Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Microscopic analysis of "prato", "mussarela" and "mineiro" cheese sold in street markets of the City of S. Paulo, Southeastern Brazil

INTRODUCTION: Cheese should be produced from ingredients of good quality and processed under hygienic conditions. Further, cheese should be transported, stored and sold in an appropriate manner in order to avoid, among other things, the incorporation of extraneous materials (filth) of biological origin or otherwise, in contravention of the relevant food legislation. The aim of the study was to evaluate the hygienic conditions of "prato", "mussarela", and "mineiro" cheeses sold at the street food markets in the city of S. Paulo, Brazil. MATERIALS AND METHOD: Forty-seven samples of each of the three types of cheese were collected during the period from March, 1993 to February, 1994. The Latin square was used as a statistical model for sampling and random selection of the street markets from which to collect the cheese samples. The samples were analysed for the presence of extraneous matters outside for which purpose the samples were washed and filtered and inside, for which the methodology of enzymathic digestion of the sample with pancreatine, followed by filtering,was used. RESULTS AND CONCLUSION: Of the 141 samples analysed, 75.9% exhibited at least one sort of extraneous matters. For the "prato" and "mussarela" cheeses, the high number of contaminated samples was due mainly to extraneous matters present inside the cheese, whereas in the "mineiro" cheese, besides the internal filth, 100% of the samples had external filth.

Surge damping analysis in pipe systems: modelling and experiments

The current study focuses on the analysis of pressure surge damping in single pipeline systems generated by a fast change of flow, conditions. A dimensionless form of pressurised transient flow equations was developed. presenting the main advantage of being independent of the system characteristics. In lack of flow velocity profiles. the unsteady friction in turbulent regimes is analysed based on two new empirical corrective-coefficients associated with local and convective acceleration terms. A new, surge damping approach is also presented taking into account the pressure peak time variation. The observed attenuation effect in the pressure wave for high deformable pipe materials can be described by a combination of the non-elastic behaviour of the pipe-wall with steady and unsteady friction effects. Several simulations and experimental tests have been carried out. in order to analyse the dynamic response of single pipelines with different characteristics, such as pipe materials. diameters. thickness. lengths and transient conditions.

How to teach mathematics with MOODLE

The aim of this article is to present a Project in the Oporto’s Institute of Accounting and Administration, which pretends to contribute for a change in the way of teaching and learning Mathematics. One of the main objectives of this project is to innovate the teaching and learning processes, exploring technologies as a pedagogical resource and to induce higher motivation to students, improve the rate of success and make available to students a set of materials adapted to their needs. This concern is justified due to the fact that students have a weak preparation, without consolidated basis. Since the year 2007/2008 the courses were adjusted to the Bologna process, which requires several changes in teacher’s and student’s roles, methodologies and assessment. The number of weekly classes has been reduced, so it was necessary to develop new strategies and methodologies to support the student. With the implementation of the Bologna Process in the Accounting degree, we felt a great need to provide other types of activities to students. To complement our theoretical and practical classes we have developed a project called MatActiva based on the Moodle platform offered by PAOL - Projecto de Apoio On-Line (Online Support Project). Moodle allows us to use the language TEX to create materials that use mathematical symbols. Using this functionality, we created a set of easy to use interactive resources. In MatActiva project, the students have access to a variety of different materials. We have followed a strategy that makes the project compatible with the theoretical and practical subjects/classes, complementing them. To do so, we created some resources, for instance multiple-choice tests, which are the most accessed by the students. These tests can be realized and corrected on-line and for each wrong answer there is a feedback with the resolution. We can find other types of resources: diagnostic tests, theoretical notes. There are not only the pre-requirements for subjects mathematics, but also materials to help students follow up the programs. We also developed several lessons. This activity consists of a number of pages, where each page has contents and leads to other pages, based on the student's progress. The teacher creates the choices and determines the next page that the student will see, based upon their knowledge. There is also an area of doubts, where the students can place all the mathematical doubts they have, and a teacher gives the answers or clues to help them in their work. MatActiva also offers an area where we can find some humour, curiosities, contests and games including mathematical contents to test the math skills, as well as links to pages about mathematical contents that could be useful for the study. Since ISCAP receives ERASMUS students and some of them attend mathematics, we developed some materials in English, so they can also use MatActiva. The main objectives of our project are not only to bring success in the subjects of mathematics, but also to motivate the students, encourage them to overcome theirs difficulties through an auto-study giving them more confidence and improve their relationship with the mathematics as well as the communication between students and teachers and among students.

