Modified Blalock Taussig shunt: a not-so-simple palliative procedure.

OBJECTIVES: Thirty-two consecutive isolated modified Blalock Taussig (BT) shunts performed in infancy since 2004 were reviewed and analysed to identify the risk factors for shunt intervention and mortality. METHODS: Sternotomy was the only approach used. Median age and weight were 10.5 (range 1-74) days and 2.9 (1.9-4.4) kg, respectively. Shunt palliation was performed for biventricular hearts (Tetralogy of Fallot/double outlet right ventricle/transposition of great arteries_ventricular septal defect_pulmonary stenosis/pulmonary atresia_ventricular septal defect/others) in 21, and univentricular hearts in 11, patients. Hypoplastic left heart syndrome patients were excluded. Two procedures required cardiopulmonary bypass. Median shunt size was 3.5 (3-4) mm and median shunt size/kg body weight was 1.2 (0.9-1.7) mm/kg. Reduction in shunt size was necessary in 5 of 32 (16%) patients. RESULTS: Three of 32 (9%) patients died after 3 (1-15) days due to cardiorespiratory decompensation. Lower body weight (P = 0.04) and bigger shunt size/kg of body weight (P = 0.004) were significant risk factors for mortality. Acute shunt thrombosis was observed in 3 of 32 (9%), none leading to death. Need for cardiac decongestive therapy was associated with univentricular hearts (P < 0.001), bigger shunt size (P = 0.054) and longer hospital stay (P = 0.005). Twenty-eight patients have undergone a successful shunt takedown at a median age of 5.5 (0.5-11.9) months, without late mortality. CONCLUSIONS: Palliation with a modified BT shunt continues to be indicated despite increased thrust on primary corrective surgery. Though seemingly simple, it is associated with significant morbidity and mortality. Effective over-shunting and acute shunt thrombosis are the lingering problems of shunt therapy.

The oxygen concentrator : an appropriate technology for treating hypoxaemic children in developing countries

RÉSUMÉ L'Organisation Mondiale de la Santé (OMS) recommande d'administrer l'oxygène par concentrateurs dans les pays en voie de développement (PVD), les cylindres posant des problèmes logistiques et financiers trop importants. Cette technologie a été proposée aux enfants d'un hôpital sénégalais (Ndioum) qui présentaient les critères d'oxygénation de l'OMS. Les bénéfices cliniques et financiers ont été majeurs. En revanche, les connaissances des soignants sur les diverses techniques d'administration d'oxygène ainsi que les prestations du service de maintenance étaient insuffisantes. L'implantation de concentrateurs doit être encouragée dans les PVD, mais doit respecter une stratégie englobant enseignement, maintenance et suivi de l'opération. Diverses actions correctrices ont été entreprises à Ndioum où plusieurs concentrateurs fonctionnent désormais régulièrement. Summary: The World Health Organisation (WHO) recommends supplying oxygen in developing countries by concentra¬tors because cylinders pose considerable logistic and financial problems. This technology was employed to treat children in a hospital in Ndioum, Senegal, who met the WHO oxygenation criteria. There were clear clinical and financial benefits, but neither the nurses' knowledge of the various techniques of oxygen supply nor the maintenance service were satisfactory. The use of concentra¬tors should be encouraged in developing countries. A strategy including technical training, maintenance and monitoring should be adopted. Corrective actions were undertaken in Ndioum, and several concentrators are now being used on a regular basis.

