Balancing curriculum processes and content in a project centred curriculum - In pursuit of graduate attributes

Chemical engineering education is challenged around the world by demands and rapid changes encompassing a wide range of technical and social drivers. Graduates must be prepared for practice in increasingly diverse workplace environments in which generic or transferable attributes such as communication and teamwork together with technical excellence are mandated by prospective employers and society at large. If academe is to successfully deliver on these graduate attributes, effective curriculum design needs to include appropriate educational processes as well as course content. Conventional teacher centred approaches, stand-alone courses and retro-fitted remedial modules have not delivered the desired outcomes. Development of the broader spectrum of attributes is more likely when students are engaged with realistic and relevant experiences that demand the integration and practice of these attributes in contexts that the students find meaningful. This paper describes and evaluates The University of Queensland's Project Centred Curriculum in Chemical Engineering (PCC), a programme-wide approach to meeting these requirements. PCC strategically integrates project-based learning with more traditional instruction. Data collected shows improved levels of student attainment of generic skills with institutional and nationally benchmarked indicators showing significant increases in student perceptions of teaching quality, and overall satisfaction with the undergraduate experience. Endorsements from Australian academic, professional and industry bodies also support the approach as more effectively aligning engineering education with professional practice requirements.

GESTÃO DO CONHECIMENTO: UM ESTUDO SOBRE A RELAÇÃO ENTRE A LIDERANÇA TRANSFORMACIONAL, A CONVERSÃO DO CONHECIMENTO E A EFICÁCIA ORGANIZACIONAL

Este estudo teve como objetivo principal analisar a relação entre a Liderança Transformacional, a Conversão do Conhecimento e a Eficácia Organizacional. Foram considerados como pressupostos teóricos conceitos consolidados sobre os temas desta relação, além de recentes pesquisas já realizadas em outros países e contextos organizacionais. Com base nisto identificou-se potencial estudo de um modelo que relacionasse estes três conceitos. Para tal considera-se que as organizações que buscam atingir Vantagem Competitiva e incorporam a Knowledge-Based View possam conquistar diferenciação frente a seus concorrentes. Nesse contexto o conhecimento ganha maior destaque e papel protagonista nestas organizações. Dessa forma criar conhecimento através de seus colaboradores, passa a ser um dos desafios dessas organizações ao passo que sugere melhoria de seus indicadores Econômicos, Sociais, Sistêmicos e Políticos, o que se define por Eficácia Organizacional. Portanto os modos de conversão do conhecimento nas organizações, demonstram relevância, uma vez que se cria e se converte conhecimentos através da interação entre o conhecimento existente de seus colaboradores. Essa conversão do conhecimento ou modelo SECI possui quatro modos que são a Socialização, Externalização, Combinação e Internalização. Nessa perspectiva a liderança nas organizações apresenta-se como um elemento capaz de influenciar seus colaboradores, propiciando maior dinâmica ao modelo SECI de conversão do conhecimento. Se identifica então na liderança do tipo Transformacional, características que possam influenciar colaboradores e entende-se que esta relação entre a Liderança Transformacional e a Conversão do Conhecimento possa ter influência positiva nos indicadores da Eficácia Organizacional. Dessa forma esta pesquisa buscou analisar um modelo que explorasse essa relação entre a liderança do tipo Transformacional, a Conversão do Conhecimento (SECI) e a Eficácia Organizacional. Esta pesquisa teve o caráter quantitativo com coleta de dados através do método survey, obtendo um total de 230 respondentes válidos de diferentes organizações. O instrumento de coleta de dados foi composto por afirmativas relativas ao modelo de relação pesquisado com um total de 44 itens. O perfil de respondentes concentrou-se entre 30 e 39 anos de idade, com a predominância de organizações privadas e de departamentos de TI/Telecom, Docência e Recursos Humanos respectivamente. O tratamento dos dados foi através da Análise Fatorial Exploratória e Modelagem de Equações Estruturais via Partial Least Square Path Modeling (PLS-PM). Como resultado da análise desta pesquisa, as hipóteses puderam ser confirmadas, concluindo que a Liderança Transformacional apresenta influência positiva nos modos de Conversão do Conhecimento e que; a Conversão do Conhecimento influencia positivamente na Eficácia Organizacional. Ainda, concluiu-se que a percepção entre os respondentes não apresenta resultado diferente sobre o modelo desta pesquisa entre quem possui ou não função de liderança.

