Safety assessment of underground vehicles passing over highly resilient curved tracks in the presence of a broken rail

Vehicle–track interaction for a new resilient slab track designed to reduce noise and vibration levels was analysed, in order to assess the derailment risk on a curved track when encountering a broken rail. Sensitivity of the rail support spacing of the relative position of the rail breakage between two adjacent rail supports and of running speed were analysed for two different elasticities of the rail fastening system. In none of the cases analysed was observed an appreciable difference between either of the elastic systems. As was expected, the most unfavourable situations were those with greater rail support spacing and those with greater distance from the breakage to the nearest rail support, although in none of the simulations performed did a derailment occur when running over the broken rail. When varying the running speed, the most favourable condition was obtained for an intermediate speed, due to the superposition of two antagonistic effects.

Computation of Independent Sensitivities Using Maggi’s Formulation

Computation of Independent Sensitivities Using Maggi’s Formulation

The Advantage of Arriving First: Characteristic Times in Finite Size Populations of Error-Prone Replicators

We study the evolution of a finite size population formed by mutationally isolated lineages of error-prone replicators in a two-peak fitness landscape. Computer simulations are performed to gain a stochastic description of the system dynamics. More specifically, for different population sizes, we compute the probability of each lineage being selected in terms of their mutation rates and the amplification factors of the fittest phenotypes. We interpret the results as the compromise between the characteristic time a lineage takes to reach its fittest phenotype by crossing the neutral valley and the selective value of the sequences that form the lineages. A main conclusion is drawn: for finite population sizes, the survival probability of the lineage that arrives first to the fittest phenotype rises significantly

Robust control of underactuated wheeled mobile manipulators using GPI disturbance observers

This article describes the design of a linear observer–linear controller-based robust output feedback scheme for output reference trajectory tracking tasks in the case of nonlinear, multivariable, nonholonomic underactuated mobile manipulators. The proposed linear feedback scheme is based on the use of a classical linear feedback controller and suitably extended, high-gain, linear Generalized Proportional Integral (GPI) observers, thus aiding the linear feedback controllers to provide an accurate simultaneous estimation of each flat output associated phase variables and of the exogenous and perturbation inputs. This information is used in the proposed feedback controller in (a) approximate, yet close, cancelations, as lumped unstructured time-varying terms, of the influence of the highly coupled nonlinearities, and (b) the devising of proper linear output feedback control laws based on the approximate estimates of the string of phase variables associated with the flat outputs simultaneously provided by the disturbance observers. Simulations reveal the effectiveness of the proposed approach.

Sensitivity analysis to assess the influence of the inertial properties of railway vehicle bodies on the vehicle’s dynamic behaviour

A sensitivity analysis has been performed to assess the influence of the inertial properties of railway vehicles on their dynamic behaviour. To do this, 216 dynamic simulations were performed modifying, one at a time, the masses, moments of inertia and heights of the centre of gravity of the carbody, the bogie and the wheelset. Three values were assigned to each parameter, corresponding to the percentiles 10, 50 and 90 of a data set stored in a database of railway vehicles. After processing the results of these simulations, the analyzed parameters were sorted by increasing influence. It was also found which of these parameters could be estimated with a lesser degree of accuracy for future simulations without appreciably affecting the simulation results. In general terms, it was concluded that the most sensitive inertial properties are the mass and the vertical moment of inertia, and the least sensitive ones the longitudinal and lateral moments of inertia.

Assessment of the influence of the elastic properties of rail vehicle suspensions on safety, ride quality and track fatigue

A sensitivity analysis has been performed to assess the influence of the elastic properties of railway vehicle suspensions on the vehicle dynamic behaviour. To do this, 144 dynamic simulations were performed modifying, one at a time, the stiffness and damping coefficients, of the primary and secondary suspensions. Three values were assigned to each parameter, corresponding to the percentiles 10, 50 and 90 of a data set stored in a database of railway vehicles.After processing the results of these simulations, the analyzed parameters were sorted by increasing influence. It was also found which of these parameters could be estimated with a lesser degree of accuracy in future simulations without appreciably affecting the simulation results. In general terms, it was concluded that the highest influences were found for the longitudinal stiffness and the lateral stiffness of the primary suspension, and the lowest influences for the vertical stiffness and the vertical damping of the primary suspension, with the parameters of the secondary suspension showing intermediate influences between them.

