Caracterização química da carne de cabrito da raça Moxotó e de cruzas Pardo Alpina x Moxotó

O objetivo da pesquisa foi avaliar a composição química da carne de cabrito-mamão (idade média de 72 dias), da raça Moxotó (MOX), grupos genéticos ¾ Pardo Alpina x ¼ Moxotó (3/4 PAMOX) e ½ Pardo Alpina x ½ Moxotó (1/2 PAMOX). A análise apresentou valores médios entre 77,80% a 80,25% de umidade; 15,90% a 19,08% de proteína; 1,12% a 1,21% de gordura, e 1,29% a 2,03% de cinzas. Quanto à composição mineral, os valores médios variaram de 5,62 mg/100 g a 8,21 mg/100 g de cálcio; 156,97 mg/100 g a 196,25 mg/100 g de fósforo; 0,26 mg/100 g a 0,48 mg/100 g de ferro; 16,25 mg/100 g a 23,72 mg/100 g de magnésio; 59,20 mg/100 g a 78,79 mg/100 g de sódio, e de 259,69 mg/100 g a 292,24 mg/100 g de potássio. Foram encontradas diferenças significativas a 5% de probabilidade entre os grupos genéticos no que diz respeito à composição de umidade, proteína e cinzas e mineral quanto a elementos estudados. Não houve diferenças entre os valores de gordura dos grupos genéticos.

A Study of the Reliability of the ASTM C-666 Freeze-Thaw Test, MLR-72-01 and R-252, 1972

The Iowa State Highway Commission purchased a Conrad automatic freeze and thaw machine and placed it in operation during October 1961. There were a few problems, but considering, the many electrical and mechanical devices used in the automatic system it has always functioned quite well. Rapid freezing and thawing of 4"x4"xl8" concrete beams has been conducted primarily in accordance with ASTM C-29l (now ASTM C-666 procedure B) at the rate of one beam per day. Over 4000 beams have been tested since 1961, with determination of the resulting durability factors. Various methods of curing were used and a standard 90 day moist cure was selected. This cure seemed to yield durability factors that correlated very well with ratings of coarse aggregates based on service records. Some concrete beams had been made using the same coarse aggregate and the durability factors compared relatively well with previous tests. Durability factors seemed to yield reasonable results until large variations in durability factors were noted from beams of identical concrete mix proportions in research projects R-234 and R-247. This then presents the question "How reliable is the durability as determined by ASTM C-666?" This question became increasingly more important when a specification requiring a minimum durability factor for P.C. concrete made from coarse aggregates was incorporated into the 1972 Standard Specification for coarse aggregates for concrete.

Recycling of Portland Cement Concrete Roads in Iowa, MLR-77-6, 1977

We are depleting the once seemingly endless supply of aggregate available for concrete paving in Iowa. At the present time, some parts of our state do not have locally available aggregates of acceptable quality for portland cement concrete paving. This necessitates lengthy truck and rail hauls which frequently more than doubles the price of aggregate. In some parts of the state, the only coarse aggregates available locally are "d-cracking" in nature. Iowa's recycling projects were devised to alleviate the shortage of aggregates wherever they were found to have an economic advantage. We completed our first recycling project in 1976 on a 1.4 project in Lyon county. The data collected in this project was used to schedule two additional projects in 1977. The larger of these two projects is located in Page and Taylor county on Highway #2 and is approximately 15 miles in length. This material is to be crushed and re-used in the concrete paving, it is to be reconstructed on approximately the same alignment. The second project is part of the construction of Interstate I-680 north of council Bluffs where an existing 24 foot portland cement concrete roadway is to be recycled and used as the aggregate in the slip form econocrete subbase and the portland cement concrete shoulders.