User-centred ontology learning for knowledge management

Automatic ontology building is a vital issue in many fields where they are currently built manually. This paper presents a user-centred methodology for ontology construction based on the use of Machine Learning and Natural Language Processing. In our approach, the user selects a corpus of texts and sketches a preliminary ontology (or selects an existing one) for a domain with a preliminary vocabulary associated to the elements in the ontology (lexicalisations). Examples of sentences involving such lexicalisation (e.g. ISA relation) in the corpus are automatically retrieved by the system. Retrieved examples are validated by the user and used by an adaptive Information Extraction system to generate patterns that discover other lexicalisations of the same objects in the ontology, possibly identifying new concepts or relations. New instances are added to the existing ontology or used to tune it. This process is repeated until a satisfactory ontology is obtained. The methodology largely automates the ontology construction process and the output is an ontology with an associated trained leaner to be used for further ontology modifications.

People management issues in Indian KPOs

Purpose: The business process outsourcing (BPO) industry in India is evolving rapidly, and one of the key characteristics of this industry is the emergence of high-end services offered by knowledge processing outsourcing (KPO) organizations. These organizations are set to grow at a tremendous pace. Given the people-intensive nature of this industry, efficient employee management is bound to play a critical role. The literature lacks studies offering insights into the HR challenges involved and the ways in which they are addressed by KPOs. The purpose of this paper is to attempt to fill this gap by presenting findings from an in-depth case study of a KPO organization. Design/methodology/ approach: To achieve the research objective we adopted an in-depth case study approach. The research setting was that of a KPO organization in India, which specialises in offering complex analytics, accounting and support services to the real estate and financial services industries. Findings: The results of this study highlight the differences in the nature of work characteristics in such organizations as compared to call centres. The study also highlights some of the key people management challenges that these organizations face like attracting and retaining talent. The case company adopts formal, structured, transparent and innovative human resource practices. The study also highlights that such enlightened human resource practices stand on the foundations laid by an open work environment and facilitative leadership. Research limitations/implications: One of the key limitations is that the analysis is based on primary data from a single case study and only 18 interviews. The analysis contributes to the fields of KPO, HRM and India and has key messages for policy makers. Originality/value: The literature on outsourcing has in general focused on call centres established in the developed world. However, the booming BPO industry in India is also beginning to offer high-end services, which are far above the typical call centres. These KPOs and their people management challenges are relatively unexplored territories in the literature. By conducting this study in an emerging market (India) and focusing on people-related challenges in KPOs, this study attempts to provide a fresh perspective to the extant BPO literature. © Emerald Group Publishing Limited.

