Comparative analysis of rabies virus isolates from Brazilian canids and bats based on the G gene and G-L intergenic region

Rabies virus (RABV) isolates from two species of canids and three species of bats were analyzed by comparing the C-terminal region of the G gene and the G-L intergenic region of the virus genome. Intercluster identities for the genetic sequences of the isolates showed both regions to be poorly conserved. Phylogenetic trees were generated by the neighbor-joining and maximum parsimony methods, and the results were found to agree between the two methods for both regions. Putative amino acid sequences obtained from the G gene were also analyzed, and genetic markers were identified. Our results suggest that different genetic lineages of RABV are adapted to different animal species in Brazil.

Detection and molecular characterization of a canine piroplasm from Brazil

In the beginning of the 20th century, a new canine disease was reported in Brazil under the name ""nambiuvu"", whose etiological agent was called Rangelia vitalii, a distinct piroplasm that was shown to parasitize not only erythrocytes, but also leucocytes and endothelial cells. In this new century, more publications on R. vitalii were reported from Brazil, including an extensive study on its ultrastructural analysis, in addition to clinical, pathological, and epidemiological data on nambiuvu. However, a molecular analysis of R. vitalii has not been performed to date. In the present study, we performed molecular phylogenetic analyses of R. vitalii based on fragments of the genes 18S rRNA and the heat shock protein 70 (hsp70), amplified by PCR performed on blood samples derived from five clinical cases of dogs presumably infected with R. vitalii in southern Brazil. In addition, we examined Giemsa-stained thin blood smears from these same dogs. DNA sequences (604-bp) of the 18S rRNA gene obtained from the five dogs were identical to each other, and by Blast analysis, this sequence shared the highest degree of sequence identity (95%) with Babesia sp. China-BQ1. DNA sequences (1056-bp) of the hsp70 gene obtained from the five dogs were identical to each other, and by Blast analysis, this sequence shared the highest degree of sequence identity (87%) with Babesia bigemina. Phylogenetic analyses inferred from either of the two genes resulted in the newly genotype being placed in the Babesia spp.sensu stricto clade with very high bootstrap support (95-100%) in three analyses (Neighbor-Joining, Maximum parsimony, and Maximum likelihood). Giemsa-stained thin blood smears from the dogs were shown to contain piroplasm organisms within erythrocytes, monocytes and neutrophils (individual forms), and schizont-like forms within neutrophils, in accordance with literature reports of R. vitalii. Based on these results, we conclude that R. vitalii, the etiological agent of ""nambiuvu"" in southern Brazil, is a valid species of piroplasm. Further studies are required to evaluate the validity of the genus Rangelia. (C) 2011 Elsevier B.V. All rights reserved.

Application of spatial analysis techniques to adjust for fertility trends and identify interplot competition in early stage sugarcane selection trials

Most sugarcane breeding programs in Australia use large unreplicated trials to evaluate clones in the early stages of selection. Commercial varieties that are replicated provide a method of local control of soil fertility. Although such methods may be useful in detecting broad trends in the field, variation often occurs on a much smaller scale. Methods such as spatial analysis adjust a plot for variability by using information from immediate neighbours. These techniques are routinely used to analyse cereal data in Australia and have resulted in increased accuracy and precision in the estimates of variety effects. In this paper, spatial analyses in which the variability is decomposed into local, natural, and extraneous components are applied to early selection trials in sugarcane. Interplot competition in cane yield and trend in sugar content were substantial in many of the trials and there were often large differences in the selections between the spatial and current method used by the Bureau of Sugar Experiment Stations. A joint modelling approach for tonnes sugar per hectare in response to fertility trends and interplot competition is recommended.

An atomistic simulation of solid state sintering using Monte Carlo methods

This paper presents results on the simulation of the solid state sintering of copper wires using Monte Carlo techniques based on elements of lattice theory and cellular automata. The initial structure is superimposed onto a triangular, two-dimensional lattice, where each lattice site corresponds to either an atom or vacancy. The number of vacancies varies with the simulation temperature, while a cluster of vacancies is a pore. To simulate sintering, lattice sites are picked at random and reoriented in terms of an atomistic model governing mass transport. The probability that an atom has sufficient energy to jump to a vacant lattice site is related to the jump frequency, and hence the diffusion coefficient, while the probability that an atomic jump will be accepted is related to the change in energy of the system as a result of the jump, as determined by the change in the number of nearest neighbours. The jump frequency is also used to relate model time, measured in Monte Carlo Steps, to the actual sintering time. The model incorporates bulk, grain boundary and surface diffusion terms and includes vacancy annihilation on the grain boundaries. The predictions of the model were found to be consistent with experimental data, both in terms of the microstructural evolution and in terms of the sintering time. (C) 2002 Elsevier Science B.V. All rights reserved.

