Análise espacial da distribuição longitudinal de sementes de milho em uma semeadora-adubadora de precisão

In the operation of sowing with planter numerous factors interfere with the establishment of the plant stand, among them, the longitudinal distribution of seeds depending on the displacement speed can significantly affect crop productivity.The present study aimed the evaluation of longitudinal distribution of maize seeds in two different speeds of dislocation of a precision grain drill, through classical and geostatistics. A regular grid sample, totalizing 100 points in each area, was built with 10-meter distance among the points. Each sample point comprised 3.6m(2) (1.8 x 2.0) where the percentage of acceptable, double and fail spacing among the plants was measured after sowing at 4.58 and 5.94 km h(-1) speed of dislocation. Classical and geostatistics were used for data analyses. The percentage of acceptable and failed spacing has shown significant difference between 4.58 and 5.94 km h(-1) speed. The results has shown absence of spatial dependence regarding the percentage of the studied spacing (acceptable, fail and double) at both speeds, showing that studies and statistical inferences can occur based on parameters of classical statistics for distances higher than the shortest one used in the sampling.

Predicao de campo em comunicacao sem fio

Even living in the XXI century are still some difficulties in access to broadband Internet in several Brazilian cities, due to the purchasing power of people and lack of government investment. But even with these difficulties, we seek to encourage the use of wireless technology, which is based on the IEEE 802.11b protocol - also known as Wi-Fi (Wireless Fidelity) Wireless Fidelity Communications, having wide range of commercial applications in the world market, nationally and internationally. In Brazil, this technology is in full operation in major cities and has proved attractive in relation to the access point to multipoint and point-to-point. This paper is a comparative analysis of prediction field, using models based on the prediction of propagation loss. To validate the techniques used here, the Okumura-Hata models, modified Okumura-Hata, Walfisch-Ikegami model, were applied to a wireless computer network, located in the neighborhood of Cajupiranga in the city of Melbourn, in Rio Grande do Norte . They are used for networking wireless 802.11b, using the Mobile Radio to measure signal levels, beyond the heights of the antennas and distances from the transmitter. The performance data versus distance are added to the graphs generated and compared with results obtained through calculations of propagation models

Estudo dos parâmetros de extração de fenol de efluentes aquosos por um tensoativo não iônico

Environmental sustainability has become one of the topics of greatest interest in industry, mainly due to effluent generation. Phenols are found in many industries effluents, these industries might be refineries, coal processing, pharmaceutical, plastics, paints and paper and pulp industries. Because phenolic compounds are toxic to humans and aquatic organisms, Federal Resolution CONAMA No. 430 of 13.05.2011 limits the maximum content of phenols, in 0.5 mg.L-1, for release in freshwater bodies. In the effluents treatment, the liquid-liquid extraction process is the most economical for the phenol recovery, because consumes little energy, but in most cases implements an organic solvent, and the use of it can cause some environmental problems due to the high toxicity of this compound. Because of this, exists a need for new methodologies, which aims to replace these solvents for biodegradable ones. Some literature studies demonstrate the feasibility of phenolic compounds removing from aqueous effluents, by biodegradable solvents. In this extraction kind called "Cloud Point Extraction" is used a nonionic surfactant as extracting agent of phenolic compounds. In order to optimize the phenol extraction process, this paper studies the mathematical modeling and optimization of extraction parameters and investigates the effect of the independent variables in the process. A 32 full factorial design has been done with operating temperature and surfactant concentration as independent variables and, parameters extraction: Volumetric fraction of coacervate phase, surfactant and residual concentration of phenol in dilute phase after separation phase and phenol extraction efficiency, as dependent variables. To achieve the objectives presented before, the work was carried out in five steps: (i) selection of some literature data, (ii) use of Box-Behnken model to find out mathematical models that describes the process of phenol extraction, (iii) Data analysis were performed using STATISTICA 7.0 and the analysis of variance was used to assess the model significance and prediction (iv) models optimization using the response surface method (v) Mathematical models validation using additional measures, from samples different from the ones used to construct the model. The results showed that the mathematical models found are able to calculate the effect of the surfactant concentration and the operating temperature in each extraction parameter studied, respecting the boundaries used. The models optimization allowed the achievement of consistent and applicable results in a simple and quick way leading to high efficiency in process operation.

