Occupational injuries among day laborers in Houston

Research has indicated that day laborers engage in higher risk occupations and suffer a high number of occupationally related fatal and non-fatal injuries. Although there have been some studies focusing on immigrant workers and their occupational injuries, none to our knowledge has studied Houston’s day laborers. An exploratory study of Houston’s day laborer population was conducted in 2008 by Dr. Fernández-Esquer from the University of Texas. ^ The aims of the current study are to analyze secondary data from this parent study and describe the prevalence of the self reported occupational injuries among Houston immigrant day laborers seeking work during the months of October through December 2008. The study also aims to determine if the reported injuries varied by age group, education level, length of time living in the U.S. and length of time working as day laborers and describe if injuries were more common by the number of different job types or job conditions reported or the use of personal protective equipment used (PPE). ^ This study analyzed 325 questionnaires that included job-related information from the parent study. One hundred and nine workers (35 %) reported an occupational injury or illness in the year before the interview. The most frequent injuries or illnesses reported were falls (26.7 %), cuts and lacerations (23.3 %) and being struck by an object (18.3 %). Over half of the workers (57 %) reported working 4 to 6 different jobs in the year before the interview, followed by 22.5 % reporting 1 to 3 different jobs. A combined 79 % of day laborers in Houston reported exposure to 7 or more of the job conditions listed and 69 % of those workers also reported an injury or illness. PPE use varied from 44 % of workers reporting using 4 to 6 PPE items to 6.8 % reporting not using any type of PPE. Thirty two percent of workers reporting not using any PPE also reported an injury or illness. ^ Injuries were found not to have varied significantly by age group, time living in the US, time working as a day laborer, numbers of different job types and the number of PPE used. Injuries did vary significantly by education level of the participants and the number of different job conditions reported (education, X2 (4, N = 315) = 12.651, p =0.013; and job conditions, X2 (3, N = 319) = 14.698, p = 0.002). ^ Although this first study of Houston’s day laborers was successful at engaging the population and getting background information regarding the occupational health of these workers, more studies are needed to further characterize the day laborers occupational experiences and injuries along with determining what specific job types and job conditions were present when injuries occurred and what kind of PPE was being used at the time. It is also clear that these workers need better safety training programs regarding working in potentially dangerous jobs and job conditions. They would also benefit from programs that would help empower them to negotiate for safer conditions.^

Use of empowerment evaluation to determine a sustainability plan for a community-based preconception care program

Women With IMPACT (WWI) is a community-based preconception care educational intervention. WWI is being implemented by the Impacting Maternal and Prenatal Care Together (IMPACT) Collaborative and targets zip codes in Harris County, Texas at high risk for infant mortality, low birthweight, and preterm birth. WWI started March 2012 and continues through August 2013. Three workshop series are planned. This study was conducted with participants and facilitators from the first workshop series. This study aimed to 1) evaluate the WWI program using empowerment evaluation, 2) engage all WWI stakeholders in an empowerment evaluation so the method could be adopted as a participatory evaluation process for future IMPACT activities, and 3) develop recommendations for sustainability of the WWI intervention, based on empowerment evaluation findings and results from the pre/post program evaluation completed by WWI participants. Study participants included WWI participants and facilitators and IMPACT Collaborative Steering Committee members. WWI participants were female, 18-35 year-old, non-pregnant residents of zip codes at high risk of adverse birth outcomes. All other study participants were 18 years or older. A two-phased empowerment evaluation (EE) was utilized in this study. Sessions 1-4 were conducted independently of one another – 3 with participants at different sites and one with the facilitators. The fifth session included WWI participant and facilitator representatives, and IMPACT Steering Committee members. Session 5 built upon the work of the other sessions. Observation notes were recorded during each session. Thematic content analysis was conducted on all EE tables and observation notes. Mission statements drafted by each group focused on improvement of physical and mental health through behavior change and empowerment of all participants. The top 5 overall program components were: physical activity, nutrition, self-worth, in-class communication, and stress. Goals for program improvement were set by EE participants for each of these components. Through thematic content analysis of the tables and observation notes, social support emerged as an important theme of the program among all participant groups. Change to a healthy lifestyle emerged as an important theme in terms of program improvement. Two-phased EE provided an opportunity for all program stakeholders to provide feedback regarding important program components and provide suggestions for program improvement. EE, thematic content analysis, pre/post evaluation results, and inherent program knowledge were triangulated to make recommendations to sustain the program once the initial funding ends. ^

