883 resultados para Lamb - confinement
Resumo:
Relatório final de estágio do Mestrado em Ensino de Inglês e Francês ou Espanhol no Ensino Básico
Resumo:
Dissertação para obtenção do grau de mestre em Engenharia de Materiais
Resumo:
Resumo: Objetivou-se avaliar o efeito da idade ao abate e do uso ou não de suplementação na fase de cria sobre as relações de ácidos graxos da carne de ovinos. Foram utilizados 32 cordeiros Morada Nova, machos, não castrados, abatidos aos 60, 78, 106 e 134 dias, em grupos de 8 cordeiros por abate. Na carne avaliada foram identificados sete ácidos graxos saturados, cinco ácidos graxos monoinsaturados e cinco ácidos graxos poli-insaturados. O uso da suplementação na fase de cria (com Creep feeding) não alterou as relações entre ácidos graxos saturados e insaturados, bem como o percentual de ácidos graxos desejáveis (P>0,05) presentes na carne de cordeiros. A idade ao abate interferiu positiva e linearmente na relação entre ácidos graxos monoinsaturados e insaturados, o que permite abater os cordeiros com até 134 dias sem prejuízo para as relações entre os ácidos graxos [Effect of age at slaughter and use of supplementation on the ratio of fatty acids of meat from lambs of Morada Nova race]. Abstract: This study aimed to evaluate the effect of age at slaughter and the use or not supplementation in creating phase on the relationship of fatty acids of sheep meat. 32 Morada Nova lambs were used, male, not castrated, slaughtered at 60, 78, 106 and 134 days, 8 lambs for slaughter groups. In evaluated meat were identified seven saturated fatty acids, monounsaturated fatty acids and five polyunsaturated fatty acids. The use of supplementation in the creation phase (with Creep feeding) did not alter the relationship between saturated and unsaturated fatty acids, as well as the percentage of desirable fatty acids (P>0,05) in the lamb meat. The age at slaughter interfered positively and linearly in the relationship between monounsaturated and unsaturated fatty acids, which allows slaughter lambs up to 134 days without prejudice to the relationship between fatty acids
Resumo:
The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.
Resumo:
The quasi two-dimensional electron gas (q2DEG) hosted in the interface of an epitaxially grown lanthanum aluminate (LaAlO3) thin film with a TiO2-termi-nated strontium titanate (SrTiO3) substrate (001) has been massively studied in the last few years. The confinement of mobile electrons to within a few nanome-ters from the interface, superconductive behavior at low temperatures and elec-tron mobility exceeding 1000 cm2/(V.s) make this system an interesting candi-date to explore the physics of spin injection and transport. However, due to the critical thickness for conduction of 4 unit cells (uc) of LaAlO3, a high tunneling resistance hampers electrical access to the q2DEG, preventing proper injection of spin polarized current. Recently, our group found that depositing a thin overlayer of Co on LaAlO3 reduces the critical thickness, enabling conduction with only 1 uc of LaAlO3. Two scenarios arise to explain this phenomenon: a pinning of the Fermi level in the metal, inducing charge transfer in the SrTiO3; the creation of oxygen vacancies at the interface between LaAlO3 and the metal, leading to an n-type doping of the SrTiO3. In this dissertation, we will report on magnetotransport of metal/LaAlO3/SrTiO3 (metal: Ti, Ta, Co, Py, Au, Pt, Pd) heterostructures with 2 uc of LaAlO3 studied at low temperatures (2 K) and high magnetic fields (9 T). We have analyzed the transport properties of the gas, namely, the carrier concen-tration, mobility and magnetotransport regime and we will discuss the results in the light of the two scenarios mentioned above.