A comparative study between crosslinked sodium hyaluronate (healaflow glaucoma implant) and high molecular weight sodium hyaluronate (healon 5) as subconjunctival spacers injected into failed filtration blebs during needling with MMC

Purpose: To compare the efficacy and safety of a slowly resorbable glaucoma implant, Healaflow (HF) and Healon 5 (H5) as spacers injected into failing filtration blebs at the time of bleb needlings, augmented with MMC Methods: Eighty-four glaucoma patients with filtration bleb failure following glaucoma surgery (deep sclerectomy/ trabeculectomy) underwent bleb needling using either HF (n=44) or H5 (n=40) as an intrableb viscoelastic spacer. All needlings were augmented by MMC and performed in the operating room, by a single surgeon. The choice between HF and H5 was randomised. Postoperative data for IOP, number of glaucoma medications (GMs), antimetabolite injections (AMIs), bleb morphology and all complications were recorded at day 1 (D1), weeks 1 (W1), 4 (W4), month 6 (M6) and last visit. Success was defined as IOP≤21mmHg and 20% reduction in IOP from baseline Results: Age was comparable between groups (HF vs H5; 66 vs 72 years; p=0.13*). There were no differences in mean postoperative IOP or GMs at any time point between groups (mean IOP = HF vs H5; prior to needling=19.8mmHg vs 18.7mmHg, p=0.48*; D1=10.4mmHg vs 10.2mmHg, p=0.85*; W1=12.3mmHg vs 13.8mmHg, p=0.33*; W4=15.7mmHg vs 15.1mmHg, p=0.69*; M6=14.3mmHg vs 13.8mmHg, p=0.69*. Mean GMs= HF vs H5; prior to needling=1.7 vs 1.7, p=0.96*; M6=0.9 vs 1.1, p=0.66*). Success rates were comparable between HF and H5 groups (74% vs 71%). Requirements for AMIs were similar between groups; post filtration surgery and prior to needling (mean AMIs 1.54 vs 1.65 p=0.82*) and within the first six months following needling ( 0.77 vs 0.65 p=0.70*). Complication rates were infrequent in both groups (9%, HF; 3%, H5) * two-sample t-test Conclusions: The early to mid-term success rates of needlings using intrableb spacers were high. However there were no differences observed between the use of crosslinked and high molecular weight sodium hyaluronate

Bonded, Thin-Lift, Non-Reinforced Portland Cement Concrete Resurfacing, MLR-77-2, 1977

A research project involving 2, 3, 4, and 5 in. (5.1, 7.6, 10.2, and 12.7 cm) of bonded portland cement concrete (PCC) overlay on a 1.3 mile (2.1 km) PCC pavement was conducted in Clayton County, Iowa, during September 1977, centering on the following objectives: (1) Determine the mixing and proportioning procedures required in using a conventional, central mix proportioning plant to produce a dense PCC mixture using standard mixes with super water reducing admixtures; (2) Determine the economics, longevity and maintenance performance of a bonded, thin-lift, non-reinforced PCC resurfacing course using conventional procedures, equipment and concrete paving mixtures both with and without super water reducing admixtures; and (3) Determine if an adequate bond between the existing pavement and an overlay of thin-lift, dense, non-reinforced PCC can be obtained with only special surface cleaning and no surface removal or grinding. The conclusions are as follows: (1) Normal mixing equipment and proportioning procedures could be used using a conventional central-mix proportioning plant. This was successful when used with super water reducing admixtures. Only minor changes need be made in procedures and timing. (2) The time has been too short since the completion of the project to determine how the new pavement will perform, however, initially it appears that the method is economical and no reason is seen at this time why the life of the pavement should not be comparable to an all new pavement. (3) The initial test results show that bond strength, regardless of which method of cleaning is used, scarifying, sand blasting or water blasting, far exceed what is considered the minimum bond strength of 200 psi (1379 kPa) except where the paint stripes were intentionally left, thus showing that the paint must be removed. (4) It appears that either cement and water grout or sand, cement and water grout may be used and still obtain the required bond.

Portland Cement Concrete Utilizing Recycled Pavement, MLR-77-3, 1977

Two objectives were involved in this recycling project: To determine if the asphalt concrete surfacing from an existing roadway could be removed, the existing portland cement concrete pavement broken, removed, crushed to 1-1/2 inch minus, proportioned through a conventional central mix proportioning plant with the addition of concrete sand, and placed with a conventional slipform paver; and to determine if a two course, composite pavement, each course of different mix proportions, could be placed monolithically with conventional slipform equipment after being proportioned and mixed in a conventional central mix plant. The project was completed with no major problem. The objectives were satisfactorily met. The project was a success to the degree that the Iowa D.O.T. is proceeding with at least two projects for the 1977 construction season that will utilize the old pavement as appregate for the new pavement.

