Implementation of WHO Quality Rights assessment in Kabul Mental Health Hospital

RESUMO: Objetivo Avaliar a qualidade dos serviços de saúde mental e a situação dos direitos humanos no Hospital de Saúde Mental de Kabul (KMHH) e fornecer recomendações para o desenvolvimento de um plano de melhoria, actualização e revisão da Política, Estratégia e Plano Nacionais de Saúde Mental,. Métodos A avaliação foi realizada em Janeiro de 2015 no KMHH e na Burn Ward do Hospital Terciário de Isteqlal por uma equipa multidisciplinar usando Qualidade Direitos Tool Kit da OMS. Antes da avaliação, o protocolo foi aprovado pelo Institutional Review Board e obtido o consentimento informado de cada entrevistado. Realizaram-se entrevistas com 16 utentes do serviço, 17 funcionários do hospital e 7 familiares, além da revisão de documentos e da observação das unidades de internamento do KMHH e das interações interpessoais entre funcionários do hospital e utentes do serviço. A comissão de avaliação reviu também a documentação e observou a Unidade de Queimados do Hospital Terciário de Isteqlal, a fim de avaliar e comparar a paridade entre as duas instalações. Após a avaliação, todos os membros da comissão se reuniram e puseram em conjunto todas as conclusões num relatório final. Resultados Encontrámos algumas lacunas graves no nível de prestação de serviços e no respeito pelos direitos humanos dos utentes dos serviços e dos seus familiares. Uma série de políticas, diretrizes e procedimentos relacionados com os direitos humanos dos pacientes estavam ausentes. O ambiente terapêutico e o padrão de vida eram inadequados, existia má qualidade do atendimento e dos serviços prestados, os utilizadores enfrentavam violações do direito ao exercício da capacidade legal e da liberdade pessoal, eram quimica e fisicamente (uso de correntes) contidos e expostos a abusos verbais, físicos e emocionais, e havia grande ênfase no tratamento institucional. Todos estes aspectos foram considerados como extensa violação dos direitos humanos dos utentes de serviço do KMHH. Conclusão Os serviços disponíveis para utentes dos serviços de saúde mental apresentam alguns problemas devido à desconfiança e falta de consciencialização sobre os direitos das pessoas com doença mental e precisam ser alterados de forma positiva. A Lei de Saúde Mental existente difere muito das recomendações da Convenção sobre os Direitos das Pessoas com Incapacidades (CRPD) e requer revisão e adaptação de acordo com esta Convenção. -------------------------------- ABSTRACT: Objective To assess the quality of mental health services and human rights condition in the Kabul Mental Health Hospital (KMHH) and provide recommendations for development of an improvement plan and to update and revise the National Mental Health Policy, Strategy and Plan. Methods The assessment was conducted in January 2015 in the KMHH and the Burn Ward of Isteqlal Tertiary Hospital by a multidisciplinary team using WHO Quality Rights Tool Kit. Before the assessment, Institutional Review Board approval and informed consent from each interviewee were obtained. Interviews were conducted with 16 service users, 17 hospital staffs and 7 family members in addition to documents review and observation of inpatient units of KMHH plus interpersonal interactions between hospital staff and service users. The assessment committee reviewed the documentation and observed the Burn Ward of Isteqlal Tertiary hospital in order to measure and compare parity between the two facilities. After the assessment, all committee members gathered and synchronized all findings into a final report. Results There were some serious gaps on service provision level and respecting human rights of service users and their family members. A series of policies, guidelines and procedures related to patients’ human rights were absent. Inadequate treatment environment and standard of living, poor quality of care and services, violations of the right to exercise legal capacity and personal liberty, being chemically and physically (e.g. chain) restrained, being exposed to verbal, physical and emotional abuse, and emphasis on institutional treatment were all extensive human rights violation that service users were experiencing in KMHH. Conclusion The available services for mental health service users are questionable due to mistrust and lack of awareness about rights of people with disabilities and need to be positively changed. Existing Mental Health Act has a large number of disparities with the CRPD and requires revision and adaptation in accordance to CRPD.

