Peripheral giant cell granuloma. An immunohistochemical and ultrastructural study.

OBJECTIVE: To study the nature of multinucleated and mononuclear cells from peripheral giant cell granuloma (PGCG). MATERIALS AND METHODS: Formalin-fixed, paraffin-embedded sections of 40 cases of PGCG were immunohistochemically stained for vimentin, alpha I-antichymotrypsin, CD68, S-100 protein, lysozyme, leucocyte common antigen (LCA), factor VIII-related antigen and muscle cell actin. Six cases of PGCG were also studied by transmission electron microscopy. RESULTS: Vimentin, alpha I-antichymotrypsin and CD68 were expressed in both the mononuclear and multinucleated giant cells. Dendritic mononuclear cells, positive for S-100 protein, were noted in 67.5% of the lesions, whereas lysozyme and leucocyte common antigen were detected in occasional mononuclear cells. Ultrastructural examination showed mononuclear cells with signs of phagocytosis and sometimes interdigitations with similar cells. Others presented non-specific characteristics and the third type exhibited cytoplasmic processes and occasional Birbeck granules. Some multinucleated giant cells showed oval nuclei, abundant mitochondria and granular endoplasmic reticulum whereas others presented with irregular nuclei and a great number of cytoplasmic vacuoles. CONCLUSIONS: Immunohistochemical and ultrastructural results suggest that PGCGs of the jaws are composed mainly of cells of the mononuclear phagocyte system and that Langerhans cells are present in two thirds of the lesions.

Efeito do lisinopril sobre parametros cardiacos e mortalidade no infarto experimental em ratos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of light curing source on microhardness of composite resins of different shades

Introduction: The evolution of light curing units can be noticed by the different systems recently introduced. The technology of LED units promises longer lifetime, without heating and with production of specific light for activation of camphorquinone. However, further studies are still required to check the real curing effectiveness of these units. Purpose: This study evaluated the microhardness of 4 shades (B-0.5, B-1, B-2 and B-3) of composite resin Filtek Z-250 (3M ESPE) after light curing with 4 light sources, being one halogen (Ultralux - Dabi Atlante) and three LED (Ultraled - Dabi Atlante, Ultrablue - DMC and Elipar Freelight - 3M ESPE). Methods: 192 specimens were distributed into 16 groups, and materials were inserted in a single increment in cylindrical templates measuring 4mm x 4mm and light cured as recommended by the manufacturer. Then, they were submitted to microhardness test on the top and bottom aspects of the cylinders. Results: The hardness values achieved were submitted to analysis of variance and to Tukey test at 5% confidence level. It was observed that microhardness of specimens varied according to the shade of the material and light sources employed. The LED appliance emitting greater light intensity provided the highest hardness values with shade B-0.5, allowing the best curing. On the other hand, appliances with low light intensity were the least effective. It was also observed that the bottom of specimens was more sensitive to changes in shade. Conclusion: Light intensity of LED light curing units is fundamental for their good functioning, especially when applied in resins with darker shades.

Study of DNA damage induced by dental bleaching agents in vitro

Dental bleaching is a simple and conservative procedure for aesthetic restoration of vital and non-vital discolored teeth. Nevertheless, a number of studies have demonstrated the risk of tissue damage from the contact of these agents with the oral mucosa. In the current study, the genotoxic potential associated with exposure to dental bleaching agents was assessed by the single cell gel (comet) assay in vitro. Chinese hamster ovary (CHO) cells in vitro were exposed to six commercial dental bleaching agents (Clarigel Gold - Dentsply; Whitespeed - Discus Dental; Nite White - Discus Dental; Magic Bleaching - Vigodent; Whiteness HP - FGM and Lase Peroxide - DMC). The results pointed out that all dental bleaching agents tested contributed to DNA damage as depicted by the mean tail moment, being the strongest effect observed with the highest dose of hydrogen peroxide (Whiteness HP and Lase peroxide, at a 35% concentration). On the other hand, Magic Bleaching (Vigodent) induced the lowest level of DNA breakage. Negative and positive controls displayed absence and presence of DNA-damaging, respectively. Taken together, these results suggest that dental bleaching agents may be a factor that increases the level of DNA damage. A higher concentration of hydrogen peroxide produced higher noxious activities in the genome as detected by single cell gel (comet) assay.