An Investigation of the Interstate 80 Rutting in Adair County, October 1983

This investigation was initiated to determine the causes of a rutting problem that occurred on Interstate 80 in Adair County. 1-80 from Iowa 25 to the Dallas County line was opened to traffic in November, 1960. The original pavement consisted of 4-1/2" of asphalt cement concrete over 12" of rolled stone base and 12" of granular subbase. A 5-1/2" overlay of asphalt cement concrete was placed in 1964. In 1970-1972, the roadway was resurfaced with 3" of asphalt cement concrete. In 1982, an asphalt cement concrete inlay, designed for a 10-year life, was placed in the eastbound lane. The mix designs for all courses met or exceeded all current criteria being used to formulate job mixes. Field construction reports indicate .that asphalt usage, densities, field voids and filler bitumen determinations were well within specification limits on a very consistent basis. Field laboratory reports indicate that laboratory voids for the base courses were within the prescribed limits for the base course and below the prescribed limits for the surface course. Instructional memorandums do indicate that extreme caution should be exercised when the voids are at or near the lower limits and traffic is not minimal. There is also a provision that provides for field voids controlling when there is a conflict between laboratory voids and field voids. It appears that contract documents do not adequately address the directions that must be taken when this conflict arises since it can readily be shown that laboratory voids must be in the very low or dangerous range if field voids are to be kept below the maximum limit under the current density specifications. A rut depth survey of January, 1983, identified little or no rutting on this section of roadway. Cross sections obtained in October, 1983, identified rutting which ranged from 0 to 0.9" with a general trend of the rutting to increase from a value of approximately 0.3" at MP 88 to a rut depth of 0.7" at MP 98. No areas of significant rutting were identified in the inside lane. Structural evaluation with the Road Rater indicated adequate structural capacity and also indicated that the longitudinal subdrains were functioning properly to provide adequate soil support values. Two pavement sections taken from the driving lane indicated very little distortion in the lower 7" base course. Essentially all of the distortion had occurred in the upper 2" base course and the 1..;1/2" surface course. Analysis of cores taken from this section of Interstate 80 indicated very little densification of either the surface or the upper or lower base courses. The asphalt cement content of both the Type B base courses and the Type A surface course were substantially higher than the intended asphalt cement content. The only explanation for this is that the salvaged material contained a greater percent of asphalt cement than initial extractions indicated. The penetration and viscosity of the blend of new asphalt cement and the asphalt cement recovered from the salvaged material were relatively close to that intended for this project. The 1983 ambient temperatures were extremely high from June 20 through September 10. The rutting is a result of a combination of adverse factors including, (1) high asphalt content, (2) the difference between laboratory and field voids, (3) lack of intermediate sized crushed particles, (4) high ambient temperatures. The high asphalt content in the 2" upper base course produced an asphalt concrete mix that did not exhibit satisfactory resistance to deformation from heavy loading. The majority of the rutting resulted from distortion of the 2" upper base lift. Heater planing is recommended as an interim corrective action. Further recommendation is to design for a 20-year alternative by removing 2-1/2" of material from the driving lane by milling and replacing with 2-1/2" of asphalt concrete with improved stability. This would be .followed by placing 1-1/2" of high quality resurfacing on the entire roadway. Other recommendations include improved density and stability requirements for asphalt concrete on high traffic roadways.

Evaluation de la satisfaction des infirmiers(-ères): développement et validation d'un nouvel outil d'analyse [Evaluation of satisfaction of nurses: development and validation of a new analysis tool]

A new device for the analyses of nurses' satisfaction has been developed and validated on two types of general and intensive treatments at the University Hospital in Vaudois, Switzerland. A questionnaire has been elaborated for identifying the variables linked with characteristics of the nurse's work, as well as personal variables of the employer which could have an influence on the level of satisfaction. In identifying the sources of satisfaction and dissatisfaction, it has been possible to propose recommendations and corrective measures in order to improve the level of global satisfaction of the nursing team.

Valoración periodontal de caninos incluidos en situación vestibular a los tres años del tratamiento orotodóncico-quirúrgico

Para demostrar que los parámetros periodontales no se alteran por la fenestración con colgajo de reposición apical de los caninos incluidos, se seleccionaron 12 pacientes con canino incluido por vestibular y el canino contralateral correctamente erupcionado. El tratamiento fue ortodóncico-quirúrgico, con colgajo de reposición apical (9 casos) o de reposición apical lateral (3 casos). Tres años después de finalizar el tratamiento ortodóncico, se valoró el estado periodontal de los caninos mediante: índice de plata, índice gingival, sangrado al sondaje, profundidad de sondaje y anchura de encía queratinizada. No se hallaron diferencias estadísticamente significativas entre el grupo experimental (caninos fenestrados) y el control (caninos contralaterales).