Parallel Algorithms for FE-BE Coupling

When non linear physical systems of infinite extent are modelled, such as tunnels and perforations, it is necessary to simulate suitably the solution in the infinite as well as the non linearity. The finite element method (FEM) is a well known procedure for simulating the non linear behavior. However, the treatment of the infinite field with domain truncations is often questionable. On the other hand, the boundary element method (BEM) is suitable to simulate the infinite behavior without truncations. Because of this, by the combination of both methods, suitable use of the advantages of each one may be obtained. Several possibilities of FEM-BEM coupling and their performance in some practical cases are discussed in this paper. Parallelizable coupling algorithms based on domain decomposition are developed and compared with the most traditional coupling methods.

Modelización y simulación numérica de sistemas geotérmicos planos

En el presente proyecto se estudiará la conveniencia de utilizar simulación numérica para evaluar, diseñar y mejorar el diseño de instalaciones geotérmicas planas. Para ello, se modelizará el conjunto de terreno y sistema geotérmico mediante el acoplamiento de un modelo tridimensional (terreno) y un modelo unidimensional, formado por la red de tubería geotérmica, que estará dispuesta en un plano cuya orientación dependerá de las aplicaciones. Para la simulación numérica se utilizará un software de análisis y resolución por elementos finitos tipo comercial. Finalmente, se definirán unos parámetros geométricos de diseño y, teniendo en cuenta las propiedades térmicas de cada material, se realizarán estudios paramétricos para determinar la influencia de cada grupo de parámetros. Ello requerirá la realización de cientos de simulaciones numéricas que permitirán optimizar el rendimiento de sistemas geotérmicos planos tanto horizontales (soleras), como verticales (muros pantalla). ABSTRACT In this project it is going to be studied the convenience of numerical simulation as to evaluate, design and improve the design of geothermal planar installations. With this purpose, the terrain and the geothermal system will be modeled by coupling a three-dimensional model (terrain) and a one-dimensional model formed by the geothermal piping network disposed in a plane with an orientation which will depend on the applications. For the numerical simulation commercial software of analyzing and resolving by finite elements will be used. Finally, geometric design parameters will be defined, and taking into account the thermal properties of each material, parametric studies will be performed to determine the influence of each group of parameters. This will require the completion of hundreds of numerical simulations which will enhance the performance of both horizontal (slabs) and vertical (diaphragm walls) geothermal systems.

Modelización de las propiedades radiativas e interacción de láseres ultraintensos con la materia

