Subject Teacher Training and Teaching in English

The purpose of this Master s thesis is on one hand to find out how CLIL (Content and Language Integrated Learning) teachers and English teachers perceive English and its use in teaching, and on the other hand, what they consider important in subject teacher education in English that is being planned and piloted in STEP Project at the University of Helsinki Department of Teacher Education. One research question is also what kind of language requirements teachers think CLIL teachers should have. The research results are viewed in light of previous research and literature on CLIL education. Six teachers participate in this study. Two of them are English teachers in the comprehensive school, two are class teachers in bilingual elementary education, and two are subject teachers in bilingual education, one of whom teaches in a lower secondary school and the other in an upper secondary school. One English teacher and one bilingual class teacher have graduated from a pilot class teacher program in English that started at the University of Helsinki in the middle of the 1990 s. The bilingual subject teachers are not trained in English but they have learned English elsewhere, which is a particular focus of interest in this study because it is expected that a great number of CLIL teachers in Finland do not have actual studies in English philology. The research method is interview and this is a qualitative case study. The interviews are recorded and transcribed for the ease of analysis. The English teachers do not always use English in their lessons and they would not feel confident in teaching another subject completely in English. All of the CLIL teachers trust their English skills in teaching, but the bilingual class teachers also use Finnish during lessons either because some teaching material is in Finnish, or they feel that rules and instructions are understood better in mother tongue or students English skills are not strong enough. One of the bilingual subject teachers is the only one who consciously uses only English in teaching and in discussions with students. Although teachers good English skills are generally considered important, only the teachers who have graduated from the class teacher education in English consider it important that CLIL teachers would have studies in English philology. Regarding the subject teacher education program in English, the respondents hope that its teachers will have strong enough English skills and that it will deliver what it promises. Having student teachers of different subjects studying together is considered beneficial. The results of the study show that acquiring teaching material in English continues to be the teachers own responsibility and a huge burden for the teachers, and there has, in fact, not been much progress in the matter since the beginning of CLIL education. The bilingual subject teachers think, however, that using one s own material can give new inspiration to teaching and enable the use of various pedagogical methods. Although it is questionable if the language competence requirements set for CLIL teachers by the Finnish Ministry of Education are not adhered to, it becomes apparent in the study that studies in English philology do not necessarily guarantee strong enough language skills for CLIL teaching, but teachers own personality and self-confidence have significance. Keywords: CLIL, bilingual education, English, subject teacher training, subject teacher education in English, STEP

Sulfate Chemistry for High-Voltage Insertion Materials: Synthetic, Structural and Electrochemical Insights

Rechargeable batteries based on Li and Na ions have been growing leaps and bounds since their inception in the 1970s. They enjoy significant attention from both the fundamental science point of view and practical applications ranging from portable electronics to hybrid vehicles and grid storage. The steady demand for building better batteries calls for discovery, optimisation and implementation of novel positive insertion (cathode) materials. In this quest, chemists have tried to unravel many future cathode materials by taking into consideration their eco-friendly synthesis, material/process economy, high energy density, safety, easy handling and sustainability. Interestingly, sulfate-based cathodes offer a good combination of sustainable syntheses and high energy density owing to their high-voltage operation, stemming from electronegative SO42- units. This review delivers a sneak peak at the recent advances in the discovery and development of sulfate-containing cathode materials by focusing on their synthesis, crystal structure and electrochemical performance. Several family of cathodes are independently discussed. They are 1) fluorosulfates AMSO(4)F], 2) bihydrated fluorosulfates AMSO(4)F2H(2)O], 3) hydroxysulfate AMSO(4)OH], 4) bisulfates A(2)M(SO4)(2)], 5) hydrated bisulfates A(2)M(SO4)(2)nH(2)O], 6) oxysulfates Fe-2(SO4)(2)O] and 7) polysulfates A(2)M(2)(SO4)(3)]. A comparative study of these sulfate-based cathodes has been provided to offer an outlook on the future development of high-voltage polyanionic cathode materials for next-generation batteries.

