Relationship between renal resistance index and renal function in liver transplant recipients after cessation of calcineurin inhibitor

End stage renal disease is a major complication after orthotopic liver transplantation (OLT). Vasoconstriction of renal arterial vessels because of calcineurin inhibitor (CNI) treatment plays a pivotal role in the development of renal insufficiency following OLT. Renal resistance can be measured non-invasively by determining the resistance index (RI) of segmental arteries by color-coded duplex ultrasonography, a measure with predictive value for future renal failure. Sixteen OLT patients on long-term CNI therapy were recruited prospectively and randomly assigned either to receive the m-TOR inhibitor sirolimus (SRL) or to continue on CNI treatment, and were followed for one yr. Serum creatinine (crea) declined after conversion to SRL, whereas it tended to increase in patients remaining on CNI (meanDelta crea SRL: -27, -18, -18, -15 micromol/L; meanDelta crea CNI: 4, 5, 8, 11 micromol/L at 1, 3, 6, 12 months, p = 0.02). RI improved after switching to SRL and was lower on SRL than on CNI (meanDeltaRI SRL: -0.04, -0.04, -0.03, -0.03; meanDeltaRI CNI: -0.006, 0.004, -0.007, -0.01 after 1, 3, 6, 12 months, p = 0.016). Individual changes of RI correlated significantly with individual changes of crea (r = 0.54, p < 0.001). Conversion from CNI to SRL can ameliorate renal function accompanied by a reduction of intrarenal RI after OLT.

Entwicklung eines Dispositionsleitstandes zur Bestimmung optimaler Torbelegungen in Stückgutspeditionsanlagen

Im operativen Betrieb einer Stückgutspeditionsanlage entscheidet der Betriebslenker bzw. der Disponent in einem ersten Schritt darüber, an welche Tore die Fahrzeuge zur Be- und Entladung andocken sollen. Darüber hinaus muss er für jede Tour ein Zeitfenster ausweisen innerhalb dessen sie das jeweilige Tor belegt. Durch die örtliche und zeitliche Fahrzeug-Tor-Zuordnung wird der für den innerbetrieblichen Umschlagprozess erforderliche Ressourcenaufwand in Form von zu fahrenden Wegstrecken oder aber Gabelstaplerstunden bestimmt. Ein Ziel der Planungsaufgabe ist somit, die Zuordnung der Fahrzeuge an die Tore so vorzunehmen, dass dabei minimale innerbetriebliche Wegstrecken entstehen. Dies führt zu einer minimalen Anzahl an benötigten Umschlagmittelressourcen. Darüber hinaus kann es aber auch zweckmäßig sein, die Fahrzeuge möglichst früh an die Tore anzudocken. Jede Tour verfügt über einen individuellen Fahrplan, der Auskunft über den Ankunftszeitpunkt sowie den Abfahrtszeitpunkt der jeweiligen Tour von der Anlage gibt. Nur innerhalb dieses Zeitfensters darf der Disponent die Tour einem der Tore zuweisen. Geschieht die Zuweisung nicht sofort nach Ankunft in der Anlage, so muss das Fahrzeug auf einer Parkfläche warten. Eine Minimierung der Wartezeiten ist wünschenswert, damit das Gelände der Anlage möglichst nicht durch zuviele Fahrzeuge gleichzeitig belastet wird. Es kann vor allem aber auch im Hinblick auf das Reservieren der Tore für zeitkritische Touren sinnvoll sein, Fahrzeuge möglichst früh abzufertigen. Am Lehrstuhl Verkehrssysteme und -logistik (VSL) der Universität Dortmund wurde die Entscheidungssituation im Rahmen eines Forschungsprojekts bei der Stiftung Industrieforschung in Anlehnung an ein zeitdiskretes Mehrgüterflussproblem mit unsplittable flow Bedingungen modelliert. Die beiden Zielsetzungen wurden dabei in einer eindimensionalen Zielfunktion integriert. Das resultierende Mixed Integer Linear Programm (MILP) wurde programmiert und für mittlere Szenarien durch Eingabe in den Optimization Solver CPlex mit dem dort implementierten exakten Branch-and-Cut Verfahren gelöst. Parallel wurde im Rahmen einer Kooperation zwischen dem Lehrstuhl VSL und dem Unternehmen hafa Docking Systems, einem der weltweit führenden Tor und Rampenhersteller, für die gleiche Planungsaufgabe ein heuristisches Scheduling Verfahren sowie ein Dispositionsleitstand namens LoadDock Navigation entwickelt. Der Dispositionsleitstand dient der optimalen Steuerung der Torbelegungen in logistischen Anlagen. In dem Leitstand wird planerische Intelligenz in Form des heuristischen Schedulingverfahrens, technische Neuerungen in der Rampentechnik in Form von Sensoren und das Expertenwissen des Disponenten in einem Tool verbunden. Das mathematische Modell sowie der Prototyp mit der integrierten Heuristik werden im Rahmen dieses Artikels vorgestellt.