Desde el año 2004 el código ARWEN ha sido utilizado con éxito para simular y diseñar experimentos relacionados con blancos para fusión por confinamiento inercial [146], astrofísica de laboratorio [145], plasmas como amplificadores de láseres de rayos X [107] o plasmas creados por láser para la medición de espectros de transmisión. Para la realización de estas simulaciones es necesario, además de métodos de alto orden precisos y que presenten buenas propiedades conservativas, conocer ciertas propiedades de los plasmas. En el caso de la fluidodinámica y la conducción electrónica necesitaremos conocer la ecuación de estado [94, 49, 36], y para el transporte de la radiación será preciso disponer de los datos de absorción y emisión [104, 95, 40]. Hasta el año 2009 ARWEN dependía de códigos externos para la generación de estas tablas de opacidad, careciendo de control sobre los métodos empleados para su generación. Además estos códigos asumían equilibrio local termodinámico (LTE), limitando su validez a rangos de alta densidad y baja temperatura. En el marco de esta tesis se ha desarrollado el código BIGBART para la generación de tablas detalladas de opacidad y emisividad para su uso en el módulo de transporte de radiación. De esta forma el grupo dispondrá de su propia herramienta de generación de propiedades radiativas. El código desarrollado es capaz de tratar plasmas en estado fuera de equilibrio (non-LTE) mediante el modelo colisional-radiativo, extendiendo así el rango de validez de las tablas generadas. El trabajo desarrollado para implementar un código LTE/non-LTE estacionario es el siguiente Cálculo de estructura y datos atómicos. Se ha acoplado en código FAC a BIGBART, incorporando la capacidad para generar potenciales atómicos para una configuración y el cálculo de funciones de onda de electrones en orbitales ligados y libres. Aproximaciones y métodos para la obtención de tasas y secciones eficaces de procesos. Se han incluido y programado los modelos implementados en FAC para el cálculo de secciones eficaces de fotoionización, y tasas de decaimiento de emisión espontánea y autoionización. Además se ha incluido el modelo Plane-Wave Born (PWBA) para el cálculo de las secciones eficaces de ionización y excitación colisional. Modelos para la obtención de la distribución de estados iónicos dentro del plasma. Se ha programado un solver LTE basado en la ecuación de Saha-Boltzmann con efectos de ionización por presión debida a los iones adyacentes. También se ha implementado un modelo non-LTE colisionalradiativo para la resolución del sistema de ecuaciones que nos permite obtener la densidad de estados iónicos fuera de equilibrio. Modelo non-LTE RADIOM. Se ha implementado el modelo RADIOM para aproximar efectos de no-equilibrio mediante cálculos LTE a una temperatura equivalente, menor o igual que la temperatura electrónica real. Cálculo de las propiedades espectrales de absorción y emisión. Se han implementado los modelos para el cálculo de los perfiles espectrales de absorción y emisión para procesos entre niveles ligados, ligado-libre y librelibre. Aprovechando el trabajo realizado en este sentido, durante el transcurso de esta tesis se amplió el código BIGBART para tratar problemas con dependencia temporal. La extensión para tratar este tipo de problemas se orientó a la simulación numérica de la interacción de láseres ultra intensos en el rango XUV/rayos X. Para ello, además de adaptar el modelo non-LTE colisionalradiativo se incluyeron procesos adicionales asociados a la interacción de la materia con fotones altamente energéticos. También se han incluido modelos para el cálculo de las propiedades ópticas, y por ende las propiedades dieléctricas de la materia irradiada, de gran interés en algunas aplicaciones novedosas de estos láseres intensos. Debido a la naturaleza fuertemente fuera de equilibrio en la interacción de fotones de alta energía con la materia, se incluyó el tratamiento de la distribución de electrones libres fuera de equilibrio en la aproximación de Fokker-Planck, tanto para condiciones degeneradas como no degeneradas. El trabajo desarrollado en el código non-LTE con dependencia temporal es el siguiente Procesos asociados a láseres intensos XUV/rayos X. Se ha implementado el cálculo de procesos radiativos estimulados de absorción y emisión por el láser. También se han incluido procesos asociados a la creación de vacantes en capas internas electrónicas (Shake), además de doble autoionización y doble fotoionización. Cálculo de propiedades ópticas y dieléctricas en blancos sólidos. Se ha implementado un modelo para la absorción por bremsstrahlung inverso en blancos en estado sólido. Con el coeficiente de extinción debido a procesos de fotoabsorción resonante, fotoionización y bremsstrahlung inverso se obtiene el ´ındice de refracción mediante la relación de Kronig-Kramers. Electrones fuera de equilibrio. Se ha tratado la evolución de la distribución de electrones, cuando no está justificado asumir que es Maxwelliana o de Fermi-Dirac, mediante la aproximación de Fokker-Planck para la colisión entre electrones libres. En la resolución de la ecuación de Fokker-Planck se han incluido los procesos inelásticos por colisiones con iones y términos fuente por interacción con el láser y otros procesos. ABSTRACT Since 2004 the ARWEN code has been successfully used to simulate and design targets for inertial confinement fusion experiments [146], laboratory astrophysics [145], plasmas as X-ray lasers amplifiers [107] or laser created plasmas for measuring transmission spectra. To perform these simulations it is necessary, in addition to high order precise methods with good conservative properties, to know certain properties of plasmas. For fluid dynamic and electronic conduction we need to know the equation of state [94, 49, 36], and for radiation transport it will be necessary to have the data of the absorption and emission [104, 95, 40]. Until 2009 ARWEN depended on external codes to generate these opacity tables, lacking of control over the methods used for their generation. Besides, these codes assumed local thermodynamic equilibrium (LTE), limiting their validity ranges to high densities and low temperatures. As part of this thesis it has been developed the BIGBART code for generating detailed opacity and emissivity tables for use in the radiation transport module. This group will have its own tool for the generation of radiative properties. The developed code is capable of treating plasmas out of equilibrium (non-LTE) by means of a collisional-radiative model, extending the range of validity of the generated tables. The work to implement an LTE/non-LTE steady-state code is as follows Calculation of structure and atomic data. the FAC code was coupled to BIGBART, incorporating the ability to generate atomic potentials for calculating configuration wave functions for bound and free electrons. Approaches and methods for obtaining cross sections and processes rates. We have included and reprogrammed in Fortran the models implemented in FAC for calculation of photoionization cross sections and decay rates of spontaneous emission and autoionization. We also included the Plane- Wave Born (PWBA) model to calculate the cross sections of ionization and collisional excitation. Models for the obtention of the distribution of ionic states within the plasma. We programmed a LTE solver based on the Saha-Boltzmann equation with pressure ionization effects due to adjacent ions. It has also been implemented a non-LTE collisional-radiative model for solving the system of equations that allows us to obtain the density of ionic states out of equilibrium. Non-LTE RADIOM model. We have implemented the non-LTE RADIOM model to approximate non-equilibrium effects with LTE data at an equivalent temperature, lower or equal to the actual electronic temperature. Calculation of the spectral absorption and emission properties. Models have been implemented for the calculation of the spectral profiles of absorption and emission processes between bound levels, free-bound and free-free. Taking advantage of the work done in this direction throughout the course of this thesis the code BIGBART was extended to treat time-dependent problems. The extension to treat such problems is oriented to the numerical simulation of the interaction of ultra intense lasers in the XUV/X-ray range. For this range, in addition to adapting the non-LTE collisional-radiative model, additional processes associated with the interaction of matter with high energy photons. We also included models for calculation of the optical properties, and therefore the dielectric properties of the irradiated material, of great interest in some novel applications of these intense lasers. Due to the strong non-equilibrium nature of the interaction of high energy photons with matter, we included the treatment of the distribution of free electrons out of equilibrium in the Fokker-Planck approximation for both degenerate and non-degenerate conditions. The work in the non-LTE time-dependent code is as follows Processes associated with intense XUV/X-ray lasers. We have implemented the calculation of stimulated radiative processes in absorption and emission. Also we included processes associated with the creation of electronic vacancies in inner shells (Shake), double autoionization and double photoionization. Calculation of optical and dielectric properties in solid targets. We have implemented a model for inverse bremsstrahlung absorption in solid targets. With the extinction coefficient from resonant photoabsorption, photoionization and inverse bremsstrahlung the refractive index is obtained by the Kramers-Kronig relation. Electrons out of equilibrium. We treat the evolution of the electron distribution, when it is not justified to assume a Maxwellian or Fermi-Dirac distribution, by the Fokker-Planck approximation for collisions between electrons. When solving the Fokker-Planck equation we included inelastic collision processes with ions and source terms by interaction with the laser and other processes.

