Optimisation of maintenance expenditure for buildings : refurbish or demolish

With an increase in growing number of aging public building infrastructure globally, there is an opportunity for an efficient life care management rather then mere demolition and rebuild. By carefully implementing appropriate structural engineering practices with facility management, the whole of life cycle costs for public building assets can be optimised and public money can be saved and better utilised elsewhere. A need of decision support tool/methodology which can assist asset manager make better decision among demolish, refurbish, do nothing or rebuilt option for any typical building under consideration is growing in order to optimise maintenance funds. The paper is part of research project focusing on development of such methodology known as residual service life prediction. The paper is mainly focusing on following three major aspects of public building infrastructure; first, issues and challenges in optimisation of maintenance funds, second, residual service life prediction methodology and issues and challenges in the development of such methodology. The paper concludes with the authors’ observations and further research potentials

High quality indoor environments for office buildings

The quality of office indoor environments is considered to consist of those factors that impact the occupants according to their health and well-being and (by consequence) their productivity. Indoor Environment Quality (IEQ) can be characterized by four indicators: • Indoor air quality indicators • Thermal comfort indicators • Lighting indicators • Noise indicators. Within each indicator, there are specific metrics that can be utilized in determining an acceptable quality of an indoor environment based on existing knowledge and best practice. Examples of these metrics are: indoor air levels of pollutants or odorants; operative temperature and its control; radiant asymmetry; task lighting; glare; ambient noise. The way in which these metrics impact occupants is not fully understood, especially when multiple metrics may interact in their impacts. It can be estimated that the potential cost of lost productivity from poor IEQ may be much in excess of other operating costs of a building. However, the relative productivity impacts of each of the four indicators is largely unknown. The CRC Project ‘Regenerating Construction to Enhance Sustainability’ has a focus on IEQ impacts before and after building refurbishment. This paper provides an overview of IEQ impacts and criteria and the implementation of a CRC project that is currently researching these factors during the refurbishment of a Melbourne office building. IEQ measurements and their impacts will be reported in a future paper

High quality indoor environments for sustainable office buildings

The quality of office indoor environments is considered to consist of those factors that impact occupants according to their health and well-being and (by consequence) their productivity. Indoor Environment Quality (IEQ) can be characterized by four indicators: • Indoor air quality indicators • Thermal comfort indicators • Lighting indicators • Noise indicators. Within each indicator, there are specific metrics that can be utilized in determining an acceptable quality of an indoor environment based on existing knowledge and best practice. Examples of these metrics are: indoor air levels of pollutants or odorants; operative temperature and its control; radiant asymmetry; task lighting; glare; ambient noise. The way in which these metrics impact occupants is not fully understood, especially when multiple metrics may interact in their impacts. While the potential cost of lost productivity from poor IEQ has been estimated to exceed building operation costs, the level of impact and the relative significance of the above four indicators are largely unknown. However, they are key factors in the sustainable operation or refurbishment of office buildings. This paper presents a methodology for assessing indoor environment quality (IEQ) in office buildings, and indicators with related metrics for high performance and occupant comfort. These are intended for integration into the specification of sustainable office buildings as key factors to ensure a high degree of occupant habitability, without this being impaired by other sustainability factors. The assessment methodology was applied in a case study on IEQ in Australia’s first ‘six star’ sustainable office building, Council House 2 (CH2), located in the centre of Melbourne. The CH2 building was designed and built with specific focus on sustainability and the provision of a high quality indoor environment for occupants. Actual IEQ performance was assessed in this study by field assessment after construction and occupancy. For comparison, the methodology was applied to a 30 year old conventional building adjacent to CH2 which housed the same or similar occupants and activities. The impact of IEQ on occupant productivity will be reported in a separate future paper

Sustainable construction for the future - the role of government in energy efficiency and sustainability in buildings

