Matching poultry production with available feed resources: issues and constraints

Corn and soyabeans may not be available in many countries particularly those which do not have sufficient foreign currency or the capacity to grow them. This paper outlines strategies that may be important under these circumstances. Alternative feedstuffs and various feeding systems may be used to support poultry production. Alternative ingredients such as rice bran, pearl millet, cottonseed meal and grain legumes are discussed. Evidence is presented showing that amino acid requirements of layers and broilers may be too generous particularly in countries where climate, management and disease can impose production constraints. The ability of finishing broilers to perform well on very low-energy diets allows the inclusion of alternative feeds and by-products into formulations. Very low protein diets based on cereals and free amino acids can be used for layers without loss of performance. Self-selection of feedstuffs may be an important strategy in reducing feed costs of broilers and layers. The concept of matching production with available feed resources may compromise broiler growth and egg production, but in many countries this may be the most economical choice. Countries in the humid tropics usually have reduced poultry performance. The effects of high temperature and humidity are difficult to overcome. The vexed questions of the escalation in the price of fossil fuel and the outbreak of avian influenza, both seemingly without a solution, are clouds hanging over an otherwise buoyant industry.

Production of Enzymatically active ketosteroid isomerase following insoluble expression in Escherichia coli

Enzymatically active Delta(5)-3-ketosteroid isomerase (KSI) protein with a C-terminus his(6)-tag was produced following insoluble expression using Escherichia coli. A simple, integrated process was used to extract and purify the target protein. Chemical extraction was shown to be as effective as homogenization at releasing the inclusion body proteins from the bacteria] cells, with complete release taking less than 20 min. An expanded bed adsorption (EBA) column utilizing immobilized metal affinity chromatography (IMAC) was then used to purify the denatured KSI-(His(6)) protein directly from the chemical extract. This integrated process greatly simplifies the recovery and purification of inclusion body proteins by removing the need for mechanical cell disruption, repeated inclusion body centrifugation, and difficult clarification operations. The integrated chemical extraction and EBA process achieved a very high purity (99%) and recovery (89%) of the KSI-(His(6)), with efficient utilization of the adsorbent matrix (9.74 mg KSI-(His(6))/mL adsorbent). Following purification the protein was refolded by dilution to obtain the biologically active protein. Seventy-nine percent of the expressed KSI-(His(6)) protein was recovered as enzymatically active protein with the described extraction, purification, and refolding process. In addition to demonstrating the operation of this intensified inclusion body process, a plate-based concentration assay detecting KSI-(His(6)) is validated. The intensified process in this work requires minimal optimization for recovering novel his-tagged proteins, and further improves the economic advantage of E. coli as a host organism. (c) 2006 Wiley Periodicals, Inc.

Extent and economic effect of heat loads on dairy cattle production in Australia

Objective To investigate the extent of heat load problems, caused by the combination of excessive temperature and humidity, in Holstein-Friesian cows in Australia. Also, to outline how milk production losses and consequent costs from this can be estimated and minimised. Procedures Long-term meteorological data for Australia were analysed to determine the distribution of hot conditions over space and time. Fifteen dairy production regions were identified for higher-resolution data analysis. Both the raw meteorological data and their integration into a temperature-humidity thermal index were compiled onto a computer program. This mapping software displays the distribution of climatic patterns, both Australia-wide and within the selected dairying regions. Graphical displays of the variation in historical records for 200 locations in the 15 dairying regions are also available. As a separate study, production data from research stations, on-farm trials and milk factory records were statistically analysed and correlated with the climatic indices, to estimate production losses due to hot conditions. Results Both milk yields and milk constituents declined with increases in the temperature-humidity index. The onset and rate of this decline are dependent on a number of factors, including location, level of production, adaptation, and management regime. These results have been integrated into a farm-level economic analysis for managers of dairy properties. Conclusion By considering the historical patterns of hot conditions over time and space, along with expected production losses, managers of dairy farms can now conduct an economic evaluation of investment strategies to alleviate heat loads. These strategies include the provision of sprinklers, shade structures, or combinations of these.