The development of a wind tunnel DAQ system by using Labview tools

This paper presents the experimental three-year learning activity developed by a group of teachers in a wind tunnel facility. The authors, leading a team of students, carried out a project consisting of the design, assembly and testing of a wind tunnel. The project included all stages of the process from its initial specifications to its final quality flow assessments, going through the calculation of each element, and the building of the whole wind tunnel. The group of (final year) students was responsible for the whole wind tunnel project as a part of their bachelor degree project. The paper focuses on the development of wind tunnel data acquisition software. This automatic tool is essential to improve the automation of the data acquisition of the wind tunnel facility systems, in particular for a 6DOF multi-axis force/torque sensor. This work can be considered as a typical example of real engineering practice: a set of specifications that has to be modified due to the constraints imposed throughout the project, in order to obtain the final result

Automated end user-centred adaptation of web components through automated description logic-based reasoning

Context: This paper addresses one of the major end-user development (EUD) challenges, namely, how to pack today?s EUD support tools with composable elements. This would give end users better access to more components which they can use to build a solution tailored to their own needs. The success of later end-user software engineering (EUSE) activities largely depends on how many components each tool has and how adaptable components are to multiple problem domains. Objective: A system for automatically adapting heterogeneous components to a common development environment would offer a sizeable saving of time and resources within the EUD support tool construction process. This paper presents an automated adaptation system for transforming EUD components to a standard format. Method: This system is based on the use of description logic. Based on a generic UML2 data model, this description logic is able to check whether an end-user component can be transformed to this modeling language through subsumption or as an instance of the UML2 model. Besides it automatically finds a consistent, non-ambiguous and finite set of XSLT mappings to automatically prepare data in order to leverage the component as part of a tool that conforms to the target UML2 component model. Results: The proposed system has been successfully applied to components from four prominent EUD tools. These components were automatically converted to a standard format. In order to validate the proposed system, rich internet applications (RIA) used as an operational support system for operators at a large services company were developed using automatically adapted standard format components. These RIAs would be impossible to develop using each EUD tool separately. Conclusion: The positive results of applying our system for automatically adapting components from current tool catalogues are indicative of the system?s effectiveness. Use of this system could foster the growth of web EUD component catalogues, leveraging a vast ecosystem of user-centred SaaS to further current EUSE trends.