Bond strength of orthodontic brackets using different light and self-curing cements

The purpose of the study was to evaluate the shear bond strength of stainless steel orthodontic brackets directly bonded to extracted human premolar teeth. Fifty teeth were randomly divided into ¿ve groups: (1) System One (chemically cured composite resin), (2) Light Bond (light-cured composite resin), (3) Vivaglass Cem (self-curing glass ionomer cement), (4) Fuji Ortho LC (light-cured glass ionomer cement) used after 37% orthophosphoric acid¿etching of enamel (5) Fuji Ortho LC without orthophosphoric acid¿etching. The brackets were placed on the buccal and lingual surfaces of each tooth, and the specimens were stored in distilled water (24 hours) at 378C and thermocycled. Teeth were mounted on acrylic block frames, and brackets were debonded using an Instron machine. Shear bond strength values at fracture (Nw)were recorded. ANOVA and Student-Newman-Keuls multiple comparison tests were performed (P , .05). Bonding failure site was recorded by stereomicroscope and analyzed by Chi-square test, selected specimens of each group were observed by scanning electron microscope. System One attained the highest bond strength. Light Bond and Fuji Ortho LC, when using an acid-etching technique, obtained bond strengths that were within the range of estimated bond strength values for successful clinical bonding. Fuji Ortho LC and Vivaglass Cem left an almost clean enamel surface after debracketing.

Razonamiento terapéutico en un caso de protrusión de incisivos superiores. Caso clínico

El caso estudiado corresponde a una niña de 13 años y 1 mes, que acude a la consulta de ortodoncia por una ligera protrusión de incisivos superiores. Presenta una oclusión de clase I, molar y canina, y clase I esquelética. Con una discrepancia inferior de 4 mm, un patrón de crecimiento dólico, y un perfil recto con el surco supramentoniano borrado. Ante una paciente de estas características se nos plantean diversas posibilidades de tratamiento, con o sin extracciones, e incluso la posibilidad de no tratar.

Asphalt Cement Containing AC-13, HR-522, Construction Report, 1985

Stopping and turning maneuvers on high traffic volume asphalt cement concrete surfaced roads and streets often causes distortion of the pavement. Distortion may show up as excessive rutting in the wheel path, shoving of the pavement and/or rippling of the surface. Often times repeated corrective work such as cold milling or heater planing is required in these areas to maintain the pavement surface in a reasonable condition. In recent years polymer additives have been developed for asphalt cement concrete paving mixes that show promise in improving the inplace stability of the pavements. AC-13 (Styrelf 13) available from Bitucote Products Company, St. Louis, Missouri is an asphalt cement that has been modified by an additive to exhibit characteristics of very high stability in asphalt mixes.

Fuentes documentales de la ortodoncia

Se exponen las fuentes documentales más importantes para el estudio de la ortodoncia, como ciencia de la salud, dejando para un segundo artículo el listado específico de las fuentes bibliográficas propiamente dichas.

Aproximación a las fuentes bibliográficas de interés en Ortodoncia I

Se exponen las fuentes bibliográficas más importantes para el estudio de la ortodoncia, como ciencia de la salud, que viene a complementar el anterior artículo sobre "Fuentes documentales de la ortodoncia". Se relaciona la bibliografía ortodóncica aparecida en España.