Iowa D.O.T's Experience with Recycling Portland Cement Pavement and Asphalt Cement Pavement, MLR-77-4, 1977

This report provides details of IADOT's experience removing and crushing asphaltic concrete and portland cement concrete for recycling. The recycled material was used on interstate highways for the subbase and shoulders. The major problem IADOT encountered on this project was the removal of reinforcing steel from the broken concrete. The contractor used hydraulic powered shears to clip off all protruding steel during the removal and loading of the concrete on the grade. This project took place in 1977.

Skid Resistance of the Secondary Road System in Iowa, MLR-77-1, 1977

The Iowa Department of Transportation has been conducting skid resistance tests on the paved secondary system on a routine basis since 1973. This report summarizes the data obtained through 1976 on 10,101 miles in 95 of the 99 counties in Iowa. A summary of the skid resistance on the secondary system is presented by pavement type and age. The data indicates that the overall skid resistance on this road system is excellent. Higher traffic roads (over 1000 vehicles per day) have a lower skid resistance than the average of the secondary roads for the same age and pavement type. The use of non-polishing aggregates in asphaltic concrete paving surface courses and transverse grooving of portland cement concrete paving on high traffic roads is recommended. The routine resurvey of skid resistance on the secondary road system on a 5-year interval is probably not economically justified and could be extended to a 10-year interval.

IV thrombolysis and statins.

Objective: To examine whether prior statin use affects outcome and intracranial hemorrhage (ICH) rates in stroke patients receiving IV thrombolysis (IVT).Methods: In a pooled observational study of 11 IVT databases, we compared outcomes between statin users and nonusers. Outcome measures were excellent 3-month outcome (modified Rankin scale 0-1) and ICH in 3 categories. We distinguished all ICHs (ICH(all)), symptomatic ICH based on the criteria of the ECASS-II trial (SICH(ECASS-II)), and symptomatic ICH based on the criteria of the National Institute of Neurological Disorders and Stroke (NINDS) trial (SICH(NINDS)). Unadjusted and adjusted odds ratios (OR) with 95% confidence intervals were calculated.Results: Among 4,012 IVT-treated patients, 918 (22.9%) were statin users. They were older, more often male, and more frequently had hypertension, hypercholesterolemia, diabetes, coronary heart disease, and concomitant antithrombotic use compared with nonusers. Fewer statin users (35.5%) than nonusers (39.7%) reached an excellent 3-month outcome (OR(unadjusted) 0.84 [0.72-0.98], p = 0.02). After adjustment for age, gender, blood pressure, time to thrombolysis, and stroke severity, the association was no longer significant (0.89 [0.74-1.06], p = 0.20). ICH occurred by trend more often in statin users (ICH(all) 20.1% vs 17.4%; SICH(NINDS) 9.2% vs 7.5%; SICH(ECASS-II) 6.9% vs 5.1%). This difference was statistically significant only for SICH(ECASS-II) (OR = 1.38 [1.02-1.87]). After adjustment for age, gender, blood pressure, use of antithrombotics, and stroke severity, the OR(adjusted) for each category of ICH (ICH(all) 1.15 [0.93-1.41]; SICH(ECASS-II) 1.32 [0.94-1.85]; SICH(NINDS) 1.16 [0.87-1.56]) showed no difference between statin users and nonusers.Conclusion: In stroke patients receiving IVT, prior statin use was neither an independent predictor of functional outcome nor ICH. It may be considered as an indicator of baseline characteristics that are associated with a less favorable course. Neurology (R) 2011;77:888-895

Caracterização genética da raça bovina Crioulo Lageano por marcadores moleculares RAPD