Playing catch-up with China:challenges and strategies for smaller developing countries

This paper considers how smaller developing countries can compete with China by examining the cases of two such countries; Mauritius and Morocco. In order to supplement their more traditional extractive and agro-based industries they have developed important textile and apparel sectors, supplying principally the EU. However, the textile industries in both countries have recently come under intense competitive pressure from China with its much lower production costs and huge capacity. This paper compares and contrasts the conditions under which Mauritius and Morocco have developed their textile industries as well as exploring the challenges they now face from China and the ways in which they have reacted to them. It also examines the wider industrial policy of both countries and the extent to which they have acquired the capability to meet the threats that now face them. Some specific strategies and actions are also described and evaluated with a view to providing advice and guidance for other smaller developing countries that face similar challenges in these and other industries.

Translation strategies and cross-cultural contraints : a case study of the translation of advertising texts

Since the transfer of a message between two cultures very frequently takes place through the medium of a written text qua communicative event, it would seem useful to attempt to ascertain whether there is any kind of pattern in the use of strategies for the effective interlingual transfer of this message. Awareness of potentially successful strategies, within the constraints of context, text type, intended TL function and TL reader profile will enhance quality and cost-effectiveness (time, effort, financial costs) in the production of the target text. Through contrastive analysis of pairs of advertising texts, SL and TL, French and English, this study will attempt to identify the nature of some recurring choices made by different translators in the attempt to recreate ST information in the TL in such a manner as to reproduce as closely as possible the informative, persuasive and affective functions of the text as advertising material. Whilst recurrence may be seen to be significant in terms of illustrating tendencies with regard to the solution of problems of translation, this would not necessarily be taken as confirmation of the existence of pre-determined or prescriptive rules. These tendencies could, however, be taken as a guide to potential solutions to certain kinds of context-bound and text-type specific problem. Analysis of translated text-pairs taken from the field of advertising should produce examples of constraints posed by the need to select the content, tone and form of the Target Text, in order to ensure maximum efficacy of persuasive effect and to ensure the desired outcome, as determined by the Source Text function. When evaluating the success of a translated advertising text, constraints could be defined in terms of the culture-specific references or assumptions on which a Source Text may build in order to achieve its intended communicative function within the target community.

Evaluating design implementation strategies using enterprise simulation

Concurrent engineering and design for manufacture and assembly strategies have become pervasive in use in a wide array of industrial settings. These strategies have generally focused on product and process design issues based on capability concerns. The strategies have been historically justified using cost savings calculations focusing on easily quantifiable costs such as raw material savings or manufacturing or assembly operations no longer required. It is argued herein that neither the focus of the strategies nor the means of justification are adequate. Product and process design strategies should include both capability and capacity concerns and justification procedures should include the financial effects that the product and process changes would have on the entire company. The authors of this paper take this more holistic view of the problem and examine an innovative new design strategy using a comprehensive enterprise simulation tool. The results indicate that both the design strategy and the simulator show promise for further industrial use. © 2001 Elsevier Science B.V. All rights reserved.

Mapping the yeast host cell response to recombinant membrane protein production:relieving the biological bottlenecks

Understanding the structures and functions of membrane proteins is an active area of research within bioscience. Membrane proteins are key players in essential cellular processes such as the uptake of nutrients, the export of waste products, and the way in which cells communicate with their environment. It is therefore not surprising that membrane proteins are targeted by over half of all prescription drugs. Since most membrane proteins are not abundant in their native membranes, it is necessary to produce them in recombinant host cells to enable further structural and functional studies. Unfortunately, achieving the required yields of functional recombinant membrane proteins is still a bottleneck in contemporary bioscience. This has highlighted the need for defined and rational optimization strategies based upon experimental observation rather than relying on trial and error. We have published a transcriptome and subsequent genetic analysis that has identified genes implicated in high-yielding yeast cells. These results have highlighted a role for alterations to a cell's protein synthetic capacity in the production of high yields of recombinant membrane protein: paradoxically, reduced protein synthesis favors higher yields. These results highlight a potential bottleneck at the protein folding or translocation stage of protein production.

Supply chain strategies for competitive manufacture

Few people would argue that there is one single solution to the design of a manufacturing supply chain. Relatively recent concepts such as strategic outsourcing and partnership sourcing are extremely valuable to some manufacturing organisations. This paper presents the findings of a comprehensive survey of manufacturing sourcing practices in the UK. This study has set out to understand current and intended practices that manufacturing companies have with their key suppliers, and also the decision processes and circumstances that have caused these relationships to occur.

