Improving the solubility of the antichagasic drug benznidazole through formation of inclusion complexes with cyclodextrins

This study describes unpublished research on improving the solubility of benznidazole by the formation of an inclusion complex. The cyclodextrins selected were αCD, βCD, γCD, HPβCD, RMβCD and SBβCD. All complexes were obtained in solution, presenting 1:1 stoichiometry according to the phase solubility diagram. The highest association constants were obtained with RMβCD and SBβCD, being selected for attainment of solid state complexes. These were characterized using XRD, SEM and dissolution test. The data obtained suggest the formation of complexes and indicate that these may provide a promising alternative way of developing solid doses of drug with suitable biopharmaceutical properties.

Photochemical characteristics of diclofenac and its photodegradation of inclusion complexes with β-cyclodextrins

Diclofenac is one of most frequently detected compounds in the water cycle. In this work, the effect of initial concentration, liquid inclusion complexes with β-Cyclodextrins (β-CDs) on the photodegradation of diclofenac were studied. Six phototransformation products were detected by HPLC chromatograms. UV-absorption spectra of diclofenac and phototransformation products were determined. One of the phototransformation products was identified. The degradation followed pseudo-first-order kinetics. The experiment showed that irradiation of diclofenac in the presence of β-CDs increase photodegradation rate and determined the optimal molar ratio of diclofenac to β-CDs as 1:2. The reduced photohaemolytic activity of diclofenac in the presence of β-CDs may be attributed to the sequestering and stabilizing of the radical intermediates and /or photoproducts by complexation.

Synthesis and characterization of Fe(III)-piperazine-derived complexes encapsulated in zeolite Y

Zeolite-encapsulated complexes have been widely applied in hydrocarbon oxidation catalysis. The "ship-in-a-bottle" encapsulation of iron(III) complexes containing piperazine and piperazine-derivative ligands in zeolite-Y is described. The flexible ligand methodology was employed and the efficiency and reproducibility of the procedure was investigated. The catalysts were characterized employing several techniques and the results indicate the presence of coordinated and uncoordinated iron(III) ions inside and outside the zeolitic cage.

Ni(II), Cu(II), AND Zn(II) COMPLEXES DERIVED FROM A NEW SCHIFF BASE 2-((Z)-(3-METHYLPYRIDIN-2- YLEIMINO)METHYL)PHENOL AND SYNTHESIS OF NANO SIZED METAL OXIDE PARTICLES FROM THESE COMPOUNDS

Synthesis, spectral identification, and magnetic properties of three complexes of Ni(II), Cu(II), and Zn(II) are described. All three compounds have the general formula [M(L)2(H2O)2], where L = deprotonated phenol in the Schiff base 2-((z)-(3-methylpyridin-2-yleimino)methyl)phenol. The three complexes were synthesized in a one-step synthesis and characterized by elemental analysis, Fourier transform infrared spectroscopy, electronic spectra, X-ray diffraction (XRD), and room temperature magnetic moments. The Cu(II) and Ni(II) complexes exhibited room temperature magnetic moments of 1.85 B.M. per copper atom and 2.96 B.M. per nickel atom. The X-band electron spin resonance spectra of a Cu(II) sample in dimethylformamide frozen at 77 K (liquid nitrogen temperature) showed a typical ΔMS = ± 1 transition. The complexes ([M(L)2(H2O)2]) were investigated by the cyclic voltammetry technique, which provided information regarding the electrochemical mechanism of redox behavior of the compounds. Thermal decomposition of the complexes at 750 ºC resulted in the formation of metal oxide nanoparticles. XRD analyses indicated that the nanoparticles had a high degree of crystallinity. The average sizes of the nanoparticles were found to be approximately 54.3, 30.1, and 44.4 nm for NiO, CuO, and ZnO, respectively.

Thermoanalytical study of the complexes of 4-dimetilaminocinnamylidenepiruvate with manganese (II), cobalt (II), nickel (II), cupper (II), zinc (II) and lead (II), in the solid state

Solid state compounds M-4-DMCP, where 4-DMCP is 4-dimethylaminocinnamylidenepyruvate and M represents Mn (II), Co (II), Ni (II), Cu (II), Zn (II) and Pb (II) were prepared. These compounds were studied by thermoanalitycal techniques: thermogravimetry (TG), derivative thermogravimetry (DTG), differential scanning calorimetry (DSC), X-ray diffraction powder patterns and complexometric titration with EDTA. From the results obtained by the complexometric titration with EDTA, TG, DTG and DSC curves, was possible to establish the hydration degree, stoichiometry and thermal stability of the prepared compounds.