Complex mtDNA constitutes an approximate 620-kb insertion on Arabidopsis thaliana chromosome 2: Implication of potential sequencing errors caused by large-unit repeats

Previously conducted sequence analysis of Arabidopsis thaliana (ecotype Columbia-0) reported an insertion of 270-kb mtDNA into the pericentric region on the short arm of chromosome 2. DNA fiber-based fluorescence in situ hybridization analyses reveal that the mtDNA insert is 618 ± 42 kb, ≈2.3 times greater than that determined by contig assembly and sequencing analysis. Portions of the mitochondrial genome previously believed to be absent were identified within the insert. Sections of the mtDNA are repeated throughout the insert. The cytological data illustrate that DNA contig assembly by using bacterial artificial chromosomes tends to produce a minimal clone path by skipping over duplicated regions, thereby resulting in sequencing errors. We demonstrate that fiber-fluorescence in situ hybridization is a powerful technique to analyze large repetitive regions in the higher eukaryotic genomes and is a valuable complement to ongoing large genome sequencing projects.

Tecer amizade, habitar o deserto: uma etnografia do quilombo Família Magalhães (GO)

Esta tese é o resultado de uma etnografia sobre a comunidade negra rural Família Magalhães (Nova Roma-GO), originária do território Kalunga. Procurei discutir, tendo em vista o reconhecimento do grupo como quilombola perante o Estado, formas específicas pelas quais ele produz relações entre parentes e não parentes. No último caso, me refiro a agentes do governo federal e estadual, presidentes da república, deputados, procuradores, advogados, prefeitos, vereadores e, também, a conhecidos, vizinhos, compadres e correligionários. Nessa trama, tocar amizade e fazer política aparecem como modos privilegiados de tecer territórios, entendidos em seu caráter relacional, sempre passíveis de serem atravessados por relações de caráter agonístico. Assim, investiguei como são geridos, entre os membros de Família Magalhães, movimentos contínuos de produção de vínculos e segmentações, trazendo à tona agenciamentos específicos do grupo em suas experiências de alteridade.

Molecular Genetic Basis of Opposite Gene by Environment Interactions in Reading Disability and Attention Deficit/Hyperactivity Disorder

The goal of this study is to better understand the genetic basis of Reading Disability (RD) and Attention Deficit Hyperactivity Disorder (ADHD) by examining molecular G x E interactions with parental education for each disorder. Research indicates that despite sharing genetic risk factors, RD and ADHD are influenced by different types of G x E interactions with parental education - a diathesis stress interaction in the case of ADHD and a bioecological interaction in RD. In order to resolve this apparent paradox, we conducted a preliminary study using behavioral genetic methods to test for G x E interactions in RD and the inattentive subtype of ADHD (ADHD-I) in the same sample of monozygotic and dizygotic Colorado Learning Disabilities Research Center same-sex twin pairs (DeFries et al., 1997), and our findings were consistent with the literature. We posited a genetic hypothesis for this opposite pattern of interactions, which suggests that only genes specific to each disorder enter into these opposite interactions, not the shared genes underlying their comorbidity. This study sought to further investigate this paradox using molecular genetics methods. We examined multiple candidate genes identified for RD or related language phenotypes and those identified for ADHD for G x E interactions with parental education. The specific aims of this study were as follows: 1) partition known risk alleles for RD and/or related language phenotypes and ADHD-I into those which are pleiotropic and non-pleiotropic by testing each risk allele for association with both RD and ADHD-I, 2) explore the main effects of parental education on both RD and ADHD-I, 3) address G-E correlations, and 4) conduct exploratory G x E interaction analyses in order to test the genetic hypothesis. Analyses suggested a number of pleiotropic genes that influence both RD and ADHD; however, results did not remain after correcting for multiple comparisons. Although exploratory G x E interaction findings were not significant after multiple comparison correction, results suggested a G x E interaction in the bioecological direction with KIAA0319, parental education, and ADHD-I. Given the limited power in the current study, replication of these findings with larger samples is necessary.

