Coxiella burnetii, the agent of Q fever in Brazil: its hidden role in seronegative arthritis and the importance of molecular diagnosis based on the repetitive element IS1111 associated with the transposase gene

Coxiella burnetii is the agent of Q fever , an emergent worldwide zoonosis of wide clinical spectrum. Although C. burnetii infection is typically associated with acute infection, atypical pneumonia and flu-like symptoms, endocarditis, osteoarticular manifestations and severe disease are possible, especially when the patient has a suppressed immune system; however, these severe complications are typically neglected. This study reports the sequencing of the repetitive element IS1111 of the transposase gene of C. burnetii from blood and bronchoalveolar lavage (BAL) samples from a patient with severe pneumonia following methotrexate therapy, resulting in the molecular diagnosis of Q fever in a patient who had been diagnosed with active seronegative polyarthritis two years earlier. To the best of our knowledge, this represents the first documented case of the isolation of C. burnetii DNA from a BAL sample.

Munc18c in adipose tissue is downregulated in obesity and is associated with insulin.

OBJECTIVE Munc18c is associated with glucose metabolism and could play a relevant role in obesity. However, little is known about the regulation of Munc18c expression. We analyzed Munc18c gene expression in human visceral (VAT) and subcutaneous (SAT) adipose tissue and its relationship with obesity and insulin. MATERIALS AND METHODS We evaluated 70 subjects distributed in 12 non-obese lean subjects, 23 overweight subjects, 12 obese subjects and 23 nondiabetic morbidly obese patients (11 with low insulin resistance and 12 with high insulin resistance). RESULTS The lean, overweight and obese persons had a greater Munc18c gene expression in adipose tissue than the morbidly obese patients (p<0.001). VAT Munc18c gene expression was predicted by the body mass index (B = -0.001, p = 0.009). In SAT, no associations were found by different multiple regression analysis models. SAT Munc18c gene expression was the main determinant of the improvement in the HOMA-IR index 15 days after bariatric surgery (B = -2148.4, p = 0.038). SAT explant cultures showed that insulin produced a significant down-regulation of Munc18c gene expression (p = 0.048). This decrease was also obtained when explants were incubated with liver X receptor alpha (LXRα) agonist, either without (p = 0.038) or with insulin (p = 0.050). However, Munc18c gene expression was not affected when explants were incubated with insulin plus a sterol regulatory element-binding protein-1c (SREBP-1c) inhibitor (p = 0.504). CONCLUSIONS Munc18c gene expression in human adipose tissue is down-regulated in morbid obesity. Insulin may have an effect on the Munc18c expression, probably through LXRα and SREBP-1c.

Major, minor, trace element, Sm-Nd and Sr isotope compositions of mafic rocks from the earliest oceanic crust of the Alpine Tethys

Recent isotopic and biochronologic dating has demonstrated that the Gets nappe contains remnants of the oldest part of the oceanic crust of the Alpine Tethys. The ophiolites are associated with deep sea sediments, platform carbonates and continental crustal elements suggesting a transitional environment between continental and oceanic crust. Therefore, the ophiolites from the Gets nappe provide the opportunity to assess the nature of mantle source and the magma evolution during the final rifting stage of the European lithosphere. Trace clement analyses of mafic rocks can he divided into two sets: (1) P, Zr and Y contents are consistent with those of mid-ocean ridge basalts and REE patterns have a P-MORB affinity. (2) P,Zr Ti and Y contents are compatible with within-plate basalts and are characterized by REE spectra similar to that of T-MORB. Both have Nd isotopic compositions similar to those of synrift magma of the Red Sea and to the Rhine Graben. The model ages are in agreement with an LREE-enriched subcontinental mantle source derived from depleted mantle 800 to 900 Ma ago. Minor, trace element and Sm-Nd compositions suggest that these rocks are basaltic relies of an earliest stage of oceanic spreading i.e. an embryonic ocean. Comparison between REE patterns, Nd and Sr isotope compositions, isotopic and biochronologic ages from different Alpine Tethys ophiolites shows that samples with enriched LREE are from the older ophiolitic suites and are relies of the embryonic ocean floor. Later phases of ocean spreading are characterized by basalts that are depleted in LREE.

Comparison of three commercially available radio frequency coils for human brain imaging at 3 Tesla.

