Estimates of genetic correlations between days to calving and reproductive and weight traits in Nelore cattle

Data comprising 53,181 calving records were analyzed to estimate the genetic correlation between days to calving (DC), and days to first calving (DFC), and the following traits: scrotal circumference (SC), age at first calving (AFC), and weight adjusted for 550 d of age (W550) in a Nelore herd. (Co)variance components were estimated using the REML method fitting bivariate animal models. The fixed effects considered for DC were contemporary group, month of last calving, and age at breeding season (linear and quadratic effects). Contemporary groups were composed by herd, year, season, and management group at birth; herd and management group at weaning; herd, season, and management group at mating; and sex of calf and mating type (multiple sires, single sire, or AI). In DFC analysis, the same fixed effects were considered excluding the month of last calving. For DC, a repeatability animal model was applied. Noncalvers were not considered in analyses because an attempt to include them, attributing a penalty, did not improve the identification of genetic differences between animals. Heritability estimates ranged from 0.04 to 0.06 for DC, from 0.06 to 0.13 for DFC, from 0.42 to 0.44 for SC, from 0.06 to 0.08 for AFC, and was 0.30 for W550. The genetic correlation estimated between DC and SC was low and negative (-0.10), between DC and AFC was high and positive (0.76), and between DC and W550 was almost null (0.07). Similar results were found for genetic correlation estimates between DFC and SC (-0.14), AFC (0.94), and W550 (-0.02). The genetic correlation estimates indicate that the use of DC in the selection of beef cattle may promote favorable correlated responses to age at first mating and, consequently, higher gains in sexual precocity can be expected.

Estimates of correction factors for lactation length and genetic parameters for milk yield in buffaloes

Estimaram-se fatores de correção para produção de leite aos 90, 240, 270 e 305 dias de lactação e parâmetros genéticos e de ambiente da produção de leite ajustada para esses períodos de lactação, utilizando-se 3888 lactações de 1630 búfalas, controladas entre 1987 e 2001, em 10 rebanhos do Estado de São Paulo. Os parâmetros genéticos foram estimados por meio do método da máxima verossimilhança restrita, livre de derivadas, aplicado a um modelo animal com medidas repetidas. As estimativas de herdabilidade para produção de leite corrigida para 90, 240, 270 e 305 dias de lactação foram 0,17; 0,15; 0,14 e 0,14, respectivamente. Nessa mesma ordem de apresentação, as estimativas de repetibilidade foram 0,40; 0,44; 0,41 e 0,41. As estimativas de correlação genética entre essas produções de leite corrigidas variaram de 0,96 a 1,00. Os fatores de correção multiplicativos para as diferentes classes de duração da lactação foram eficientes para ajustar a produção de leite aos 90, 240, 270 e 305 dias de lactação.

Estimativas de herdabilidade e tendências genéticas para características de crescimento e reprodutivas em bovinos da raça Nelore: Estimates of heritability and genetic trends for growth and reproduction traits in Nelore cattle

Foram estimados os coeficientes de herdabilidade e a mudança genética para peso à desmama (PD), peso ao sobreano (PS), ganho de peso do nascimento à desmama (GND), ganho de peso da desmama ao sobreano (GDS), perímetro escrotal (PE) e idade ao primeiro parto (IPP) em animais da raça Nelore. Foram utilizados dados de 128.148 animais nascidos entre 1984 e 2006. Os componentes de variância foram estimados pelo método da máxima verossimilhança restrita, e os valores genéticos foram preditos por modelos mistos aplicando-se modelo animal bicaracterística, incluindo peso à desmama em todas as análises. As tendências genéticas foram estimadas pela regressão dos valores genéticos sobre o ano de nascimento dos animais. Os coeficientes de herdabilidade do efeito direto estimados foram de 0,23 (0,07) (PD); 0,24 (0,02) (PS); 0,21 (0,01) (GND); 0,23 (0,01) (GDS); 0,46 (0,02) (PE) e 0,15 (0,01) (IPP). As tendências genéticas diretas estimadas foram de 0,171 (0,01); 0,219 (0,02); 0,186 (0,03) e 0,224 (0,02) kg/ano para PD, PS, GND e GDS, respectivamente, o que representa incrementos de 0,10; 0,08; 0,13 e 0,22% nas médias das mesmas características ao ano, respectivamente. Para o PE e a IPP no período de 1984 a 1995, as tendências genéticas foram nulas, com valores de 0,011 (0,03) cm/ano e -0,003 (0,06) dias/ano, respectivamente. No segundo período considerado (1996 a 2006), as tendências genéticas para PE e IPP foram de 0,069 (0,01) cm/ano e -3,024 (0,04) dias/ano, respectivamente, indicando melhorias consideráveis em tais características. Esses valores sugerem que características produtivas e reprodutivas, quando utilizadas como critério de seleção, proporcionam progresso genético no rebanho, sendo indicadas para seleção de animais da raça Nelore.