Epidemiological significance of subterranean Aedes aegypti (Diptera : Culicidae) breeding sites to dengue virus infection in charters towers, 1993

The objective of this study was to determine the epidemiological significance of subterranean mosquito breeding sites to the 1993 outbreak of dengue fever (type 2) in the northern Queensland town of Charters Towers, Australia. In recent studies on subterranean mosquito breeding, containers such as wells and service manholes have been shown to be important breeding sites to Australia's only dengue vector, Aedes aegypti (L.). This study demonstrates a direct epidemiological association between subterranean breeding sites and dengue virus infection. The mean distance between residents seropositive for dengue 2 and the nearest subterranean container (113 m) was significantly less than for a randomly selected control (191 m), (F = 81.9; df = 1, 478; P < 0.001). Residents positive for dengue 2 antibodies was 2.47 (95% confidence interval 1.88-3.24) times higher for those living within 160 m of a well or service manhole, compared with those residing further away. These findings emphasize the importance of including subterranean water containers in Ae. aegypti surveillance and control programs.

Effect of cold wire inclination on temperature fluctuation measurements in a heated jet

Hot-wire anemometers at low operating currents are used as fast response resistance thermometers for the study of heated turbulent flows. Simultaneous measurement of temperature and velocity is generally performed with multi-wire arrays. In order to give good spatial resolution a new layout has been tested which uses an inclined temperature wire positioned parallel to the nearest inclined velocity wire. This leads to an asymmetric wire arrangement relative to the mean flow direction. As expected, a reduction in thermal interference from the velocity wires results when compared with an array containing a temperature wire placed normal to the flow. However, measurement of higher order moments of fluctuating quantities in an axisymmetric jet shows considerable distortion of radial distributions which is traced to alteration of the temperature field sensed by the temperature wire. When inclined velocity sensitive wires contain a temperature component, the latter may be affected by the same phenomenon.

Are Ichthyosporea animals or fungi? Bayesian phylogenetic analysis of elongation factor 1α of Ichthyophonus irregularis

Ichthyosporea is a recently recognized group of morphologically simple eukaryotes, many of which cause disease in aquatic organisms. Ribosomal RNA sequence analyses place Ichthyosporea near the divergence of the animal and fungal lineages, but do not allow resolution of its exact phylogenetic position. Some of the best evidence for a specific grouping of animals and fungi (Opisthokonta) has come from elongation factor 1alpha, not only phylogenetic analysis of sequences but also the presence or absence of short insertions and deletions. We sequenced the EF-1alpha gene from the ichthyosporean parasite Ichthyophonus irregularis and determined its phylogenetic position using neighbor-joining, parsimony and Bayesian methods. We also sequenced EF-1alpha genes from four chytrids to provide broader representation within fungi. Sequence analyses and the presence of a characteristic 12 amino acid insertion strongly indicate that I. irregularis is a member of Opisthokonta, but do not resolve whether I. irregularis is a specific relative of animals or of fungi. However, the EF-1alpha of I. irregularis exhibits a two amino acid deletion heretofore reported only among fungi. (C) 2003 Elsevier Science (USA). All rights reserved.

Os sentidos das experiências compartilhadas pelas professoras em processos de formação continuada na rede municipal de ensino de Marilândia–Espírito Santo