This paper will summarise the findings from a study that explored the link between dwelling design, or type, and energy efficiencies in sub-tropical climates. An increasing number of government and private sector development companies are initiating projects that aim to deliver enhanced environmental outcomes at both sub-divisional and dwelling levels. The study used AccuRate, a new thermal modelling tool developed by CSIRO that responds to the need to improve ventilation modelling. The study found that dwellings developed in conjunction with the Departments of Housing and Public Works have set the benchmark. It provides a snapshot of the energy efficiency of a range of dwelling types found in recent subdivisions. However, the trend toward increasing urban densities may reduce the likelihood that cooling breezes will be available to cool dwellings. The findings are relevant to regulators, designers and industry in all states interested in reducing the energy used to cool dwellings in summer.

Integrating eco-efficiency assessment of commercial buildings into the design process : LCADesign

The ability to assess a commercial building for its impact on the environment at the earliest stage of design is a goal which is achievable by integrating several approaches into a single procedure directly from the 3D CAD representation. Such an approach enables building design professionals to make informed decisions on the environmental impact of building and its alternatives during the design development stage instead of at the post-design stage where options become limited. The indicators of interest are those which relate to consumption of resources and energy, contributions to pollution of air, water and soil, and impacts on the health and wellbeing of people in the built environment as a result of constructing and operating buildings. 3D object-oriented CAD files contain a wealth of building information which can be interrogated for details required for analysis of the performance of a design. The quantities of all components in the building can be automatically obtained from the 3D CAD objects and their constituent materials identified to calculate a complete list of the amounts of all building products such as concrete, steel, timber, plastic etc. When this information is combined with a life cycle inventory database, key internationally recognised environmental indicators can be estimated. Such a fully integrated tool known as LCADesign has been created for automated ecoefficiency assessment of commercial buildings direct from 3D CAD. This paper outlines the key features of LCADesign and its application to environmental assessment of commercial buildings.

LCADesign : an integrated approach to automatic eco-efficiency assessment of commercial buildings

Buildings consume resources and energy, contribute to pollution of our air, water and soil, impact the health and well-being of populations and constitute an important part of the built environment in which we live. The ability to assess their design with a view to reducing that impact automatically from their 3D CAD representations enables building design professionals to make informed decisions on the environmental impact of building structures. Contemporary 3D object-oriented CAD files contain a wealth of building information. LCADesign has been designed as a fully integrated approach for automated eco-efficiency assessment of commercial buildings direct from 3D CAD. LCADesign accesses the 3D CAD detail through Industry Foundation Classes (IFCs) - the international standard file format for defining architectural and constructional CAD graphic data as 3D real-world objects - to permit construction professionals to interrogate these intelligent drawing objects for analysis of the performance of a design. The automated take-off provides quantities of all building components whose specific production processes, logistics and raw material inputs, where necessary, are identified to calculate a complete list of quantities for all products such as concrete, steel, timber, plastic etc and combines this information with the life cycle inventory database, to estimate key internationally recognised environmental indicators such as CML, EPS and Eco-indicator 99. This paper outlines the key modules of LCADesign and their role in delivering an automated eco-efficiency assessment for commercial buildings.

A numerical method to quantify the axial shortening of vertical elements in concrete buildings

Differential axial shortening, distortion and deformation in high rise buildings is a serious concern. They are caused by three time dependent modes of volume change; “shrinkage”, “creep” and “elastic shortening” that takes place in every concrete element during and after construction. Vertical concrete components in a high rise building are sized and designed based on their strength demand to carry gravity and lateral loads. Therefore, columns and walls are sized, shaped and reinforced differently with varying concrete grades and volume to surface area ratios. These structural components may be subjected to the detrimental effects of differential axial shortening that escalates with increasing the height of buildings. This can have an adverse impact on other structural and non-structural elements. Limited procedures are available to quantify axial shortening, and the results obtained from them differ because each procedure is based on various assumptions and limited to few parameters. All these prompt to a need to develop an accurate numerical procedure to quantify the axial shortening of concrete buildings taking into account the important time varying functions of (i) construction sequence (ii) Young’s Modulus and (iii) creep and shrinkage models associated with reinforced concrete. General assumptions are refined to minimize variability of creep and shrinkage parameters to improve accuracy of the results. Finite element techniques are used in the procedure that employs time history analysis along with compression only elements to simulate staged construction behaviour. This paper presents such a procedure and illustrates it through an example. Keywords: Differential Axial Shortening, Concrete Buildings, Creep and Shrinkage, Construction Sequence, Finite Element Method.