Editorial

This special issue of the Journal of the Operational Research Society is dedicated to papers on the related subjects of knowledge management and intellectual capital. These subjects continue to generate considerable interest amongst both practitioners and academics. This issue demonstrates that operational researchers have many contributions to offer to the area, especially by bringing multi-disciplinary, integrated and holistic perspectives. The papers included are both theoretical as well as practical, and include a number of case studies showing how knowledge management has been implemented in practice that may assist other organisations in their search for a better means of managing what is now recognised as a core organisational activity. It has been accepted by a growing number of organisations that the precise handling of information and knowledge is a significant factor in facilitating their success but that there is a challenge in how to implement a strategy and processes for this handling. It is here, in the particular area of knowledge process handling that we can see the contributions of operational researchers most clearly as is illustrated in the papers included in this journal edition. The issue comprises nine papers, contributed by authors based in eight different countries on five continents. Lind and Seigerroth describe an approach that they call team-based reconstruction, intended to help articulate knowledge in a particular organisational. context. They illustrate the use of this approach with three case studies, two in manufacturing and one in public sector health care. Different ways of carrying out reconstruction are analysed, and the benefits of team-based reconstruction are established. Edwards and Kidd, and Connell, Powell and Klein both concentrate on knowledge transfer. Edwards and Kidd discuss the issues involved in transferring knowledge across frontières (borders) of various kinds, from those borders within organisations to those between countries. They present two examples, one in distribution and the other in manufacturing. They conclude that trust and culture both play an important part in facilitating such transfers, that IT should be kept in a supporting role in knowledge management projects, and that a staged approach to this IT support may be the most effective. Connell, Powell and Klein consider the oft-quoted distinction between explicit and tacit knowledge, and argue that such a distinction is sometimes unhelpful. They suggest that knowledge should rather be regarded as a holistic systemic property. The consequences of this for knowledge transfer are examined, with a particular emphasis on what this might mean for the practice of OR Their view of OR in the context of knowledge management very much echoes Lind and Seigerroth's focus on knowledge for human action. This is an interesting convergence of views given that, broadly speaking, one set of authors comes from within the OR community, and the other from outside it. Hafeez and Abdelmeguid present the nearest to a 'hard' OR contribution of the papers in this special issue. In their paper they construct and use system dynamics models to investigate alternative ways in which an organisation might close a knowledge gap or skills gap. The methods they use have the potential to be generalised to any other quantifiable aspects of intellectual capital. The contribution by Revilla, Sarkis and Modrego is also at the 'hard' end of the spectrum. They evaluate the performance of public–private research collaborations in Spain, using an approach based on data envelopment analysis. They found that larger organisations tended to perform relatively better than smaller ones, even though the approach used takes into account scale effects. Perhaps more interesting was that many factors that might have been thought relevant, such as the organisation's existing knowledge base or how widely applicable the results of the project would be, had no significant effect on the performance. It may be that how well the partnership between the collaborators works (not a factor it was possible to take into account in this study) is more important than most other factors. Mak and Ramaprasad introduce the concept of a knowledge supply network. This builds on existing ideas of supply chain management, but also integrates the design chain and the marketing chain, to address all the intellectual property connected with the network as a whole. The authors regard the knowledge supply network as the natural focus for considering knowledge management issues. They propose seven criteria for evaluating knowledge supply network architecture, and illustrate their argument with an example from the electronics industry—integrated circuit design and fabrication. In the paper by Hasan and Crawford, their interest lies in the holistic approach to knowledge management. They demonstrate their argument—that there is no simple IT solution for organisational knowledge management efforts—through two case study investigations. These case studies, in Australian universities, are investigated through cultural historical activity theory, which focuses the study on the activities that are carried out by people in support of their interpretations of their role, the opportunities available and the organisation's purpose. Human activities, it is argued, are mediated by the available tools, including IT and IS and in this particular context, KMS. It is this argument that places the available technology into the knowledge activity process and permits the future design of KMS to be improved through the lessons learnt by studying these knowledge activity systems in practice. Wijnhoven concentrates on knowledge management at the operational level of the organisation. He is concerned with studying the transformation of certain inputs to outputs—the operations function—and the consequent realisation of organisational goals via the management of these operations. He argues that the inputs and outputs of this process in the context of knowledge management are different types of knowledge and names the operation method the knowledge logistics. The method of transformation he calls learning. This theoretical paper discusses the operational management of four types of knowledge objects—explicit understanding; information; skills; and norms and values; and shows how through the proposed framework learning can transfer these objects to clients in a logistical process without a major transformation in content. Millie Kwan continues this theme with a paper about process-oriented knowledge management. In her case study she discusses an implementation of knowledge management where the knowledge is centred around an organisational process and the mission, rationale and objectives of the process define the scope of the project. In her case they are concerned with the effective use of real estate (property and buildings) within a Fortune 100 company. In order to manage the knowledge about this property and the process by which the best 'deal' for internal customers and the overall company was reached, a KMS was devised. She argues that process knowledge is a source of core competence and thus needs to be strategically managed. Finally, you may also wish to read a related paper originally submitted for this Special Issue, 'Customer knowledge management' by Garcia-Murillo and Annabi, which was published in the August 2002 issue of the Journal of the Operational Research Society, 53(8), 875–884.