Introducción a la farmacia galénica: un reto en primer año de farmacia

[spa] Este curso académico 2009-2010 se implanta el nuevo plan de estudios de Farmacia en la Universidad de Barcelona, diseñado según los planteamientos del EEES. Como consecuencia, y por primera vez en la historia de la Facultad de Farmacia de la UB, se imparte una asignatura troncal de cariz galénico en el primer año de la carrera. Esto constituye un nuevo reto para el Grupo de Innovación Docente de Tecnología Farmacéutica (GIDTF), dado que la asignatura Introducción a la Farmacia Galénica se ha de impartir a grandes grupos de estudiantes, al inicio de su carrera, mediante sesiones teóricas de 1,5 h. Excepcionalmente en este curso académico, la asignatura se imparte en el primer semestre y se repite en el segundo. En este trabajo se presenta el planteamiento metodológico presencial diseñado para esta asignatura, apoyado en estrategias no presenciales como foro de debate, recursos on-line, cuestionarios y tareas de autoevaluación a través de la plataforma Moodle del Campus Virtual de la UB, puesto que el equipo docente considera prioritario iniciar al estudiante en el uso de la misma en el primer año de carrera. Se han efectuado encuestas de satisfacción a los estudiantes que se han evaluado, así también como los resultados académicos obtenidos. En el análisis de los puntos fuertes y débiles de la metodología empleada, se han detectado evaluaciones positivas y también aspectos que podrían mejorarse, estableciendo las medidas correctoras adecuadas. En cuanto a los resultados académicos, han sido muy satisfactorios. [eng] This academic year 2009-2010, the new curriculum of Pharmacy according to the premises of the EHEA is started at the University of Barcelona. As a result, for the first time in the history of the Faculty of Pharmacy of UB, an obligatory galenic subject will be given during the first year of the career. This is a new challenge for Teaching Innovation Group of Pharmaceutical Technology (GIDTF), as the subject Introduction to Galenic Pharmacy is given by a team of teachers to large groups of students who began its career, through theoretical sessions of 1.5 h. The subject will be taught exceptionally this academic year in the first semester and repeated in the second. In this paper we present the methodological approach designed to face this subject, supported by virtual strategies as discussion forum, online resources, self-assessment test and work through the platform Moodle of the Virtual Campus UB, as the team considers it a priority to initiate the student in using it in the first year of pharmacy study. Were carried out satisfaction surveys to students and we have evaluated them, as well as academic performance. Through the analysis of the methodology, we detected positive evaluations and areas for improvement that have been used to establish appropriate corrective measures. Academic results have been very satisfactory.

The burnout syndrome and associated personality disturbances. The study in three graduate programs in Dentistry at the University of Barcelona

Objective: Determine the presence of"burnout" syndrome and characteristic personality patterns in the students and faculty of three graduate programs in Dentistry at the University of Barcelona: Department of Oral Surgery and Implantology, Department of Orthodontics and Department of Integrated Dentistry. Materials and Methods: The study was carried out in 78 dentists. The level of"burnout" was evaluated using the Maslach Burnout Inventory, socio-demographic variables and, finally, the personality test. Results: Oral surgeons constituted the group of highlevel"burnout". The profile of an individual with a propensity to"burn out" is a single man, with a median age of 27, that is in the first years of the graduate program and that combines studies with 30 hours of clinical practice and/or other work (p<0,05). Narcissistic and borderline are the types of personality most frequently found in the individuals that present"burnout" syndrome (p<0,05). Conclusions: In general, no high levels of"burnout" were registered in the studied population, only 2-3%, if applying strict definition of"burnout", and 10% if these criteria were amplified. We believe it is necessary to identify the individuals with a tendency towards"burnout", in order to establish preventive measures and avoid future negative behaviour at work as well as at the personal level.

Asphalt Cement Containing AC-13, HR-522, Final Report, 1988

Stopping and turning maneuvers on high traffic volume asphalt cement concrete surfaced roads and streets often cause distortion of the pavement. Distortion may show up as excessive rutting in the wheel path, shoving of the pavement and/or rippling of the surface. Often times repeated corrective work such as cold milling or heater planing is required in these areas to maintain the pavement surface in a reasonable condition. In recent years polymer additives have been developed for asphalt cement concrete paving mixes that show promise in improving the inplace stability of the pavements. AC-13 (Styrelf 13) available from Bitucote Products Company, St. Louis, Missouri is an asphalt cement that has been modified by an additive to exhibit characteristics of very high stability in asphalt mixes.

Yield and mineral nutrition of soybean, maize, and Congo signal grass as affected by limestone and slag

The objective of this work was to evaluate the efficiency of superficial application of limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soil acidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006 and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the off-seasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag is an efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.

On an IDS Model for Mobile Ad Hoc Networks

Manet security has a lot of open issues. Due to its character-istics, this kind of network needs preventive and corrective protection. Inthis paper, we focus on corrective protection proposing an anomaly IDSmodel for Manet. The design and development of the IDS are consideredin our 3 main stages: normal behavior construction, anomaly detectionand model update. A parametrical mixture model is used for behav-ior modeling from reference data. The associated Bayesian classi¯cationleads to the detection algorithm. MIB variables are used to provide IDSneeded information. Experiments of DoS and scanner attacks validatingthe model are presented as well.