Gesture-Based, Touch-Free Multi-User Gaming on Wall-Sized, High-Resolution Tiled Displays

Having to carry input devices can be inconvenient when interacting with wall-sized, high-resolution tiled displays. Such displays are typically driven by a cluster of computers. Running existing games on a cluster is non-trivial, and the performance attained using software solutions like Chromium is not good enough. This paper presents a touch-free, multi-user, humancomputer interface for wall-sized displays that enables completely device-free interaction. The interface is built using 16 cameras and a cluster of computers, and is integrated with the games Quake 3 Arena (Q3A) and Homeworld. The two games were parallelized using two different approaches in order to run on a 7x4 tile, 21 megapixel display wall with good performance. The touch-free interface enables interaction with a latency of 116 ms, where 81 ms are due to the camera hardware. The rendering performance of the games is compared to their sequential counterparts running on the display wall using Chromium. Parallel Q3A’s framerate is an order of magnitude higher compared to using Chromium. The parallel version of Homeworld performed on par with the sequential, which did not run at all using Chromium. Informal use of the touch-free interface indicates that it works better for controlling Q3A than Homeworld.

Comparison of iron isotope variations in modern and Ordovician siliceous Fe oxyhydroxide deposits

Formation pathways of ancient siliceous iron formations and related Fe isotopic fractionation are still not completely understood. Investigating these processes, however, is difficult as good modern analogues to ancient iron formations are scarce. Modern siliceous Fe oxyhydroxide deposits are found at marine hydrothermal vent sites, where they precipitate from diffuse, low temperature fluids along faults and fissures on the seafloor. These deposits exhibit textural and chemical features that are similar to some Phanerozoic iron formations, raising the question as to whether the latter could have precipitated from diffuse hydrothermal fluids rather than from hydrothermal plumes. In this study, we present the first data on modern Fe oxyhydroxide deposits from the Jan Mayen hydrothermal vent fields, Norwegian-Greenland Sea. The samples we investigated exhibited very low δ56Fe values between -2.09‰ and -0.66‰. Due to various degrees of partial oxidation, the Fe oxyhydroxides are with one exception either indistinguishable from low-temperature hydrothermal fluids from which they precipitated (-1.84‰ and -1.53‰ in δ56Fe) or are enriched in the heavy Fe isotopes. In addition, we investigated Fe isotope variations in Ordovician jasper beds from the Løkken ophiolite complex, Norway, which have been interpreted to represent diagenetic products of siliceous ferrihydrite precursors that precipitated in a hydrothermal plume, in order to compare different formation pathways of Fe oxyhydroxide deposits. Iron isotopes in the jasper samples have higher δ56Fe values (-0.38‰ to +0.89‰) relative to modern, high-temperature hydrothermal vent fluids (ca. -0.40‰ on average), supporting the fallout model. However, formation of the Ordovician jaspers by diffuse venting cannot be excluded, due to lithological differences of the subsurface of the two investigated vent systems. Our study shows that reliable interpretation of Fe isotope variations in modern and ancient marine Fe oxyhydroxide deposits depends on comprehensive knowledge of the geological context. Furthermore, we demonstrate that very negative δ56Fe values in such samples might not be the result of microbial dissimilatory iron reduction, but could be caused instead by inorganic reactions.

Psychotische Störungen im DSM-5

This article provides an overview of the main changes in the chapter "Schizophrenia Spectrum and Other Psychotic Disorders" from DSM-IV-TR to DSM-5, which, once again, does not make allowance for potential characteristics of children and adolescents. Changes in the main text include abandoning the classical subtypes of Schizophrenia as well as of the special significance of Schneider's first-rank symptoms, resulting in the general requirement of two key features (one having to be a positive symptom) in the definition of Schizophrenia and the allowance for bizarre contents in Delusional Disorders. Further introduced are the diagnosis of a delusional obsessive-compulsive/body dysmorphic disorder exclusively as Obsessive-Compulsive Disorder, the specification of affective episodes in Schizoaffective Disorder, and the formulation of a distinct subchapter "Catatonia" for the assessment of catatonic features in the context of several disorders. In Section III (Emerging Measures and Models) there is a recommendation for a dimensional description of psychoses. A likely source of confusion lies in the double introduction of an "Attenuated Psychosis Syndrome." On the one hand, a vague description is provided among "Other Specified Schizophrenia Spectrum and Other Psychotic Disorders" in the main text; on the other hand, there is a precise definition in Section III as a "Condition for Further Study." There is some cause to worry that this vague introduction of the attenuated psychosis syndrome in the main text might indeed open the floodgates to an overdiagnosis of subthreshold psychotic symptoms and their early pharmacological treatment.