Design and implementation of an assurance map at Sonae retail business

The present Working Project aims at studying the topic of assurance mapping in a specific organizational context of a Portuguese retail company. For this purpose, an assurance map framework was designed to support the decision making process of stakeholders, through the delivery of comfort concerning risks, operations and control. In the end, the framework was successfully implemented for the process sourcing of goods in two business units of the company. Although, further implementation of the framework proved not to be feasible during the project’s timespan, it is expected to occur in the near future.

Definition, implementation and management of m.commerce apps and services

This report aims to analyse the Definition, Implementation and Management of Vodafone Portugal’s Apps and Services, so that possible ways of improvement can be suggested. To do so, Vodafone’s strategy regarding the development/ implementation of specific Apps and Services, as well as the strategy of its competitors are going to be analysed. This analysis is going to be complemented with insights from some key-persons of Vodafone’s Consumer Business Unit team in Portugal. Findings suggest that Vodafone is ahead of its competitors when it comes to developing the most innovative Apps and Services, but there is always room for improvements, especially when it comes to communication.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Influence of the wood mechanical properties in the dovetail joint behavior

The force distribution inside a dovetail joint is complex. Wood is simultaneously loaded in different directions in the several connected surfaces. The analytical solutions available for the analysis of the behavior of those carpentry joints rely on the mechanical properties of wood. In particular, the stiffness properties of wood under compression are crucial for the forces equilibrium. Simulations showed that the stiffness values considered in each of the springs normally assumed in the analytical models, have great influence in the bearing capacity and stiffness of the dovetail joints, with important consequence on the stress distribution over the overall structure. In a wide experimental campaign, the properties under compression of the most common wood species of existing timber structures have been determined. Then, a solved example of a dovetail joint is presented assuming different wood species and the corresponding strength and stiffness properties values obtained in the tests.

Behaviour of a dovetail joint solved using force analyses

Dovetail joints are one of the most cornrnonly used joints during Gothic and Baroque periods. Despite being coristructed in the sarne way during the ages, there is no analyticai solution available to help its analysis and design so required in reconstruction works of existing timber structures. An analytical solution based on the principie of virtual works under different types of loading is presented in this paper as weli as differences in bearing capacity of the joint for chosen types of loading, when different wood species are used. The accuracy of the presented solution is confirrned by data obtained from experimental tests of scaied modeis of a dovetail joint.

Assessing student individual performance within PBL teams: findings from the implementation of a new mechanism

This paper reports on the experience of the implementation of a new mechanism to assess individual student contribution within project work, where students work in teams to solve a large-scale open-ended interdisciplinary project. The study takes place at the University of Minho, with first year engineering students, enrolled in the Industrial Management and Engineering (Integrated Masters) degree. The aim of this paper is to describe the main principles and procedures underlying the assessment mechanism created and also provide some feedback from its first implementation, based on the students, lecturers and tutors perceptions. For data collection, a survey was sent to all course lecturers and tutors involved in the assessment process. Students also contributed with suggestions, both on a workshop held at the end of the project and also by answering a survey on the overall satisfaction with PBL experience. Findings show a positive level of acceptance of the new mechanism by the students and also by the lecturers and tutors. The study identified the need to clarify the criteria used by the lecturers and the exact role of the tutor, as well as the need for further improvement of its features and procedures. Some recommendations are also issued regarding technical aspects related to some of the steps of the procedures, as well as the need for greater support on the adjustment and final setting of the individual grades.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Implementation of integral viscoelastic constitutive models in OpenFOAM® computational library

This work reports the implementation and verification of a new so lver in OpenFOAM® open source computational library, able to cope with integral viscoelastic models based on the integral upper-convected Maxwell model. The code is verified through the comparison of its predictions with analytical solutions and numerical results obtained with the differential upper-convected Maxwell model

Learning joint representations for order and timing of perceptual-motor sequences: a dynamic neural field approach

Many of our everyday tasks require the control of the serial order and the timing of component actions. Using the dynamic neural field (DNF) framework, we address the learning of representations that support the performance of precisely time action sequences. In continuation of previous modeling work and robotics implementations, we ask specifically the question how feedback about executed actions might be used by the learning system to fine tune a joint memory representation of the ordinal and the temporal structure which has been initially acquired by observation. The perceptual memory is represented by a self-stabilized, multi-bump activity pattern of neurons encoding instances of a sensory event (e.g., color, position or pitch) which guides sequence learning. The strength of the population representation of each event is a function of elapsed time since sequence onset. We propose and test in simulations a simple learning rule that detects a mismatch between the expected and realized timing of events and adapts the activation strengths in order to compensate for the movement time needed to achieve the desired effect. The simulation results show that the effector-specific memory representation can be robustly recalled. We discuss the impact of the fast, activation-based learning that the DNF framework provides for robotics applications.

