Quantitative characterization of multi-phase materials by digital image processing

An automatic image processing and analysis technique has been developed for quantitative characterization of multi-phase materials. For the development of this technique is used the Khoros system that offers the basic morphological tools and a flexible, visual programming language. These techniques are implemented in a highly user oriented image processing environment that allows the user to adapt each step of the processing to his special requirements.To illustrate the implementation and performance of this technique, images of two different materials are processed for microstructure characterization. The result is presented through the determination of volume fraction of the different phases or precipitates.

Influence of aged Ti-15V-3Cr-3Sn-3Al alloy microstructure on chemical and electrochemical behavior in the Kroll reagent for metallographic etching

The chemical and electrochemical behaviour of the Ti-1 5V-3Cr-3Sn-3Al alloy in Kroll reagent has been studied after ageing at 350-600degreesC, to optimise metallographic etching. Etching tests and polarisation curves showed that samples aged at higher temperatures have been more susceptible to corrosion. It has been attributed to the formation of intra- and intergranular alpha-phase precipitates during ageing.

Quantitative fractography under light microscopy: A digital image processing approach

This work is an example of the improvement on quantitative fractography by means of digital image processing and light microscopy. Two techniques are presented to investigate the quantitative fracture behavior of Ti-4Al-4V heat-treated alloy specimens, under Charpy impact testing. The first technique is the Minkowski method for fractal dimension measurement from surface profiles, revealing the multifractal character of Ti-4Al-4V fracture. It was not observed a clear positive correlation of fractal values against Charpy energies for Ti-4Al-4V alloy specimens, due to their ductility, microstructural heterogeneities and the dynamic loading characteristics at region near the V-notch. The second technique provides an entire elevation map of fracture surface by extracting in-focus regions for each picture from a stack of images acquired at successive focus positions, then computing the surface roughness. Extended-focus reconstruction has been used to explain the behavior along fracture surface. Since these techniques are based on light microscopy, their inherent low cost is very interesting for failure investigations.

Digital Light Microscopy of Macroporous Ceramics Processed by Consolidation Casting with Mixtures of Native Starches

Porosity in starch consolidation casting technique is rightly related to original size and morphology of starch granules, leaving a pore structure after burning out. This work reports the results for the addition of different native potato and corn starch proportions in suspension,; with TiO(2) (rutile) powder. Gelling temperature have been defined after observation under light microscopy using a heating stage. Analysis of porous network and isolated pores have been clone from images of samples surfaces obtained by depth from focus reconstruction, revealing a qualitative correlation of pores characteristics and starches additions in suspensions, suggesting that the presence of isolated or interconnected pores can be handled by starches selection to control the amylopectin and amylose contents in slurries. Also, the analysis of porous fraction distribution shows no consistent pattern through specimens' volume according to starches in mixtures.

Stratified Sampling Applied to Estimation of the Volumetric Fraction of Alumina in Cast Metal Matrix Composites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

As condições e o sentido do trabalho doméstico realizado por adolescentes que residem no local de emprego

The house work is a reality for girls of humble class and one of the most found forms of work among adolescent workers. Moreover, it is a mean of work which reproduces poverty and gender relations within the society. The purpose of this essay in to understand the house work in the life of adolescent workers, emphasizing the meaning produced by these teenagers concerning the job they perform. In order to achieve such goal, questionnaires were applied to 332 adolescents, under 18 years old from public schools (from EJA-supletivo) in Natal, with the purpose of mapping the registration of this activity among young students. Next, 14 adolescents were interviewed in order to recognize the meaning of this work and its repercussions over the teenagery, such as school education, socialization, relations with employers and adolescent s self-image. Later we have noticed most workers among the students from public schools are housemaids. Furthermore, this work is used as a form of social ascension and it contributes for the search for better opportunities in the state capital for adolescents who leave the countryside trying to agree to education and remuneration. This work plays an important role, which is to reproduce gender relations, as a woman works to maintain the private space as a female space and maintains the man out of this relation. Besides it reproduces class relations, ethny and generation conflicts, in which the employer replaces the control the parents have in the adolescent s life. Summing up, this study about house work have negative aspects, related to exploitation, humiliation and mistreat, as well as positive ones, for it permits the adolescent to improve his life conditions. The most important thing is to look for a mean of work in which human and workers rights are respected

Fishes of the Atlantic Rainforest of Boraceia: testimonies of the Quaternary fault reactivation within a Neoproterozoic tectonic province in Southeastern Brazil

The upper portion of the Rio Guaratuba, located in the Serra do Mar coastal range of Southeastern Brazil, shows biological and geological evidences of being captured and diverted away from its original course in the direction of the Parana River Basin to become a coastal river due to the Quaternary activity of NW-trending faults. Despite draining directly to the Atlantic Ocean, the upper portion of the Guaratuba still maintains an ichthyofauna that is typical of the adjoining Parana River Basin rather than the characteristic fish fauna of the Brazilian coastal drainages. The fish fauna of the upper Guaratuba is an evident testimony of the tectonic process that allowed the faunal interchange between the upland basins and the coastal drainages that probably has been taking place in Southeastern Brazil throughout the long geological history of the passive Brazilian continental margin.