The active mathematics project at ISCAP

This paper summarizes a project that is contributing to a change in the way of teaching and learning Mathematics. Mathematics is a subject of the Accounting and Administration course. In this subject we teach: Functions and Algebra. The aim is that the students understand the basic concepts and is able to apply them in other issues, when possible, establishing a bridge between the issues that they have studied and their application in Accounting. As from this year, the Accounting course falls under in Bologna Process. The teacher and the student roles have changed. The time for theoretical and practical classes has been reduced, so it was necessary to modify the way of teaching and learning. In the theoretical classes we use systems of multimedia projection to present the concepts, and in the practical classes we solve exercises. To supplement our theoretical and practical classes we have developed an active mathematics project called MatActiva based on the Moodle platform offered by PAOL - Projecto de Apoio Online (Online Support Project). In the last versions of Moodle, it is possible use the TeX language to create math questions. Using this tool we created a set of interactive materials. With the creation of this new project we wanted to take advantage already obtained results with the previous experiences, giving to the students opportunities to complement their study in Mathematics. One of the great objectives is to motivate students, encourage them to overcome theirs difficulties through an auto-study, giving them more confidence and the opportunity to seeing others perspectives of the mathematics subjects. In the MatActiva project the students have a big collection of information about the way of the subject works, which includes the objectives, the program, recommended bibliography, evaluation method and summaries. It works as material support for the practical and theoretical classes, the slides of the theoretical classes are available, the sheets with exercises for the students to do in the classroom and complementary exercises, as well as the exams of previous years. Students can also do diagnostic tests and evaluation tests online. Our approach is a reflexive one, based on the professional experience of the teachers that explore and incorporate new tools of Moodle with their students and coordinate the project MatActiva.

Contributos de um ambiente de geometria dinâmica (geogebra) e do geoplano na compreensão das propriedades e relações entre quadriláteros: um estudo com alunos do 4.º ano

O estudo insere-se no âmbito da educação matemática, mais especificamente na área da geometria. Com esta investigação pretende-se compreender qual o contributo do Ambiente de Geometria Dinâmica (AGD), GeoGebra, e do material manipulável (geoplano) na identificação das propriedades e relações entre quadriláteros: trapézio, paralelogramo, retângulo, losango e quadrado. De acordo com o objetivo do estudo formularam-se três questões: Qual o papel das representações na identificação das propriedades dos quadriláteros? Que influência tem a visualização na identificação das propriedades dos quadriláteros? Quais os contributos da utilização do AGD, GeoGebra, e do material manipulável (geoplano) na compreensão das propriedades e relações entre os quadriláteros? Atendendo à problemática em estudo, optou-se por uma metodologia de investigação predominantemente qualitativa, baseada em três estudos de caso. A recolha de dados empíricos foi realizada numa turma de 4.º ano do 1.º ciclo do ensino básico onde se implementou uma experiência de ensino, envolvendo todos os alunos e recorrendo ao geoplano e ao GeoGebra. Essa recolha incidiu na observação participante, em sala de aula, no registo de notas da investigadora, nos documentos produzidos pelos alunos e nos registos áudio e vídeo das discussões nos grupos e no coletivo da turma. Em termos de resultados, salienta-se que a utilização de representações evidenciou a compreensão que os alunos têm dos conceitos, facilitou a identificação das propriedades dos quadriláteros e a compreensão das relações entre eles. Os alunos identificaram as propriedades com base nas representações, no entanto focaram-se em casos particulares, de acordo com a imagem mental que têm da figura, especificamente o protótipo, indiciando a influência da visualização. Dos resultados sobressai também a dificuldade que os alunos sentiram em considerar uma figura como representante de uma classe e em distinguir atributos essenciais e não essenciais. Da análise dos dados ressalta também que tanto o geoplano como o GeoGebra foram uma mais-valia na concretização da experiência de ensino deste estudo. Os dois possuem vantagens e limitações e podem ser usados de maneira que um complemente o outro, podendo dessa forma contribuir, favoravelmente, para a aprendizagem da geometria. - ABSTRACT The study falls within the scope of mathematics education, specifically in the area of geometry. This research aims to understand the contribution of the Dynamic Geometry Environment (GeoGebra) and manipulative material (Geoboard) in the identification of properties and relations of quadrilaterals: trapezium, parallelogram, rectangle, diamond and square. According to the purpose of the study three questions were formulated: What is the role of the representations in the identification of the properties of quadrilaterals? What is the influence of visualization on the identification of the properties of quadrilaterals? What are the contributions on the use of Dynamic Geometry Environment (GeoGebra) and manipulative material (Geoboard) to understand the properties and relationships among quadrilaterals? Given the problem under study, it was chosen a predominantly qualitative research methodology based on three case studies. The empirical data collection was carried out on a fourth primary grade class, where it was implemented a teaching experience, involving all students and the use of Geoboard and GeoGebra. This collection was focused on participant observation in the classroom, in the record of the researcher’s notes, the documents produced by the students and the audio and video recordings of group discussions and collective class. In terms of results, it is noted that the use of representations showed the students understanding of the concepts and that it has facilitated the identification of the properties of quadrilaterals and understanding of the relationships between them. The students identified properties based on representations, however they focused in particular cases, according to the mental image that they have of the figure, specifically the prototype, indicating the influence of visualization. Results also highlights the difficulty that students felt in considering a figure as a representation of a group and distinguishing essential and nonessential attributes. Data analysis also highlights that both Geoboard and GeoGebra have been an asset in the delivery of teaching experience in this study. Both have advantages and limitations and they may be used to complement each other and contribute favorably to the learning of geometry.

