100ml tecido-1; P<0,001). O grupo ET também apresentou diminuição nos níveis solúveis de E-Selectina (68,95 [50,18-102,8] vs. 58,4 [44,53-94,03] ng/ml; P<0,05), de ICAM-1 (188 [145-212] vs. 175 [130-200] ng/ml; P<0,01), do HOMAIR (3,35 1,67 vs. 2,85 1,60; P<0,05) e da AUC da insulina durante o TOTG (152 [117-186] vs. 115 [85-178]; P<0,01), além de diminuição das viscosidades sanguínea com hematócrito nativo (3,72 0,21 vs. 3,57 0,12 mPa.s; P<0,01) e plasmática (1,49 0,10 vs. 1,45 0,08 mPa.s; P<0,05), comparado ao seu basal. Em conclusão o uso de estradiol transdérmico em mulheres com excesso de peso e menopausa recente, promove melhora da função endotelial, além de oferecer proteção a outros fatores de risco cardiovascular.

Cálculo do inventário de emissões de gases efeito estufa, estudo de caso em uma indústria química

O Painel Intergovernamental de Mudanças Climáticas da ONU (IPCC) tem comprovado com nível de confiança cada vez maior, ao longo dos últimos anos, a forte relação entre o aumento da temperatura média global e o aumento dos gases de efeito estufa (GEEs) principalmente quanto ao gás que mais contribui para a composição desses gases: o gás carbônico ou CO2. O Brasil se insere no rol dos emissores desse gás, principalmente devido ao desmatamento das reservas florestais que possui. Assim, assumiu o compromisso na Convenção Quadro das Nações Unidas sobre Mudanças Climáticas (United Nations Framework Convention on Climate Change UNFCCC) de estabilizar suas emissões e inventariar periodicamente os seus GEEs. Dentro deste contexto, cabe também à indústria levantar sua parcela de responsabilidade significativa neste processo ameaçador para a vida no planeta terra. Desta forma, o principal objetivo do presente trabalho foi o de levantar e contabilizar o Inventário dos GEEs emitidos em 2006 por uma empresa que produz importantes insumos para a indústria de petróleo. A pesquisa bibliográfica sobre a metodologia mais adequada e sua aplicação para a empresa em estudo foram os principais objetivos específicos. A autora não encontrou fatores de emissão de CO2 (kg CO2/TJ do combustível, detalhado no decorrer deste trabalho) desenvolvidos no Brasil para levantar o inventário, com um nível razoável de confiança, que reflita a situação real e local. Toda a pesquisa bibliográfica feita mostrou que os trabalhos realizados mesmo por órgãos governamentais brasileiros usaram a metodologia do IPCC (versão anterior à usada neste trabalho) que foi elaborada por países desenvolvidos, que não é o nosso caso ou realidade. Foram feitas diversas visitas à empresa, levantadas todas as fontes potenciais de emissão, consumos e características de todos os combustíveis usados, bem como o levantamento do trabalho desenvolvido sobre geração de mudas de plantas no seu horto. Através de cálculos por essa metodologia reconhecida mundialmente (IPCC) a autora encontrou um valor em torno de 76.000 toneladas de CO2 emitidos pela empresa em 2006. A empresa neutralizou cerca de 80 toneladas de CO2, através da produção de mudas (para doação e plantio em torno de uma área que é um passivo ambiental) em seu horto e o que plantou na área desse passivo em 2006. Isso significou cerca de 0,1% do que emitiu

A Positive trajectory for corals at Little Cayman Island

Coral reefs are damaged by natural disturbances and local and global anthropogenic stresses. As stresses intensify, so do debates about whether reefs will recover after significant damage. True headway in this debate requires documented temporal trajectories for coral assemblages subjected to various combinations of stresses; therefore, we report relevant changes in coral assemblages at Little Cayman Island. Between 1999 and 2012, spatiotemporal patterns in cover, densities of juveniles and size structure of assemblages were documented inside and outside marine protected areas using transects, quadrats and measurements of maximum diameters. Over five years, bleaching and disease caused live cover to decrease from 26% to 14%, with full recovery seven years later. Juvenile densities varied, reaching a maximum in 2010. Both patterns were consistent within and outside protected areas. In addition, dominant coral species persisted within and outside protected areas although their size frequency distributions varied temporally and spatially. The health of the coral assemblage and the similarity of responses across levels of protection suggested that negligible anthropogenic disturbance at the local scale was a key factor underlying the observed resilience.

