Encouraging sustainable development in a coastal community: New Hanover County, North Carolina's exceptional design zoning district

While New Hanover County is the second smallest county in North Carolina, it is also the second most densely populated with approximately 850 people per square mile. Nestled between the Cape Fear River and Atlantic Ocean with surrounding barrier island beach communities, the County’s geographic location provides a prime vacation destination, as well as an ideal location for residents who wish to live at the water’s edge. Wilmington is the largest city in the County with a population just under 200,000. Most of the Wilmington metropolitan area is developed, creating intense development pressures for the remaining undeveloped land in the unincorporated County. In order to provide development opportunities for mixed use or high density projects within unincorporated New Hanover County where appropriate urban features are in place to support such projects without the negative effects of urban sprawl, County Planning Staff recently developed an Exceptional Design Zoning District (EDZD). Largely based on the LEED for Neighborhood Development program, the EDZD standards were scaled to fit the unique conditions of the County with the goal of encouraging sustainable development while providing density incentives to entice the use of the voluntary district. The incentive for the voluntary zoning district is increased density in areas where the density may not be allowed under normal circumstances. The rationale behind allowing for higher density projects is that development can be concentrated in areas where appropriate urban features are in place to support such projects, and the tendency toward urban sprawl can be minimized. With water quality being of high importance, it is perceived that higher density development will better protect water quality then lower density projects. (PDF contains 4 pages)

Exploratory survey of Malian and Ndururu traps in River Rima, north western Nigeria

The fabrication and operational techniques of Malian and Ndurutu traps mostly used by the fishermen in River Rima in north western Nigeria were evaluated through structured questionnaire and measurement of samples of the Data collected were analyzed using descriptive statistics. There was no standard in the dimensions of either of the traps. The traps were made of locally sourced materials, except the synthetic net of the Malian trap. About 81 and 80% of the respondents fabricated their Malian and Ndurutu traps, respectively. The major problems encountered in the structure and operation of the Malian trap included projection above water, stealing of catches and trap, and trapping of small sized fishes as indicated by 61.9, 47.6 and 28.6% of the respondents, respectively. In the case of the Ndurutu trap, 72.0, 48.0, 12.0 and 8.0% of the respondents respectively indicated poor durability, single entrance valve, destruction by cattle and instability in water, as the major problems encountered. As improvement measures for the Malian trap, the respondents suggested increase in number and size of valve (81.0%), horizontal positioning (57.1%) and square shape (47.6%) while 52.0% each suggested increase in number of entrance valve and netting of Ndurutu trap. The fishermen demonstrated ingenuity in the fabrication and operation of the traps, but they failed to initiate the required improvement. It is important to critically examine the designs, materials, costs and limitations of the traps and the suggestions of the fishermen, as basis for improvement on the technology of the traps

Evaluation of a new fishing pot trap (Lege) in River Rima, north western Nigeria

Based on the findings and diagnostic survey, a new fishing trap, christened Lege trap was designed and fabricated, and the performance evaluated. The 8-valve Lege trap was assessed concurrently with Malian and Ndurutu traps by the fishermen in the study area. The experiment was conducted in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity number, biomass and size were subjected to descriptive statistics and analysis of variance. The results showed that 22 fish species belonging to thirteen families were caught. The prototype (Lege) trap recorded higher species diversity index (0.90) than the Malian (0.50) and Ndurutu (0.50) traps. The Lege trap also accounted for the largest number (55%) and biomass (63%) of fish caught which was significantly (P<0.05) higher than those of the Malian and Nduutu traps were. The mean length (15.03~c5.70cm), weight (60.43~c48.61g) and girth (4.77~c1.65cm) of fishes caught in the Lege trap were also significantly (P0.05) higher than those caught in the other two traps. These results demonstrated better performance of the new trap than the two conventional traps, even though the sizes of some of the fish species caught in all the traps were below those allowed by the Sokoto State Fisheries Edict where the study was conducted. Therefore, since it is desirable to develop conservation-oriented trap at a least cost, it is necessary to research further on the number of valves and mesh size of the new trap

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass 48%) of fish caught in the 6-V Lege trap were significantly (P0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number, biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass (48%) of fish caught in the 6-V Lege trap were significantly (P<0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Aseismic deformation in subduction megathrusts : central Andes and north-east Japan

We aim to characterize fault slip behavior during all stages of the seismic cycle in subduction megathrust environments with the eventual goal of understanding temporal and spatial variations of fault zone rheology, and to infer possible causal relationships between inter-, co- and post-seismic slip, as well as implications for earthquake and tsunami hazard. In particular we focus on analyzing aseismic deformation occurring during inter-seismic and post-seismic periods of the seismic cycle. We approach the problem using both Bayesian and optimization techniques. The Bayesian approach allows us to completely characterize the model parameter space by searching a posteriori estimates of the range of allowable models, to easily implement any kind of physically plausible a priori information and to perform the inversion without regularization other than that imposed by the parameterization of the model. However, the Bayesian approach computational expensive and not currently viable for quick response scenarios. Therefore, we also pursue improvements in the optimization inference scheme. We present a novel, robust and yet simple regularization technique that allows us to infer robust and somewhat more detailed models of slip on faults. We apply such methodologies, using simple quasi-static elastic models, to perform studies of inter- seismic deformation in the Central Andes subduction zone, and post-seismic deformation induced by the occurrence of the 2011 Mw 9.0 Tohoku-Oki earthquake in Japan. For the Central Andes, we present estimates of apparent coupling probability of the subduction interface and analyze its relationship to past earthquakes in the region. For Japan, we infer high spatial variability in material properties of the megathrust offshore Tohoku. We discuss the potential for a large earthquake just south of the Tohoku-Oki earthquake where our inferences suggest dominantly aseismic behavior.