Dispersion of gamma-Alumina Nano-Sized Spherical Particles in a Calamitic Liquid Crystal. Study and Optimization of the Confinement Effects

We report an experimental study on confined systems formed by butyloxybenzylidene octylaniline liquid crystal (4O.8) + gamma-alumina nanoparticles. The effects of the confinement in the thermal and dielectric properties of the liquid crystal under different densities of nanoparticles is analyzed by means of high resolution Modulated Differential Scanning Calorimetry (MDSC) and broadband dielectric spectroscopy. First, a drastic depression of the N-I and SmA-N transition temperatures is observed with confinement, the more concentration of nanoparticles the deeper this depression is, driving the nematic range closer to the room temperature. An interesting experimental law is found for both transition temperatures. Second, the change in shape of the heat capacity peaks is quantified by means of the full width half maximum (FWHM). Third, the confinement does not noticeably affect the molecular dynamics. Finally, the combination of nanoparticles and the external applied electric field tends to favor the alignment of the molecules in metallic cells. All these results indicate that the confinement of liquid crystals by means of gamma-alumina nanoparticles could be optimum for liquid crystal-based electrooptic devices.

RBS/channeling study and photoluminscence properties of Er-implanted GaN

The Raman back scattering/channeling technique was used to analyze the damage recovery at different annealing temperatures and to determine the lattice location of the Er-implanted GaN samples. A better damage recovery was observed with increasing annealing temperature below 1000degreesC, but a complete recovery of the implantation damage cannot be achieved. For a sample annealed for at 900degreesC 30 min the Er and Ga angular scans across the <0001> axis was measured indicating that about 76% of Er ions occupies substitutional sites. Moreover, the photoluminscence (PL) properties of Er-implanted GaN thin films have been also studied. The experimental results indicate that those samples annealed at a higher temperature below 1000degreesC had a stronger 1539nm PL intensity. The thermal quenching of PL intensity for samples annealed at 900degreesC measured at temperatures from 15K to 300K is 30%.

Optical micro- and nanofibres: Higher mode generation and particle manipulation studies

This thesis is centred on two experimental fields of optical micro- and nanofibre research; higher mode generation/excitation and evanescent field optical manipulation. Standard, commercial, single-mode silica fibre is used throughout most of the experiments; this generally produces high-quality, single-mode, micro- or nanofibres when tapered in a flame-heated, pulling rig in the laboratory. Single mode fibre can also support higher transverse modes, when transmitting wavelengths below that of their defined single-mode regime cut-off. To investigate this, a first-order Laguerre-Gaussian beam, LG01 of 1064 nm wavelength and doughnut-shaped intensity profile is generated free space via spatial light modulation. This technique facilitates coupling to the LP11 fibre mode in two-mode fibre, and convenient, fast switching to the fundamental mode via computer-generated hologram modulation. Following LP11 mode loss when exponentially tapering 125μm diameter fibre, two mode fibre with a cladding diameter of 80μm is selected fir testing since it is more suitable for satisfying the adiabatic criteria for fibre tapering. Proving a fruitful endeavour, experiments show a transmission of 55% of the original LP11 mode set (comprising TE01, TM01, HE21e,o true modes) in submicron fibres. Furthermore, by observing pulling dynamics and progressive mode-lass behaviour, it is possible to produce a nanofibre which supports only the TE01 and TM01 modes, while suppressing the HE21e,o elements of the LP11 group. This result provides a basis for experimental studies of atom trapping via mode-interference, and offers a new set of evanescent field geometries for sensing and particle manipulation applications. The thesis highlights the experimental results of the research unit’s Cold Atom subgroup, who successfully integrated one such higher-mode nanofibre into a cloud of cold Rubidium atoms. This led to the detection of stronger signals of resonance fluorescence coupling into the nanofibre and for light absorption by the atoms due to the presence of higher guided modes within the fibre. Theoretical work on the impact of the curved nanofibre surface on the atomic-surface van der Waals interaction is also presented, showing a clear deviation of the potential from the commonly-used flat-surface approximation. Optical micro- and nanofibres are also useful tools for evanescent-field mediated optical manipulation – this includes propulsion, defect-induced trapping, mass migration and size-sorting of micron-scale particles in dispersion. Similar early trapping experiments are described in this thesis, and resulting motivations for developing a targeted, site-specific particle induction method are given. The integration of optical nanofibres into an optical tweezers is presented, facilitating individual and group isolation of selected particles, and their controlled positioning and conveyance in the evanescent field. The effects of particle size and nanofibre diameter on pronounced scattering is experimentally investigated in this systems, as are optical binding effects between adjacent particles in the evanescent field. Such inter-particle interactions lead to regulated self-positioning and particle-chain speed enhancements.

