966 resultados para Moving in the USSR
Resumo:
Title from caption.
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-06
Resumo:
The results of two experiments are reported that examined how performance in a simple interceptive action (hitting a moving target) was influenced by the speed of the target, the size of the intercepting effector and the distance moved to make the interception. In Experiment 1, target speed and the width of the intercepting manipulandum (bat) were varied. The hypothesis that people make briefer movements, when the temporal accuracy and precision demands of the task are high, predicts that bat width and target speed will divisively interact in their effect on movement time (MT) and that shorter MTs will be associated with a smaller temporal variable error (VE). An alternative hypothesis that people initiate movement when the rate of expansion (ROE) of the target's image reaches a specific, fixed criterion value predicts that bat width will have no effect on MT. The results supported the first hypothesis: a statistically reliable interaction of the predicted form was obtained and the temporal VE was smaller for briefer movements. In Experiment 2, distance to move and target speed were varied. MT increased in direct proportion to distance and there was a divisive interaction between distance and speed; as in Experiment 1, temporal VE was smaller for briefer movements. The pattern of results could not be explained by the strategy of initiating movement at a fixed value of the ROE or at a fixed value of any other perceptual variable potentially available for initiating movement. It is argued that the results support pre-programming of MT with movement initiated when the target's time to arrival at the interception location reaches a criterion value that is matched to the pre-programmed MT. The data supported completely open-loop control when MT was less than between 200 and 240 ms with corrective sub-movements increasingly frequent for movements of longer duration.
Resumo:
Carbonate sediments are dynamic three-dimensional environments where the surface layers are constantly moving and mixing due to the energy of the water column. It is also an environment of dynamic biological, chemical and physical interaction and modification. The biological community can actively influence changes to sediment characteristics and associated biochemistry. Bioturbation resulting from macrofaunal activity disrupts sediment structure and biochemical arrangements and reduces the critical shear forces required to move sediment particles, adding to the dynamic and complex physical and biogeochemical nature of the sediment. Laboratory studies using both planner optodes and glass needle microsensors were used to measure abiotic sediment characteristics such as the depth distribution and concentrations of PAR. The biochemical nature of coral reef sediment were also investigated, specifically the quantification and the distribution of dissolved oxygen within coarse and fine-grained sediments under regimes of light and darkness. Results highlighted the significant contribution microalgal productivity and bioturbation has on distribution of dissolved oxygen in the upper sediment layers. On the reef flat a shallow water lander system was employed to measure concentrations of O2, pH, S, Ca and temperature over periods of 24 to 48 hours in coarse and fine-grained sediments. Similarities between laboratory and in situ results where evident, however the in situ environment was more dynamic and the distribution and concentrations of dissolved oxygen were more complex and correlated to irradiance, temperature and biological activity. Microsensor technology provides us with the opportunity to study, at very high resolutions, the upper irradiated; photosynthetically active regions of aquatic sediments along with anoxic processes deeper in sub-euphotic regions of the sediments.
Resumo:
A comprehensive introduction to the technology, development and management of business information systems. The book assumes no prior knowledge of IS or IT, so that new concepts and terms are defined as clearly as possible, with explanations in the text, and definitions at the margin. In this fast-moving area, the book covers both the crucial underpinnings of the subject as well as the most recent business and technology applications. It is written for students on any IS, BIS or MIS course from undergraduate to postgraduate and MBA level within a Business or Computer Science Department.
Resumo:
The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87-92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management. © 2013 Elsevier Ltd.
Resumo:
The increased data complexity and task interdependency associated with servitization represent significant barriers to its adoption. The outline of a business game is presented which demonstrates the increasing complexity of the management problem when moving through Base, Intermediate and Advanced levels of servitization. Linked data is proposed as an agile set of technologies, based on well established standards, for data exchange both in the game and more generally in supply chains.
Resumo:
The changing business environment has sharpened the focus on the need for robust approaches to supply chain management (SCM) and the improvement of supply chain capability and performance. This is particularly the case in Ireland, which has the natural disadvantage of a location peripheral to significant markets and sources of raw materials which results in relatively high transport and distribution costs. Therefore, in order to gain insights into current levels of diffusion of SCM, a survey was conducted among 776 firms in the Republic of Ireland. The empirical results suggest that there is a need for more widespread adoption of SCM among Irish firms. This is particularly the case in relation to the four main elements of SCM excellence reported in this paper. The design of supply chain solutions is a highly skilled, knowledge-intensive and complex activity, reflected in a shift from 'box moving' to the design and implementation of customised supply chain solutions. Education and training needs to be addressed by stimulating the development of industry-relevant logistics and SCM resources and skills.
Resumo:
The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87-92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management. © 2013 Elsevier Ltd.
Resumo:
This chapter explains a functional integral approach about impurity in the Tomonaga–Luttinger model. The Tomonaga–Luttinger model of one-dimensional (1D) strongly correlates electrons gives a striking example of non-Fermi-liquid behavior. For simplicity, the chapter considers only a single-mode Tomonaga–Luttinger model, with one species of right- and left-moving electrons, thus, omitting spin indices and considering eventually the simplest linearized model of a single-valley parabolic electron band. The standard operator bosonization is one of the most elegant methods developed in theoretical physics. The main advantage of the bosonization, either in standard or functional form, is that including the quadric electron–electron interaction does not substantially change the free action. The chapter demonstrates the way to develop the formalism of bosonization based on the functional integral representation of observable quantities within the Keldysh formalism.