Experimental, theoretical and numerical investigation of the nonlinear micromechanical properties of bone

Aging societies suffer from an increasing incidence of bone fractures. Bone strength depends on the amount of mineral measured by clinical densitometry, but also on the micromechanical properties of the bone hierarchical organization. A good understanding has been reached for elastic properties on several length scales, but up to now there is a lack of reliable postyield data on the lower length scales. In order to be able to describe the behavior of bone at the microscale, an anisotropic elastic-viscoplastic damage model was developed using an eccentric generalized Hill criterion and nonlinear isotropic hardening. The model was implemented as a user subroutine in Abaqus and verified using single element tests. A FE simulation of microindentation in lamellar bone was finally performed show-ing that the new constitutive model can capture the main characteristics of the indentation response of bone. As the generalized Hill criterion is limited to elliptical and cylindrical yield surfaces and the correct shape for bone is not known, a new yield surface was developed that takes any convex quadratic shape. The main advantage is that in the case of material identification the shape of the yield surface does not have to be anticipated but a minimization results in the optimal shape among all convex quadrics. The generality of the formulation was demonstrated by showing its degeneration to classical yield surfaces. Also, existing yield criteria for bone at multiple length scales were converted to the quadric formulation. Then, a computational study to determine the influence of yield surface shape and damage on the in-dentation response of bone using spherical and conical tips was performed. The constitutive model was adapted to the quadric criterion and yield surface shape and critical damage were varied. They were shown to have a major impact on the indentation curves. Their influence on indentation modulus, hardness, their ratio as well as the elastic to total work ratio were found to be very well described by multilinear regressions for both tip shapes. For conical tips, indentation depth was not a significant fac-tor, while for spherical tips damage was insignificant. All inverse methods based on microindentation suffer from a lack of uniqueness of the found material properties in the case of nonlinear material behavior. Therefore, monotonic and cyclic micropillar com-pression tests in a scanning electron microscope allowing a straightforward interpretation comple-mented by microindentation and macroscopic uniaxial compression tests were performed on dry ovine bone to identify modulus, yield stress, plastic deformation, damage accumulation and failure mecha-nisms. While the elastic properties were highly consistent, the postyield deformation and failure mech-anisms differed between the two length scales. A majority of the micropillars showed a ductile behavior with strain hardening until failure by localization in a slip plane, while the macroscopic samples failed in a quasi-brittle fashion with microcracks coalescing into macroscopic failure surfaces. In agreement with a proposed rheological model, these experiments illustrate a transition from a ductile mechanical behavior of bone at the microscale to a quasi-brittle response driven by the growth of preexisting cracks along interfaces or in the vicinity of pores at the macroscale. Subsequently, a study was undertaken to quantify the topological variability of indentations in bone and examine its relationship with mechanical properties. Indentations were performed in dry human and ovine bone in axial and transverse directions and their topography measured by AFM. Statistical shape modeling of the residual imprint allowed to define a mean shape and describe the variability with 21 principal components related to imprint depth, surface curvature and roughness. The indentation profile of bone was highly consistent and free of any pile up. A few of the topological parameters, in particular depth, showed significant correlations to variations in mechanical properties, but the cor-relations were not very strong or consistent. We could thus verify that bone is rather homogeneous in its micromechanical properties and that indentation results are not strongly influenced by small de-viations from the ideal case. As the uniaxial properties measured by micropillar compression are in conflict with the current literature on bone indentation, another dissipative mechanism has to be present. The elastic-viscoplastic damage model was therefore extended to viscoelasticity. The viscoelastic properties were identified from macroscopic experiments, while the quasistatic postelastic properties were extracted from micropillar data. It was found that viscoelasticity governed by macroscale properties has very little influence on the indentation curve and results in a clear underestimation of the creep deformation. Adding viscoplasticity leads to increased creep, but hardness is still highly overestimated. It was possible to obtain a reasonable fit with experimental indentation curves for both Berkovich and spherical indenta-tion when abandoning the assumption of shear strength being governed by an isotropy condition. These results remain to be verified by independent tests probing the micromechanical strength prop-erties in tension and shear. In conclusion, in this thesis several tools were developed to describe the complex behavior of bone on the microscale and experiments were performed to identify its material properties. Micropillar com-pression highlighted a size effect in bone due to the presence of preexisting cracks and pores or inter-faces like cement lines. It was possible to get a reasonable fit between experimental indentation curves using different tips and simulations using the constitutive model and uniaxial properties measured by micropillar compression. Additional experimental work is necessary to identify the exact nature of the size effect and the mechanical role of interfaces in bone. Deciphering the micromechanical behavior of lamellar bone and its evolution with age, disease and treatment and its failure mechanisms on several length scales will help preventing fractures in the elderly in the future.