A consideration of modelling techniques that can be used to evaluate manufacturing strategies

Practising engineers frequently seek to understand what the effects of various manufacturing strategies will be on the performance of their production facilities. In this situation a computer model can help to provide insight and form predictions about future manufacturing system performance. Various types of modelling methods exist and each provide models that have distinct characteristics. This paper presents a review of popular modelling techniques and, based on the results of a structured experimental study, summarises their capabilities to support the evaluation of manufacturing strategies.

Which factors drive firm survival within an industry boundary over time?:the UK onshore oil and gas production industry 1984-1999

This thesis looks at the UK onshore oil and gas production industry and follows the history of a population of firms over a fifteen-year period following the industry's renaissance. It examines the linkage between firm survival, selection pressures and adaptation responses at the firm level, especially the role of discretionary adaptation, specifically exploration and exploitation strategies.Taking a Realist approach and using quantitative and qualitative methods for triangulation on a new data base derived from archival data, as well as informant interviews, it tests seven hypotheses' about post-entry survival of firms. The quantitative findings suggest that firm survival within this industry is linked to discretionary adaptation, when measured at the firm level, and to a mixture of selection and adaptation forces when measured for each firm for each individual year. The qualitative research suggests that selection factors dominate. This difference in views is unresolved. However the small, sparse population and the nature of the oil and gas industry compared with other common research contexts such as manufacturing or service firms suggests the results be treated with caution as befits a preliminary investigation. The major findings include limited support for the theory that the external environment is the major determinant of firm survival, though environment components affect firms differentially; resolution of apparent literature differences relating to the sequencing of exploration and exploitation and potential tangible evidence of coevolution. The research also finds that, though selection may be considered important by industry players, discretionary adaptation appears to play the key role, and that the key survival drivers for thispopulation are intra-industry ties, exploitation experience and a learning/experience component. Selection has a place, however, in determining the life-cycle of the firm returning to be a key survival driver at certain ages of the firm inside the industry boundary.

Strategies for sustaining manufacturing competitiveness:case studies of Australian firms

This study investigates the strategies adopted by Australian manufacturing firms to sustain their local production and competitiveness, including during the period of the recent global financial crisis. Six Australian manufacturing organisations in different sectors were selected and analysed using the market-based and resource-based views, and components of the DRAMA framework. The findings highlight several factors and company efforts to sustain manufacturing operations. These organisations pursued a range of manufacturing strategies to enable distinctive offerings in the marketplace and used various ways to differentiate themselves. This was possible through the portfolio of capabilities that determine their continued production and business performance over the period. This study provides important lessons for managers in manufacturing organisations and demonstrates how differing capabilities and strategies of firms can impact the competitiveness of local production, not only in times of economic crisis but also in the long run to sustainable competitiveness in the future.

The relationship between internationalisation and innovation:internationalisation strategies, foreign firms', patenting behaviour and FDI spillovers

This thesis aims to contribute to the understanding of the relationships between internationalisation and innovation. Based on large comprehensive firm level data from China, this thesis comprises of three empirical chapters examining internationalisation from different aspects. Specifically, the first empirical work studies how firms internationalise. It links the choice of firms’ internationalisation strategies with firm characteristics. Additionally, it re-examines the stepwise internationalisation theory by distinguishing different foreign direct investment (FDI) motives. It proposes two pecking orders of firm performance in internationalisation strategies. The second empirical study investigates what kind of innovation activities internationalised firms do. It analyses the factors that drive foreign firms to patent in an emerging host country context. It stresses the importance of the intellectual property rights protection aspect of business environment at regional level in promoting patents, the role of industry dependence on external finance in shaping foreign firms’ patenting behaviour, as well as links foreign firms’ patent production with FDI motivation. The third empirical research examines the effect of internationalisation by examining the links between inward FDI and domestic innovation in a host country. It specifically examines technology spillovers from inward FDI through the direct lens of innovation (captured by grant patents), instead of adopting the indirect productivity approach widely employed by the literature. Distinguishing different types of innovation, it provides direct evidence of heterogeneous innovation spillovers from FDI.