Using process mapping and business process simulation to support a process-based approach to change in a public sector organisation

A case study demonstrates the use of a process-based approach to change regarding the implementation of an information system for road traffic accident reporting in a UK police force. The supporting tools of process mapping and business process simulation are used in the change process and assist in communicating the current process design and people's roles in the overall performance of that design. The simulation model is also used to predict the performance of new designs incorporating the use of information technology. The approach is seen to have a number of advantages in the context of a public sector organisation. These include the ability for personnel to move from a traditional grouping of staff in occupational groups with relationships defined by reporting requirements to a view of their role in a process, which delivers a performance to a customer. By running the simulation through time it is also possible to gauge how changes at an operational level can lead to the meeting of strategic targets over time. Also the ability of simulation to proof new designs was seen as particularly important in a government agency were past failures of information technology investments had contributed to a more risk averse approach to their implementation. © 2004 Elsevier Ltd. All rights reserved.

Edges and bars: where do people see features in 1-D images?

There have been two main approaches to feature detection in human and computer vision - based either on the luminance distribution and its spatial derivatives, or on the spatial distribution of local contrast energy. Thus, bars and edges might arise from peaks of luminance and luminance gradient respectively, or bars and edges might be found at peaks of local energy, where local phases are aligned across spatial frequency. This basic issue of definition is important because it guides more detailed models and interpretations of early vision. Which approach better describes the perceived positions of features in images? We used the class of 1-D images defined by Morrone and Burr in which the amplitude spectrum is that of a (partially blurred) square-wave and all Fourier components have a common phase. Observers used a cursor to mark where bars and edges were seen for different test phases (Experiment 1) or judged the spatial alignment of contours that had different phases (e.g. 0 degrees and 45 degrees ; Experiment 2). The feature positions defined by both tasks shifted systematically to the left or right according to the sign of the phase offset, increasing with the degree of blur. These shifts were well predicted by the location of luminance peaks (bars) and gradient peaks (edges), but not by energy peaks which (by design) predicted no shift at all. These results encourage models based on a Gaussian-derivative framework, but do not support the idea that human vision uses points of phase alignment to find local, first-order features. Nevertheless, we argue that both approaches are presently incomplete and a better understanding of early vision may combine insights from both. (C)2004 Elsevier Ltd. All rights reserved.

The discourse of climate change: a corpus-based approach

Based on Goffman’s definition that frames are general ‘schemata of interpretation’ that people use to ‘locate, perceive, identify, and label’, other scholars have used the concept in a more specific way to analyze media coverage. Frames are used in the sense of organizing devices that allow journalists to select and emphasise topics, to decide ‘what matters’ (Gitlin 1980). Gamson and Modigliani (1989) consider frames as being embedded within ‘media packages’ that can be seen as ‘giving meaning’ to an issue. According to Entman (1993), framing comprises a combination of different activities such as: problem definition, causal interpretation, moral evaluation, and/or treatment recommendation for the item described. Previous research has analysed climate change with the purpose of testing Downs’s model of the issue attention cycle (Trumbo 1996), to uncover media biases in the US press (Boykoff and Boykoff 2004), to highlight differences between nations (Brossard et al. 2004; Grundmann 2007) or to analyze cultural reconstructions of scientific knowledge (Carvalho and Burgess 2005). In this paper we shall present data from a corpus linguistics-based approach. We will be drawing on results of a pilot study conducted in Spring 2008 based on the Nexis news media archive. Based on comparative data from the US, the UK, France and Germany, we aim to show how the climate change issue has been framed differently in these countries and how this framing indicates differences in national climate change policies.

People, technology, processes and risk knowledge sharing

The present global economic crisis creates doubts about the good use of accumulated experience and knowledge in managing risk in financial services. Typically, risk management practice does not use knowledge management (KM) to improve and to develop new answers to the threats. A key reason is that it is not clear how to break down the “organizational silos” view of risk management (RM) that is commonly taken. As a result, there has been relatively little work on finding the relationships between RM and KM. We have been doing research for the last couple of years on the identification of relationships between these two disciplines. At ECKM 2007 we presented a general review of the literature(s) and some hypotheses for starting research on KM and its relationship to the perceived value of enterprise risk management. This article presents findings based on our preliminary analyses, concentrating on those factors affecting the perceived quality of risk knowledge sharing. These come from a questionnaire survey of RM employees in organisations in the financial services sector, which yielded 121 responses. We have included five explanatory variables for the perceived quality of risk knowledge sharing. These comprised two variables relating to people (organizational capacity for work coordination and perceived quality of communication among groups), one relating to process (perceived quality of risk control) and two related to technology (web channel functionality and RM information system functionality). Our findings so far are that four of these five variables have a significant positive association with the perceived quality of risk knowledge sharing: contrary to expectations, web channel functionality did not have a significant association. Indeed, in some of our exploratory regression studies its coefficient (although not significant) was negative. In stepwise regression, the variable organizational capacity for work coordination accounted for by far the largest part of the variation in the dependent variable perceived quality of risk knowledge sharing. The “people” variables thus appear to have the greatest influence on the perceived quality of risk knowledge sharing, even in a sector that relies heavily on technology and on quantitative approaches to decision making. We have also found similar results with the dependent variable perceived value of Enterprise Risk Management (ERM) implementation.