Resumo:
PURPOSE: In previous papers, we described a new experimental model of congenital diaphragmatic hernia in rabbits, and we also reported noninvasive therapeutic strategies for prevention of the functional and structural immaturity of the lungs associated with this defect. In addition to lung hypoplasia, pulmonary hypertension, biochemical, and structural immaturity of the lungs, the hemodynamics of infants and animals with congenital diaphragmatic hernia are markedly altered. Hence, cardiac hypoplasia has been implicated as a possible cause of death in patients with congenital diaphragmatic hernia, and it is hypothesized to be a probable consequence of fetal mediastinal compression by the herniated viscera. Cardiac hypoplasia has also been reported in lamb and rat models of congenital diaphragmatic hernia. The purpose of the present experiment was to verify the occurrence of heart hypoplasia in our new model of surgically produced congenital diaphragmatic hernia in fetal rabbits. METHODS: Twelve pregnant New Zealand rabbits underwent surgery on gestational day 24 or 25 (normal full gestational time - 31 to 32 days) to create left-sided diaphragmatic hernias in 1 or 2 fetuses per each doe. On gestational day 30, all does again underwent surgery, and the delivered fetuses were weighed and divided into 2 groups: control (non-surgically treated fetuses) (n = 12) and congenital diaphragmatic hernia (n = 9). The hearts were collected, weighed, and submitted for histologic and histomorphometric studies. RESULTS: During necropsy, it was noted that in all congenital diaphragmatic hernia fetuses, the left lobe of the liver herniated throughout the surgically created defect and occupied the left side of the thorax, with the deviation of the heart to the right side, compressing the left lung; consequently, this lung was smaller than the right one. The body weights of the animals were not altered by congenital diaphragmatic hernia, but heart weights were decreased in comparison to control fetuses. The histomorphometric analysis demonstrated that congenital diaphragmatic hernia promoted a significant decrease in the ventricular wall thickness and an increase in the interventricular septum thickness. CONCLUSION: Heart hypoplasia occurs in a rabbit experimental model of congenital diaphragmatic hernia. This model may be utilized for investigations in therapeutic strategies that aim towards the prevention or the treatment of heart hypoplasia caused by congenital diaphragmatic hernia.
Resumo:
Foram estudadas as características tecnológica das madeiras e das polpas kraft de cinco espécies da damília Moraceae, nativas da Amazônia, Brasimum parinarioidesDukhe (amapá), Pourouma longipendula Dukhe (embaubarana), Clarisia racemosa R.&P. (guariúba), Helycostylis tomentosa Rubby (inharé), Brasimum rubescens Taub. (muirapiranga) e das espécies exóticas Anthocephalus chinenses (Lamb). Rich, Eucalyptus degluptaBlume e Gmelina arborea Roxb. Foram determinadas as características dendrométricas, químicas e as densidades básicas das madeiras. Estudos de deslignificação demonstraram que as espécies inharé e muirapiranga foram mais difíceis de serem deslignificadas. As polpas foram branqueadas pelas sequências CEDED, CEHDED e C/DEDED. Os maiores consumos de reagentes químicos nos branqueamentos foram verificados para as polpas com teores de lignina residual mais elevados. Os melhores valores para comprimento de auto-ruptura, alongamenteo e arrebentamento foram obtidos pelas polpas não branqueadas oriundas das espécies exóticas. As polpas das espécies amapá, guariúba, e inharé acrescentaram valores mais elevados para resistência ao rasgo.
Resumo:
The vulnerability of the masonry envelop under blast loading is considered critical due to the risk of loss of lives. The behaviour of masonry infill walls subjected to dynamic out-of-plane loading was experimentally investigated in this work. Using confined underwater blast wave generators (WBWG), applying the extremely high rate conversion of the explosive detonation energy into the kinetic energy of a thick water confinement, allowed a surface area distribution avoiding also the generation of high velocity fragments and reducing atmospheric sound wave. In the present study, water plastic containers, having in its centre a detonator inside a cylindrical explosive charge, were used in unreinforced masonry infills panels with 1.7m by 3.5m. Besides the usage of pressure and displacement transducers, pictures with high-speed video cameras were recorded to enable processing of the deflections and identification of failure modes. Additional numerical studies were performed in both unreinforced and reinforced walls. Bed joint reinforcement and grid reinforcement were used to strengthen the infill walls, and the results are presented and compared, allowing to obtain pressure-impulse diagrams for design of masonry infill walls.
Resumo:
This paper aims to evaluate experimentally the potentialities of Hybrid Composite Plates (HCPs) technique for the shear strengthening of reinforced concrete (RC) beams that were previously subjected to intense damage in shear. HCP is a thin plate of Strain Hardening Cementitious Composite (SHCC) reinforced with Carbon Fiber Reinforced Polymer (CFRP) laminates. For this purpose, an experimental program composed of two series of beams (rectangular and T cross section) was executed to assess the strengthening efficiency of this technique. In the first step of this experimental program, the control beams, without steel stirrups, were loaded up to their shear failure, and fully unloaded. Then, these pre-damaged beams were shear strengthened by applying HCPs to their lateral faces by using a combination of epoxy adhesive and mechanical anchors. The bolts were applied with a certain torque in order to increase the concrete confinement. The obtained results showed that the increase of load carrying capacity of the damaged strengthened beams when HCPs were applied with epoxy adhesive and mechanical anchors was 2 and 2.5 times of the load carrying capacity of the corresponding reference beams (without HCPs) for the rectangular and T cross section beam series, respectively. To further explore the potentialities of the HCPs technique for the shear strengthening, the experimental tests were simulated using an advanced numerical model by a FEM-based computer program. After demonstration the good predictive performance of the numerical model, a parametric study was executed to highlight the influence of SHCC as an alternative for mortar, as well as the influence of torque level applied to the mechanical anchors, on the load carrying capacity of beams strengthened with the proposed technique.