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

O conceito de consciência em o ser e o nada de J.-P. Sartre

This current discourse intends to prove how consciousness or Being-for-itself presents the idea that in its operation one can emphasize that it s Nothingness, transience and liberty in Jean-Paul Sartre s work O Ser e o Nada. To testify the proposed idea, the conception that Sartre gives to consciousness, representing nothingness, without any content that is connected to the possessor objects of a transphenomenal existence will be the starting point. This way, consciousness will be analyzed transcendently to the object that it s not, demonstrating its revealer-revealed condition, because it unveils a concrete world that exists against its idea, functioning as the revealer intentionality that there are beings instead of nothingness, obeying the ontological proof defended by Sartre. From this idea, every kind of consciousness will always be consciousness of something, a glance of the world, avoiding the fact that the consciousness could be considered nothing in the world. In order to live its original negation state of the world, apprehending this same world, with the purpose of a knowledge, it needs to be divided in two: the first degree consciousness or previous-reflexive cogito, that turns the proper reflexion possible, because, it s the consciousness proper transphenomenality of being different of all that connected to its existence being only its consequence; and the cogito, responsible to the positioning of the first degree consciousness, while aware of its own consciousness, that is, while being certain that knows. From this point, the way to untangle the consciousness or Being-for-itself will be developed as being Chasm, Liberty and transience. From this idea, it s intended to know how consciousness, that in Sartre s thoughts is originally nothing, could turn into Liberty that is presented in the field of transience? In other words, how these three internal structures imbricate one another to form consciousness in Sartre? First of all, it has to be considered the review of a conduct of human reality, the inquiry, that will be possible to understand how Nothingness exists as the mold of all kind of negation. After this, it will be shown, considering its way of existence, the human reality that is connected to Para-si, determined like nothingness, still is proposed like Liberty. Form this point, it will be possible to gleam how Liberty is lived deeply by Para-si in the shape of chasm, trying to how Para-si turns into nothingness, creating a chasm based on its proper liberty. Then, Liberty will be the proper mechanism used by Para-si to modificate its original chasm. The way Being-for-itself has to build to gain its goal will be projecting in transience, the building of something possible that brings one being back. However, will be demonstrated like Chasm can occupy the moment of a choice turning the decision instant an anguish stage, based on the failing of stability of the Being-for-itself, once nothingness persists in the field of the possibilities that human beings preserves in its essence while being essentially Liberty. From this idea, anguish will be studied as the proper consciousness of Liberty, being bad-faith the attempt of avoid Liberty trying to gain a shelter contradicting the fact that life is done of continual choices

Analysis of the Influence of Sparkout Time on Grinding Using Several Lubrication/Cooling Methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do tipo de chanfro, tecimento e sentido de laminação na distorção angular em soldagem GMAW-P robotizada de alumínio

The industry's interest in having a greater control of the deformations caused by welding is due to the geometric and dimensional tolerances been more and more precise in the project specifications, motivating the manufacturing engineering to develop stable processes and to ensure routine production. Aiming at it, the main goal of this present work is to analyze how much routine situations used in automatic aluminum welding can influence on the angular deformations of this material. Using the alloy AA 5052 H34, and the automatic welding in pulsed GMAW process, three types of weaving were applied throughout the length of the weld, in butt joints assembled without groove and with 60 degrees single-V-groove, arranged transversely as well as longitudinally to the rolling direction of the plate. The measurement of the deformations was made by a three-dimensional equipment, before and after the welding, in three distinct regions in the specimens. The profile of the weld bead was the main factor for the different types of deformations found, as revealed by macrographical analysis. The 60 degrees single-V-groove had higher amplitudes of deformations as the joint without groove. The torch oscillation wasn't a variable of statistically significant influence on this amplitudes.

Structural integrity identification based on smart materials and neural networks

This paper presents a non-model based technique to detect, locate, and characterize structural damage by combining the impedance-based structural health monitoring technique with an artificial neural network. The impedance-based structural health monitoring technique, which utilizes the electromechanical coupling property of piezoelectric materials, has shown engineering feasibility in a variety of practical field applications. Relying on high frequency structural excitations (typically>30 kHz), this technique is very sensitive to minor structural changes in the near field of the piezoelectric sensors. In order to quantitatively assess the state of structures, two sets of artificial neural networks, which utilize measured electrical impedance signals for input patterns, were developed. By employing high frequency ranges and by incorporating neural network features, this technique is able to detect the damage in its early stage and to estimate the nature of damage without prior knowledge of the model of structures. The paper concludes with an experimental example, an investigation on a massive quarter scale model of a steel bridge section, in order to verify the performance of this proposed methodology.