A new competitive implementation of the electromagnetism-like algorithm for global optimization

The Electromagnetism-like (EM) algorithm is a population- based stochastic global optimization algorithm that uses an attraction- repulsion mechanism to move sample points towards the optimal. In this paper, an implementation of the EM algorithm in the Matlab en- vironment as a useful function for practitioners and for those who want to experiment a new global optimization solver is proposed. A set of benchmark problems are solved in order to evaluate the performance of the implemented method when compared with other stochastic methods available in the Matlab environment. The results con rm that our imple- mentation is a competitive alternative both in term of numerical results and performance. Finally, a case study based on a parameter estimation problem of a biology system shows that the EM implementation could be applied with promising results in the control optimization area.

Form tutors in the joint teaching of music: perspectives and experiences

In the Portuguese school system, form tutors (FTs) are an intermediate education management structure. The form tutor is responsible for a position of coordination and orientation with a «threefold function»: a relationship with students, relationship with the student’s family and relationship with other class teachers. The joint teaching of music is a part of the educational system in basic education. It is optional and provides musical and instrumental training to students who are interested in taking it. In order to achieve this, there is a system, subject to protocols, between general education schools and schools specializing in teaching music. There is also the position of FT in specialized schools and it also includes a «threefold function». However, these FTs have the additional role of representing music teachers at the class council, which is held at the general education school. Thus, in these cases, both FTs have a fourth joint area, between the music school and the general education school, which makes the relationship between them even more complex. This paper is based on the analysis of empirical data obtained from the testimonies of FTs regarding their representations and experiences in leadership and the coordination of teachers among schools in which there is a joint teaching system. The aim of collecting narratives is to look into some of the main challenges and confrontations related to leadership issues, which we assume to be the focus of those who have the role of form tutor in that specific context.

Smile-kids: uma experiência de educação e formação de educadores de infância em creches

O presente estudo pretende descrever o programa de intervenção, baseado no desenvolvimento de conhe‑ cimentos e competências em educadores de infância relacionados com a alimentação, crescimento, desen‑ volvimento e adesão a novos alimentos na primeira infância. Os educadores de infância das creches (18 no total) participaram no programa de intervenção, que ocorreu entre dezembro de 2013 e fevereiro de 2014, acreditada pelo Ministério da Educação, Conselho Científico-Pedagógico da Formação Contínua. Globalmente, a oficina de formação constituiu-se como um espaço de reflexão, análise e exploração de temáticas relacionadas com os estilos de vida na primeira infância, num total de 25 horas de formação presencias e 25 horas de experimentação no contexto de trabalho das formandas. Procurámos centrar os momentos formativos numa pedagogia baseada na partilha, expo‑ sição de perspetivas singulares entre pares, colaboração e iniciativa conjunta. Explorámos as expetativas das formandas relativamente à oficina de formação e as suas representações sobre a alimentação em crianças. A experiência terminou, mas com um sentido expectável de continuidade, pois deixou marcas em todos os que participaram. As implicações para a prática foram testemunhadas por todas as formandas.

Implementation and validation of a strain rate dependent anisotropic continuum model for masonry

A newly developed strain rate dependent anisotropic continuum model is proposed for impact and blast applications in masonry. The present model adopted the usual approach of considering different yield criteria in tension and compression. The analysis of unreinforced block work masonry walls subjected to impact is carried out to validate the capability of the model. Comparison of the numerical predictions and test data revealed good agreement. Next, a parametric study is conducted to evaluate the influence of the tensile strengths along the three orthogonal directions and of the wall thickness on the global behavior of masonry walls.