Estimates of genetic parameters for scrotal circumference using random regression models in Nelore cattle

A total of 15,901 scrotal circumference (SC) records from 5300 Nelore bulls, ranging from 229 to 560 days of age, were used with the objective of estimating (co)variance functions for SC, using random regression models. Models included the fixed effects of contemporary group and age of dam at calving as covariable (linear and quadratic effects). To model the population mean trend, a third order Legendre polynomial on animal age was utilized. The direct additive genetic and animal permanent environmental random effects were modeled by Legendre polynomials on animal age, with orders of fit ranging from 1 to 5. Residual variances were modeled considering 1 (homogeneity of variance) or 4 age classes. Results obtained with the random regression models were compared to multi-trait analysis. (Co)variance estimates using multi-trait and random regression models were similar. The model considering a third- and fifth-order Legendre polynomials for additive genetic and animal permanent environmental effects, respectively, was the most adequate to model changes in variance of SC with age. Heritability estimates for SC ranged from 0.24 (229 days of age) to 0.47 (300 days of age), remained almost constant until 500 days of age (0.52), decreasing thereafter (0.44). In general, the genetic correlations between measures of scrotal circumference obtained from 229 to 560 days of age decreased with increasing distance between ages. For genetic evaluation scrotal circumference could be measured between 400 and 500 days of age. (C) 2010 Elsevier B.V. All rights reserved.

Study of Stability of Rotational Motion of Spacecraft with Canonical Variables

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Optimal design of smart structures using bonded plezoelectrics for vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures which are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains, is a very important issue. For that purpose, smart material modelling, modal analysis methods, control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first one is related to the discrete optimal actuator location selection problem which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.

Optimal placement of piezoelectric sensor/actuators for smart structures vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures that are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains is a very important issue. For that purpose, smart material modeling, modal analysis methods, and control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first is related to the discrete optimal actuator location selection problem, which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.

Determination of the optimal quantity of crop residues for energy in sugarcane crop management using linear programming in variety selection and planting strategy

The aim of this work was to present organizational models for optimizing the reduction of crop residue generated by the sugarcane culture. The first model consisted of the selection of varieties of sugarcane to be planted meeting the mill requirements and, at the same time, to minimize the quantity of residue produced. The second model discussed the use of residue to produce energy. This is related to the selection of variety and quantity to be planted, in order to meet the requirements of the mill, to reduce the quantity of residue, and to maximize as much as possible the energy production. The use of linear programming was proposed. The two models presented similar results in this study, and both may be used to define the varieties and areas to be cultivated. (C) 2001 Published by Elsevier B.V. Ltd.

Theoretical estimates of consumable food and probability of acquiring food in larvae of Chrysomya putoria (Diptera: Calliphoridae)

An indirect estimate of consumable food and probability of acquiring food in a blowfly species, Chrysomya putoria, is presented. This alternative procedure combines three distinct models to estimate consumable food in the context of the exploitative competition experienced by immature individuals in blowfly populations. The relevant parameters are derived from data for pupal weight and survival and estimates of density-independent larval mortality in twenty different larval densities. As part of this procedure, the probability of acquiring food per unit of time and the time taken to exhaust the food supply are also calculated. The procedure employed here may be valuable for estimations in insects whose immature stages develop inside the food substrate, where it is difficult to partial out confounding effects such as separation of faeces. This procedure also has the advantage of taking into account the population dynamics of immatures living under crowded conditions, which are particularly characteristic of blowflies and other insects as well.

Toward reliable estimates of seed removal by small mammals and birds in the Neotropics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DENSITY ESTIMATES of THE BLACK-FRONTED PIPING GUAN IN THE BRAZILIAN ATLANTIC RAINFOREST

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutritional ecology of blowflies (Diptera, Calliphoridae): estimates of critical larval weight for pupation on two different diets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Binding three-particles at the edge of stability

The stability threshold for an Efimov state is determined as a function of the physical scales of the system. Light exotic nuclei and triatomic molecules are investigated. Scaling, universality, and renormalization-group invariance properties are discussed in this context.