Interaction of the Anti-Inflammatory Annexin A1 Protein and Tacrolimus Immunosuppressant in the Renal Function of Rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structure and composition of the stream ichthyofauna of four tributary rivers of the upper Rio Parana basin, Brazil

The ichthyofauna of 24 stretches of streams, all of 100 m length and of fifth or lower order and most of second and third order, were sampled along four left bank tributaries (Rio do Peixe, Rio Aguapei, Rio Sao Jose dos Dourados, lower Rio Tiete of the main channel of the Rio Parana in the state of São Paulo, southeastern Brazil. Sampling of the fish fauna at each of the six sites in the four basins incorporated a standardized fish collecting methodology and a standardized documentation of environmental data serving as the basis for a comparative analysis of the collecting locations. The 8,189 fish specimens collected represented six orders, 18 families, 42 genera, and 56 species, with a total biomass of 28.8 kg. Approximately 52% of the collected species were characiforms, 28% siluriforms, 9% gymnotiforms, 5% cyprinodontiforms, 4% perciforms, and 2% synbranchiforms. The most abundant of the species were the characiforms Astyanax altiparanae (15% of total) and Knodus moenkhausii (12% of total). The two species with the largest overall biomasses were A. altiparanae (34% of total biomass) and the siluriform Hypostomus sp. (8% of total biomass). Analysis of the trophic structure of the studied ichthyofauna indicated that the 10 numerically dominant species across the 24 sampled streams can be grouped into five guilds that are in decreasing order of numerical importance: omnivores, insectivores, insectivores/invertivores, periphytivores, and algivores. Species richness in the sampled stream stretches varied from six to 20 species with an average richness of 14. The species richness estimated by extrapolation for all 24 sampled stream stretches was 67 species. The Characidae are predominant among the collected specimens with approximately 50% of both individuals and biomass, a fact hypothesized to be a function of several attributes typical of the family. Six of the 56 collected species were new to science and six other species are of indefinite taxonomic status and require further analysis in order to determine their identity.

Hisonotus piracanjuba, a new species of Hypoptopomatinae (Siluriformes: Loricariidae) from the rio Paranaiba, upper rio Parana system, central Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dichloro(cyclohexilidene-1-methylene)(phenyl)Te(IV). Looking for the theoretical treatment

C(13)H(16)Cl(2)Te,M(r)=370.76,P2(1)/a, a = 8.1833(8), b = 8.4163(8), c = 20.787(2) A, beta = 99.52(1)degrees, Z = 4, R(1) = 0,0275. The primary coordination around the Te(IV) atom is consistent with a pseudo-trigonal bipyramidal bond configuration with two Cl atoms occupying axial positions while the C atoms and the lone pair of electrons occupy the equatorial positions. The Te(IV) atom is involved in an intermolecular secondary interaction resulting in the self assembly of zigzag-chains supramolecular array. In order to determine the theoretical basis set for the Te atom which leads to the best agreement with the experimental data, a large series of geometry optimizations were performed on dichloro dimethyl Te(IV), as a model compound, and the results compared with the mean distances and angles obtained from 45 X-ray structures. The Ahlrichs basis set plus the Hay & Wadt ECP was selected and used for a series of calculations performed on the title compound.

Crystal structure of bis(acetylacetonato)bis(quinoline)nickel(II), Ni(C5H14O2N)(2)(C9H7N)(2)

C28H28N2NiO4, triclinic, P (1) over bar (no. 2), a = 7.9202(6) angstrom, b = 8.0496(6) angstrom, c = 10.246(1) angstrom, alpha = 97.15(1)degrees, beta = 106.68(1)degrees, gamma = 94.686(9)degrees, V = 616.1 angstrom(3), Z = 1, R-gt(F) = 0.028, wR(ref)(F-2) = 0.078, T = 293 K.

THE CRYSTAL-STRUCTURE OF BENZOYL-HISTIDINE MONOHYDRATE

The crystal structure of benzoyl-histidine monohydrate (BYLH hereafter), C-13H-12N-3O-3. H2O was determined from three dimensional data of 3012 independent reflections measured on a Enraf-Nonius (CAD4) single crystal diffractometer. The compound crystallizes in the orthorhombic space group P2(1)2(1)2(1) with cell dimensions alpha = 7.102(1) angstrom, b = 13.783(3) angstrom, c = 14.160(4) angstrom, V = 1385.92 angstrom-3, F.W. = 277.28, F(000) = 584 Q(calc) = 1.32 g cm-3 and Z = 4.The structure was solved with direct methods. All positional and anisotropic thermal parameters were refined by full-matrix least-squares calculations. The final reliability factor was R = 0.040, while the weighted one was Rw = 0.034. The H atoms found in the difference Fourier map were refined isotropically.The compound consists of a histidine molecule bound to a benzoyl group. There is also a cocrystallized water molecule stabilized through a hydrogen bridge.The 5-membered ring of the histidine has its tautomeric form, after the transfer of the H atom from the N(delta) to the N(epsilon) atom of the ring. There is an sp2 conformation around C6 while the conformation around C3 is that of sp3. The histidine ring forms with the benzene ring a dihedral angle of 109.8(1)-degree.All angle values and bond distances agree very well with the expected values in the literature.

Crystal structure of bis(benzyltriethylammonium) hexachlorotellurate(IV), [C7H7(C2H5)(3)N](2)(TeCI6)

C26H44Cl6N2Te, monoclinic, P12(1)/n1 (no. 14), a = 9.3981(5) Angstrom, b = 14.606(1) Angstrom, c = 12.4524(7) Angstrom, beta = 108.335(5)degrees, V = 1622.6 Angstrom(3), Z = 2, R-gt(F) = 0.024, wR(ref)(F-2) = 0.065, T = 293 K.

Crystal structure of potassium trifluoro(2-methyl-1,3-dithiano)borate, K(C5H9BF3S2)

C5H9BF3KS2, triclinic, P (1) over bar (no. 2), a = 11.9238(5) angstrom, b = 13.6060(5) angstrom, c = 14.0280(3) angstrom, alpha = 114.995(2)degrees, beta = 92.035(2)degrees, gamma = 92.390(2)degrees, V = 2057.4 angstrom(3), Z = 8, R-gt(F) = 0.049, wR(ref)(F-2) = 0.117, T = 296 K.