Controlling systems with a single actuator

In this paper the problem of designing a single actuator control for a class of systems is addressed. The existence of such control is studied and several ways for designing such control are provided. The results depend either on the rational canonical form or on the Jordan structure associated with the matrix which characterizes the system dynamics. The constructed control laws can be employed in the design of minimum cost controllers for a large variety of systems.

Modelado de un servicio de M-Salud basado en dinámica de sistemas

En términos generales, m-salud puede definirse como el conjunto de sistemas de información, sensores médicos y tecnologías de comunicaciones móviles para el cuidado de la salud. La creciente disponibilidad, miniaturización, comportamiento, velocidades de transmisión de datos cada vez mayores y la esperada convergencia de tecnologías de red y comunicaciones inalámbricas en torno a los sistemas de salud móviles están acelerando el despliegue de estos sistemas y la provisión de servicios de m-salud, como por ejemplo, la teleasistencia móvil. El concepto emergente de m-salud conlleva retos importantes (estudios técnicos, análisis, modelado de la provisión de servicios, etc.) que hay que afrontar para impulsar la evolución de los sistemas y servicios de e-salud ofrecidos desde tecnologías de telecomunicación que utilizan acceso por cable y redes fijas, hacia configuraciones móviles e inalámbricas de última generación. En este trabajo se analizará primeramente el significado e implicaciones de m-salud y la situación en la que se encuentra; los retos a los que hay que enfrentarse para su implantación y provisión así como su tendencia. De los múltiples y diferentes servicios que se pueden proveer se ha identificado el servicio de Localización de Personas LoPe, lanzado por Cruz Roja en febrero de 2007, para teleasistencia móvil y que permite conocer en todo momento la ubicación de la persona que porta su dispositivo asociado. Orientado a personas con discapacidad, en situación de riesgo o dependencia por deterioro cognitivo, tiene como objetivo ayudarlas a recuperar su autonomía personal. La provisión de este servicio se modelará mediante dinámica de sistemas, ya que esta teoría se considera idónea para modelar sistemas complejos que evolucionan con el tiempo. El resultado final es un modelo que implementado a través de la herramienta Studio 8® de la compañía noruega Powersim Software AS nos ha permitido analizar y evaluar su comportamiento a lo largo del tiempo, además de permitirnos extraer conclusiones sobre el mismo y plantear futuras mejoras sobre el servicio. ABSTRACT. In general terms, m-health can be defined as “mobile computing, medical sensor, and communications technologies for health care.” The increased availability, miniaturization, performance, enhanced data rates, and the expected convergence of future wireless communication and network technologies around mobile health systems are accelerating the deployment of m-health systems and services, for instance, mobile telecare. The emerging concept of m-health involves significant challenges (technical studies, analysis, modeling of service provision, etc.) that must be tackled to drive the development of e-health services and systems offered by telecommunication technologies that use wired and fixed networks towards wireless and mobile new generation networks. Firstly, in this master’s thesis, the meaning and implications of m-health and its current situation are analyzed. This analysis also includes the challenges that must be tackled for the implementation and provision of m-health technologies and services and the m-health trends. Among the many different m-health services already delivered, the Localización de Personas LoPe service has been identified to work with it. This service, launched by Spanish Red Cross in February 2007, enables to locate people who carry the associated device. It’s aimed at people with disabilities, at risk or dependency due to cognitive impairment and helps them to recover their personal autonomy. The provision of this service will be modeled with system dynamics considering that this theory suits very well the modeling of complex systems which evolve over time. The final result is a system dynamics model of the service implemented with Studio 8® tool developed by Powersim Software AS, a Norwegian company. This model has allowed us to analyze and evaluate its behaviour over time, as well as to draw conclusions and to consider some future improvements in the service.

Impact of Spatial Soil and Climate Input Data Aggregation on Regional Yield Simulations

This work was financially supported by the German Federal Ministry of Food and Agriculture (BMEL) through the Federal Office for Agriculture and Food (BLE), (2851ERA01J). FT and RPR were supported by FACCE MACSUR (3200009600) through the Finnish Ministry of Agriculture and Forestry (MMM). EC, HE and EL were supported by The Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (220-2007-1218) and by the strategic funding ‘Soil-Water-Landscape’ from the faculty of Natural Resources and Agricultural Sciences (Swedish University of Agricultural Sciences) and thank professor P-E Jansson (Royal Institute of Technology, Stockholm) for support. JC, HR and DW thank the INRA ACCAF metaprogramm for funding and Eric Casellas from UR MIAT INRA for support. CB was funded by the Helmholtz project “REKLIM—Regional Climate Change”. CK was funded by the HGF Alliance “Remote Sensing and Earth System Dynamics” (EDA). FH was funded by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) under the Grant FOR1695. FE and SS acknowledge support by the German Science Foundation (project EW 119/5-1). HH, GZ, SS, TG and FE thank Andreas Enders and Gunther Krauss (INRES, University of Bonn) for support. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Intermediate-term earthquake prediction.