Maxillo-mandibular counter-clockwise rotation and mandibular advancement with TMJ Concepts (R) total joint prostheses Part III - Pain and dysfunction outcomes

47 end-stage TMJ patients with high occlusal plane angulation, treated with TMJ custom-fitted total joint prostheses and simultaneous maxillo-mandibular counter-clockwise rotation were evaluated for pain and dysfunction presurgery (T1) and at the longest follow-up (T2). Patients subjectively rated their facial pain/headache, TMJ pain, jaw function, diet and disability. Objective functional changes were determined by measuring maximum interincisal opening (MIO) and laterotrusive movements. Patients were divided according to the number of previous failed TMJ surgeries: Group 1 (0-1), Group 2 (2 or more). Significant subjective pain and dysfunction improvements (37-52%) were observed (<0.001). MIO increased 14% but lateral excursion decreased 60%. The groups presented similar absolute changes, but Group 2 showed more dysfunction at T1 and T2. For patients who did not receive fat grafts around the prostheses and had previous failure of proplast/teflon and or silastic TMJ implants, more than half required surgery for TMJ debridement and removal of foreign body giant cell reaction and heterotopic bone formation. End-stage TMJ patients can be treated in one operation with TMJ custom-made total joint prostheses and maxillo-mandibular counter-clockwise rotation, for correction of dentofacial deformity and improvement in pain and TMJ dysfunction; Group 1 patients had better results than Group 2 patients.

Uniformidade de distribuição do potássio e do nitrogênio em sistema de irrigação por gotejamento

O uso da fertirrigação possibilita a obtenção de bons resultados, todavia é notada a necessidade de trabalhos que venham possibilitar a adoção correta da técnica. Dessa forma ,o presente trabalho buscou comparar a uniformidade de distribuição do potássio e do nitrogênio em sistema de irrigação por gotejamento. A solução de fertilizantes foi injetada durante 25 minutos, sendo recolhidas amostras de solução em diferentes momentos, durante e após ter sido finalizada a operação de injeção, tendo sido especificado o tempo de 35 minutos após o início da operação de injeção da solução de fertilizantes, como tempo-limite para a coleta da última amostra. As amostras coletadas tiveram os teores de potássio (K+) e nitrogênio (NO3- + NH4+) determinados. Com os resultados obtidos, concluiu-se que não houve variação significativa da uniformidade de distribuição de nitrogênio e de potássio no sistema de irrigação por gotejamento; maiores tempos de funcionamento de sistemas de irrigação, quando em operação de fertirrigação, possibilitam melhores uniformidades de distribuição do fertilizante, e deve-se calcular o tempo de lavagem do sistema de irrigação, pois é uma forma de melhorar a uniformidade de distribuição do fertilizante no campo.

Potencial de produção de biogás remanescente nos efluentes de biodigestores abastecidos com dejetos de suínos, com e sem separação da fração sólida, e conduzidos sob diferentes tempos de retenção hidráulica

O objetivo foi avaliar o potencial poluidor remanescente dos efluentes de biodigestores abastecidos com dejetos de suínos com separação da fração sólida (CSFS) e sem separação da fração sólida (SSFS), e conduzidos sob diferentes tempos de retenção hidráulica (TRH). Os efluentes utilizados eram de biodigestores semicontínuos manejados com TRH de 15; 22; 29 e 36 dias, com e sem separação da fração sólida. Foram utilizados biodigestores batelada, que permaneceram em operação por todo o tempo em que houve produção de biogás (60 dias). Foram avaliadas a produção e a qualidade do biogás, bem como os potenciais de produção por kg de sólidos totais e sólidos voláteis, e as demandas química e bioquímica de oxigênio. Utilizou-se do delineamento inteiramente casualisado, em esquema fatorial 2x4, com três repetições por tratamento. Foram encontrados potenciais de produção de 385 e 117 litros de CH4kg-1 de SV adicionados no material SSFS e CSFS, respectivamente, no menor TRH (15 dias), e potenciais de produção de 74 e 18 litros de CH4kg-1 de SV adicionados no material SSFS e CSFS, respectivamente, no maior TRH (36 dias).