Curauá fibers in the automobile industry - a sustainability assessment

Replacing glass fibers with natural fibers in the automobile industry can yield economic, environmental and social benefits. This article evaluates the prospective environmental impacts of automobile applications of curauá fiber (Ananas erectifolius), which nearly equates the physical properties of glass fibers. The study identified economic and social advantages of applying curauá fiber composites in car parts. Besides costing 50% less than fiber glass, the use of curauá fibers can promote regional development in the Amazon region. In order to realize significant environmental benefits, however, the curauá-based composites would have to be lighter than their glass fiber-based counterparts. © 2006 Elsevier Ltd. All rights reserved.

Colorimetric evaluation of composite materials with different thickness by reflectance spectroscopy

Selection of the proper shade and color matching of restorations to natural dentition continues to be one of the most frustrating problems in dentistry and currently available shade guide presents a limited selection of colors compared to those found in natural dentition. This investigation evaluation if the composites resins shade B2 are equivalent to the Vita shade guide B2. Twelve composite resins (Renamel Microfill Super Brite- Cosmedent USA, Renamel Universal Brite- Cosmedent USA, Renamel Microfill Body- Cosmedent USA, Renamel Universal Body- Cosmedent USA, Opallis EB2-FGM, Opallis DB2-FGM, Filtek Supreme XT-3M/ESPE, Filtek Z250-3M/ESPE, Filtek Z350-3M/ESPE, Z100-3M/ESPE, 4 Seasons Dentin - Ivoclar/Vivadent, Tetric Ceram - Ivoclar/Vivadent) shade B2 were used. From each composite, two specimens were made in a steel matrix with 8.0 mm diameter and 10.0 mm different predetermined thickness (0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 mm). The specimens were 40 seconds light polymerized by LED Ultrablue (DMC). The specimens were measured 10 times each to determine the shade using a reflectance spectrophotometer (Pocket Spec). According to results was verified that not any of composites resins shade B2 evaluated in this study presented values of color difference (ΔE) equivalent to the Vita shade guide B2 and the 2 mm thickness showed the closer match to the Vita shade guide B2.

The effect of different light-curing units on tensile strength and microhardness of a composite resin

The aim of this study was to evaluate the influence of different light-curing units on the tensile bond strength and microhardness of a composite resin (Filtek Z250 - 3M/ESPE). Conventional halogen (Curing Light 2500 - 3M/ESPE; CL) and two blue light emitting diode curing units (Ultraled - Dabi/Atlante; UL; Ultrablue IS - DMC; UB3 and UB6) were selected for this study. Different light intensities (670, 130, 300, and 600 mW/cm2, respectively) and different curing times (20s, 40s and 60s) were evaluated. Knoop microhardness test was performed in the area corresponding to the fractured region of the specimen. A total of 12 groups (n=10) were established and the specimens were prepared using a stainless steel mold composed by two similar parts that contained a cone-shaped hole with two diameters (8.0 mm and 5.0 mm) and thickness of 1.0 mm. Next, the specimens were loaded in tensile strength until fracture in a universal testing machine at a crosshead speed of 0.5 mm/min and a 50 kg load cell. For the microhardness test, the same matrix was used to fabricate the specimens (12 groups; n=5). Microhardness was determined on the surfaces that were not exposed to the light source, using a Shimadzu HMV-2 Microhardness Tester at a static load of 50 g for 30 seconds. Data were analyzed statistically by two-way ANOVA and Tukey's test (p<0.05). Regarding the individual performance of the light-curing units, there was similarity in tensile strength with 20-s and 40-s exposure times and higher tensile strength when a 60-s light-activation time was used. Regarding microhardness, the halogen lamp had higher results when compared to the LED units. For all light-curing units, the variation of light-exposure time did not affect composite microhardness. However, lower irradiances needed longer light-activation times to produce similar effect as that obtained with high-irradiance light-curing sources.