An earthquake of magnitude M and linear source dimension L(M) is preceded within a few years by certain patterns of seismicity in the magnitude range down to about (M - 3) in an area of linear dimension about 5L-10L. Prediction algorithms based on such patterns may allow one to predict approximately 80% of strong earthquakes with alarms occupying altogether 20-30% of the time-space considered. An area of alarm can be narrowed down to 2L-3L when observations include lower magnitudes, down to about (M - 4). In spite of their limited accuracy, such predictions open a possibility to prevent considerable damage. The following findings may provide for further development of prediction methods: (i) long-range correlations in fault system dynamics and accordingly large size of the areas over which different observed fields could be averaged and analyzed jointly, (ii) specific symptoms of an approaching strong earthquake, (iii) the partial similarity of these symptoms worldwide, (iv) the fact that some of them are not Earth specific: we probably encountered in seismicity the symptoms of instability common for a wide class of nonlinear systems.

A contribution on modeling methodologies for multibody systems.

Multibody System Dynamics has been responsible for revolutionizing Mechanical Engineering Design by using mathematical models to simulate and optimize the dynamic behavior of a wide range of mechanical systems. These mathematical models not only can provide valuable informations about a system that could otherwise be obtained only by experiments with prototypes, but also have been responsible for the development of many model-based control systems. This work represents a contribution for dynamic modeling of multibody mechanical systems by developing a novel recursive modular methodology that unifies the main contributions of several Classical Mechanics formalisms. The reason for proposing such a methodology is to motivate the implementation of computational routines for modeling complex multibody mechanical systems without being dependent on closed source software and, consequently, to contribute for the teaching of Multibody System Dynamics in undergraduate and graduate levels. All the theoretical developments are based on and motivated by a critical literature review, leading to a general matrix form of the dynamic equations of motion of a multibody mechanical system (that can be expressed in terms of any set of variables adopted for the description of motions performed by the system, even if such a set includes redundant variables) and to a general recursive methodology for obtaining mathematical models of complex systems given a set of equations describing the dynamics of each of its uncoupled subsystems and another set describing the constraints among these subsystems in the assembled system. This work also includes some discussions on the description of motion (using any possible set of motion variables and admitting any kind of constraint that can be expressed by an invariant), and on the conditions for solving forward and inverse dynamics problems given a mathematical model of a multibody system. Finally, some examples of computational packages based on the novel methodology, along with some case studies, are presented, highlighting the contributions that can be achieved by using the proposed methodology.

Mitigação de falhas críticas em sistemas produtivos.

O cenário competitivo e globalizado em que as empresas estão inseridas, sobretudo a partir do século XXI, associados a ciclos de vida cada vez menores dos produtos, rigorosos requisitos de qualidade, além de políticas de preservação do meio ambiente, com redução de consumo energético e de recursos hídricos, somadas às exigências legais de melhores condições de trabalho, resultaram em uma quebra de paradigma nos processos produtivos até então concebidos. Como solução a este novo cenário produtivo pode-se citar o extenso uso da automação industrial, fato que resultou em sistemas cada vez mais complexos, tanto do ponto de vista estrutural, em função do elevado número de componentes, quanto da complexidade dos sistemas de controle. A previsibilidade de todos os estados possíveis do sistema torna-se praticamente impossível. Dentre os estados possíveis pode-se citar os estados de falha que, dependendo da severidade do efeito associado à sua ocorrência, podem resultar em sérios danos para o homem, o meio ambiente e às próprias instalações, caso não sejam corretamente diagnosticados e tratados. Fatos recentes de catástrofes relacionadas à sistemas produtivos revelam a necessidade de se implementar medidas para prevenir e para mitigar os efeitos da ocorrência de falhas, com o objetivo de se evitar a ocorrência de catástrofes. De acordo com especialistas, os Sistemas Instrumentados de Segurança SIS, referenciados em normas como a IEC 61508 e IEC 61511, são uma solução para este tipo de problema. Trabalhos publicados tratam de métodos para a implementação de camadas SIS de prevenção, porém com escassez de trabalhos para camadas SIS de mitigação. Em função do desconhecimento da dinâmica do sistema em estado de falha, técnicas tradicionais de modelagem tornam-se inviáveis. Neste caso, o uso de inteligência artificial, como por exemplo a lógica fuzzy, pode se tornar uma solução para o desenvolvimento do algoritmo de controle, associadas a ferramentas de edição, modelagem e geração dos códigos de controle. A proposta deste trabalho é apresentar uma sistemática para a implementação de um sistema de controle para a mitigação de falhas críticas em sistemas produtivos, com referência às normas IEC 61508/61511, com ação antecipativa à ocorrência de catástrofes.