Thermal degradation behaviour of some polydithiooxamide metal complexes

The thermal decomposition behavior of the Fe(II), Co(II), Ni(II) and Zn(II) complexes of polydithiooxamide has been investigated by thermogravimetric analysis (TGA) at a heating rate of 20°C min-1 under nitrogen. The Coats-Redfern integral method is used to evaluate the kinetic parameters for the successive steps in the decomposition sequence observed in the TGA curves. The processes of thermal decomposition taking place in the four complexes are studied comparatively as the TGA curves indicate the difference in the thermal decomposition behavior of these complexes. The thermal stabilities of these complexes are discussed in terms of repulsion among electron pairs in the valence shell of the central ion and electronegativity effects.

Thermal behaviour of TEGMMA copolymers obtained by photopolymerization using iron complexes

Copolymers of methyl methacrylate (MMA) and triethyleneglycol dimethacrylate (TEGDMA) obtained by photoinitiated polymerization using Fe(III) complexes were submitted to thermogravimetry (TGA) under dynamic air atmosphere and N2, and differential scanning calorimetric analysis (DSC). Thermal events were observed only between 90 - 110 ºC. Glass transitions were observed at ca. 100 ºC, followed by an exothermic peak at 170 ºC. The exothermic peak was assigned to a thermal curing process due to the presence of unreacted vinyl groups of the monomers. DSC revealed to be a useful tool to evaluate the curing completeness in this kind of material, using small amounts of sample in relatively short time.

Electrochemical study and dependence of 'transition state' in Co(II) and Ni(II) complexes with some antibiotics and cephalothin

Electrode kinetics and study of 'transition state' with applied potential in case of [M - antibiotics - cephalothin] system were reported at pH = 7.30 ± 0.01 at suitable supporting electrolyte at 25.0ºC. The M = Co or Ni and antibiotics were doxycycline, chlortetracycline, oxytetracycline, tetracycline, minocycline, amoxicillin and chloramphenicol used as primary ligands and cephalothin as secondary ligand. Kinetic parameters viz. transfer coefficient (a), degree of irreversibility (l), diffusion coefficient (D) and rate constant (k) were determined. The values of a and k varied from 0.41 to 0.59 and 2.60 X 10-3 cm s-1 to 9.67 X 10-3 cm s-1 in case of [Co - antibiotics - cephalothin] system. In case of [Ni - antibiotics - cephalothin], a and k varied from 0.41 to 0.58 and 2.34 X 10-3 cm s-1 to 9.19 X 10-3 cm s-1 respectively confirmed that transition state behaves between oxidant and reductant response to applied potential and it adjusts it self in such a way that the same is located midway between dropping mercury electrode and solution interface. The values of rate constant confirmed the quasireversible nature of electrode processes. The stability constants (logb) of complexes were also determined.

Complexes of 3,4-dimethoxybenzoic acid anion with Cu(II), Co(II), La(III), and Nd(III)

Physico-chemical properties of 3,4-dimethoxybenzoates of Co(II), Cu(II), La(III) and Nd(III) were studied. The complexes were obtained as hydrated or anhydrous polycrystalline solids with a metal ion-ligand mole ratio of 1 : 2 for divalent ions and of 1 : 3 in the case of trivalent cations. Their colours depend on the kind of central ion: pink for Co(II) complex, blue for Cu(II), white for La(III) and violet for Nd(III) complexes. The carboxylate groups in these compounds are monodentate, bidentate bridging or chelating and tridentate ligands. Their thermal decomposition was studied in the range of 293-1173 K. Hydrated complexes lose crystallization water molecules in one step and form anhydrous compounds, that next decompose to the oxides of respective metals. 3,4 - Dimethoxybenzoates of Co(II) is directly decomposed to the appropriate oxide and that of Nd(III) is also ultimately decomposed to its oxide but with the intemediate formation of Nd2O2CO3.. The magnetic moment values of 3,4-dimethoxybenzoates determined in the range of 76-303 K change from 4.22 µB to 4.61 µB for Co(II) complex , from 0.49 µB to 1.17 µB for Cu(II) complex , and from 2.69 µB to 3.15 µB for Nd(III) complex.