Green a city grow a wall

As Brisbane grows, it is rapidly becoming akin to any other city in the world with its typical stark grey concrete buildings rather than being characterized by its subtropical element of abundant green vegetation. Living Walls can play a vital role in restoring the loss of this distinct local element of a subtropical city. This paper will start by giving an overview of the traditional methods of greening subtropical cities with the use of urban parks and street trees. Then, by examining a recent heat imaging map of Brisbane, the effect of green cover with the built environment will be shown. With this information from a macro level, this paper will proceed to examine a typical urban block within the Central Business District (CBD) to demonstrate urban densification in relation to greenery in the city. Then, this paper will introduce the new technology where Living Walls have the untapped potential of effectively greening a city where land is scarce and given over to high density development. Living Walls incorporated into building design does not only enhance the subtropical lifestyle that is being lost in modern cities but is also an effective means for addressing climate change. This paper will serve as a preliminary investigation into the effects of incorporating Living Walls into cities. By growing a Living Wall onto buildings, we can be part of an effective design solution for countering global warming and at the same time, Living Walls can return local character to subtropical cities, thereby greening the city as well.

Are library and information professionals ready for evidence based practice?

Evidence based practice (EBP) is recognised as a way of improving the quality of professional practice in many disciplines however its adoption within library and information sciences (LIS) has been gradual. The term was first introduced into the library and information profession‟s vocabulary a decade ago but an impediment to its uptake is the lack of clear understanding regarding how LIS practitioners understand the concept. Partridge, Thorpe, Edwards and Hallam (2007) identified the need to understand how LIS professionals experience or understand evidence based practice and proposed a model of four categories of experience to describe how LIS professionals experience EBP. This paper extends that framework by refining the different conceptions of evidence based practice and identifying relationships which exist between the categories of experience to provide a rich description of the EBP phenomenon. The paper also argues that the phrase “evidence based librarianship” and its variations be abandoned as practitioners do not see a distinction between EBP as applied to librarianship and information practice and industry specific jargon like “evidence based library and information practice”. This research will help current and future LIS practitioners, leaders and educators engage more actively in the establishment of an evidence based culture to improve library and information practice in Australia and internationally.

A constructivist approach to media literacy education: The role of the library

An informed citizenry is essential to the effective functioning of democracy. In most modern liberal democracies, citizens have traditionally looked to the media as the primary source of information about socio-political matters. In our increasingly mediated world, it is critical that audiences be able to effectively and accurately use the media to meet their information needs. Media literacy, the ability to access, understand, evaluate and create media content is therefore a vital skill for a healthy democracy. The past three decades have seen the rapid expansion of the information environment, particularly through Internet technologies. It is obvious that media usage patterns have changed dramatically as a result. Blogs and websites are now popular sources of news and information, and are for some sections of the population likely to be the first, and possibly only, information source accessed when information is required. What are the implications for media literacy in such a diverse and changing information environment? The Alexandria Manifesto stresses the link between libraries, a well informed citizenry and effective governance, so how do these changes impact on libraries? This paper considers the role libraries can play in developing media literate communities, and explores the ways in which traditional media literacy training may be expanded to better equip citizens for new media technologies. Drawing on original empirical research, this paper highlights a key shortcoming of existing media literacy approaches: that of overlooking the importance of needs identification as an initial step in media selection. Self-awareness of one’s actual information need is not automatic, as can be witnessed daily at reference desks in libraries the world over. Citizens very often do not know what it is that they need when it comes to information. Without this knowledge, selecting the most appropriate information source from the vast range available becomes an uncertain, possibly even random, enterprise. Incorporating reference interview-type training into media literacy education, whereby the individual will develop the skills to interrogate themselves regarding their underlying information needs, will enhance media literacy approaches. This increased focus on the needs of the individual will also push media literacy education into a more constructivist methodology. The paper also stresses the importance of media literacy training for adults. Media literacy education received in school or even university cannot be expected to retain its relevance over time in our rapidly evolving information environment. Further, constructivist teaching approaches highlight the importance of context to the learning process, thus it may be more effective to offer media literacy education relating to news media use to adults, whilst school-based approaches focus on types of media more relevant to young people, such as entertainment media. Librarians are ideally placed to offer such community-based media literacy education for adults. They already understand, through their training and practice of the reference interview, how to identify underlying information needs. Further, libraries are placed within community contexts, where the everyday practice of media literacy occurs. The Alexandria Manifesto stresses the link between libraries, a well informed citizenry and effective governance. It is clear that libraries have a role to play in fostering media literacy within their communities.