Effects of the biodegradation on biodegradable polymer blends and polypropylene

The large use of plastics in the world generates a large amount of waste which persists around 200 years in the environment. To minimize this effect is important to search some new polymer materials: the blends of biodegradable polymers with synthetic polymers. It is a large area that needs an Intensive research to investigate the blends properties and its behavior face to the different treatments to aim at the blodegradation. The blends used In this work are: some blodegradable polymers such as: poly(hydroxybutyrate) (PHB) and poly(s-polycaprolactone) (PCL) with a synthetic polymer, polypropylene (PP), in lower concentration. These blends were prepared using an internal mixer (Torque Rheometer), and pressed. These films were submitted to fungus biotreatment. The films analyses will be carried out by Fourier Transform Infrared (FTIR), UV-Vis absorption (UV-Vis), Scanning Electronic Microscopy (SEM), DSC and TGA. © 2008 American Institute of Physics.

Environmental evaluation of cogeneration scenarios in sugar industry

The development of new techniques that allow the analysis and optimization of energy systems bearing in mind environmental issues is indispensable in a world with finite natural resources and growing demand of energy. Among the energy systems that deserve special attention, cogeneration in the sugar industry must be pointed out, because it uses efficiently a common fuel for generation of useful heat and power. Within this frame, thermoeconomical optimization - 2nd Law of Thermodynamics analysis by exergy function and economic evaluation of the thermal system - gradually is taking importance as a powerful tool to assist to the decision making process. Also, the explicit consideration of environmental issues offers a better way to explore trade-offs between different aspects to support the decisions that must be made. In this work it is used the technique of Life Cycle Analysis (LCA) which allows to consider environmental matters as an integral part of the problem, in opposite to most of the environmental approaches that only reduce residuals generation , without taking into account impacts associated to other related processes. On the other hand, the consideration of environmental issues in optimization of energy systems is a novel and promissory contribution in the state of the art of energy optimization and LCA. The system under study is a sugar plant of Tucumán (Argentina) given the particular importance that this industry had inside the regional economy of the Argentinean Northwest. Although cogeneration comes being used a while ago in sugar industry, being the main objective the generation of heat and as secondary objective the electric power generation and mechanic power to cover several needs of working machineries, to the date it is no available a versatile tool that allows to analyze economical feasible alternatives bearing in mind environmental issues. At sugar plants, steam is generated in boilers using as fuel bagasse - cellulosic fiber waste obtained crushing the sugar cane- and it is used to give useful heat and shaft work to the plant, but it can also be used to generate electricity with export opportunities to the electrical network. The great number of process alternatives outlines a serious decision making problem in order to take advantage of the resources. Although the problem turns out to be a mixed non-linear problem (MINLP), the main contribution of this work is the development of a hybrid strategy to evaluate cogeneration alternatives that combines optimization approaches with environmental indicators. This powerful tool for its versatility and robustness to analyze cogeneration systems, will be of great help in the decision making process, because of their easy implementation to analyze the kind of problems presented in the sugar industry.

Estratégias de seleção dentro de progênies em duas populações de myracrodruon urundeuva Fr. All.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diferenças regionais do cultivo de café no Brasil