Stability constants and thermodynamic parameters of cadmium complexes with sulfonamides and cephapirin

Stability constant (log beta) and thermodynamic parameters of Cd2+ complexes with sulfonamide and cephapirin were determined by Polarographic technique at pH = 7.30 ± 0.01 and µ = 1.0 M KNO3 at 250°C. The sulfonamides were sulfadiazine, sulfisoxazole, sulfamethaxazole, sulfamethazine, sulfathiazole, sulfacetamide and sulfanilamide used as primary ligands and cephapirin as secondary ligand. Cd2+ formed 1:1:1, 1:2:1 and 1:1:2 complexes. The nature of electrode processes were reversible and diffusion controlled. The stability constants and thermodynamic parameters (deltaG, deltaH and deltaS) were determined. The formation of the metal complexes has been found to be spontaneous, exothermic in nature, and entropically unfavourable at higher temperature.

Study of complexes of cadmium with some L-amino acids and vitamin-C by voltammetric technique

Voltammetric technique was used to study the binary and ternary complexes of cadmium with L-amino acids and vitamin-C (L-ascorbic acid) at pH =7.30 ± 0.01, µ = 1.0M KNO3 at 25ºC and 35ºC. Cd (II) formed 1:1:1, 1:1:2 and 1:2:1 complexes with L-lysine, L-ornithine, L-threonine, L-serine, L-phenylglycine, L-phenylalanine, L-glutamic acid and L-aspartic acid used as primary ligands and L-ascorbic acid used as secondary ligand. The trend of stability constant of complexes was L-lysine < L-ornithine < L-threonine < L-serine < L-phenylglycine < L-phenylalanine < L-glutamic acid < L-aspartic acid which can be explained on the basis of size, basicity and steric hindrance of ligands. The values of stability constant (log β) varied from 2.23 to11.33 confirm that these drugs i.e. L-amino acids or in combination with L-ascorbic acid or their complexes could be used against Cd (II) toxicity. The study has been carried out at 35ºC also to determine the thermodynamic parameters such as enthalpy change (ΔH), Free energy change (ΔG) and entropy change (ΔS) respectively.

Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilites were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10-4mol/dm³.

Formation of polyelectrolyte multilayers and polyelectrolyte complexes in dual polymer treatment of papermaking pulp

The goal of this study was to find a new approach to modify chemically the properties of paper by improving fiber quality. This Master’s thesis includes the multiple polymer treatment in general and themeasurement methods with which the formation of multilayers and complexes can be noticed. The treatment by an oppositely charged dual polymer system is a good approach to increase paper strength. In this work, starch, a cationic polymer, and carboxymethyl cellulose (CMC), an anionic polymer, were used step-by-step to improve paper strength. The adsorption of cationic starch and CMC on cellulose fibers were analyzed via polyelectrolyte titration. The results showed that paper strength was enhanced slightly with a layer-by-layer assembly of the polymers. However, if the washing stage, which was required for layer-by-layer assembly, was eliminated, the starch/CMC complex was deposited on fibers more efficiently, and the paper strength was improved more significantly.

Probabilistic contact preferences in protein-ligand and protein-protein complexes

Modeller för intermolekulär växelvärkan utnyttjas brett inom biologin. Analys av kontakter mellan proteiner och läkemedelsforskning representerar typiska tillämpningsområden för dylika modeller. En modell som beskriver sådana molekylära växelverkningar kan utformas med hjälp av biofysisk teori, vilket tenderar att resultera i ytterst tung beräkningsbörda även för enkla tillämpningar. Ett alternativt sätt att formulera modeller är att utnyttja stora databaser som innehåller strukturmätningar gjorda med hjälp av till exempel röntgendiffraktion. Då man använder sig av empiriska mätdata direkt, möjliggör en statistisk modell att osäkerheten och inexaktheten i datat tas till hänsyn på ett adekvat sätt, samtidigt som beräkningsbördan håller sig på en rimligare nivå jämfört med kvantmekaniska metoder som i princip borde ge de optimala resultaten. I avhandlingen utvecklades en 3D modell för numerisk undersökning av intermolekulär växelverkan baserad på Bayesiansk statistik. Modellens syfte är att åstadkomma prognoser för det hurdana eller vilka molekylstrukturer prefereras i en given kontext, d.v.s. är mer sannolika inom ramen för interaktion. Modellen testades i essentiella molekyläromgivningar - en liten molekyl vid sin bindningsplats hos ett protein och en gränsyta mellan proteinerna i ett komplex. De erhållna numeriska resultaten motsvarar väl experimentella resultat som tidigare rapporterats i litteraturen, exempelvis kvalitativa bindningsaffiniteter och kemisk kännedom av vissa aminosyrors rumsliga förmågor att utgöra bindningar. I avhandlingen gjordes ytterligare preliminära tester av den statistiska ansatsen för modellering av den centrala molekylära strukturella anpassningsbarheten. I praktiken är den utvecklade modellen ämnad som ett led i en mer omfattande analysmetod, så som en s.k. farmakofor modell. Molekyylivuorovaikutusten mallintamista hyödynnetään laajasti biologisten kysymysten tarkastelussa. Tyypillisiä esimerkkejä sovelluskohteista ovat proteiinien väliset kontaktit ja lääkesuunnittelu. Vuorovaikutuksia kuvaavan mallin lähtökohta voi olla molekyyleihin liittyvä teoria, jolloin soveltamiseen liittyvä laskenta saattaa olla erityisen raskasta, tai suuri havaintojoukko joka on saatu aikaan esimerkiksi mittaamalla rakenteita röntgendiffraktio menetelmällä. Tilastollinen malli mahdollistaa havaintoaineistossa olevan epätarkkuuden ja epävarmuuden huomioimisen, samalla pitäen laskennallisen kuorman pienempänä verrattuna periaatteessa parhaan tuloksen antavaan kvanttimekaaniseen mallinnukseen. Väitöstyössä kehitettiin bayesiläiseen tilastotieteeseen perustuva 3D malli molekyylien välisten vuorovaikutusten laskennalliseen tarkasteluun. Mallin tehtävä on tuottaa ennusteita sen suhteen, minkä tai millaisten molekyylirakenteiden väliset kompleksit ovat etusijalla, toisin sanoen todennäköisempiä, vuorovaikutustilanteessa. Työssä kehitetyn menetelmän toimivuutta testattiin käyttötarkoituksen suhteen olennaisissa molekyyliympäristöissä - pieni molekyyli sitoutumiskohdassaan proteiinissa sekä rajapinta kahden proteiinin välilllä proteiinikompleksissa. Saadut laskennalliset tulokset vastasivat hyvin vertailuun käytettyjä kirjallisuudesta saatuja kokeellisia tuloksia, kuten laadullisia sitoutumisaffiniteetteja, sekä kemiallista tietoa esimerkiksi tiettyjen aminohappojen avaruudellisesta sidoksenmuodostuksesta. Väitöstyössä myös alustavasti testattiin tilastollista lähestymistapaa tärkeän molekyylien rakenteellisen mukautuvuuden mallintamiseen. Käytännössä malli on tarkoitettu osaksi jotakin laajempaa analyysimenetelmää, kuten farmakoforimallia.

Structural studies and in vivo characterisation of Oct4:PORE and Oct4/Sox2:UTF1 complexes

Monikykyiset kantasolut pystyvät erilaistumaan alkion kehityksen aikana miksi tahansa kehittyvän eläimen kudokseksi. Alkion kehitystä on tutkittu vuosikymmeniä ja ensimmäisen kerran kantasoluja viljeltiin 1980-luvulla. Noin vuosikymmen myöhemmin kloonattiin ensimmäinen nisäkäs, Dolly-lammas, mikä oli läpimurto perimän kloonauksessa. Vajaa kymmenen vuotta sitten japanilaiset tutkijat pystyivät ensimmäisen kerran tuottamaan indusoituja monikykyisiä kantasoluja. Nämä kantasolut tuotettiin ilmentämällä neljää geeniä, jotka uudelleenohjelmoivat erilaistuneet solut takaisin kantasoluiksi. Geenien ilmentymistä säätelevä ja DNA:han sitoutuvan proteiinin Oct4:n on todettu olevan tärkeä tekijä uudelleenohjelmissa. Oct4 kuuluu transkriptiotekijäperheeseen, joka säätelee geenien ilmentymistä kantasoluissa. Tässä työssä kiteytin Oct4-proteiinin sen kohde-DNA:n kanssa sekä tutkin sen sitoutumista ja atomitason rakennetta röntgensädekristallografian avulla. Tutkimuksessamme paljastui useita Oct4:n atomitason rakenteellisia ominaisuuksia, jotka selittävät sen säätelymekanismeja kantasoluissa.