OBJECTIVE: To evaluate a transverse electromagnetic (TEM), a circularly polarized (CP) (birdcage), and a 12-channel phased array head coil at the clinical field strength of B0 = 3T in terms of signal-to-noise ratio (SNR), signal homogeneity, and maps of the effective flip angle alpha. MATERIALS AND METHODS: SNR measurements were performed on low flip angle gradient echo images. In addition, flip angle maps were generated for alpha(nominal) = 30 degrees using the double angle method. These evaluation steps were performed on phantom and human brain data acquired with each coil. Moreover, the signal intensity variation was computed for phantom data using five different regions of interest. RESULTS: In terms of SNR, the TEM coil performs slightly better than the CP coil, but is second to the smaller 12-channel coil for human data. As expected, both the TEM and the CP coils show superior image intensity homogeneity than the 12-channel coil, and achieve larger mean effective flip angles than the combination of body and 12-channel coil with reduced radio frequency power deposition. CONCLUSION: At 3T the benefits of TEM coil design over conventional lumped element(s) coil design start to emerge, though the phased array coil retains an advantage with respect to SNR performance.

La perception de la productivité dans l'industrie hôtelière de luxe : le cas de la Suisse romande

La perception de la productivité SUMMARY The main objective of this thesis is the perception of the productivity in the luxury hospitality industry. Despite a lot of efforts which were already made in the field of the production of goods, this concept (productivity) still remains to be defined in the services sector, more still, in that of the luxury hospitality industry. Since the object of this study is the perception of productivity, we decided to analyze the elements considered to be relevant by the top management in this field. Then, it seemed important to evaluate these same elements for the categories of middle-management and by the in-line employees. As perception is not static, it is dependent in an indirect way on its improvement and however also with the means of improvement. The assumption of our work evokes the possible relationship between productivity and its perception (P), (Q) quality and profitability (R). On this basis we built the P-Q-R model: R=F(P,Q) Finally, our research on this model enabled us to establish a mathematical relation between the three predetermined elements: fR=fP+fQ+c That means that the function efficiency of a process of services -(fR) is the sum of its quality function (intrinsic and extrinsic)-(fP) and of its productivity function - fQ (and the constant of regression "c"). To increase the profitability of the most significant manner, it is necessary to increase at the same time the productivity and quality. On the other hand, according to this formula but also according to the perception of the managers, with a constant profitability, either the productivity decreases in favor of the increase in quality, or the reverse. If the dimensions of the model influence positively or negatively the production process of services, then those wí11 influence in same manner our model (P, Q, R). We advance a point of view saying that profitability depends on the labor productivity which follows same dynamics than the perception of the productivity. The identification of the labor productivity as an essential element of successful management of the hotel is fundamental. The question which always remains in suspense is however the relevance of the concept "labor productivity" for the luxury hospitality industry. It was not proven an obvious correlation between this notion and the one of profitability. We still remain at the stage of perception. It results that one interesting way of future research will be the study of this correlation. As in any kind of luxury industry, the real added value does not consist in the volume produced or in the speed with which the product/service is carried out but in the creativity involved in their results. Let us note that the field of luxury is extremely related to the emotions and to the experience provided to the customers. La perception de la productivité... RÉSUME L'objectif principal de cette thèse est la perception de la productivité dans l'hôtellerie de luxe. Malgré tous les efforts qui ont déjà été faits dans le domaine de la production de biens, ce concept (productivité) reste encore à définir dans le secteur des services, plus encore, dans celui de l'hôtellerie de luxe. Étant donné que l'objet de l'étude est la perception de la productivité, nous avons décidé d'analyser les éléments jugés pertinents par les cadres dirigeants dans ce domaine. Puis, il nous a semblé important d'évaluer ces mêmes éléments pour les catégories de cadres moyens et par les employés in-line. Comme la perception n'est pas statique, elle est liée d'une manière indirecte à son amélioration et cependant également aux moyens d'amélioration. L'hypothèse de notre travail évoque la possible relation entre la productivité et sa perception (P), la qualité (Q) et la rentabilité (R). Sur cette base nous avons construit le modèle P-Q-R de départ R=f(P,Q) Finalement, notre recherche sur ce modèle nous a permis d'établir une relation mathématique entre les trois construits prédéterminés: fR=fP+fQ+c Cela signifie que la fonction rentabilité d'un processus de services -(fR) est la somme de sa fonction qualité (intrinsèque et extrinsèque)-fP et de sa fonction productivité -fQ (plus la constante de régression « c ») Pour augmenter la rentabilité de la manière la plus significative, il faut augmenter en même temps la productivité et la qualité. En revanche, selon cette formule mais selon aussi la perception des managers, à une rentabilité constante, soit la productivité diminue en faveur de l'augmentation de la qualité, soit l'inverse. Si les dimensions du modèle influencent positivement ou négativement le processus de production de services, alors celles-ci vont influencer de la même manière les construits de notre modèle (P, Q, R). Nous avançons un point de vue disant que la rentabilité dépend de la productivité du travail qui suit la même dynamique que la perception de la productivité. L'identification de la productivité du travail comme élément essentiel de gestion réussie de l'hôtel s'avère fondamentale. La question qui reste toujours en suspens est pourtant la pertinence de la notion «productivité du travail » pour l'industrie hôtelière de luxe. Il n'a pas été prouvé une corrélation évidente entre cette notion et celle de la profitabilité. Nous restons donc ici encore au stade de perception. Il en résulte que l'une des voies les plus intéressantes de recherche future sera l'étude de cette corrélation. Comme dans toute industrie de luxe, la vraie valeur ajoutée ne consiste pas toujours dans le volume produit, ni dans la vitesse avec laquelle le produit/service est réalisé, mais parfois dans la créativité emmagasinée dans ces résultats. Notons que le domaine de luxe est extrêmement lié aux émotions et à l'expérience fournie aux clients.