O objetivo deste trabalho foi a caracterização genética da raça bovina Crioulo Lageano por marcadores RAPD em comparação com as raças Holandesa e Nelore. Foram selecionados 43 primers, que geraram 77 bandas polimórficas. Os animais foram distribuídos em cinco subgrupos de Crioulo Lageano (I a V), e um subgrupo em cada uma das raças Holandesa (VI) e Nelore (VII). A maior parte da variância genética total (65,05%) foi causada pela diferença de indivíduos dentro dos grupos, e o restante pelas diferenças entre grupos. A análise conjunta dos grupos I a V apresentou variabilidade genética entre grupos de 25,28% e dentro dos grupos de 74,72%. A diversidade gênica vem se mantendo ao longo das gerações no núcleo de conservação do Crioulo Lageano. A raça Holandesa apresentou a menor diversidade gênica (0,1204), e a Crioulo Lageano a maior (0,3154). A maior distância genética (0,3747) foi entre as raças Nelore e Holandesa. Os grupos de Crioulo Lageano apresentaram diferenças entre si e apenas alguns indivíduos de cada grupo posicionaram-se junto a outros grupos. A técnica RAPD é capaz de estimar a distância genética entre raças ou populações e de auxiliar na escolha de indivíduos, visando aos trabalhos de conservação de recursos genéticos.

Vitamin D deficiency and a CYP27B1-1260 promoter polymorphism are associated with chronic hepatitis C and poor response to interferon-alfa based therapy.

BACKGROUND & AIMS: Vitamin D is an important immune modulator and preliminary data indicated an association between vitamin D deficiency and sustained virologic response (SVR) rates in hepatitis C virus (HCV) genotype 1 patients. We, therefore, performed a comprehensive analysis on the impact of vitamin D serum levels and of genetic polymorphisms with functional relevance within the vitamin D cascade on chronic hepatitis C and its treatment. METHODS: Vitamin D serum levels, genetic polymorphisms within the vitamin D receptor and 1α-hydroxylase were determined in a cohort of 468 HCV genotype 1, 2, and 3 infected patients who were treated with interferon-alfa based regimens. RESULTS: Chronic hepatitis C was associated with a high incidence of severe vitamin D deficiency compared to controls (25(OH)D(3)<10 ng/ml in 25% versus 12%, p<0.00001). 25(OH)D(3) deficiency correlated with SVR in HCV genotype 2 and 3 patients (50% and 81% SVR for patients with and without severe vitamin D deficiency, respectively, p<0.0001). In addition, the CYP27B1-1260 promoter polymorphism rs10877012 had substantial impact on 1,25-dihydroxyvitamin D serum levels (72, 61, and 60 pmol/ml for rs10877012 AA, AC, and CC, respectively, p=0.04) and on SVR rates in HCV genotype 1, 2, and 3 infected patients (77% and 65% versus 42% for rs10877012 AA, AC, and CC, respectively, p=0.02). CONCLUSIONS: Chronic hepatitis C virus infection is associated with vitamin D deficiency. Reduced 25-hydroxyvitamin D levels and CYP27B1-1260 promoter polymorphism leading to reduced 1,25-dihydroxyvitamin D levels are associated with failure to achieve SVR in HCV genotype 1, 2, and 3 infected patients.

Rehabilitation of orbital cavity after total orbital exenteration using oculofacial prostheses anchored by osseointegrated dental implants posed as a one-step surgical procedure

BACKGROUND: Total orbital exenteration is a radical surgical procedure, which typically involves the removal of the entire contents of the orbit including the periorbita, leaving the patient with a deep orbital deformity and results in devastating cosmetic, functional, and psychological consequences requiring difficult and challenging procedures for oculoplastic surgeons. Oculofacial prostheses retained by endosseous dental implants present an attractive and viable alternative when aesthetic and functional demands are beyond the capacity of local reconstructive efforts. PATIENTS AND METHODS: A 72-year-old woman presenting a malignant melanoma of the right eyelids and a 77-year-old man presenting a sebaceous carcinoma of the left upper eyelid underwent a total exenteration followed by positioning of endosseous implants (Straumann system Dental implants) as an integrated one-step combined surgical procedure. The oculofacial prosthesis was placed after epithelialization of the orbital cavity. RESULTS: The implants were perfectly osseointegrated without any complications, providing sufficient retention of the prostheses. A satisfactory aesthetic outcome has been achieved for both patients. CONCLUSIONS: Oculofacial prostheses anchored by osseointegrated dental implants placed as one-step surgical procedure ensure an adequate aesthetic result as well as a considerably decreased rehabilitation time and present a satisfactory solution when reconstruction is not a suitable option.

Wapello County, Township 72 North Range 12 West

Des Moines River Plat Maps.

Wapello County, Township 72 North Range 13 West

Des Moines River Plat Maps.