Estudo do processo de formação do cavaco durante o torneamento e sua relação com a microestrutura utilizando o método dos elementos finitos.

O objetivo desse trabalho foi avaliar o processo de formação do cavaco durante o torneamento utilizando simulação numérica pelo método dos elementos finitos. Para realizar o estudo foram definidos dois tipos de aços inoxidáveis austeníticos, um com matriz metálica sem a presença significativa de inclusões, do tipo ABNT 304, e outro com a presença de inclusões não metálicas, do tipo ABNT 303. O estudo foi focado nos mecanismos de formação e ruptura do cavaco, na determinação das forças de usinagem, no campo de tensões, deformações, e temperaturas durante o processo, que foram relacionados com aspectos e características da microestrutura do material. Os resultados obtidos foram comparados com as forças de usinagem experimentais, com a espessura e morfologia do cavaco. O desenvolvimento do trabalho, de acordo com a metodologia adotada, foi realizado em diferentes etapas. Inicialmente foi elaborado e aplicado um modelo de simulação da usinagem considerando o material homogêneo. Em outra etapa, foi realizada a modelagem de uma microestrutura submetida a um estado de tensão e deformação semelhante ao encontrado na simulação da usinagem realizada com material homogêneo. Os resultados mostraram que as partículas das inclusões maiores, alongadas, e em maior quantidade aumentam a tensão e a deformação na microestrutura. As elevadas temperaturas obtidas na usinagem dos aços inoxidáveis austeníticos aumentam a ductilidade dos sulfetos, esses se deformam em compressão junto com a matriz, e têm um efeito limitado como agente de redução dos esforços de usinagem. Por outro lado, os sulfetos facilitam a etapa de ruptura do cavaco em tensões trativas, e tendem a se romper facilitando o processo de quebra.

A public key cryptosystem based on block upper triangular matrices

We propose a public key cryptosystem based on block upper triangular matrices. This system is a variant of the Discrete Logarithm Problem with elements in a finite group, capable of increasing the difficulty of the problem while maintaining the key size. We also propose a key exchange protocol that guarantees that both parties share a secret element of this group and a digital signature scheme that provides data authenticity and integrity.

Bioethical perspectives for ageing: the documents produced by the Ethics Councils

Aging attracted keen interest in research, health, education as well as cross-sectors approaches. We researched what has been produced by the National Bioethics/Ethics Councils in the form of opinions or other documents, relating to aging and elderly people. In the websi-tes of the 28 EU councils and 12 other countries, we identified 4 documents relating to aging and 8 opinions, which we analyse. The Councils have proposed to draw the attention and reflection of public opinion to the elderly condition; all agree that the age has its own traits and that matters revert to a “culture of old age”, respect and promotion of a positive aging. Enhance the diversity of modes of aging and the importance of preparing all, promoting literacy for aging, creating social and legal protective elements (Elderly Statute, Observatory of the Elderly Conditions). From the analysis, a set of principles and bioethical elements: [1] respect for human dignity, regardless of the stage of life; [2] recognition of the person’s situation uniqueness to aging; [3] freedom of one’s own decision, which is materialized in respect for autonomy; [4] recognition of the vulnerabilities of the elderly, [5] ethical commitment and social responsibility in monitoring the elderly, [6] non-discrimination by age and [7] the guidance to the conditions of the integral good and quality of life. Aging is an existential step for which we can prepare, on the assumption that human life in its longevity, interweaves those who are older and those younger, on the crucial issue of human existence.

Field-based models for low speed switched reluctance machine designs

Trabalho apresentado na Conferência CPE-POWERENG 2016, 29 junho a 01 de julho 2016, Bydgoszcz, Polónia

The individual within the group: Balancing the need to belong with the need to be different

Many theorists have wrestled with the notion of how people balance their need to be included in social groups with their need to be different and distinctive. This question is particularly salient to researchers from the social identify perspective, who have traditionally viewed individual differentiation within groups as being inimical to group identification. In this article we present a number of strategies that people can use to balance their need to belong and their need to be different, without violating social identity principles. First, drawing from optimal distinctiveness theory, we discuss 4 ways in which the need for belonging and the need to be different can be resolved by maximizing group distinctiveness. We then discuss 4 ways in which it is possible to achieve individual differentiation within a group at the same time demonstrating group identification. These strategies are discussed and integrated with reference to recent empirical research and to the social identity perspective.