Innovations in learning and teaching approaches using game technologies - can "The Movies" teach how to make a movie?

The use of games technology in education is not a new phenomenon. Even back in the days of 286 processors, PCs were used in some schools along with (what looks like now) primitive simulation software to teach a range of different skills and techniques – from basic programming using Logo (the turtle style car with a pen at the back that could be used to draw on the floor – always a good way of attracting the attention of school kids!) up to quite sophisticated replications of physical problems, such as working out the trajectory of a missile to blow up an enemies’ tank. So why are games not more widely used in education (especially in FE and HE)? Can they help to support learners even at this advanced stage in their education? We aim to provide in this article an overview of the use of game technologies in education (almost as a small literature review for interested parties) and then go more in depth into one particular example we aim to introduce from this coming academic year (Sept. 2006) to help with teaching and assessment of one area of our Multimedia curriculum. Of course, we will not be able to fully provide the reader with data on how successful this is but we will be running a blog (http://themoviesineducation.blogspot.com/) to keep interested parties up to date with the progress of the project and to hopefully help others to set up similar solutions themselves. We will also only consider a small element of the implementation here and cover how the use of such assessment processes could be used in a broader context. The use of a game to aid learning and improve achievement is suggested because traditional methods of engagement are currently failing on some levels. By this it is meant that various parts of the production process we normally cover in our Multimedia degree are becoming difficult to monitor and continually assess.

Marginal adaptation and performance of bioactive dental restorative materials in deciduous and young permanent teeth

Objective: The aim of this study was to investigate the adaptation of different types of restorations towards deciduous and young permanent teeth. Materials and Methods: Class V cavities were prepared in deciduous and young permanent teeth and filled with different materials (a conventional glass-ionomer, a resin-modified glass-ionomer, a poly-acid-modified composite resin and a conventional composite resin). Specimens were aged in artificial saliva for 1, 6, 12 and 18 months, then examined by SEM. Results: The composite resin and the polyacid-modified composite had better marginal adaptation than the glass-ionomers,though microcracks developed in the enamel of the tooth. The glass-ionomers showed inferior marginal quality and durability, but no microcracking of the enamel. The margins of the resin-modified glass-ionomer were slightly superior to the conventional glass-ionomer. Conditioning improved the adaptation of the composite resin, but the type of tooth made little or no difference to the performance of the restorative material. All materials were associated with the formation of crystals in the gaps between the filling and the tooth; the quantity and shape of these crystals varied with the material. Conclusions: Resin-based materials are generally better at forming sound, durable margins in deciduous and young permanent teeth than cements, but are associated with microcracks in the enamel. All fluoride-releasing materials give rise to crystalline deposits.

Fostering 'habits of reflection, independent study and free inquiry': an analysis of the short-lived phenomenon of General/Liberal Studies in English vocational education and training

In 1957, 12 years after the end of World War II, the Ministry of Education issued Circular 323 to promote the development of an element of ‘liberal studies’ in courses offered by technical and further education (FE) colleges in England. This was perceived to be in some ways a peculiar or uncharacteristic development. However, it lasted over 20 years, during which time most students on courses in FE colleges participated in what were termed General or Liberal Studies classes that complemented and/or contrasted with the technical content of their vocational programmes. By the end of the 1970s, these classes had changed in character, moving away from the concept of a ‘liberal education’ towards a prescribed diet of ‘communication studies’. The steady decline in apprenticeship numbers from the late 1960s onwards accelerated in the late 1970s, resulting in a new type of student (the state-funded ‘trainee’) into colleges whose curriculum would be prescribed by the Manpower Services Commission. This paper examines the Ministry’s thinking and charts the rise and fall of a curriculum phenomenon that became immortalised in the ‘Wilt’ novels of Tom Sharpe. The paper argues that the Ministry of Education’s concerns half a century ago are still relevant now, particularly as fresh calls are being made to raise the leaving age from compulsory education to 18, and in light of attempts in England to develop new vocational diplomas for full-time students in schools and colleges.