Lied - Es ritten fünf Reiter zum Thore hinaus : Ade! Ade! Ade! ; etc. etc.

Bibliograph. Nachweis: Wolf, Sylvia: Politische Karikaturen in Deutschland 1848/49. Mittenwald 1982. – I.49 Nr. 16

Die Vormauer Italiens. Zur kulturellen Repräsentation eines konfessionellen Grenzraums (17. und 18. Jahrhundert)

Im Spätherbst 1583 visitierte der Mailänder Erzbischof Carlo Borromeo trotz ausdrücklichem Verbot der Drei Bünde die südlichen Täler Graubündens. 1620 fielen spanische Truppen ins Veltlin ein, um die katholischen Untertanen im Kampf gegen ihre mehrheitlich protestantischen Herren aus Graubünden zu unterstützen. Kirchliche wie weltliche Akteure rechtfertigten ihr Eingreifen mit der konfessionellen Grenzsituation. Der Graubündner Alpenraum bilde eine «Vormauer Italiens» resp. das «Tor zu Italien», die es gegen die Protestanten zu verteidigen gelte. Sei dieser gemischtkonfessionelle Grenzraum (2/3 Protestanten; 1/3 Katholiken) einmal in die Hände der «Häretiker» gefallen, könne sich der Protestantismus ungehindert in ganz Italien ausbreiten. Dass die Denkfigur der konfessionellen Grenze handlungsanleitend und handlungslegitimierend wirkte, haben Untersuchungen zur Ereignisgeschichte und zur politischen Sprache ausführlich belegt. Weniger bekannt ist, dass sie sich tief einschrieb in die kulturelle und religiöse Praxis der Katholiken. Der Beitrag zeigt auf, wie sich im Verlaufe des 17. Jahrhunderts ein Set an kulturellen Repräsentationen ausbildete, das auf subtile Weise die konfessionelle Grenze anzeigte und sie längerfristig festigte. Festgestellt werden kann zunächst, dass in Graubünden und im Veltlin unter den Auspizien der römischen Missionskongregation de Propaganda Fide eine reiche Sakrallandschaft entstanden ist und die vielen Kirchen, Kapellen, Kreuzwege, Bildstöcke etc. die katholischen Gebiete ostentativ gegen die protestantischen Nachbarn abgrenzten. Volkskundliche Erhebungen haben sodann auf eine aussergewöhnlich hohe Zahl von Kirchen und Kapellen aufmerksam gemacht, in denen um eine Gnade gebeten oder mit Votivgaben für ein erfahrenes Wunder gedankt wurde. Das dichte Netz dieser Gnadenorte und die damit verbundenen Frömmigkeitspraktiken – so die These des Beitrages – waren Teil einer katholischen Symbolpolitik, die darauf ausgerichtet war, die katholischen Gebiete im konfessionellen Grenzraum augenfällig in das Gnadenterritorium der katholischen Kirche zu integrieren. Denn dort, wo sich Wunder ereigneten, war dies ein klarer Beweis für die gottgewollte Zugehörigkeit zur katholischen Universalkirche. Ebenfalls der Konsolidierung der konfessionellen Grenze dienten drittens die zahlreichen Bruderschaften, die über ihre Erzbruderschaften in Rom oder Mailand sowohl auf der institutionellen wie auch auf der symbolischen Ebene für eine stärkere Anbindung an das katholische Italien sorgten.

Sēfer šaʿar Efrayim : rā'û dāvār ḥādāš ...

Efrayim Rayšer ... de q"q Werṭheim ... ḥibbēr nā'e ʿal 3 mizmôrîm še-bi-thillîm

Sēfer šaʿar Šimʿôn : hōʿotāq mis-sēfer ha-ḥayyîm ... le-Šimʿôn Franqfurṭ

Mōše Franqfurṭ

[Šaʿar hat-tešûvā]

Übers. d. Hauptsacht.: Das Tor der Umkehr

Sēfer šaʿar Efrayim

še-ḥibbēr ... Efrayim Werṭhaym B.-Naftālî Lēwî