Entropy analysis of DNA code dynamics in human chromosomes

Deoxyribonucleic acid, or DNA, is the most fundamental aspect of life but present day scientific knowledge has merely scratched the surface of the problem posed by its decoding. While experimental methods provide insightful clues, the adoption of analysis tools supported by the formalism of mathematics will lead to a systematic and solid build-up of knowledge. This paper studies human DNA from the perspective of system dynamics. By associating entropy and the Fourier transform, several global properties of the code are revealed. The fractional order characteristics emerge as a natural consequence of the information content. These properties constitute a small piece of scientific knowledge that will support further efforts towards the final aim of establishing a comprehensive theory of the phenomena involved in life.

Materiais estruturados: qual o seu papel na aprendizágem dos primeiros números?

Dissertação apresentada para obtenção do grau de Mestre em Educação Matemática na Educação Pré-Escolar e no 1.º e 2.º Ciclos do Ensino Básico

Analysis of functionally graded sandwich plate structures with piezoelectric skins, using B-spline finite strip method

Functionally graded materials are composite materials wherein the composition of the constituent phases can vary in a smooth continuous way with a gradation which is function of its spatial coordinates. This characteristic proves to be an important issue as it can minimize abrupt variations of the material properties which are usually responsible for localized high values of stresses, and simultaneously providing an effective thermal barrier in specific applications. In the present work, it is studied the static and free vibration behaviour of functionally graded sandwich plate type structures, using B-spline finite strip element models based on different shear deformation theories. The effective properties of functionally graded materials are estimated according to Mori-Tanaka homogenization scheme. These sandwich structures can also consider the existence of outer skins of piezoelectric materials, thus achieving them adaptive characteristics. The performance of the models, are illustrated through a set of test cases. (C) 2012 Elsevier Ltd. All rights reserved.