A hydrological–economic model for sustainable groundwater use in sparse-data drylands: Application to the Amtoudi Oasis in southern Morocco, northern Sahara

A hydrological–economic model is introduced to describe the dynamics of groundwater-dependent economics (agriculture and tourism) for sustainable use in sparse-data drylands. The Amtoudi Oasis, a remote area in southern Morocco, in the northern Sahara attractive for tourism and with evidence of groundwater degradation, was chosen to show the model operation. Governing system variables were identified and put into action through System Dynamics (SD) modeling causal diagrams to program basic formulations into a model having two modules coupled by the nexus ‘pumping’: (1) the hydrological module represents the net groundwater balance (G) dynamics; and (2) the economic module reproduces the variation in the consumers of water, both the population and tourists. The model was operated under similar influx of tourists and different scenarios of water availability, such as the wet 2009–2010 and the average 2010–2011 hydrological years. The rise in international tourism is identified as the main driving force reducing emigration and introducing new social habits in the population, in particular concerning water consumption. Urban water allotment (PU) was doubled for less than a 100-inhabitant net increase in recent decades. The water allocation for agriculture (PI), the largest consumer of water, had remained constant for decades. Despite that the 2-year monitoring period is not long enough to draw long-term conclusions, groundwater imbalance was reflected by net aquifer recharge (R) less than PI + PU (G < 0) in the average year 2010–2011, with net lateral inflow from adjacent Cambrian formations being the largest recharge component. R is expected to be much less than PI + PU in recurrent dry spells. Some low-technology actions are tentatively proposed to mitigate groundwater degradation, such as: wastewater capture, treatment, and reuse for irrigation; storm-water harvesting for irrigation; and active maintenance of the irrigation system to improve its efficiency.

Changes in organic matter production and accumulation as a mechanism for isotopic evolution in the Mesoproterozoic ocean

Mesoproterozoic marine successions worldwide record a shift in average delta(13)C values from 0 to +3.5parts per thousand, with the latter value evident in successions younger than 1250 Ma. New carbon isotope data from the similar to 1300 to 1270 Ma Dismal Lakes Group, Arctic Canada, provide further insight into this fundamental transition. Data reveal that the shift to higher VC values was gradual and marked by occasional excursions to values less than 0 parts per thousand. When compared to records from older and younger marine successions, it is evident that the difference between isotopic minima and maxima increased with time, indicating that the marine system evolved to become isotopically more variable. We interpret these patterns to record an increase in the crustal inventory of organic carbon, reflecting eukaryotic diversification and a change in the locus of organic carbon burial to include anoxic deep marine sites where preservation potential was high. We speculate that the release of O-2 to Earth's surface environments associated with increased organic carbon storage induced irreversible changes in the Mesoproterozoic biosphere, presaging the more extreme environmental and evolutionary developments of the Neoproterozoic.

Stochastic delay differential equations for genetic regulatory networks

Time delay is an important aspect in the modelling of genetic regulation due to slow biochemical reactions such as gene transcription and translation, and protein diffusion between the cytosol and nucleus. In this paper we introduce a general mathematical formalism via stochastic delay differential equations for describing time delays in genetic regulatory networks. Based on recent developments with the delay stochastic simulation algorithm, the delay chemical masterequation and the delay reaction rate equation are developed for describing biological reactions with time delay, which leads to stochastic delay differential equations derived from the Langevin approach. Two simple genetic regulatory networks are used to study the impact of' intrinsic noise on the system dynamics where there are delays. (c) 2006 Elsevier B.V. All rights reserved.