Remediation of a marine shore tailings deposit and the importance of water-rock interaction on element cycling in the coastal aquifer

We present the study of the geochemical processes associated with the first successful remediation of a marine shore tailings deposit in a coastal desert environment (Bahia de Ite, in the Atacama Desert of Peru). The remediation approach implemented a wetland on top of the oxidized tailings. The site is characterized by a high hydrauliz gradient produced by agricultural irrigation on upstream gravel terraces that pushed river water (similar to 500 mg/L SO(4)) toward the sea and through the tailings deposit. The geochemical and isotopic (delta(2)H(water) and delta(18)O(water), delta(34)S(sulfate) , delta(18)O(sulfate)) approach applied here revealed that evaporite horizons (anhydrite and halite) in the gravel terraces are the source of increased concentrations of SO(4), Cl, and Na up to similar to 1500 mg/L in the springs at the base of the gravel terraces. Deeper groundwater interacting with underlying marine sequences increased the concentrations of SO(4), Cl, and Na up to 6000 mg/L and increased the alkalinity up to 923 mg/L CaCO(3) eq. in the coastal aquifer. These waters infiltrated into the tailings deposit at the shelf-tailings interface. Nonremediated tailings had a low-pH oxidation zone (pH 1-4) with significant accumulations of efflorescent salts (10-20 cm thick) at the surface because of upward capillary transport of metal cations in the arid climate. Remediated tailings were characterized by neutral pH and reducing conditions (pH similar to 7, Eh similar to 100 mV). As a result, most bivalent metals such as Cu, Zn, and Ni had very low concentrations (around 0.01 mg/L or below detection limit) because of reduction and sorption processes. In contrast, these reducing conditions increased the mobility of iron from two sources in this system: (1) The originally Fe(III)-rich oxidation zone, where Fe(II) was reduced during the remediation process and formed an Fe(II) plume, and (2) reductive dissolution of Fe(III) oxides present in the original shelf lithology formed an Fe-Mn plume at 10-m depth. These two Fe-rich plumes were pushed toward the shoreline where more oxidizing and higher pH conditions triggered the precipitation of Fe(HI)hydroxide coatings on silicates. These coatings acted as a filter for the arsenic, which naturally infiltrated with the river water (similar to 500 mu g/L As natural background) into the tailings deposit.

The hairy and enhancer of split 1 is a negative regulator of the repressor element silencer transcription factor.

Silencing of the transcriptional repressor REST is required for terminal differentiation of neuronal and beta-cells. In this study, we hypothesized that REST expression is controlled by hairy and enhancer of split 1 (HES-1), a transcriptional repressor that plays an important role in brain and pancreas development. We identified several N elements (CTNGTG) within the promoter of REST and confirmed that HES-1 associates with the endogenous promoter of REST. Moreover, using a cells model that overexpress HES-1 and a combination of experimental approaches, we demonstrated that HES-1 reduces endogenous REST expression. Taken together, these results indicate that HES-1 is an upstream negative regulator of REST expression.

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics

Mean intrinsic tensile properties of stone groundwood fibers from softwood

Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined