Can Attention Focus Instructions Reduce the Effects of Fatigue on Balance Control?

Localized muscular fatigue has been identified to have detrimental effects on balance control, an important skill for everyday life. Manipulation of attention focus instructions has been shown to benefit performance of various motor skills including balance and has been found to facilitate endurance during fatiguing tasks. The purpose of this thesis was to determine if the use of attention focus instructions could attenuate the effects of muscular fatigue on balance control. Twenty-four participants performed a balance task (two-legged stance on an unstable platform) before and after a fatigue protocol. Trunk sway, platform excursions, and lower limb muscle activity was measured. Results suggest that use of either internal or external attention focus instructions can reduce the immediate effects of muscular fatigue of the lower limb on balance control as shown through reduced trunk sway and platform excursions. These results have relevance for individuals performing balance tasks in a fatigued state.

Temporal patterns of memory source incorporations into dreams and their relationships to dreamed locus of control

Les incorporations des mémoires épisodiques dans les rêves apparaissent en formes fragmentées et suivent un modèle temporel distinct qui suit une courbe sinusoïdale. Ce modèle est caractérisé par les incorporations immédiates, qui apparaissent 1-2 jours après l’événement (effet de résidus diurnes), et les incorporations tardives, qui apparaissent 5-7 jours après l’événement (effet de délai). Ces deux effets sont considérés comme des liens entre les processus de consolidation de la mémoire et la formation du rêve. Cette courbe temporelle a été observée pour une variété de stimuli expérimentaux. Cependant, aucune étude à date n’a démontré que le contenu des rêves réagit aux événements diurnes d’une manière plus générale et non-spécifique. Le but de notre étude était d’examiner si deux événements qualitativement distincts, un séjour nocturne au laboratoire (LAB), considéré comme un événement interpersonnel, et une tâche de réalité virtuelle (RV), considérée comme un événement non-interpersonnel, sont intégrés de façon différente dans le contenu onirique. Selon nos hypothèses, 1) les éléments spécifiques liés au LAB et à RV seraient incorporés dans les rêves avec des patrons tendances temporels différents, et 2) les incorporations spécifiques seraient associées à des changements plus généraux dans le locus de contrôle (LoC) du rêve. Vingt-six participants ont passé une nuit dans le laboratoire, ont été exposé à une tâche de RV, et ont rempli un journal de rêve pendant 10 jours. Les rapports de rêve ont été cotés pour les éléments spécifiques portant sur LAB et sur RV, et pour l'évolution générale de LoC du rêve. Nos deux hypothèses ont été confirmées: 1) les incorporations de LAB et RV sont négativement corrélées et apparaissent dans le rêve selon des modèles temporels différents. Les incorporations du LAB ont suivi une courbe sinusoïdale en forme de U, avec un effet de résidu diurne et un effet de délai. Les incorporations de RV ont suivi un patron différent, et ont eu un maximum d’incorporations au jour 4. 2) les scores du LoC du rêve étaient plus externes pour le jour 1 (max incorporations du LAB) et plus internes pour le jour 4 (max incorporations de RV). Ces modèles d'incorporation distincts peuvent refléter des différences dans la façon dont les deux événements ont été traités par les processus de consolidation de la mémoire. Dans ce cas, une expérience interpersonnelle (LAB) était incorporée plus tôt dans le temps. Les résultats suggèrent que LoC du rêve reflète les processus de mémoire plus généraux, qui affectent le contenu du rêve entier, et qui sont partiellement indépendants des incorporations spécifiques.

Right to asylum and border control : implications of european union policies on access to EU territory of people in need of international protection

Depuis plusieurs années, les États membres de l’Union européenne (UE) se soumettent à des politiques restrictives, en matière d’asile, qui les contraignent à respecter leur engagement de protéger les personnes qui fuient la persécution. Plusieurs politiques de dissuasion de l’UE sont controversées. Certaines ont d’abord été élaborées dans différents États, avant que l’UE ne mette en place une politique commune en matière d’asile. Certaines des ces politiques migratoires ont été copiées, et ont un effet négatif sur la transformation des procédures d’asile et du droit des réfugiés dans d’autres pays, tel le Canada. En raison des normes minimales imposées par la législation de l’UE, les États membres adoptent des politiques et instaurent des pratiques, qui sont mises en doute et sont critiquées par l’UNHCR et les ONG, quant au respect des obligations internationales à l'égard des droits de la personne. Parmi les politiques et les pratiques les plus critiquées certaines touchent le secteur du contrôle frontalier. En tentant de remédier à l’abolition des frontières internes, les États membres imposent aux demandeurs d’asile des barrières migratoires quasi impossibles à surmonter. Les forçant ainsi à s’entasser dans des centres de migration, au nord de l’Afrique, à rebrousser chemin ou encore à mourir en haute mer.

Design and Control of an Anthropomorphic Robotic Finger with Multi-point Tactile Sensation

The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with a simple tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an %engineered analog of the human hand with a complete haptic system.

Autonomous underwater vehicle control using reinforcement learning policy search methods

Autonomous underwater vehicles (AUV) represent a challenging control problem with complex, noisy, dynamics. Nowadays, not only the continuous scientific advances in underwater robotics but the increasing number of subsea missions and its complexity ask for an automatization of submarine processes. This paper proposes a high-level control system for solving the action selection problem of an autonomous robot. The system is characterized by the use of reinforcement learning direct policy search methods (RLDPS) for learning the internal state/action mapping of some behaviors. We demonstrate its feasibility with simulated experiments using the model of our underwater robot URIS in a target following task

Towards Direct Policy Search Reinforcement Learning for Robot Control

This paper proposes a high-level reinforcement learning (RL) control system for solving the action selection problem of an autonomous robot. Although the dominant approach, when using RL, has been to apply value function based algorithms, the system here detailed is characterized by the use of direct policy search methods. Rather than approximating a value function, these methodologies approximate a policy using an independent function approximator with its own parameters, trying to maximize the future expected reward. The policy based algorithm presented in this paper is used for learning the internal state/action mapping of a behavior. In this preliminary work, we demonstrate its feasibility with simulated experiments using the underwater robot GARBI in a target reaching task

Implementación de buenas prácticas logísticas en el marco de seguridad industrial, almacenamiento y gestión del control de inventarios en la empresa Yokomotos

Con este trabajo se pretende generar una implementación de una mejora logística que agregue valor, aumente la eficiencia y mejore los procesos de almacenamiento y distribución, gestión del control de inventarios y seguridad industrial de la empresa YOKOMOTOS. Se realizó un estudio profundo de la situación y los problemas que tiene actualmente la empresa. Todo esto con el fin de dar resultados que diferencien a esta compañía en el mercado de los repuestos para motos, obteniendo mayor prestigio y reconocimiento a nivel latinoamericano. De igual forma se establecieron las posibles soluciones que permitieran mitigar estos problemas, mejorando los procesos en el área de almacenamiento, sistema de inventarios y seguridad industrial. Se realizaron diferentes pruebas piloto para analizar la viabilidad de nuestras soluciones, analizando espacios, tiempos y costos. Por último se implementó la mejor solución la cual se ajustó respondiendo a los requerimientos de la compañía, mejorando así los procesos de almacenamiento y distribución agregándole valor a su cadena.

Establecimiento de un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos durante 2009

Dentro de las actividades para el control de calidad en el laboratorio, los resultados finales de un analito en particular son considerados productos intermedios, dada la pertinencia otorgada al aseguramiento de la calidad como fin último de los programas de gestión de la calidad. Esta concepción precisa el establecimiento de instrumentos integrales para la detección de eventos como la contaminación cruzada y la adopción de medidas para evitar que se afecte la marcha analítica. Objetivo: el objetivo principal fue establecer un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos. Materiales y métodos: la metodología empleada consistió en desarrollar diagramas de flujo para los procedimientos sobre el control de las poblaciones de mesófilos aerobios y mohos provenientes de la contaminación en los ambientes, superficies, material estéril y medios de cultivos. Dichos diagramas incluyeron un árbol de decisiones, diseñado para efectuar acciones de control con base en los intervalos de tolerancia, establecidos como herramienta objetiva hacia la toma de decisiones que normalicen los recuentos de las poblaciones microbianas en cuestión. Resultados: los límites de alerta más estrictos se obtuvieron para las poblaciones de mesófilos aerobios y mohos en los diferentes controles, excepto para el ambiente del área de preparación de medios y los correspondientes al material estéril. Conclusión: el proceso desarrollado permitió complementar el sistema de control de calidad interno en el laboratorio, al disponer de un medio objetivo para el cierre de no conformidades por contaminación cruzada.

Eficacia del control fiscal en Colombia a la luz del derecho comparado de su historia y de sus relaciones interinstitucionales

El estudio del papel que desempeñan las Contralorías debe abordarse desde la premisa de su ubicación constitucional, dentro del conjunto de controles al ejercicio del poder político, sistema en el cual se ubica el control fiscal

Diferencias individuales y desarrollo de habilidades de liderazgo : el rol del locus de control

El presente proyecto se ha elaborado con la finalidad de encontrar la relación existente entre el liderazgo y el locus de control, por medio de una revisión documental que permita dar una visión más amplia de estos dos fenómenos. De acuerdo con investigaciones realizadas, existen características individuales que afectan el desarrollo de liderazgo, lo cual a su vez tiene un impacto sobre el comportamiento de los individuos dentro de una sociedad. Uno de estos factores es el locus de control, el cual sesta determinado por características del individuo, y por el ambiente en el cual se desenvuelven las personas. Existen diferentes evidencias que soportan ésta relación entre locus de control y liderazgo. En éste estudio documental se describirán estos hallazgos, identificando las características del individuo y del contexto que influyen sobre ellos. Asimismo se pondrá en contexto a través del trabajo las características principales de los líderes y como se presentan las interacciones entre los lideres y seguidores, teniendo en cuenta que no todas las veces los seguidores desarrollan este papel al seguir a su líder, sino que por otro lado y estos pueden tomar parte fundamental en la interacción, influyendo de manera directa sobre el líder. Se recuerda que a los lideres los hacen sus seguidores y que sin estos no podrían desarrollar el papel de líder.

Failure of a control strategy for a hybrid air-conditioning and wind catchers/towers system at Bluewater shopping malls in Kent

Purpose – To evaluate the control strategy for a hybrid natural ventilation wind catchers and air-conditioning system and to assess the contribution of wind catchers to indoor air environments and energy savings if any. Design/methodology/approach – Most of the modeling techniques for assessing wind catchers performance are theoretical. Post-occupancy evaluation studies of buildings will provide an insight into the operation of these building components and help to inform facilities managers. A case study for POE was presented in this paper. Findings – The monitoring of the summer and winter month operations showed that the indoor air quality parameters were kept within the design target range. The design control strategy failed to record data regarding the operation, opening time and position of wind catchers system. Though the implemented control strategy was working effectively in monitoring the operation of mechanical ventilation systems, i.e. AHU, did not integrate the wind catchers with the mechanical ventilation system. Research limitations/implications – Owing to short-falls in the control strategy implemented in this project, it was found difficult to quantify and verify the contribution of the wind catchers to the internal conditions and, hence, energy savings. Practical implications – Controlling the operation of the wind catchers via the AHU will lead to isolation of the wind catchers in the event of malfunctioning of the AHU. Wind catchers will contribute to the ventilation of space, particularly in the summer months. Originality/value – This paper demonstrates the value of POE as indispensable tool for FM professionals. It further provides insight into the application of natural ventilation systems in building for healthier indoor environments at lower energy cost. The design of the control strategy for natural ventilation and air-conditioning should be considered at the design stage involving the FM personnel.

Impedance control of redundant drive joints with double actuation

This paper proposes impedance control of redundant drive joints with double actuation (RDJ-DA) to produce compliant motions with the future goal of higher bandwidth. First, to reduce joint inertia, a double-input-single-output mechanism with one internal degree of freedom (DOF) is presented as part of the basic structure of the RDJ-DA. Next, the basic structure of RDJ-DA is further explained and its dynamics and statics are derived. Then, the impedance control scheme of RDJ-DA to produce compliant motions is proposed and the validity of the proposed controller is investigated using numerical examples.

Inverse model control using recurrent networks

This paper illustrates how internal model control of nonlinear processes can be achieved by recurrent neural networks, e.g. fully connected Hopfield networks. It is shown that using results developed by Kambhampati et al. (1995), that once a recurrent network model of a nonlinear system has been produced, a controller can be produced which consists of the network comprising the inverse of the model and a filter. Thus, the network providing control for the nonlinear system does not require any training after it has been trained to model the nonlinear system. Stability and other issues of importance for nonlinear control systems are also discussed.

Incorporating HACCP into national food control systems - Analyzing progress in the United Arab Emirates

Today governments and other parties involved in food control are under constant pressure to find more efficient and effective mechanisms to carry out their mandates for food control. This has led to international recognition of the importance of the HACCP system as a food control tool and guidance on the role of government agencies in the application of such a system has been developed. Based on this international guidance, four main elements identified as key activities have been used in this study to evaluate the progress of HACCP implementation in the UAE. The internal Strengths and Weaknesses, as well as the external Opportunities and Threats that the government is facing towards the implementation of a HACCP-based food control system have been identified. The analysis shows that the government’s dedicated role has been an essential driving force to encourage the implementation of a HACCP-based food control system. Some areas of difficulty, including the dependence on high levels of food imports, are highlighted.

Organisational semiotics methods to assess organisational readiness for internal use of social media

The paper presents organisational semiotics (OS) as an approach for identifying organisational readiness factors for internal use of social media within information intensive organisations (IIO). The paper examines OS methods, such as organisational morphology, containment analysis and collateral analysis to reveal factors of readiness within an organisation. These models also help to identify the essential patterns of activities needed for social media use within an organisation, which can provide a basis for future analysis. The findings confirmed many of the factors, previously identified in literature, while also revealing new factors using OS methods. The factors for organisational readiness for internal use of social media include resources, organisational climate, processes, motivational readiness, benefit and organisational control factors. Organisational control factors revealed are security/privacy, policies, communication procedures, accountability and fallback.