How do older people with sight loss manage their general health? A qualitative study

Purpose: Older people with sight loss experience a number of barriers to managing their health. The purpose of this qualitative study was to explore how older people with sight loss manage their general health and explore the techniques used and strategies employed for health management. Methods: Semi-structured face-to-face interviews were conducted with 30 participants. Interviews were audio-recorded, transcribed verbatim and analysed using thematic analysis. Results: Health management challenges experienced included: managing multiple health conditions; accessing information; engaging in health behaviours and maintaining wellbeing. Positive strategies included: joining support groups, clubs and societies; using low vision aids; seeking support from family and friends and accessing support through health and social care services. Conclusion: Healthcare professionals need to be more aware of the challenges faced by older people with sight loss. Improved promotion of group support and charity services which are best placed to share information, provide fora to learn about coping techniques and strategies, and give older people social support to prevent isolation is needed. Rehabilitation and support services and equipment can only be beneficial if patients know what is available and how to access them. Over-reliance on self-advocacy in current healthcare systems is not conducive to patient-centred care. Implications for Rehabilitation Sight loss in older people can impact on many factors including health management. This study identifies challenges to health management and highlights strategies used by older people with sight loss to manage their health. Access to support often relies on patients seeking information for themselves. However, self-advocacy is challenging due to information accessibility barriers. Informal groups and charities play an important role in educating patients about their condition and advising on available support to facilitate health management.

A pragmatic Bayesian approach to wind field retrieval

The ERS-1 Satellite was launched in July 1991 by the European Space Agency into a polar orbit at about 800 km, carrying a C-band scatterometer. A scatterometer measures the amount of backscatter microwave radiation reflected by small ripples on the ocean surface induced by sea-surface winds, and so provides instantaneous snap-shots of wind flow over large areas of the ocean surface, known as wind fields. Inherent in the physics of the observation process is an ambiguity in wind direction; the scatterometer cannot distinguish if the wind is blowing toward or away from the sensor device. This ambiguity implies that there is a one-to-many mapping between scatterometer data and wind direction. Current operational methods for wind field retrieval are based on the retrieval of wind vectors from satellite scatterometer data, followed by a disambiguation and filtering process that is reliant on numerical weather prediction models. The wind vectors are retrieved by the local inversion of a forward model, mapping scatterometer observations to wind vectors, and minimising a cost function in scatterometer measurement space. This thesis applies a pragmatic Bayesian solution to the problem. The likelihood is a combination of conditional probability distributions for the local wind vectors given the scatterometer data. The prior distribution is a vector Gaussian process that provides the geophysical consistency for the wind field. The wind vectors are retrieved directly from the scatterometer data by using mixture density networks, a principled method to model multi-modal conditional probability density functions. The complexity of the mapping and the structure of the conditional probability density function are investigated. A hybrid mixture density network, that incorporates the knowledge that the conditional probability distribution of the observation process is predominantly bi-modal, is developed. The optimal model, which generalises across a swathe of scatterometer readings, is better on key performance measures than the current operational model. Wind field retrieval is approached from three perspectives. The first is a non-autonomous method that confirms the validity of the model by retrieving the correct wind field 99% of the time from a test set of 575 wind fields. The second technique takes the maximum a posteriori probability wind field retrieved from the posterior distribution as the prediction. For the third technique, Markov Chain Monte Carlo (MCMC) techniques were employed to estimate the mass associated with significant modes of the posterior distribution, and make predictions based on the mode with the greatest mass associated with it. General methods for sampling from multi-modal distributions were benchmarked against a specific MCMC transition kernel designed for this problem. It was shown that the general methods were unsuitable for this application due to computational expense. On a test set of 100 wind fields the MAP estimate correctly retrieved 72 wind fields, whilst the sampling method correctly retrieved 73 wind fields.

An operational approach to object-oriented software development

The traditional waterfall software life cycle model has several weaknesses. One problem is that a working version of a system is unavailable until a late stage in the development; any omissions and mistakes in the specification undetected until that stage can be costly to maintain. The operational approach which emphasises the construction of executable specifications can help to remedy this problem. An operational specification may be exercised to generate the behaviours of the specified system, thereby serving as a prototype to facilitate early validation of the system's functional requirements. Recent ideas have centred on using an existing operational method such as JSD in the specification phase of object-oriented development. An explicit transformation phase following specification is necessary in this approach because differences in abstractions between the two domains need to be bridged. This research explores an alternative approach of developing an operational specification method specifically for object-oriented development. By incorporating object-oriented concepts in operational specifications, the specifications have the advantage of directly facilitating implementation in an object-oriented language without requiring further significant transformations. In addition, object-oriented concepts can help the developer manage the complexity of the problem domain specification, whilst providing the user with a specification that closely reflects the real world and so the specification and its execution can be readily understood and validated. A graphical notation has been developed for the specification method which can capture the dynamic properties of an object-oriented system. A tool has also been implemented comprising an editor to facilitate the input of specifications, and an interpreter which can execute the specifications and graphically animate the behaviours of the specified systems.

The directions taken by young people on leaving compulsory education:a study in two Birmingham schools

The thesis addresses the relative importance of factors affecting working-class school-leavers' post-compulsory education transitions into post-sixteen education, training, employment and unemployment. It focuses on school-leavers choosing to enter the labour market, whether successfully or not and the influences affecting this choice. Methodologically, the longitudinal approach followed young people from before they left school to a period of months after. Discrepancies between young people's intended and actual destinations emphasised the diverse influences on post-sixteen transitions. These influences were investigated through a dynamic multi-method approach, drawing from quantitative and qualitative methodologies providing depth and insight while locating the research within a structural framework, allowing a comparison with local and national trends. Two crucial factors of school and gender affected young people's intended and actual post-sixteen directions. School policy, including treatment of disaffected pupils and recruitment to a large, on-site sixth form, influenced the number of pupils opting to continue their education. Girls were more likely to continue education after the end of compulsory schooling and gave different reasons to boys for doing so. Family and peer groups were influential, helping young people develop a 'horizon for action' incorporating habitus and subjective preferences that specified acceptable post-sixteen directions. These influences operated within the context of the local labour market. Perception of the latter rather than actual conditions informed post-sixteen decisions; however, labour market reality influenced the success of the school-leavers' endeavours. The research found that the economics-based rational choice model of decision-making did not apply to many working class school-leavers. The cohort made pragmatically rational decisions dependent on their 'horizon for action'. based on partial, occasionally inaccurate information. Policy recommendations consider the careers service and structure or school sixth forms as aiding successful transitions from compulsory education into education, employment or training. The maintenance allowance may be ineffectual in tackling its objective of social inclusion.

A systems approach to students' motivation and academic achievement

This research followed earlier work (reported in a thesis presented in 1970) on factors associated with the academic performance of a sample of technical college students, which recommended the further study of students' motivation. The technical college then became part of a polytechnic, but the courses chosen for the continuation of the research were all of a specifically vocational character. The approach was influenced by Angyal (1941) in seeking to relate symbolic processes to broader behaviour patterns within a systems framework. Forms of semantic differential were developed to obtain the students' responses to words representing various activities and various people both within and outside the academic environment. Also, a "!growth motivation questionnaire" was produced using ideas from self-actualisation, job satisfaction and expectancy theory and examination marks were recorded. From pre-coded responses to the growth motivation questionnaire, scores on a 'study satisfaction' factor were calculated, and subsamples of students were taken at the extremes of this scale. Wriitten responses from the same questionnaire and semantic differential factor scores showed contrasting patterns between the two subsamples. Interpretation of these patterns suggested a diversity of approach to academic work among the students which calls for greater flexibility in the educational system serving them.