Resumo:
The world's population is ageing. Older people are healthier and more active than previous generations. Living in a hypermobile world, people want to stay connected to dispersed communities as they age. Staying connected to communities and social networks enables older people to contribute and connect with society and is associated with positive mental and physical health, facilitating independence and physical activity while reducing social isolation. Changes in physiology and cognition associated with later life mean longer journeys may have to be curtailed. A shift in focus is needed to fully explore older people, transport and health; a need to be multidisciplinary in approach and to embrace social sciences and arts and humanities. A need to embrace different types of mobilities is needed for a full understanding of ageing, transport and health, moving from literal or corporeal through virtual and potential to imaginative mobility, taking into account aspirations and emotions. Mobility in later life is more than a means of getting to destinations and includes more affective or emotive associations. Cycling and walking are facilitated not just by improving safety but through social and cultural norms. Car driving can be continued safely in later life if people make appropriate and informed decisions about when and how to stop driving; stringent testing of driver ability and skill has as yet had little effect on safety. Bus use facilitates physical activity and keeps people connected but there are concerns for the future viability of buses. The future of transport may be more community led and involve more sharing of transport modes.
Resumo:
2010 Mathematics Subject Classification: 53A07, 53A35, 53A10.
Resumo:
The purpose of this study was to document and critically analyze the lived experience of selected nursing staff developers in the process of moving toward a new model for hospital nursing education. Eleven respondents were drawn from a nation-wide population of about two hundred individuals involved in nursing staff development. These subjects were responsible for the implementation of the Performance Based Development System (PBDS) in their institutions.^ A purposive, criterion-based sampling technique was used with respondents being selected according to size of hospital, primary responsibility for orchestration of the change, influence over budgetary factors and managerial responsibility for PBDS. Data were gathered by the researcher through both in-person and telephone interviews. A semi-structured interview guide, designed by the researcher was used, and respondents were encouraged to amplify on their recollections as desired. Audiotapes were transcribed and resulting computer files were analyzed using the program "Martin". Answers to interview questions were compiled and reported across cases. The data was then reviewed a second time and interpreted for emerging themes and patterns.^ Two types of verification were used in the study. Internal verification was done through interview transcript review and feedback by respondents. External verification was done through review and feedback on data analysis by readers who were experienced in management of staff development departments.^ All respondents were female, so Gilligan's concept of the "ethic of care" was examined as a decision making strategy. Three levels of caring which influenced decision making were found. They were caring: (a) for the organization, (b) for the employee, and (c) for the patient. The four existentials of the lived experience, relationality, corporeality, temporality and spatiality were also examined to reveal the everydayness of making change. ^
Resumo:
This phenomenological study explores how graduate students in an English department perceive their new roles as writing teachers. The findings show that even though the participants went through the same professional development program, they constructed different teacher identities based on their other identities and their experiences as students and writers.
Resumo:
ackground Following incomplete spinal cord injury (iSCI), descending drive is impaired, possibly leading to a decrease in the complexity of gait. To test the hypothesis that iSCI impairs gait coordination and decreases locomotor complexity, we collected 3D joint angle kinematics and muscle parameters of rats with a sham or an incomplete spinal cord injury. Methods 12 adult, female, Long-Evans rats, 6 sham and 6 mild-moderate T8 iSCI, were tested 4 weeks following injury. The Basso Beattie Bresnahan locomotor score was used to verify injury severity. Animals had reflective markers placed on the bony prominences of their limb joints and were filmed in 3D while walking on a treadmill. Joint angles and segment motion were analyzed quantitatively, and complexity of joint angle trajectory and overall gait were calculated using permutation entropy and principal component analysis, respectively. Following treadmill testing, the animals were euthanized and hindlimb muscles removed. Excised muscles were tested for mass, density, fiber length, pennation angle, and relaxed sarcomere length. Results Muscle parameters were similar between groups with no evidence of muscle atrophy. The animals showed overextension of the ankle, which was compensated for by a decreased range of motion at the knee. Left-right coordination was altered, leading to left and right knee movements that are entirely out of phase, with one joint moving while the other is stationary. Movement patterns remained symmetric. Permutation entropy measures indicated changes in complexity on a joint specific basis, with the largest changes at the ankle. No significant difference was seen using principal component analysis. Rats were able to achieve stable weight bearing locomotion at reasonable speeds on the treadmill despite these deficiencies. Conclusions Decrease in supraspinal control following iSCI causes a loss of complexity of ankle kinematics. This loss can be entirely due to loss of supraspinal control in the absence of muscle atrophy and may be quantified using permutation entropy. Joint-specific differences in kinematic complexity may be attributed to different sources of motor control. This work indicates the importance of the ankle for rehabilitation interventions following spinal cord injury.