Resumo:
Tese de Doutoramento em Engenharia Civil
Resumo:
Polymer blends based on poly(vinylidene fluoride), PVDF and poly(ethylene oxide), PEO, with varying compositions have been prepared by solvent casting, the polymer blend films being obtained from solutions in dimethyl formamide at 70ºC. Under these conditions PVDF crystallizes from solution while PEO remains in the molten state. Then, PEO crystallizes from the melt confined by PVDF crystalls during cooling to room temperature. PVDF crystallized from DMF solutions adopt predominantly the electroactive β-phase (85%). Nevertheless when PEO is introduced in the polymer blend the β-phase content decreases slightly to 70%. The piezoelectric coefficient (d33) in pristine PVDF is -5 pC/N and decreases with increasing PEO content in the PVDF/PEO blends. Blend morphology, observed by electron and atomic force microscopy, shows the confinement of PEO between the already formed PVDF crystals. On the other hand the sample contraction when PEO is extracted from the blend with water (which is not a solvent for PVDF) allows proving the co-continuity of both phases in the blend. PEO crystallization kinetics have been characterized by DSC both in isothermal and cooling scans experiments showing important differences in crystalline fraction and crystallization rate with sample composition.
Resumo:
The exceptional properties of localised surface plasmons (LSPs), such as local field enhancement and confinement effects, resonant behavior, make them ideal candidates to control the emission of luminescent nanoparticles. In the present work, we investigated the LSP effect on the steady-state and time-resolved emission properties of quantum dots (QDs) by organizing the dots into self-assembled dendrite structures deposited on plasmonic nanostructures. Self-assembled structures consisting of water-soluble CdTe mono-size QDs, were developed on the surface of co-sputtered TiO2 thin films doped with Au nanoparticles (NPs) annealed at different temperatures. Their steady-state fluorescence properties were probed by scanning the spatially resolved emission spectra and the energy transfer processes were investigated by the fluorescence lifetime imaging (FLIM) microscopy. Our results indicate that a resonant coupling between excitons confined in QDs and LSPs in Au NPs located beneath the self-assembled structure indeed takes place and results in (i) a shift of the ground state luminescence towards higher energies and onset of emission from excited states in QDs, and (ii) a decrease of the ground state exciton lifetime (fluorescence quenching).
Resumo:
Adding Omega fatty acids (ω) 3 to the diet of stud bucks, the quality of sperm and their resistance to cryopreservation could increase. The aim of this study is to determine the effect of supplementation with ω3 on the metabolic state, sperm quality and resistance to freezing, in bucks kept in confinement under natural photoperiod. The experiment will be conducted in the facilities of the Faculty of Agronomy and Veterinary, UNRC (National University of Río Cuarto). Ten Anglo Nubian adult bucks, trained for semen collection with artificial vagina will be used. Males will be randomly allocated into 2 groups (5 animals each): control (C) and treatment (T). During the breeding season, group C will be fed with a ration of alfalfa and ground corn, according to the requirements for each category and sex (NRC, 2007). Group T will receive the same diet with the addition of linseeds. Both will have free access to water. Every week, semen of each buck, will be collected, evaluated and frozen. Sperm quality “in vitro” after thawing will be studied with a digital image analyzer. To assess oxidative stress in fresh and cryopreserved semen, levels of thiobarbituric acid reactive substances (TBARS) and quantification of the activity of superoxide dismutase (SOD) and catalase (CAT) will be determined. To establish the metabolic state, blood samples will be collected every two weeks. The statistical analysis will include an exploratory data analysis, multivariate analysis of multiple correspondences on a completely randomized design, analysis of variance and Fisher post-test. The level of significance will be set at P <0.05 and all results will be expressed as means ± SEM.
Resumo:
Foram estudados os efeitos alelopáticos produzidos por cinco espécies vegetais: as gramíneas Avena sativa L., e Lolium multiflorum Lamb.; e as leguminosas Vicia sp., Mediaago sativa L. e Trifolium repens L. Canteiros isolados foram preparados, adubados e semeados de acordo com as recomendações técnicas usuais. Nos resultados obtidos observou-se alta incidência de invasoras nos canteiros de Trifolium repens L. e Medicago sativa L., contrastando com os canteiros de Avena sativa L. e Lolium multiflorum Lamb., onde poucas foram as espécies encontradas; enquanto o canteiro de Vicia sp. manteve posição intermediária. Com base nos dados obtidos, pode-se recomendar as duas gramíneas como cultura de cobertura com propriedades alelopáticas, assim como a Vicia sp. quando desejar-se além da redução das plantas invasoras, matéria orgânica para incorporação.