HEAVY VEHICLE VIBRATION - A CASE STUDY.

A method is presented for the digital simulation of multiple degrees-of-freedom lumped parameter vibrating systems with arbitrary constitutive elements in an inertial frame of reference. The geometry of the system is treated independently of the constitutive elements and as a result nonlinear (time domain) or linearised (frequency domain) calculations may be performed using a single input description. The method is used to simulate a 3-axle rigid heavy commercial vehicle for harsh vibrating conditions. Some of the assumptions to which the calculations are sensitive are examined. Agreement between the response of a 3-dimensional whole vehicle model and measurements on the test vehicle is satisfactory.

Control charts: an application in shrimp canning

Control chart is a statistical tool which can be employed with advantage to learn the situation in the process (whether it is under control or not). There are different kinds of control charts but one which is most commonly used is the control chart for variables, known as X-R chart. This chart can be used for measurable characteristics in food industry like appearance, colour, sizes and dimensions for chemical properties such as moisture, fat and many other analytical counts and measurements. Since construction and maintenance of such charts involve a recognizable amount of time and effort, they should not be used indiscriminately but only where it can be definitely shown that their use improves the overall operation. Since one control chart can be used for only one quality attribute, those for which the charts are used should be selected with care (Kramer and Twigg, 1962). In this article, the procedure of setting up a variable control chart is described with observations taken on filling operation of cans in a shrimp canning factory.

A review of the cyprinoid fish genus Barbodes Bleeker, 1859, from Yunnan, China, with descriptions of two new species

Fishes of the genus Barbodes in Yunnan have been reviewed and 2 new species are described on the basis of specimens deposited in Kunming institute of Zoology, Chinese Academy of Sciences. Counts and measurements follow Chu and Chen (1989). Barbodes heterostomus is distinguished by its terminal mouth, with gape being horizontal in the male, and acclivitous in the female, last unbranched dorsal ray smooth with upper 1/3 articulated; dorsal fin origin anterior to pelvic fin origin; no dark lateral band on sides of body; gill rakers 13-19; lateral line scales 24-29; longest caudal ray length about 2 times that of shortest. It is distributed in Longchuanjiang and Dayingjiang (upper Irrawaddy). Barbodes baoshanensis is distinguished by its smooth last unbranched dorsal ray with upper 1/3-1/2 articulated; dorsal fin origin anterior to pelvic fin origin; sides of body with a dark longitudinal band; gill rakers 13-14; lateral line scales 23-28. It occurs in Nujiang (upper Salween) and Longchuanjiang. A key to the species of Barbodes in Yunnan is provided.

Linear semiconductor optical amplifiers

The chapter reviews properties and applications of linear semiconductor optical amplifiers (SOA). Section 12.1 covers SOA basics, including working principles, material systems, structures and their growth. Booster or inline amplifiers as well as low-noise preamplifiers are classified. Section 12.2 discusses the influence of parameters like gain, noise figure, gain saturation, gain and phase dynamics, and alpha-factor. In Sect. 12.3, the application of a linear SOA as a reach extender in future access networks is addressed. The input power dynamic range is introduced, and measurements for on-off keying and phase shift keying signals are shown. Section 12.4 presents the state of the art for commercially available SOA and includes a treatment of reflective SOAs (RSOA) as well. © 2012 Springer-Verlag Berlin Heidelberg.