Investiga as relações entre a formação continuada de professores e as práticas de partilha das experiências construídas na atuação docente nos anos iniciais do ensino fundamental, numa escola da Rede Municipal de Ensino de Marilândia–ES. Questiona, com base nas narrativas de cinco professoras, como a experiência compartilhada nos processos de formação continuada de professores dos anos iniciais do ensino fundamental na Rede Municipal de Ensino de Marilândia–ES é vivida e percebida por elas e quais sentidos são produzidos sobre a formação continuada. Pressupõe a perspectiva de uma formação continuada em processo, ao longo da vida, desenvolvida em redes coletivas de trabalho e partilha de experiências no cotidiano escolar e na vida das professoras. Em face dessa complexidade, a pesquisa de caráter qualitativo e abordagem metodológica ancorada na pesquisa narrativa (auto)biográfica tem, como procedimentos de investigação, as entrevistas biográficas direcionadas para a construção de narrativas orais e escritas, a observação participante dos sujeitos da pesquisa em momentos formativos instituídos, a análise de documentos da Secretaria Municipal de Educação de Marilândia e da escola e a aplicação de questionário para composição de dados acerca do perfil dos sujeitos da pesquisa. A definição do caminho metodológico deste estudo teve inspiração em Benjamin e Larrosa e, no campo da formação de professores, sustentação nos referenciais de Nóvoa, Souza, Freire e Giroux. Os resultados apontam uma variedade de sentidos sobre a formação continuada de professores, desde formas mais institucionalizadas até iniciativas menos formais, vividas por meio da partilha de experiências e de processos (auto)formativos, que contribuem para o desenvolvimento pessoal e profissional do professor e organizacional da escola, de modo mais aproximado do trabalho pedagógico na unidade escolar e na sala de aula. Aponta a necessidade da valorização das experiências dos professores e do investimento no estudo das práticas. Considera a existência, entre os professores, de uma responsividade compartilhada sobre a formação do outro, compondo um coletivo instituinte na escola. Assinala a potencialidade da pesquisa narrativa (auto)biográfica como opção metodológica que possibilita o entrecruzamento dos movimentos investigativos e formativos.

Estudo do efeito da adição de gás condensado sobre o ponto de fluidez e a viscosidade de petróleos pesados

Neste trabalho foi estudado o comportamento de quatro óleos pesados, com densidade API variando de 13,7 a 21,6, frente à adição de gás condensado, com o objetivo de se obter informações relevantes para o processo de escoamento destes óleos. Assim, foi analisado o comportamento da densidade à 20 °C, pontos de fluidez máximo e mínimo, e viscosidade dinâmica à 50 °C dos óleos contendo diferentes concentrações de gás condensado. Também foi analisado o efeito da variação da temperatura sobre a viscosidade dos óleos crus, e, adicionalmente, após o estudo do efeito do gás condensado sobre os óleos, foi avaliado o comportamento da viscosidade dinâmica dos mesmos com a adição de diferentes solventes orgânicos (querosene, aguarrás e tolueno). Os resultados obtidos indicaram que o gás condensado foi eficiente para a redução da densidade, dos pontos de fluidez máximo e mínimo e da viscosidade dos quatros óleos analisados. O óleo A apresentou uma taxa de decaimento da densidade mais baixa do que os outros óleos e foi o que apresentou o comportamento mais próximo de mistura ideal. A amostra de óleo mais pesada (óleo D) foi a que apresentou as maiores variações nos valores dos pontos de fluidez máximo e mínimo com a adição de condensado, chegando a reduzir um total de 19 °C no ponto de fluidez máximo e um total de 21 °C no ponto de fluidez mínimo com a adição de apenas 10,7% v/v de gás condensado. Nos resultados obtidos nas análises da viscosidade dinâmica observou-se que a grande maioria das misturas preparadas apresentou um comportamento de fluido newtoniano. Todas as amostras apresentaram uma notável diminuição da sua viscosidade, chegando a atingir valores percentuais de redução de viscosidade que variaram entre 75 e 91%, na concentração de 14% v/v de gás condensado. A partir desta concentração a viscosidade continua a decair, porém de forma mais atenuada, e o uso do condensado acima desta concentração pode significar gastos desnecessários com o solvente com a finalidade de se reduzir a viscosidade de óleos pesados. O óleo D foi o que apresentou os maiores percentuais de redução da viscosidade enquanto o óleo B foi o que apresentou os mais baixos valores. Comparando o gás condensado aos outros três solventes orgânicos testados, o condensado apresentou um comportamento bem semelhante ao tolueno quando analisadas as suas capacidades de redução da viscosidade dos óleos estudados.

Swords into ploughshares? China's Soft Power strategy in Southeast Asia and its challenges1

Since the 1990s, alongside China's economic growth, the international community has fostered a general anxiety towards a "China threat." In order to relieve itself from suspicion, China adopted the dual strategies of "harmonious worldview" and "good neighbor policy." The strategies led to the use of soft power in China's foreign policy. China aimed to reduce security concerns implied by the threat theory by supporting an image that caters to international peace and development. This article seeks to explain how China achieves its interests in Southeast Asia through the use of soft power. The authors address the concepts of "harmonious worldview" and "good neighbor policy" and how the twin strategies and soft power have shaped China's foreign policy in recent years. This article aims to provide insights into China's policy options in Southeast Asia in the near future.

Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene–butadiene–styrene/multiwal carbon nanotubes composites

Composites of styrene–butadiene–styrene (SBS) block copolymer with multiwall carbon nanotubes were processed by solution casting to investigate the influence of filler content, the different ratios of styrene/butadiene in the copolymer and the architecture of the SBS matrix on the electrical, mechanical and electro-mechanical properties of the composites. It was found that filler content and elastomer matrix architecture influence the percolation threshold and consequently the overall composite electrical conductivity. Themechanical properties aremainly affected by the styrene and filler content. Hopping between nearest fillers is proposed as the main mechanism for the composite conduction. The variation of the electrical resistivity is linear with the deformation. This fact, together with the gauge factor values in the range of 2–18, results in appropriate composites to be used as (large) deformation sensors.

Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene–butadiene–styrene/multiwall carbon nanotubes composites

Composites of styrene–butadiene–styrene (SBS) block copolymer with multiwall carbon nanotubes were processed by solution casting to investigate the influence of filler content, the different ratios of styrene/butadiene in the copolymer and the architecture of the SBS matrix on the electrical, mechanical and electro-mechanical properties of the composites. It was found that filler content and elastomer matrix architecture influence the percolation threshold and consequently the overall composite electrical conductivity. The mechanical properties are mainly affected by the styrene and filler content. Hopping between nearest fillers is proposed as the main mechanism for the composite conduction. The variation of the electrical resistivity is linear with the deformation. This fact, together with the gauge factor values in the range of 2–18, results in appropriate composites to be used as (large) deformation sensors.

Modeling Carbon Nanotube Electrical Properties in CNT/Polymer Composites

In this work it is demonstrated that the capacitance between two cylinders increases with the rotation angle and it has a fundamental influence on the composite dielectric constant. The dielectric constant is lower for nematic materials than for isotropic ones and this can be attributed to the effect of the filler alignment in the capacitance. The effect of aspect ratio in the conductivity is also studied in this work. Finally, based on previous work and by comparing to results from the literature it is found that the electrical conductivity in this type of composites is due to hopping between nearest fillers resulting in a weak disorder regime that is similar to the single junction expression.

Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Contributo para o estabelecimento de níveis de referência de diagnóstico em equipamentos de TC multidetectores

Actualmente a Tomografia Computorizada (TC) é um dos métodos de diagnóstico por imagem que tem uma maior contribuição para a dose de radiação X recebida pelos pacientes. Pretende-se com este estudo avaliar as doses praticadas em TC e contribuir para o estabelecimento de Níveis de Referência de Diagnóstico (NRD) na região da Grande Lisboa, Portugal. Foram efectuadas medições de dose em 5 equipamentos de TC multidetectores, considerando o abdómen como área anatómica de interesse. Recorreu-se a uma câmara de ionização e a um fantoma para obter o índice de dose de TC (CTDI) e o produto dose-comprimento (DLP), que permitem determinar os NRD. Estes valores foram comparados com os NRD propostos pela Guideline Europeia e com os estudos desenvolvidos em outros países, como o Reino Unido, Grécia e Taiwan. Os resultados revelaram que os valores de NRD obtidos neste estudo (16,7 mGy para o CTDIvol e 436,5 mGy·cm para o DLP) são discrepantes relativamente à Guideline Europeia (±50%), mas muito próximos relativamente aos NRD estabelecidos nos países considerados. Estes valores podem ser eventualmente explicados pelos equipamentos em análise e pela utilização de protocolos de exame adoptados pelos profissionais de Radiologia nas instituições analisadas. ABSTRACT - Nowadays Computed Tomography (CT) is one of the imaging techniques which have a large contribution to radiation dose received by patients. The purpose of this study is to evaluate CT doses and contribute to the establishment of Diagnostic Reference Levels (DRL) in Lisbon, Portugal. Dose measurements on 5 multidetector CT scanners have been performed, considering the abdomen as the anatomic region of interest. All measurements were performed using an ionization chamber and a phantom to obtain the index CT dose (CTDI) and the dose-length product (DLP), which are used to determine DRL. These values were compared not only with European reference dose values but also with DRL studies developed in other countries like United Kingdom, Greece and Taiwan. The results revealed that DRL values obtained in this study (CTDIvol is 16,7 mGy and DLP is 436,5 mGy·cm) have a higher discrepancy to European Guideline (±50%), while the DRL´s of other countries are nearest to values obtained in this study. Those differences may be eventually explained by the type of the evaluated equipments but also by the exam protocols used by the Radiology professionals on the analyzed institutions.