Differential Scanning Calorimetry Study and Computer Modeling of b a Phase Transformation in Ti-6Al-4V Alloy

The relationship between heat-treatment parameters and microstructure in titanium alloys has so far been mainly studied empirically, using characterization techniques such as microscopy. Calculation and modeling of the kinetics of phase transformation have not yet been widely used for these alloys. Differential scanning calorimetry (DSC) has been widely used for the study of a variety of phase transformations. There has been much work done on the calculation and modeling of the kinetics of phase transformations for different systems based on the results from DSC study. In the present work, the kinetics of the transformation in a Ti-6Al-4V titanium alloy were studied using DSC, at continuous cooling conditions with constant cooling rates of 5 °C, 10 °C, 20 °C, 30 °C, 40 °C, and 50 °C/min. The results from calorimetry were then used to trace and model the transformation kinetics in continuous cooling conditions. Based on suitably interpreted DSC results, continuous cooling–transformation (CCT) diagrams were calculated with lines of isotransformed fraction. The kinetics of transformation were modeled using the Johnson–Mehl–Avrami (JMA) theory and by applying the "concept of additivity." The JMA kinetic parameters were derived. Good agreement between the calculated and experimental transformed fractions is demonstrated. Using the derived kinetic parameters, the transformation in a Ti-6Al-4V alloy can be described for any cooling path and condition. An interpretation of the results from the point of view of activation energy for nucleation is also presented.

Biaxial Characterisation of Materials for Thermoforming and Blow Moulding

During free surface moulding processes such as thermoforming and blow moulding heated polymer materials are subjected to rapid biaxial deformation as they are drawn into the shape of a mould. In the development of process simulations it is therefore essential to be able to accurately measure and model this behaviour. Conventional uniaxial test methods are generally inadequate for this purpose and this has led to the development of specialised biaxial test rigs. In this paper the results of several programmes of biaxial tests conducted at Queen’s University are presented and discussed. These have included tests on high impact polystyrene (HIPS), polypropylene (PP) and aPET, and the work has involved a wide variety of experimental conditions. In all cases the results clearly demonstrate the unique characteristics of materials when subjected to biaxial deformation. PP draws the highest stresses and it is the most temperature sensitive of the materials. aPET is initially easier to form but exhibits strain hardening at higher strains. This behaviour is increased with increasing strain rate but at very high strain rates these effects are increasingly mollified by adiabatic heating. Both aPET and PP (to a lesser degree) draw much higher stresses in sequential stretching showing that this behaviour must be considered in process simulations. HIPS showed none of these effects and it is the easiest material to deform.

Disabled Children Negotiating School Life: Agency, Difference and Teaching Practice

This paper explores the school experiences of seven 11–14 year old disabled children, and focuses on their agency as they negotiated a complex, changing, and often challenging social world at school where “difference” was experienced in negative ways. The paper draws on ethnographic data from a wider three-year study that explores the influence of school experiences on both disabled and non-disabled children’s identity as they make the transition from primary to secondary school in regular New Zealand schools (although the focus of the present paper is only on the experiences of disabled children). The wider study considers how Maori (indigenous people of Aotearoa/New Zealand) and Pakeha (New Zealanders of NZ European descent) disabled children and their non- disabled matched peers (matched for age, gender and classroom) understand their personal identity, and how factors relating to transition (from primary to secondary school); culture; impairment (in the case of disabled children); social relationships; and school experience impact on children’s identities. Data on Maori children’s school experiences is currently being collected, and is not yet available for inclusion in this paper. On the basis of our observations in schools we will illustrate how disabled children felt and were made to feel different through an array of structural barriers such as separate provision for disabled students, and peer and teacher attitudes to diversity. However, we agree with Davis, Watson, Shakespeare and Corker’s (2003) interpretation that disabled children’s rights and participation at school are also under attack from a “deeper cultural division” (p. 205) in schools based on discourses of difference and normality. While disabled students in our study were trying to actively construct and shape their social and educational worlds, our data also show that teachers and peers have the capacity to either support or supplant these attempts to be part of the group of “all children”. We suggest that finding solutions that support disabled children’s full inclusion and participation at school requires a multi-faceted and systemic approach focused on a pedagogy for diverse learners, and on a consistent and explicitly inclusive policy framework centred on children’s rights.

Rapid detection of health-care-associated bloodstream infection in critical care using multipathogen real-time polymerase chain reaction technology: a diagnostic accuracy study and systematic review

Background: There is growing interest in the potential utility of real-time polymerase chain reaction (PCR) in diagnosing bloodstream infection by detecting pathogen deoxyribonucleic acid (DNA) in blood samples within a few hours. SeptiFast (Roche Diagnostics GmBH, Mannheim, Germany) is a multipathogen probe-based system targeting ribosomal DNA sequences of bacteria and fungi. It detects and identifies the commonest pathogens causing bloodstream infection. As background to this study, we report a systematic review of Phase III diagnostic accuracy studies of SeptiFast, which reveals uncertainty about its likely clinical utility based on widespread evidence of deficiencies in study design and reporting with a high risk of bias. 