Brazil is one of the major coffee producers in the world, because of this, the goal of this study was to assess the regional differences of coffee cultivation for the reference crops 2001/2002 and 2002/03 by means of a life cycle assessment (LCA) in order to generate detailed production inventory data as well as quantify the potential environmental impacts of this crop. All information considered in this study (use of water, fossil based energy, fertilizers, pesticides and correctives) was taken from data collected from the producing farms. Four Brazilian coffee producer regions located at the Southeastern region were evaluated: Sul de Minas Gerais and Cerrado Mineiro in Minas Gerais State, and Mogiana and Alta Paulista regions in São Paulo State. The data refer to a production of 25.2 million kg of green coffee. Depending on the considered region, the production of 1,000 kg of green coffee requires, on average, approx. 9,300 to 13,000 kg of total energy, 70 to 130 kg of diesel, 6,500 to 12,700 kg of process water, 270 to 340 kg of fertilizers (NPK), 2.0 to 13.0 kg of pesticides, 230 to 600 kg of correctives, and yield around 1,600 to 1,900 kg/ha. Despite 20% of the coffee growers showing a good environmental performance, i.e. consumption of pesticides, fertilizers and correctives lower than the regional averages, this study has also identified some farms that can probably reduce the amount of some inputs and enhance their environmental performance.

Green teams: Understanding their roles in the environmental management of companies located in Brazil

Green teams are frequently considered in the state-of-the-art literature as an essential factor for companies aiming to implement and improve environmental management approaches and practices. However, most of the available literature on green teams is conceptual and theoretical by nature. Therefore, the main purpose of this article is to evaluate the main characteristics of green teams in Brazilian companies and to analyse the relationships between green teams and the maturity level of environmental management in those companies. Based on a conceptual background on corporate environmental management and green teams, a research was done in two complementary phases: a survey of 94 companies with ISO 14001 certification; and a multiple case study of four industrial companies. Survey results suggest that 82% of the studied companies have cross-functional green teams, i.e. involving various companies' departments; and 65% have functional green teams, i.e. individual department teams. The results of the case study suggest that the use of green teams is an instrument to the greening of companies with ISO 14001 in Brazil. The company with the most proactive and advanced environmental management is the same company which uses green teams more intensely. Green teams are especially necessary for implementing more technical environmental management practices, e.g. Life Cycle Assessment. Since this is one of the first studies analysing green teams, the results presented can be useful for companies and public policies aiming to implementation of environmental initiatives. © 2012 Elsevier Ltd. All rights reserved.

Dental fluorescence: Potential forensic use

In cases of identification of bones, skeletal segments or isolated bones, searching for biotypologic diagnostic data to estimate an individual's age enables comparing these data with those of missing individuals. Enamel, dentin and pulp undergo remarkable changes during an individual's life. The enamel becomes more mineralized, smoother and thinner, and deteriorates because of physiological and pathological factors. Dental pulp decreases in volume due to the deposition of secondary dentin; thus, the dentin becomes thicker with time. In natural teeth, the fluorescence phenomenon occurs in dentin and enamel and changes in those tissues may alter the expression of the natural tooth color. The aim of this study was to assess the correlation between age and teeth fluorescence for individuals from different age groups. The sample consisted of 66 randomly selected Brazilians of both genders aged 7-63 years old. They were divided into 6 groups: Group 1 - aged 7-12 years, Group 2 - aged 13-20 years, Group 3 - aged 21-30 years, Group 4 - aged 31-40 years, Group 5 - aged 41-50 years and Group 6 - aged between 51 and 63 years. Upper right or left central incisors were used for the study. Restored and aesthetic rehabilitated teeth were excluded from the sample. The measurement of tooth fluorescence was carried out via computer analysis of digital images using the software ScanWhite DMC/Darwin Systems - Brazil. It was observed that dental fluorescence decreases when comparing the age groups 21-30, 31-40, 41-50 and 51-63 years. The results also showed that there is a statistically significant difference between the groups 41-50 years and 21-30 years (p=. 0.005) and also among the group 51-63 years and all other groups (p< 0.005). It can be concluded that dental fluorescence is correlated with age and has a similar and stable behavior from 7 to 20 years of age. It reaches its maximum expected value at the age of 26.5 years and thereafter decreases. © 2013 Elsevier B.V.

Efeitos da mobilização precose e da mobilizaçao sobre o reparo do tendão patelar em ratos: análise morfológica e morfométrica

Pós-graduação em Biologia Geral e Aplicada - IBB

Produção otimizada de alginato e plástico biodegradável (poli-hidroxibutirato) por Azotobacter vinelandii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)