Jejum Pré-abate em Frangos de Corte

As condições ideais dos frangos de corte no momento do abate devem ser conhecidas a fim de possibilitar a produção de carne de excelente qualidade, uma vez que diversos fatores pré e pós-abate estão envolvidos na qualidade final. em condições normais de abate e processamento, a retirada de ração é feita de 6 a 8 horas antes da apanha das aves, resultando em um período total de jejum de 8 a 12 horas antes do abate, para esvaziar o intestino e com isso minimizar a contaminação no abatedouro. A escalda, depena e evisceração são pontos importantes de contaminação cruzada no abatedouro devido à grande quantidade de microorganismos aderidos às penas, pele e patas das aves e ao rompimento das vísceras durante a evisceração. Entretanto, a desidratação da carcaça começa imediatamente após o início do jejum. Períodos prolongados de jejum podem afetar o pH das diversas partes do intestino, aumentando a presença de Salmonella e outros microorganismos patogênicos. Além disso, determinam uma maior contaminação pela bile, e são, subjetivamente, associados à fragilidade dos intestinos durante a evisceração mecânica. Portanto, os esquemas de processamento devem ser estabelecidos levando-se em conta a integridade e o esvaziamento do intestino e da vesícula biliar, bem como a desidratação e os seus efeitos sobre o bem estar das aves, contaminação da carcaça e qualidade da carne. Como alguns efeitos do jejum ainda não são bem conhecidos, sugerem-se pesquisas nas seguintes áreas: definir o tempo ótimo de jejum para atender o bem estar das aves, minimizar a contaminação e otimizar os parâmetros de qualidade de carcaça; estudar os efeitos de períodos prolongados de jejum sobre o pH e a colonização do papo, pró-ventrículo, moela, intestino delgado, intestino grosso e cecos por enterobactérias, como Salmonella, por exemplo; efeito do jejum sobre o tamanho e cor do fígado. O resultado esperado é um aumento na qualidade final dos produtos aliado a uma redução nas perdas e no custo de produção.

Variable structure controller and observer applied to induction machine

This work will propose the control of an induction machine in field coordinates with imposed stator current based on theory of variable structure control and sliding mode. We describe the model of an induction machine in field coordinates with imposed stator current and we show the design of variable structure control and sliding mode to get a desirable dynamic performance of that plant. To estimate the inaccessible states we will use a state observer (estimator) based on field coordinates induction machine. We will present the results of simulations in any operation condition (start, speed reversal and load) and with parameters variation of the machine compared to a PI control scheme.

Impedance-based structural health monitoring with artificial neural networks

This paper presents a non-model based technique to detect, locate, and characterize structural damage by combining the impedance-based structural health monitoring technique with an artificial neural network. The impedance-based structural health monitoring technique, which utilizes the electromechanical coupling property of piezoelectric materials, has shown engineering feasibility in a variety of practical field applications. Relying on high frequency structural excitations (typically >30 kHz), this technique is very sensitive to minor structural changes in the near field of the piezoelectric sensors. In order to quantitatively assess the state of structures, multiple sets of artificial neural networks, which utilize measured electrical impedance signals for input patterns, were developed. By employing high frequency ranges and by incorporating neural network features, this technique is able to detect the damage in its early stage and to estimate the nature of damage without prior knowledge of the model of structures. The paper concludes with experimental examples, investigations on a massive quarter scale model of a steel bridge section and a space truss structure, in order to verify the performance of this proposed methodology.

Performance of constructed wetland system for public water supply

The project is being conducted in the town of Analândia, São Paulo, Brazil. The constructed wetlands system for water supply consists of a channel with floating aquatic macrophytes, HDS system (Water Decontamination with Soil - Patent PI 850.3030), chlorinating system, filtering system and distribution. The project objectives include investigating the process variables to further optimize design and operation factors, evaluating the relation of nutrients and plants development, biomass production, shoot development, nutrient cycling and total and fecal coliforms removal, comparing the treatment efficiency among the seasons of the year; and moreover to compare the average values obtained between February and June 1998 (Salati et al., 1998) with the average obtained for the same parameters between March and June 2000. Studies have been developed in order to verify during one year the drinking quality of the water for the following parameters: turbidity, color, pH, dissolved oxygen, total of dissolved solids, COD, chloride, among others, according to the Ministry of Health's Regulation 36. This system of water supply projected to treat 15 L s-1 has been in continuous operation for 2 years, it was implemented with support of the National Environment Fund (FNMA), administered by the Center of Environmental Studies (CEA-UNESP), while the technical supervision and design were performed by the Institute of Applied Ecology. The actual research project is being supported by FAPESP.