Objective: Determine the accuracy of SeptiFast real-time PCR for the detection of health-care-associated bloodstream infection, against standard microbiological culture. 

Design: Prospective multicentre Phase III clinical diagnostic accuracy study using the standards for the reporting of diagnostic accuracy studies criteria. 

Setting: Critical care departments within NHS hospitals in the north-west of England. 

Participants: Adult patients requiring blood culture (BC) when developing new signs of systemic inflammation. 

Main outcome measures: SeptiFast real-time PCR results at species/genus level compared with microbiological culture in association with independent adjudication of infection. Metrics of diagnostic accuracy were derived including sensitivity, specificity, likelihood ratios and predictive values, with their 95% confidence intervals (CIs). Latent class analysis was used to explore the diagnostic performance of culture as a reference standard. 

Results: Of 1006 new patient episodes of systemic inflammation in 853 patients, 922 (92%) met the inclusion criteria and provided sufficient information for analysis. Index test assay failure occurred on 69 (7%) occasions. Adult patients had been exposed to a median of 8 days (interquartile range 4–16 days) of hospital care, had high levels of organ support activities and recent antibiotic exposure. SeptiFast real-time PCR, when compared with culture-proven bloodstream infection at species/genus level, had better specificity (85.8%, 95% CI 83.3% to 88.1%) than sensitivity (50%, 95% CI 39.1% to 60.8%). When compared with pooled diagnostic metrics derived from our systematic review, our clinical study revealed lower test accuracy of SeptiFast real-time PCR, mainly as a result of low diagnostic sensitivity. There was a low prevalence of BC-proven pathogens in these patients (9.2%, 95% CI 7.4% to 11.2%) such that the post-test probabilities of both a positive (26.3%, 95% CI 19.8% to 33.7%) and a negative SeptiFast test (5.6%, 95% CI 4.1% to 7.4%) indicate the potential limitations of this technology in the diagnosis of bloodstream infection. However, latent class analysis indicates that BC has a low sensitivity, questioning its relevance as a reference test in this setting. Using this analysis approach, the sensitivity of the SeptiFast test was low but also appeared significantly better than BC. Blood samples identified as positive by either culture or SeptiFast real-time PCR were associated with a high probability (> 95%) of infection, indicating higher diagnostic rule-in utility than was apparent using conventional analyses of diagnostic accuracy. 

Conclusion: SeptiFast real-time PCR on blood samples may have rapid rule-in utility for the diagnosis of health-care-associated bloodstream infection but the lack of sensitivity is a significant limiting factor. Innovations aimed at improved diagnostic sensitivity of real-time PCR in this setting are urgently required. Future work recommendations include technology developments to improve the efficiency of pathogen DNA extraction and the capacity to detect a much broader range of pathogens and drug resistance genes and the application of new statistical approaches able to more reliably assess test performance in situation where the reference standard (e.g. blood culture in the setting of high antimicrobial use) is prone to error.

Hydroprocessing of waste cooking oil over a dispersed nano catalyst: Kinetics study and temperature effect

The kinetics of hydrodeoxygenation of waste cooking oil (WCO) is investigated with unsupported CoMoS catalysts. A kinetic model is established and a comprehensive analysis of each reaction pathway is carried out. The results show that hydrodecarbonylation/decarboxylation (HDC) routes are the predominant reaction pathways in the elimination of oxygen, with the rate constant three times as high as that of hydrodeoxygenation (HDO). However, the HDC activity of the CoMoS catalyst deactivates due to gradual loss of sulfur from the catalyst. HDO process is insensitive to the sulfur deficiency. The kinetic modeling shows that direct hydrodecarbonylation of fatty acids dominates the HDC routes and, in the HDO route, fatty acids are transferred to aldehydes/alcohols and then to C-18 hydrocarbons, a final product, and the reduction of acids is the rate limiting step. The HDO route via alcohols is dominant over aldehydes due to a significantly higher reaction rate constant. The difference of C-18/C-17 ratio in unsupported and supported catalysts show that a support with Lewis acid sites may play an important role in the selectivity for the hydrodeoxygenation pathways and promoting the final product quality