Library technician course recognition : meeting the challenge of a distributed national education program

This paper looks at the challenges presented for the Australian Library and Information Association by its role as the professional association responsible for ensuring the quality of Australian library technician graduates. There is a particular focus on the issue of course recognition, where the Association's role is complicated by the need to work alongside the national quality assurance processes that have been established by the relevant technical education authorities. The paper describes the history of course recognition in Australia; examines the relationship between course recognition and other quality measures; and describes the process the Association has undertaken recently to ensure appropriate professional scrutiny in a changing environment of accountability.

"I'm thinking 'bout moving in"... An examination of the issues impacting on the recruitment of secondary school graduates to the library and information profession

In recent years concern has been expressed internationally about the future of the library and information services (LIS) profession: recruitment and retention, changing skill sets and declining numbers of people choosing librarianship as a career are all factors contributing to an uncertain future. One area yet explored in any depth is the topic of why LIS studies are not perceived, let alone promoted, as a good first professional qualification for high school graduates. This paper considers the professional literature that examines the uptake of librarianship as a first qualification by school leavers and discusses, in the context of the Australian library sector, the role of professional associations, library schools, National and State Libraries, as well as individual libraries and librarians. Examples of best practice are presented to highlight the opportunities for inspiring and motivating students through well structured and stimulating work experience programs. The topic is relevant to all librarians who are interested in the future of the LIS profession. It is argued that the focus of the present conference on ‘moving up’ and ‘moving on’ can only have real significance when the profession has a more complete understanding of the barriers to and the opportunities for ‘moving in’.

Aligning policy with practice: an evaluation of vocational education and training in the library and information services sector

Vocational education and training for the library and information services (LIS) sector in Australia offers students the career pathway to become library technicians. Library technicians play a valuable role in drawing on sound practical knowledge and skills to support the delivery of library and information services that meet client needs. Over the past forty years, the Australian Library and Information Association (ALIA) has monitored the quality of library technician courses. Since 2005, ALIA has run national professional development days for library technician educators with the goal of establishing an alternative model for course recognition focusing on the process of peer review to benchmark good practice and stimulate continuous improvement in library technician education. This initial developmental work has culminated in 2009 with site visits to all library technician courses in Australia. The paper presents a whole-of-industry case study to critically review the work undertaken to date.

University library virtual reference services : best practices and continuous improvement

The inclusion or not of chat services within Virtual Reference (VR) is an important topic for university libraries. Increasingly, email supported by a Frequently Asked Questions (FAQ) database is suggested in the scholarly literature as the preferred, cost-effective means for providing university VR services. This paper examines these issues and identifies some best practices for university library VR services relating to chat and email service, collaborative service provision, services staffing, and staff training. Further studies are required to more completely identify best practices for the complete range of VR services.