Copper(II) aza-bis(oxazoline) complex immobilized onto ITQ-2 and MCM-22 based materials as heterogeneous catalysts for the cyclopropanation of styrene

A copper(II) chiral aza-bis(oxazoline) homogeneous catalyst (CuazaBox) was anchored onto the external surface of MCM-22 and ITQ-2 structures, as well as encapsulated into hierarchical MCM-22. The transition metal complex loading onto the porous solids was determined by ICP-AES and the materials were also characterized by elemental analysis (C, N, H, S), FTIR, XPS, TG and low temperature N-2 adsorption isotherms. The materials were tested as heterogeneous catalysts in the benchmark reaction of cyclopropanation of styrene to check the effect of the immobilization procedure on the catalytic parameters, as well as on their reutilization in several catalytic cycles. Catalyst CuazaBox anchored onto the external surface of MCM-22 and ITQ-2 materials were more active and enantioselective in the cyclopropanation of styrene than the corresponding homogeneous phase reaction run under similar experimental conditions. This is due to the propylation of the acidic aza-Box nitrogen. HMCM-22 was nevertheless the best heterogeneous catalyst. Encapsulation of CuazaBox on post-synthesis modified MCM-22 materials led to low activities and enantioselectivities. But reversal on the stereochemical course of the reaction was observed, probably due to confinement effect. (C) 2013 Elsevier Inc. All rights reserved.

Analysis and simulation of a-Si Ha-SiC HPINIP structures for color image detection

It is presented in this paper a study on the photo-electronic properties of multi layer a-Si: H/a-SiC: H p-i-n-i-p structures. This study is aimed to give an insight into the internal electrical characteristics of such a structure in thermal equilibrium, under applied Was and under different illumination condition. Taking advantage of this insight it is possible to establish a relation among-the electrical behavior of the structure the structure geometry (i.e. thickness of the light absorbing intrinsic layers and of the internal n-layer) and the composition of the layers (i.e. optical bandgap controlled through percentage of carbon dilution in the a-Si1-xCx: H layers). Showing an optical gain for low incident light power controllable by means of externally applied bias or structure composition, these structures are quite attractive for photo-sensing device applications, like color sensors and large area color image detector. An analysis based on numerical ASCA simulations is presented for describing the behavior of different configurations of the device and compared with experimental measurements (spectral response and current-voltage characteristic). (c) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modelling and aerodynamic simulation of a vehicle and failure analysis of a laminated front fender

Master Thesis in Mechanical Engineering field of Maintenance and Production

Dependent component analysis: a hyperspectral unmixing algorithm

Linear unmixing decomposes a hyperspectral image into a collection of reflectance spectra of the materials present in the scene, called endmember signatures, and the corresponding abundance fractions at each pixel in a spatial area of interest. This paper introduces a new unmixing method, called Dependent Component Analysis (DECA), which overcomes the limitations of unmixing methods based on Independent Component Analysis (ICA) and on geometrical properties of hyperspectral data. DECA models the abundance fractions as mixtures of Dirichlet densities, thus enforcing the constraints on abundance fractions imposed by the acquisition process, namely non-negativity and constant sum. The mixing matrix is inferred by a generalized expectation-maximization (GEM) type algorithm. The performance of the method is illustrated using simulated and real data.

The influence of experience and training in a group of novice observers: a jackknife alternative free-response receiver operating characteristic analysis

Purpose - The study evaluates the pre- and post-training lesion localisation ability of a group of novice observers. Parallels are drawn with the performance of inexperienced radiographers taking part in preliminary clinical evaluation (PCE) and ‘red-dot’ systems, operating within radiography practice. Materials and methods - Thirty-four novice observers searched 92 images for simulated lesions. Pre-training and post-training evaluations were completed following the free-response the receiver operating characteristic (FROC) method. Training consisted of observer performance methodology, the characteristics of the simulated lesions and information on lesion frequency. Jackknife alternative FROC (JAFROC) and highest rating inferred ROC analyses were performed to evaluate performance difference on lesion-based and case-based decisions. The significance level of the test was set at 0.05 to control the probability of Type I error. Results - JAFROC analysis (F(3,33) = 26.34, p < 0.0001) and highest-rating inferred ROC analysis (F(3,33) = 10.65, p = 0.0026) revealed a statistically significant difference in lesion detection performance. The JAFROC figure-of-merit was 0.563 (95% CI 0.512,0.614) pre-training and 0.677 (95% CI 0.639,0.715) post-training. Highest rating inferred ROC figure-of-merit was 0.728 (95% CI 0.701,0.755) pre-training and 0.772 (95% CI 0.750,0.793) post-training. Conclusions - This study has demonstrated that novice observer performance can improve significantly. This study design may have relevance in the assessment of inexperienced radiographers taking part in PCE or commenting scheme for trauma.